Process chains in red(errors occurred), monitoring in green

Hi friends,I have same problems with the monitoring / process chains.
For exemples in the Monitor for OMAT_SALES in the tab Status I have green for Total and Technical with the message:
   Data successfully updated
   Diagnosis
   The request has been updated successfully.
   InfoSource : 0MAT_SALES
   Data type : Texts
   Source system: PRD-600
In the tab Details I have:
-the Overall status in red, error occures or missing messages
-the requests, extractions,transfers,processing-everything is Ok-green
-the Process Chains-errors occurred-red
In the transaction RSPC the infopackage for load data OMAT_SALES is red,the next infopackage in the chain is green.
What can I do to fix this problem for Process Chain in RSPC and also in Monitoring (tab Details)?
I will apreciate any answer,
Thanks,
Claudia

The next connected infopackage must be connected with Always link that's why its processed even after the failure node. Go and cross check what errors you got for the failed process, and reload it manually.

Similar Messages

How repeat a process step in a process chain automatically after error?

Hello guys.
Have some method to repeat automatically a process in a process chain after a error occur ?
Now, we need to make a manual procedure for repeat the process... We need make it more "fast", one "auto repeat" when failing.

Hi Leo,
Auto repeat of a process chain is always not ad visible as in most of the cases we can see the job got finished in SM37 and even spool got generated but unfortunately it will fail if any of the data package is wrong.In these cases we can skip the process chain and make it continue.
I have written a blog on the same.please go through it.i feel for those scenarios it is good.
How to override a process block in the process chain and make it force complete ?
My personal advice is to go and check the job log before repeating any process as the job may fail for n no of cases.it is a complex challenge of adding all those errors tracked.
Regards,
Kannan

PROCESS CHAIN ENDED RED

process chain Ending with error showing
Lock NOT set for: Deleting Data Completely from an InfoProvider
please help how to correct and what it means
regards

Hi,
In your process chain, you must be having a process for dropping cube contents. What happens is that, before you go to carry out any kind of updates(here updates means, adding records, changing records, deleting records) on a table, a lock would be set on the table so that no other user/ program can carry out any changes on this table.
This lock is set by using function module starting with ENQUEUE. Till this lock is active, no other program can carry out changes on this table. Then to release the lock on this table another function module DEQUEUE is used. Only after this function is finished, the table is released for changes by any other user/ program.
As you have got this error, it means that some other program was performing some tasks on this DSO/ infocube (loading data to/ from this DSO/ infocube) when your process chain reached the step to drop cube contents. Check if any other activity was being carried out for this cube/ DSO at that time. In order to avoid this from happening in future, change the timing of one of these processes.

Process Chain Ended with Errors - cause unknown

I have had several instances of process chains stopping for no apparent reason. The stops occur between 2 master data infopackage loads. The last step is green and the next is grey. The PSA table has been updated successfully for the last step. All IDocs are in green status in both systems. The monitor for the last successful step does say "Ended with Errors" although no errors are evident. The process chain starts back up via Repeat at the next (grey) step and continues successfully. There were no system problems or connection interruptions that occurred during the time the process chains failed. There were no changes in the remote user profile.
This exact problem has occurred a half dozen times since our application of ECC Support Packs several months ago and had not occurred before. The infopackages are different each time. Two different process chains have had this problem. I have re-activated and re-scheduled the process chains without solving the problem.
Thanks for any ideas on why this may be occurring or what I can do to prevent it.
Patty Moffatt

Hi Des,
Here's my BW release info:
SAP_ABA        640       0019 SAPKA64019     Cross-Application
SAP_BASIS      640       0019 SAPKB64019     SAP Basis
PI_BASIS       2005_1_6400009 SAPKIPYJ69     Basis Plug-In
ST-PI          2005_1_6400008 SAPKITLQH8     SAP Solution Tools Plug-
SAP_BW         350       0019 SAPKW35019   SAP_BW
ECC SPs 13-21 were applied before the BW problem started:
SAP_BASIS      640       0021 SAPKB64021
SAP_ABA        640       0021 SAPKA64021
PI_BASIS       2005_1_6400012 SAPKIPYJ6C
ST-PI          2005_1_6400008 SAPKITLQH8
SAP_BW         350       0021 SAPKW35021
PI             2004_1_5000016 SAPKIPZI6G
The process chain step and the monitor load both are green. The Details tab shows all the processing is green, but the Process Chain itself is red with "Errors Occurred. There have been no runtime dumps.
Patty

