Process chains: error when including CVC generation process type

hello all !
I have a Pc that loads data from custom extractor into a Icube.
next triggers Generate Characteristic combination which never executes. Status remains active but no "completed succesfully" (yellow triangle) in monitor of pc.
When I run it alone the CVC generation process types executes OK...??!!!
My sequence is Delete Index from cube ---> Load IP --> Atribute change run ---> Create Index --> Delete overlapping request (up to hear loads oK although status never becomes green '??)
final step is a CVC generation + adjust time series process type.
Does any of you know why the error ? and how to help solving it out ?
appreciate all yur comments

Hi Samir,
I guess you can directly go to RSA1->Source Systems.Rt click and Transfer Global Settings then Delete the Red Request and Go to the Particular Process chain and do a Repeat/Repair.
You can try repairing it...
Rest of your question is not clear.... Give me ur number, will call you, then we will discuss
Rgrds,
Habeeb

Similar Messages

  • Process Chain error while loading CVC's into planning book

    Hi I am trying to run the process chain and till half chain it was good and at one place after VMI Generate CVC's there is a box showing in RED and it is Load Infocube and when i checked it in batch processing it says end with errors and I could'nt find exactly what to do to run the entire process chain. Please anybody can tell me how can i resolve this issue.
    Thanks
    Hari

    Hi Senthil,
    For Some of the SKUs it is giving the Error , some abrupt values are stored in Live Cache for these SKUs(CVC), thats why it giving the Error.
    The only solution is ..i have to delete the CVCs and create new one...
    But i will loose the data as we cant take the Backup of Old CVC data  --> Giving COM Error
    The reason of Abrupt  Values in Live Cache  Could Be -->.>
    Macro/Alerts
    How can we fix these types of Error , as regularly i am getting these Error??
    Is there any Note/Patch to overcome this issue?
    Will be GR8 if i will get the solution..
    Regards,
    Rajesh Patil

  • Error in Including Roll Up Process Type into Process Chain

    Dear Experts,
       On BI 7.0, I found an error, when including the Roll Up Process Type into my process chain. The sequence of my first process chain looks like this.
    Start -> Execute Infopackage -> Execute DTP to load data to DSO -> Delete Cube Index -> Execute DTP to load data to cube -> Create Cube Index -> Roll Up
       I found this error when activating the process chain
    'No type "Delete Index" process can be in front of process "Roll Up of Filled Aggregates/BIA Indexes" variable ROLLUP_ZHRF_C04
    Then, after looking through the forum, I found someone suggest using 'Initial Fill' before 'Roll Up'. I followed his sugguestion, so my second process chain looks like this.
    Start -> Execute Infopackage -> Execute DTP to load data to DSO -> Delete Cube Index -> Execute DTP to load data to cube -> Create Cube Index -> Initial Fill -> Roll Up
    The same message is shown; however, this time it just a warning message instead of the error msg.
    1) How can I solve this problem?
    2) In which sequence of process types I should take for my process chain?
    3) Must I always use the Initial Fill before the Roll Up in the process chain?

    Hello,
    This issue is with patch 16 of BI. The only solution i think is you need to create a local chain with start process -> rollup and include all the roll up cubes in that variant and include this local chain at the end of the main chain. Hope this helps.
    REgds,
    Shashank

  • Error when creatiing transport for process chain

    Hi Experts,
    I am trying to create a transport for a process chain, but when i click on the red truck i get the following error:  Error in Object Editing: Edit objects seperately since they belong to different original systems.
    Can you please advise me on how to resolve this issue? Thanks in advance.

    Has this process chain or some components of it (for example IPAK) been brought from some other system?
    Try collecting all the objects in RSA1/Transport connection - and see the directory entries for each subobject (txnSE03 or TADIR table). You may have to either change the source system for some objects (in SE03) or split the transport objects manually into multiple transports.

  • What are the varoius type of process chain errors how we can solve them.

    Hi,
    I  need to work with process chains maintainace , Can any body tell me what are the different type of process chain errors generelly we used to get ,how we can solve them . IF possible  please provide me any document also  so that i can solve my
    abnormal problems for process chain errors.
    Thanks in advance .

