Process Chains for BW Statistics (Technical Content)

Hi Guys,
Just a quick question - anyone know of any Business Content Process Chains for BW Statistics?
I can't seem to find any - but just looking for confirmation that none exist and I will then have to built my own.
Thanks
Scott

Hi,
Yes, you have to build your own. Thats the same scenario we faced too.
With Regards

Similar Messages

Why process chains for BI statistics Technical Content are not showing in 0

I am looking into 0TCT_MC21 which shows process statistics from 0TCT_C21 and 0TC_VC21.
I know process chains such as 0TCT_C2_DELTA_PO1, 0TCT_C2_INIT_PO1 have been run, yet
They do not show in 0TCT_MC21 which included real time data (via virtual cube) as well as
Collected data 0TCT_C21u2026
Do I have to specify somewhere on which process chains statistics are to be collected, if yes, how??
Thanks.

Hi,
Have you checked this existing thread:
/message/3214515#3214515 [original link is broken]
Regards,
Lee

BI Statistics Technical Content Activation Error

I got some errors when activating BI Statistics technical content in SPRO and could not find any information about this error on SDN. I would really appreciate your help.
Thank you.
Tony
Below is part of the error message from job log:
Variant '0PAK_472D695A0ZS3DWVBA4H1OO9A6' of process type 'LOADING' not found in A version
A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
A type "Activate DataStore Object Data" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in th
A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_E8U9KCLMI7HW76ZSYTSL0N7NA in the chain
A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_E8U9KCLMI7HW76ZSYTSL0N7NA in the chain
A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_EAYZPOK7VL8KCD6D6HI3UYUT2 in the chain
A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_EAYZPOK7VL8KCD6D6HI3UYUT2 in the chain
A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_44I75TQHBEZKMPJT67XC0VKQJ in the chain
Version 'M' of chain 0TCT_C0_DELTA_P01 was saved without checking
InfoPackage no longer exists in object version A in table RSLDPIO
Variant '0PAK_472D695A0ZS3DWVBA4H1OO9A6' of process type 'LOADING' not found in A version
A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
Version 'M' of chain 0TCT_C0_DELTA_P01 was saved without checking
Start of Process Chains
ABAP/4 processor: UNCAUGHT_EXCEPTION
Job cancelled

Hi Ramesh,
That's the point. Admin cockpit pops up a message:
"Before you can call the BI Administration Cockpit, the technical content has to be installed and customized."

PROCESS CHAIN FOR REAL TIME DATA AQUISITION

hi,
how can i create a process chain for dso which is getting data from xi push
i created a deamon which is having both infopackage and reat time dtp
now i want to close the request for 24 hours
i have 10 dso's in this way
how to create process chain for this?

hi,
how can i create a process chain for dso which is getting data from xi push
i created a deamon which is having both infopackage and reat time dtp
now i want to close the request for 24 hours
i have 10 dso's in this way
how to create process chain for this?

Problem in creating process chains for CO

Hi Friends,
                 I have a CO cube "0OPA_C11" getting data from Three datasources,
those are 0CO_OM_OPA_6(supports delta), 0CO_OM_OPA_1(full only), 0CO_OM_OPA_2(full only), i have already created process chain to this cube using these three datasources, the chain is like this,
1. delete indexes
2.0CO_OM_OPA_6(supports delta
3.0CO_OM_OPA_1(full only),
4.0CO_OM_OPA_1(request overlapping)
5.0CO_OM_OPA_2(full only),
6.0CO_OM_OPA_2(request overlapping)
7.create indexes
        Is it right? here the chain is running, after completion of that, in manage of cube, it is showing only the request for 0CO_OM_OPA_2(full only), the request which were there earlier like Init request and new delta request for .0CO_OM_OPA_6, full request for 0CO_OM_OPA_1 are getting deleted, it is showing the request only for 0CO_OM_OPA_2,
the way how i created the process chain is right or wrong? can anybody give me the solution?
Thanx in Advance
BalajiReddy

Hi Nick,
          Thanx for your reply, everthing is ok what you've asked me to check, i think there is certain scenario to create the process chains for the data targets, which are getting data from multiple datasources, which support delta's as well as full.
          I want that scenario, can you tell me? or can anybody tell me?
The right points are assigned to the right answers.
Thanx in advance
balajireddy