Process Chain Status Red, DTP status yellow, DTP is green from inside

Hello All,
I have a problem where the Process Chain status is red, but the process(DTP) status is yellow.
When I right click on the yellow process there is no error message and the DTP is green in Process Monitor.
But the chain did not complete and the rest of the process steps are grey.
After 20 minutes the Process Chain ran again(automatically after new data arrived) and this time without errors and it went green.
My question is, how to proceed with the red Process chain and complete the further process and make it green.
Regards
Alex

hi,
There are scenarios where you need to change status of a process chain or a particular step in process chain.
You might need to change the status in the cases where we need mark these steps successful so that dependent steps get processed. There are other scenarios where one needs to change the status of a single step in the process chain or status of whole process chain.
Step by step instructions on change process chain status
1. Right click on the failed step in the process chain monitor and go to displaying messages
2. Go to u2018Chainu2019 tab and note down variant, instance and start date
3. Go to SE16 and the table RSPCPROCESSLOG and enter variant, instance and start dates from step 2 and note down log_id, type, variant, instance.
4. Go to SE37 transaction and execute the function module RSPC_PROCESS_FINISH and enter the values from step 3 and enter the new status u2018Gu2019 in status field and execute the FM
5. This sets the status of the process chain (PC)
After you set the status using the FM, go to the monitor screen of the process chain, you will notice the changed status. Now dependent steps in the process chain will start running
Thanks

Process chains get an error when run analysis process

When my PRD system‘s process chains run analysisi process, I gets below error message:
Error occurred when starting the parser: Error when opening an RFC connection (FUNCTION: 'R
Message no. BRAINOLAPAPI011
Diagnosis
Failed to start the MDX parser.
System Response
Error when opening an RFC connection (FUNCTION: 'R
Procedure
Check the Sys Log in Transaction SM21 and test the TCP-IP connection MDX_PARSER in Transaction SM59.
It's OK when i test the TCP-IP connection MDX_PARSER in Transaction SM59.
The Sys Log in Transaction SM21(error part):
M Wed Mar 19 09:22:50 2014
M *** ERROR => ThPOpen: ExecPopen("/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18933904 IDX=35, r, ..) returned -14 [thxxexec.c
M {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=5328109B5F5D12A0E1008000C0A8642F}_5
A RFC 1878 CONVID 18933904
A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 RfcExecProgramKernel RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
A RFC> ABAP Programm: SAPLSTPA (Transaction: )
A RFC> User: JY-LKZ (Client: 900)
A RFC> Destination: CALLTP_AIX (handle: 8, DtConId: 530F4E5C30AF4550E1008000C0A8642E, DtConCnt: 0, ConvId: ,)
A RFC SERVER> RFC Server Session (handle: 1, 68443927, {5328109B-5F5D-12A0-E100-8000C0A8642F})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: STMS (Caller Program: SAPLTMSC)
A RFC SERVER> Called function module: TMS_CI_START_SERVICE
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1887
FUNCTION: 'RfcExecProgramKernel'
RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
PROG ="/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18933904 IDX=35
[abrfcio.c    9213]
A {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=5328109B5F5D12A0E1008000C0A8642F}_5
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
M
M Wed Mar 19 09:23:15 2014
M *** ERROR => ThPOpen: ExecPopen("/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18968493 IDX=61, r, ..) returned -14 [thxxexec.c
M {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=532811958F750F10E1008000C0A8642F}_1
A RFC 1878 CONVID 18968493
A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 RfcExecProgramKernel RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
A RFC> ABAP Programm: SAPLSTPA (Transaction: )
A RFC> User: TMSADM (Client: 000)
A RFC> Destination: CALLTP_AIX (handle: 3, DtConId: 530F4E7830AF4550E1008000C0A8642E, DtConCnt: 0, ConvId: ,)
A RFC SERVER> RFC Server Session (handle: 1, 70212851, {53281195-8F75-0F10-E100-8000C0A8642F})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: STMS (Caller Program: SAPLTMSC)
A RFC SERVER> Called function module: TMS_CI_START_SERVICE
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1887
FUNCTION: 'RfcExecProgramKernel'
RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
PROG ="/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18968493 IDX=61
[abrfcio.c    9213]
A {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=532811958F750F10E1008000C0A8642F}_1
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE.
ps.
1、IT's everything ok in the development system.
2、It’s ok when i repeat this analysis process .
3、It’s ok when i run this analysis process in analysis process designer.
4、Attachment is the sys log in sm21.
Thanks everyone.