    Hi,
    1) Invalid characters while loading: When you are loading data then you may get some special characters like @#$%...e.t.c.then BW will throw an error like Invalid characters then you need to go through this RSKC transaction and enter all the Invalid chars and execute. It will store this data in RSALLOWEDCHAR table. Then reload the data. You won't get any error because now these are eligible chars done by RSKC.
    2) IDOC Or TRFC Error: We can see the following error at u201CStatusu201D Screen:Sending packages from OLTP to BW lead to errorsDiagnosisNo IDocs could be sent to the SAP BW using RFC.System responseThere are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of the SAP BW.Further analysis:Check the TRFC log.You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".Removing errors:If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.Action to be taken:If Source System connection is OK Reload the Data.
    For more errors and solutions go thorugh the link below
    http://indelasap.blogspot.com/2009/04/sap-bi-production-support-issues.html
    Regards,
    Marasa.

  • What are some of the process chain errors one comes across?

    hi friends
    What are some of the process chain errors one comes across?

    Hello Kiran,
    Here are some of the errors that come across...
    -> Rollup not possible, no filled aggregates available
    -> Error when starting the extraction program
    -> The process step locked by another changerun
    -> Info objet does not contain alpha confirming values
    -> Errors due to non activated objects
    -> Errors due to duplicate records
    -> Errors due to locking
    -> Problems because of connection problem between source and bw systems
    -> Problems due to RFC
    Hope this helps you
    Cheers
    SRS

  • Common Process chain errors

    Hi friends,
    Can u please explain cause of below errors in process chain and how to rectify the problem ?
    1. Deadlock error.
    2. Error in unit conversion
    3.Error 1 in update
    4.Processing no data
    5.Caller 70 missing
    6.Idoc not processed completely.
    Thanks...
    Bala

    Hi,
    /people/mona.kapur/blog/2008/01/14/process-chain-errors
    Deadlock
    http://help.sap.com/saphelp_nw04s/helpdata/en/2e/44934257a5c86ae10000000a155106/frameset.htm
    Dead Locks
    2. Error in unit conversion
    \Units of measure
    3.Error 1 in update
    When Src file is already open or not accessible.
    4.Processing no data
    theres no data selected after extraction
    5.Caller 70 missing
    "• This error normally occurs whenever BW encounters error and is not able to classify them. There could be multiple reasons for the same
    1) Whenever we are loading the Master Data for the first time, it creates SID’s. If system is unable to create SIDs for the records in the Data packet, we can get this error message.
    2) If the Indexes of the cube are not deleted, then it may happen that the system may give the caller 70 error.
    3)Whenever we are trying to load the Transactional data which has master data as one of the Characteristics and the value does not exist in Master Data table we get this error. System can have difficultly in creating SIDs for the Master Data and also load the transactional data.
    4) If ODS activation is taking place and at the same time there is another ODS activation running parallel then in that case it may happen that the system may classify the error as caller 70. As there were no processes free for that ODS Activation.
    5) It also occurs whenever there is a Read/Write occurring in the Active Data Table of ODS. For example if activation is happening for an ODS and at the same time the data loading is also taking place to the same ODS, then system may classify the error as caller 70.
    6) It is a system error which can be seen under
    the “Status” tab in the Job Over View.
    solution:
    "• If the Master Data is getting loaded for the first time then in that case we can reduce the Data Package size and load the Info Package. Processing sometimes is based on the size of Data Package. Hence we can reduce the data package size and then reload the data again. We can also try to split the data load into different data loads
    • If the error occurs in the cube load then we can try to delete the indexes of the cube and then reload the data again.
    • If we are trying to load the Transactional and Master Data together and this error occurs then we can reduce the size of the Data Package and try reloading, as system may be finding it difficult to create SID’s and load data at the same time. Or we can load the Master Data first and then load Tranactional Data
    • If the error is happening while ODS activation cause of no processes free, or available for processing the ODS activation, then we can define processes in the T Code RSCUSTA2.
    • If error is occurring due to Read/Write in ODS then we need to make changes in the schedule time of the data loading.
    • Once we are sure that the data has not been extracted completely, we can then go ahead and delete the red request from the manage tab in the InfoProvider. Re-trigger the InfoPackage again.
    • Monitor the load for successful completion, and complete the further loads if any in the Process Chain.
    6.Idoc not processed completely.
    Here the request remains yellow (in process) and with the same details (as seen in the details tab of the monitor) for an abnormally long time. Many-a-times, the port for communication is not open and re-starting the load helps. For long running jobs, it may not be advisable to restart the extraction               
    Contact the BASIS administrator to push the IDOC.                         
    Thanks

