Process Chains is not running

Hi All,
I have created the Process Chains and Scheduled the Process chain on early morning 2.00AM. In STart variant, i have specified the time and date and saved the Process Chains. I have checked the Scheduled job in SM37 and found,BI_PROCESS_TRIGGER is scheduled. Today i have checked the Log view and found Chain has not executed.
Can u pls help on this issue.
Thanks,
Jelina.

Hi Jelina,
In the scheduling options,check whethre you have selected direct scheduling or with meta chain. Make the desired one and also if you want it to repeat periodically, then Check the Periodic job checkbox and select the periodic vaules from the Period Values Tab.
Hope this helps...

Similar Messages

  • Process chains are not running in a given time.

    Hi BI Experts, Good afternoon.
      Daily we are running the process chains in the night time. And the  first process chain starts at 22:30(master data loading).
      But from 5 days onwards, our process chains are running in the morning time around 10AM.
      We informed to our BASIS team but they could not do anything.
      What may be the problem.
      Can anyone tell me the solution?
    Thanks in advance
      Anjali

    May be your chain was in the wait at the scheduled time, as there were no adequate processes available at the app server to take up your job.
    Check with your Basis ( and also your users ); about the optimal time to schedule the job and reschedule your jobs.
    Ravi Thothadri

  • HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING IN THE PRODUCTION?

    HI ALL,
    CAN ANYONE TELL ME HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING DAILY AT 5.00 PM. I NEED TO STOP THE PROCESS CHAIN FOR COUPLE OF DAYS AND THEN RESTART IT AGAIN.
    cAN ANYONE TELL ME THE PROCEDURE TO STOP THE ENTIRE PROCESS CHAIN RUNNING IN THE PRODUCTION.
    THANKS
    HARITHA

    Hi,
    First and foremost let me advice you to be very careful while doing this.
    For Rescheduling
    RSPC> chain > Goto > Planning view and
    click on Execution tab > select > Remove from Schedule and then in Maintain variant of start process reschedule for the day you require it to run.
    For terminating active chain
    You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
    The next step will be to go to targets that you were loading and remove the red requests from those targets.
    Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
    But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
    Re: Kill a Job
    Re: Killing a process chain.
    Regards,
    JituK

  • How to Notify if Process Chain DOES NOT complete?

    How do I use Process Chains to notify me if the end process of a chain DOES NOT run by a certain time? Example: Chain starts at 6PM every night, always finishes by 7:30. If it doesn't complete by 8:00, I want to be notified. I can spawn an event on completion of the chain, but the 8PM job has to notify me ONLY IF this event is not active. How to do that?

    Well you can make the ABAP process type send message
    RSPC>from main menu Settings>Maintain process types
    change mode -->select process type "ABAP" and change "possible events" to "Process ends successful or Incorrect" save it.
    come out of process chain and goto the process chain maintenance again.
    In regards to your question of 18 steps ,as i said you only need this ABAP process type once at the END of the Process chain to SET the flag status = X.
    Another Process chain runs at 8.00 with only one process type ABAP process type to check the status in table if empty or X and send message accordingly,
    Fyip - table  RSPROCESSLOG and FM - RSPC_PROCESS_FINISH also available at your disposal to get some leads.
    You can wait until some one has better solution and implemented it before,i just put my thoughts in to it,its not imperative for you.
    I leave the thoughts with you.
    Hope it Helps
    Chetan
    @CP..

  • Process chain is not activating

    Hi ,
    I am trying to schedule process chain, but giving error message like below.
    Job BI_PROCESS_TRIGGER Could not be activated (return code 8).
    Can you please tell me what it means and how can i activate it.
    Regards
    Rajini

    Follow the steps given in OSS NOTE 947690.
    Summary
    Symptom
    The activation or scheduling of the chain fails with the return code 8. You get the message "The job xxxxxx could not be scheduled"(or activated).
    Other terms
    Return code 8,rsm702,rspc065.
    Reason and Prerequisites
    1. The user type of background user is incorrect.
    2. Invalid host name setting.
    3. Server name spelt wrong or wrong case-sensitivity for server name in sm51.
    4. Process chain scheduled to run on a server which does not exist.
    5. No instance is defined but the operation mode is set in sm63..
    Solution
    1. Set the background user profile according to note 511475.
    2. Check the host name setting in sm65 and correct if necessary (refer note 23538).
    3. Check the server settings in sm51 i.e., check for the spelling and correct case.
    4. Schedule the chain with a valid server.
    5. Maintain an instance of operation mode in rz04
    You can try executing RSPC_EXECUTE_USER program. This switches between the scheduling by the current user and the scheduling by the BW background user (Note 640746)