Hi Vignesh.B,
Yes,it's not user's problem . But i don't think it APD's problem .Cause all APD has the same problem and .
Below is one of APD souce and target :
Hope this information is useful .
Regards,
Lian

Process chain - ODS Activation error

Hello All,
I have a process chain which has the following data load sequences:
Load data to ODS
Activate ODS
Load data to ODS2
Activate data ODS2
Load data to ODS3
Activate ODS3.
Used the Program to RSPC_SYNCHRONOUS_RUN to schedule the process chain in Background.
When the process chain is executed in background it loads the data to ODS1 and Activation process is not happening. It registers short dump like shown below at the end. But when i execute the same process chain in RSPC, Schedule option with Start variant set to immediate, it is activating the ODS Data and completes the process chain Succesfully.
Help me to solve this problem.
ABAP Short dump information:
Invalid interruption of a database selection.
t happened?
Error in ABAP application program.
The current ABAP program "GP4BRKGANFKJY5K2A3ACVGAPTN4" had to be terminated
because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Unable to perform database selection fully.
record.
t can you do?
If the error occurs in debugging mode, you should first run the process
without debugging activated.
If the error persists outside debugging, you must check the application
program more closely.
No error requiring recovery has occurred.
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletiondate.
is especially useful if you want to keep a particular message
Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
     neither
    caught nor passed along using a RAISING clause, in the procedure "ACTIVATE_ODS"
     "(FORM)"
    Since the caller of the procedure could not have expected this exception
     to occur, the running program was terminated.
    The reason for the exception is:
    One of the database selections included a database commit.
    The selection was then supposed to continue. Before a
    database commit, however, all outstanding database selections must be
    concluded.
    Possible causes in the application program:
    Within a loop (SELECT/LOOP/EXEC SQL), one of the following
    statements is used:
    - MESSAGE (apart from MESSAGE S...)
    - COMMIT WORK
    - ROLLBACK WORK
    - CALL SCREEN
    - CALL DIALOG
    - CALL TRANSACTION
    - SUBMIT
    - BREAK-POINT
    - WAIT
    In debugging mode, a program sometimes triggers
    a "COMMIT WORK" during the database selection. As a result
    this termination may also occur in debugging mode with a correct
    program.
A "COMMIT WORK" during debugging may be due to the following reasons:
1. A program or screen was regenerated
    and updated in the database.
2. Each user needs a private process in debugging mode, but
    the number of available processes is restricted. If this
    limit is exceeded, each debugging step then requires a
    "COMMIT WORK".
The error occurred in a statement that accesses the table "/BIC/AZXOQMATR40 ".
Thanks in Advance.
Points will be assigned.
Regards
M.A

Hi,
If it is a daily process chain u define it on a periodic basis in the variant and it'll run successfully.
I guess the DUMP may be due to less processes at the time u run...It is gving the same in the dump also..
So when u run the chain immediate in the BKGD the ODS will be automatically getting the required processes dailog and bkgd to run according to ur settings and it was successful..
U try to execute the chain using FM: RSPC_API_CHAIN_START and give the tecnical name of the chain under I_CHAIN filed and conitinue...It'll scedule the chain in the BKGD only and if it is a periodic one the chain will be automatically ready for the next run also...
rgds,

Error while processing XML ; ORA-19202: Error occurred in XML processing

We have an application, which sends an XML to DB for processing.
While it works in general, it is failing, when special characters are present in the text node
see example below
<?xml version="1.0" encoding="UTF-8"?>
<Query>
<Group>
<Value> %</Value>
</Group>
</Query>
Db throws following error while parsing this xml
XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00217: invalid character 15573180 (U+EDA0BC)
How to fix it?

The following works for me on 11.2.0.2, db charset AL32UTF8 :
test_sample.xml, encoding UTF-8 :
<?xml version="1.0" encoding="UTF-8"?>
<Query>
<Group>
<Value>?%</Value>
</Group>
</Query>NB : the characters behind the "?" got lost after posting, they're actually 0xF09F 8C82
Loading...
SQL> truncate table tmp_xml;
Table truncated
SQL>
SQL> insert into tmp_xml values (
2   xmltype(
3     bfilename('TEST_DIR','test_special.xml')
4   , nls_charset_id('AL32UTF8')
5   )
6 );
1 row inserted
SQL> set long 500
SQL> select * from tmp_xml;
SYS_NC_ROWINFO$
<?xml version="1.0" encoding="UTF-8"?>
<Query>
<Group>
    <Value>í ¼í¼‚%</Value>
</Group>
</Query>
Edited by: odie_63 on 25 sept. 2012 23:00