Error in Process chain for CO-PC

Dear ALL
I am facing one problem.I have a process chain for CO-PC cost object controlling.In that after start process i have another process chain Manufacturing order.After this other processes are there.Upto 4th march i have the delta running fine.After that the manufacturing order PC is failing when i open the process chain i find its failing in DTP section.
Now what i did is i run the DTP for manufacturing order actually it consist of ATTRIBUTES AND TEXTS.After finishing i find in manage that the records are transferred but 0 records added and when i find the log its saying
@5C@ 0PRODORDER : Data record 1 ('000001000000 ') : Duplicate data record RSDMD 191
Thanks in Advance

Hi,
Check below these links for more business knowledge about CO-PC.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/COPCIS/COPCIS.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6.
Regards,
Praveena.

Error in Process Chain for Delta pack

Hi All,
Here I am facing error in process chain for delta pack.
Error:
Last delta upload not yet completed. Cancel I
Please send me the solution asap.
Thanks

Hi,
This message means there may be a load triggered by the same infopackage that may be still running or may be still having yellow status. Go to the monitor screen from this IP itself and it will show the paricular request (it will be the latest one). See if that load is active and running. If its active try to find out if load is happening, if its happening you may let it progress. If its not active you need to force the status to red and delete from the target. Once this is done you can retrigger the load. If its a datamart load you may need to reset the data mart status before the triggering the load.
Refer
Last delta update is not yet completed
Last delta update not yet completed-PC Chain Error
Last Delta Not Yet Completed
This is the same issue as yours.
Thanks,
JituK

Process Chain for Consolidation Functions

Hi Team,
We have created a process chain for consolidation function as required by client, but we want the process chain to check the preceding task status and only on successfully completion it should proceed to next task. Is there a standard program or function module which does this, please update.
Also we would like to pass dynamic permanent parameter values for the variants of task.
Thanks in advance.
Kind Regards
Sridhar

Hi Collet,
We have created a process chain as below:
Period Initialization - Data Collection -LDS - Calculation of RE - Validation of RFD - Interunit Elimination -COI.
I have created the Separate variants for each of the above functions with program UCBATCH01.and the process chain is working fine.
But we want the process chain to check the task status before it proceed to next task execution and stop if any error occurs in the task. Also we want the dynamic selection of parameters from Permanent Parameters of Consolidation Monitor.
Kind Regards
sridhar

How to create process chain for 0EMPLOYEE

I want to create process chain for 0EMPLOYEE attribution and text, how to create it and make a schedule for daily loading? Could anyone write steps in my case? Thanks!

Hi,
Follow the following steps:
1. Go to RSPC->create->give name and disc of your chain.
Start Variant Creation
2. Now you will be prompted to give a start variant,create a new variant(click on page icon )
3.Change Selections->date/ time.
4.give date and time for start of the chain.
5.click the check box for periodic job->period values->daily->save->save
Addition of process types
6.Select the process type "Execute Infopackage"
7.select the name of the infopackage which loads attr data to 0EMPLOYEE.
8.Attribute Change run will come automatically( if not then drag it as well and create variant )
9.select the name of the infopackage which loads text data to 0EMPLOYEE.
10.Attribute change run wil again follow.
(connect the process types which are not connected,by right clicking the process types )
                             start
                       IP A     IP T
                      attr          attr
A = attribute
T = Text
Please Reward points if useful
Manish

How to create process chains for Master Data?

I need information on " how we can create process Chains for Master Data"

Hi Sachin,
http://help.sap.com/saphelp_bw33/helpdata/en/ad/6b023b6069d22ee10000000a11402f/frameset.htm
and also Modelling aspects in process chains (ppt)
https://websmp109.sap-ag.de/~sapidb/011000358700002337702003
Hope this helps.
Srini

How to Create Process Chain for Remote Cube.