  • Process chain shows DTP running

    We are on latest patch levels in BI 7.0.
    One of our production process chain is not completing. It shows no messages, DTP from  DSO to cube remains yellow. We don't see any request updating in the cube. However, manual execution of DTP is working fine.
    I have dependent process chains, and I need to make this process chain green.
    Please help
    Shalini.

    Hi Shalini,
    Some patch is missed in production system i guess.
    Could you please cancel the DTP that is currently running in the
    System and restart it again. Before restarting the DTP please make
    sure that the lock from the DDFTX and NRIV tables have been released.
    Please ask the database administrator to ensure that there are no
    locks on the database on these tables before starting the DTP again.
    The issue with the lock on the DDFTX table usually happens when an
    upgrade is done and on restarting it the issue should not occur again.
    Could you please implement note 1155807. This note should prevent the
    locking on the DDFTX table
    Hope it helps you.
    Thanks,
    Sarau

  • How to stop a process chain when its running?

    Dear Experts,
    How to stop a process chain when its running? is it that a chain can be stoppend when we open an info package of that chain ?
    Thank you,
    Raj

    Hi,
    Goto the main menu process chain --> choose the remove from the Schudule...
    Regards
    sathis
    I hope it helps to u... please assign the points

  • Infopackage in process chain is not scheduling

    Hi All
    One of infopackage in process chain is not scheduling and showing error message like "<b>Attributes are not yet maintained
    Entire chain now has status 'R'</b>     
    what do we mean about this
    can anyone will let me know in detail and how to correct this?
    Regards
    balaji

    Hi balaji,
    how big is your process chain ? I got a similar problem when I build a metachain with a lot of processes in the chain (more than 60). In this case, the error message is deceiving. If your process chain has similar numbers of processes, check OSS 942804 (Jobcount handling).
    Kind regards,
    Jürgen

  • [solved] To display Processes which are not running from constant process

    i have constant processes prostat1,prostat2,prostat3,prosta4,prostat6,prostat8,prostat9 (6 processes) runs to support the application
    Now my problem is
    i want to display the process which is not running (from the above 6 processes)
    Thanks in advance

    Try this
    echo "Constant processes not running"
    echo
    for PROC in prostat1 prostat2 prostat3 prostat4 prostat6 prostat8 prostat9
    do
            if [ ! "`ps -ef | grep $PROC | grep -v grep`" ]; then
                    echo $PROC
            fi
    doneBTW, those are 7....:-)

  • Process Chain : 0PM_INIT_P01 - Not Shown in RSPC

    Dear Friends
    I have installed 0PM_INIT_P01 (Initialisation:MTTR / MTBR) Process chain.
    It installed successfully.
    But i could not able to see in RSPC.
    Can anybody tell me why it is...?
    Some where i found authorization object  S_RS_PC is needed for my user id. Is it so...?
    Than how i can map to my user id...?
    Points will be awarded for right answers
    Regards
    Raju Saravanan

    Friends
    Problem is, the installed process chain is not getting displayed in RSPC for further operations.
    Before that, I have installed the Process Chain through business content (0PM_INIT_P01), and it got successfully installed. I had seen in SM37.
    For testing purpose i have given the same name (0PM_INIT_P01) for another chain creation.
    But system telling the name is already available.
    My confusion, why it is not getting displayed in anywhere in RSPC.
    Regards
    Raju Saravanan

  • Process chain is not getting scheduled

    Hi all ,
    Process chain is not getting shceduled , i have saved , checked and wanted to activate but its going to a loop and its not getting activated . please suggest some solution
    Regards
    Akhilesh

    Hi Akhilesh,
    Can you check that your user has the necessary authorizations to schedule a job? Can you also check if there
    is an error message generated in sm21 or dump in st22? You say as well that the scheduling is looping, in sm50 what
    table/statement is the process looping over?  Can you also let us know your BW release and support package level.
    Best Regards,
    Des

  • Process chain is not triggering through event after BW Upgrade

    Many of our process chains are event based.
    After BW upgrade 7.0  to BW 7.31 we tried to trigger the event through  SM64 Tcode. But the process chains are not getting triggered.
    Could anyone please guide me what might be the issue.