Process chain failing with error 8 in BI 7.0

Hi ,
we have upgrade the dev to BI 7.0 and I am trying to execute the process chains but it is failing with a error 8 due to the step of the job BI_PROCESS is in the name of a old user. So i have changed in process chain -Attrbutes--Execution user --- current user.So the chain has started but it has so many chains inside the Meta chain it looks i need to go to each of them and change as cyurrent user.
But is there some place where I can change globally to a Batch user/current user for these process chain in BI 7.0.If so pl let me know.

Hi,
user SM37 to identify all BI_PROCESS jobs and change the User of the step in the jobs (they all should only have one step).
bye
Frank

Transporting Process Chains-includes the ERROR DTPs in the Target System

Hello Gurus,
Iam facing an issue in version NW2004s while transporting the Process Chains from DEV to QA. The Process Chains in the Target system are including the ERROR Dtps as parallel loads along with the regular DTP.This happens when there exists an ERROR DTP in the Target system at the time of Transport.
This will cause a problem
1.these would run parallel to the regular DTPs.
2.no of back ground processes running at any point will be beyond our limit.
Let me know if you have faced the same issue and how you resolved it.
Thanks
Jagadish

Hi DPN,
Check oout this thread. This might solve yuor problem.
Errors in Transportation
Thanks and Regards
Subray Hegde

Process chain failures and errors therein

Hi all,
Can anyone please guide me as to why the process chain fails?
what are the <b>various kind of errors</b> most often encountered? and how we can recifty them.....???
Your kind suggestions are thankfully acknowledged,
thanks and regards,
shalini.

Hi Shalini,
Process Chain fails due to several reasons. if you come up with any questions our masters will guide you.
Process Chain fails mainly due to data problem.
Regards,
Nagesh.

Process Chain Terminates without errors

Hi Experts,
I'm facing a strange situation; my process chain terminates half way though. Loops are not completed till the end. e.g. it runs the Info Package and DTP then stop there, in some loops only the Info Package is run.
There are no error messages.
i can go to each process and update the targets manually. All are successful no errors.
Does anyone have a clue as to why it will stop half way?
Thanks
FAzal

Hi,
Can you please tell whether this chanin has trabsported.
In the RSPC in the process chain tab there is a option called reset to active version other wise activate the chain and try to start.
hope this helps.
Cheers,
Vikram

Process chain status RED even though successful

Hi Gurus,
Process of my procss chain show status as RED though it is successful and it does not stop the further processes. in the end whole chain is run successfully & this process showing red.
What could be the reason.
regards
Vikash

which process is failed data loading or activation job? is this chain automatically executed or some one scheduled manually? in general when a process failed and we ran it manually and you donot get a repeate option then we can trigger the remaining processes of this process chain using a funtion module in SE38, seems your remaining chain ran in the same way, after this also your process chain overall status will be in Red, if it is data load then you can force it to Green ( you ran it manually), so that your chain over all status will become Green.

Process Chain Transport import error

Hi
I created a Process chain with Start variant "Start Using Meta Chain or API" and collected all the objects of process chain in a transport request
The Transport import failed with RC 8 error
Error Log:
Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RSPC (Delete Mode)
0 Chains Were Selected
Specifying process chain ID 'XXX, type V2&', and variant '' has resulted in the selection of 0 process chains. The selection has been called without confirmation by the user. This means that the user was unable to make a selection.
Please update me what is the reason of error and how to resolve this
Thanks

It sounds to me like process chain (PC) that's starts up PC that you trying to transport is not present in target system yet ?
Might be that there is a link between them...

Process chain failed with Error-Status Change of Process ABAP ZL321NIMIMUUT

Hi,
process chain got failed with Error --**Status Change of Process ABAP ZL321NIMIMUUT
Save Status and Trigger Events if Appropriate**

Hi Neha,
When we do the repeat after right click then we are getting this messege"--**Status Change of Process ABAP ZL321NIMIMUUT
Save Status and Trigger Events if Appropriate**"
I have come to know that there is one ABAP programe when we go to manage varient.
ABAP Programme"ZBWR_ZMYYNNINOH_CSV_CHANGE"

Process chains in red(errors occurred), monitoring in green

Similar Messages

Maybe you are looking for