  • Step by Step documents for Process Chain Error Handling with Screen Shots

    Hi
    Is anybody having Step By Step Documents for Process Chain Error Handling with Screen Shots ?. Please forward it to me to my e-mail [email protected] .  I will reward points to u immediately.
    bye
    Aamira Khan

    Hi,
    You can find lots of topic related to process chain issues in SDN.Please make a search in SDN.
    https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_library&query=process+chain&adv=true&sdn_author_name=&sdn_updated_on_comparator=ge&sdn_updated_on=&sortby=cm_rnd_rankvalue
    Regards.

  • Process chains errors

    Hi,
    Any one can plz send the process chain errors in BI.I am in support so plz give some process chain errors.
    sekhar.
    Bye.

    Hello Sekhar,
    Please find the links might be it can help you..
    Re: Process chain error for infopackage
    process chains errors
    http://help.sap.com/saphelp_nw70/helpdata/en/d3/53e03b8235953ee10000000a114084/content.htm
    Please search in SDN you find more help..
    Thanks,
    Geeta

  • Process chains:Errors Occured..

    i have selected my info objects 0CRM_PROD in rsa1 and  i entered CALL MONITOR FOR BI OBJECT and then i got a monitor screen in that succesfull(42) it says...in that i have selected 0PRODUCT  > TODAY DATE>
    I FOUND THAT CR1 LIENT 100
        02:04:56 (4 From 4 Records)i entered twise on this and i got HEADER  STATUS   DETAILS tabs...
    in above DETAILS tab
    we got a red colour in
    Process chains : Error Occured
    MD : Business partner & Product
    like this... can u please suggest me the resolution for this...
    please help me in this regard , thanks

    Hi -
    Please check
    1) Do you have any Red request
    2) Did you run delta twice
    Regards
    Astoria

  • Error when attempting to get processing resources: com.sap.aii.af.service.

    Dear All,
    i am getting below error in RWB in receiver Channel
    Error
    "Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when attempting to get processing resources: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Cannot establish connection to URL 'CONNECTION STRING: NoClassDefFoundError: sun.awt.X11GraphicsEnvironment (initialization failure)"
    Note: outbound has processed succesfully in both ABAP and Java Stack.

    Hi,
    Can you please let us know, which receiver adapter are you using??
    I guess it is JDBC: IF it is ...can you check the Driver and Connection details maintained on the channel.
    JDBC Driver:com.microsoft.sqlserver.jdbc.SQLServerDriver
    CONNECTION:jdbc:sqlserver://IP ADDRESS:PORT;Database=HOST NAME;
    -Rahul

  • Process chain error in BI7.0

    Hai
    Im trying to load the data from the flat file to DataStoreobject in BI 7.0 by using the process chain .
    I build the process chain like below
    start process -> infopackag -> DataTransferProcess -> ODS activation data.
    Then i chek the process chain . then it is ok .
    Then i activate the process chain and then i schedule the process chain .
    Then it gives 'job higher priority A'  , 'Job higher priority B' , 'Standard Priority C' . Then i select the 'Standard priority C'.
    Then im getting the following error saying that
    <b>Job BI_PROCESS_DTP_LOAD could not be scheduled. Termination with returncode 8</b>
    Then i looked into ST22 . i got the following error <b>MESSAGE_TYPE_X</b>
    Please give me the solution.
    kumar

    Hi
    For this error return code 8 go to T-code SU 01 in that select copy icon then give copy from sapuser to ALEREMOTE
    . eventhough it will occurs go to SU01 copy from ALEREMOTE then in that give profiles ok if its ok give to  me points
    Thanks
    Hanu
    Edited by: chitluru hanumanthu on Jun 19, 2008 5:12 PM