    Hi Bharan,
    Can you please check once the start variant of process chain which are based on event.I think it should trigger after event is triggred.
    Regards,
    Ganesh Bothe

  • Chain Process execute does not runs...

    Hi all,
    One day ago had a problem with an ODS load and tried to resolve with tihs post  Error while activating data in DSO
    It was not possible (maybe I try to reloaded fully)  to solve it,  but now the problem is that process chains (alls) is not runnig after plannification (immediate or programmed)!
    I see the jobs WAIT but not executed...
    thanks!

    Thanks! With SM66  I see one error:
    Servidor       Número Tipo PID      Status Espera Semáf. Iniciar Error CPU Tiempo Usuario Report   Acción Tabla
    dbciPBW_PBW_44 25     BTC     12295 hält   CPIC          ja       1        285314 ADMIN   CL_SLD_A
    and with de Sm55, also 1 error:
    BTC     12295     esperan     RFC     Sí     1               285468     CL_SLD_ACCESSOR===============CP     100     ADMIN
    I'm not sure what to do?

  • Data Manager Packeage and Process chain si not working

    Hi All,
    I executed a data manager package which contain a process chain to revaluate the one of my Account dimension meneber Say  "Revenue". I am working on BPC NW 7.0
    steps I followed:
    1. I created a script logic file and created a custom process chain.
        process chain steps:
      a) Start variant
      b) Modify dynamically
      c) Run Logic
      d) Or and Clear BPC tables
    2. This process chain was included in data manager package.
    3. Data manager package was modyfied to include parameters and scipt logic file name.
    4. executed data package
    The issue is " when I execute Data manager Package" I dont get any error but when I View status I dont see any pachage running or completed. If I see Process chain, It is failing at first step of Modify dynamically..no clue?
    Could you please let me know what could be a issue?
    Cheers,
    SAC

    I encounter this problem, Do this Steps:
    I. First,check if your process chain is existing in the Library.
    II.If yes,follow the steps below:
    1. Edata - organize Package - Modify your Package.
    2.Check if you had the correct process chain.
    3.IF yes, Click View package at its right side.
    4.Expand the Task Folder and take note of the Task Name (e.g. ZBPC_PROT_RUN_LOGIC)
    5.click Advance,Compare the task name that you noted in the syntax TASKS
    (e.g. TASK(ZBPC_PROT_CF_RUN_LOGIC,SUSER,%USER%)
    6. It should be the same.
    Running package but not appearing any status happens when the system cannot find your process chain.
    hope this helps,

  • Process chain is long running

    We have a process chain that is long running even though there is not much data.
    It is long running in Load PSA step. It is getting data from other R/3 sap system. A job is also long running in the R/3 system.
    We can see data coming to BW system but not getting updated to PSA and even the job in R\3 is also not getting terminated.
    There are many other process chains too running in the system and they are running fine. So i feel that this may not be due to system performance. This is happening for last one and half week.
    If any one has faced similar problems or if you have any solution or checks that i can do, please reply.
    Regards,

    Hi sarafraz,
    If there are more than one run are active and running ,then delete the other extraction job and have only one at a time in source system. Because those may be causing lock issue .
    Also see system log in SM21 ,if you have any system termination message for this extractor .
    Check ST22,if you have any short dump for this extractor
    Also you can try to load for particular selection in Infopackage (for a month,company code or some other selection that restrict the data) and check whether it is completed or not.
    Also check to RSA3 and extract there.
    See SM12 -for lock entires
    SM51,SM66 in source system - What is running for this extractor,which program is being read,which table etc...
    so you can know the step where it got stuck or taking long time.
    Thanks,
    Naween

Maybe you are looking for