Hi,
I created Remote info cube, data from ECC, loaded Successfully, I want to create Process Chain for Reomte Cube, Please Help me.
Thanks,
Nandish Gowda

Hi Nandish,
After initialization, th next delta will come as per your delta nature, if it is 0calday: Then your next delta will come tomorrow only.
If you are able to 7 records in RSA3, why not in PSA( Why it's only 5 records). Analyze this closely.
Sometimes, RSA3 exactly doesn't match with PSA because, RSA3 works on update mode F.
Regards,
Suman

HOW TO CREATE PROCESS CHAIN FOR PSA ARCHIVING

SDN EXPERTS,
i like to create process chain for archiving. but i dont see any event for archiving when i go to create a process chain for PSA archiving. please let me know.
thanks

Hi,
In the below document on the 14th page it says it is not possible to archive the master data & PSA.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f47fec9f-0501-0010-ce84-8a7231715ae6
As per my understanding..
But one thing you can do is use another ODS and load the same data that you're loading to something else and try to archive that data(Only if you have transformations in the current CUBE/ODS).
Correct me if i was wrong and eloborate your requirement.
Regards, Siva

How to create Process chain for Aggregate for Master data

Hello friends,
I created Aggregates on Navigational Attributes.
Now they are working fine, but i need to know that how shall i create the Roll up for Aggregates on Navigational Attributes.
The point is the master data changes frequently a lot of time for e.g. for 0customer etc.....
So if any one can send me the step by step documents so as to know how to roll up the Aggregates for Navigation attributes or for aggregates created on Master data....
How to create process chains for the same ?????????
Because if master data changes, then rolling up the aggregates straight forward will not help.
So we need to write a process chain so that it deactivates the aggregate and reactivate again and fill up again..........
If i mis interpreted something please rectify it.......
Please advise

Hello,
the changerun that you have to schedule in order to activate the master data will adjust the aggregates automatically. There is no need to deactivate them after master data loads.
Best regards,
Ralf

CORUPROC (Process chain for confirmation, collective background processing)

Hello Guru,
Can you please explain me the program CORUPROC (Process chain for confirmation, collective background processing) that can be use in SE38. and how it its important for CO16N (Reprocessing Incorrect Production Order)?
CORUPROC is also the same as CO1P transaction code.
Please explain the use of this program.
Thanks
Edited by: Ryan on Feb 3, 2009 7:55 AM

Hi Carina,
It might take some time for the attribute change run.
what you can do is right click on th running process , go to display messages and check if every thing is fine.
also goto batch monitor from there and see if the job is still running.
alternatively, if you are not sure if the job got strucked up, kill the job from batch monitor and run the attribute change run manually.
you got two options two do now.
1)Wait for some time for the process to complete and check the messages.
2)kill the job and run att change run manually.
i suggest you to go for option 1 and if it is taking too long ar there is any error message, analyze and then go for option 2
hope this helps.
cheers,
Srinath.
Edited by: Srinath Singamsetti on Aug 4, 2009 5:44 AM

Process chains for loading data to target is not functioning

Hi SAPians,
Recently, we have upgraded the firmware on IBM P590 with the help of IBM on Saturday i.e. 06/12/2008 (The firmware of P5-590 was SF235_209. It was upgraded to SF240_XXX) and since then the process chains for loading data to targets are not functioning properly. We have stopped all the SAP services, database services & OS services from our end and services have been rebooted after firmware upgrade.
However, the problem with the process chains that load transaction data and hierarchies is solved but the chains that load master data are still not working as scheduled.
We tried to load the master data manually, by running DTP to load data to an object analysis code (attributes) the request remained YELLOW. After refreshing it several times, the request turned into RED. The error message was - PROCESSING TERMINATED (screenshot 1 attached).
To mitigate this we tried deleting the bad request and it prompted with the below message:
"Cannot lock request DTPR_4C37TCZGDUDX1PXL38LVD9CLJ of table ZANLYSIS for deletion (Message no. RSMPC178)" (screenshot 2 attached)
Please advise us how the bad request should be deleted?
Regards,
Soujanya

Hi Sowjanya,
Follow the below procedure to make yellow request to RED:
Use SE37, to execute the function module RSBM_GUI_CHANGE_USTATE
From the next screen, for I_REQUID enter that request ID and execute.
From the next screen, select 'Status Erroneous' radiobutton and continue.
This Function Module, change the status of request from Green / Yellow to RED.
Once it is RED, you can manually delete that request...
Releasing LocK
Gott Transaction Code SM12 and release the lock.
Hope It helps you.
Regardss,
Nagaraju.V

Process Chains for BW Statistics (Technical Content)

Similar Messages

Maybe you are looking for