  • Process chain hangs when reaching AND process before Attribute Change Run

    Hi Experts,
    I have the following problem. For some reason my master data attribute process chain hangs when it reaches the AND process variant right before the Attribute Change Run. It does not go anywhere from that point.
    Thank you

    hi AG,
    if this is hanging daily at the same place without proceeding further, and with out giving the instance for the same. then the better way is to replace that AND process in the chain with the new AND process. and then check and activate ur chain. this wil solve ur problem.
    if this is the first time that happend to u, then check the previous load status, if any of the load has failed and u didnt turned the status of the process then also this can happen. So please do check it and act accordingly. If u cannt find the resolution then please run ur changerun manually.
    u can use RSPC_PRCESS_FINISH FM to convert the status of any process. for this u need to give instance and variant details. and then if u execute, then chain will continue further.
    Hope this will help you.
    thanks
    Vishnu

  • Flat file upload in Process Chain error!

    Dear Expert:
       We wirte routine in infopackage and use ftp upload flat file from BW Application server(AL11--> can open the file), I manually upload, it can sucessful upload, but in Process chain, it always deal with the process and display yellow light. I must manually stop the job.
    any sugession for me? thank you very much!
    Best Regards
    Bessie

    Dear all:
        I found the way to slove this problem. in the Routine, i create a  TCP/IP connection. I adjust it manually in SM59.
      At "Technical Setting" Tab:
    Set Activation Type: Start on Application Server.
    Set Start type of External Program: Remote Execution
    That's OK!
    Thank you for your feedback!
    Bessie

  • Need a table for process chains of when these are scheduled!!

    Hi,
    I had like to have list of all the process chains and their schedules of how often these are loaded and whether been triggered by event or directly scheduled. If periodically scheduled then the period----
    is there any table which can have the information as i said??
    Raj

    Hi....
    process chain tables
    RSPC_BUFFER Shared Buffer for Processes (Esp. Customer
    RSPC_MONITOR Monitor individual process chains
    RSPCABAPASYNC Logging for ABAP Processes(Synchronously a
    RSPCCATEGORY Process Type Categories
    RSPCCATEGORYT Texts for Category
    RSPCCHAIN Process chain
    RSPCCHAINATTR Attributes for a Process Chain
    RSPCCHAINEVENTS Multiple Events with Process Chains
    RSPCCHAINT Texts for Chain
    RSPCCOMMANDLOG System Command Execution Logs (Process Cha
    RSPCENQUEUE Dummy Table for Runtime Locks of a Process
    RSPCEXOR Excluding Or: Log Table
    RSPCINFO Special Values for Communication between P
    RSPCINFOT Special Values for Communication between P
    RSPCINSTANCE Generic Instance Storage
    RSPCINSTANCET Texts for Generic Instance-Storage
    RSPCLOGCHAIN Cross-Table Log ID / Chain ID
    RSPCLOGCROSS Cross-Table Log ID Old / Log ID New
    RSPCLOGS Application Logs for the Process Chains (G
    RSPCPROCESSLOG Logs for the Chain Runs
    RSPCRUNVARIABLES Variables for Process Chains for Runtime
    RSPCTRIGGER Variants for the Trigger Processes
    RSPCTRIGGERT Texts for the Trigger Variants
    RSPCTYPESDEP Dependencies for Processes
    RSPCTYPESPROC Attributes of BW processes (RSSM)
    RSPCVARIANT Generic Variant-Storage
    RSPCVARIANTATTR Attributes of a Process Variant
    RSPCVARIANTT Texts for Generic Variant Storage
    Among all these tables I think.......
    RSPCCHAINATTR Attributes for a Process Chain
    RSPCCHAINEVENTS Multiple Events with Process
    Chains
    RSPCPROCESSLOG Logs for the Chain Runs .........can help you.......
    Regards,
    Debjani........
    Edited by: Debjani  Mukherjee on Oct 21, 2008 1:32 PM

Maybe you are looking for