Process chains not pulling any data?

I have created process chain and also shceduled it I am not even seeing the in monitor the requests.But in SM 37 all of them shceduled and also completed.

Hi Vasu,
I doubt that u have used a wrong schedule time..
Just check going into the infopackage and then goto Monitor..and check if u can see any entry in the monitor... If not.. then proceed as below..
So try with an immediate run and then check is that works fine for u...!!!
Do let us know the details..
Thanks
Hope thishelps

Similar Messages

0fi_gl_4 init is not pulling any data

Hi All,
We have ofi_gl_4 installed and running fine with deltas. We thought of reinitializing the delta because of some business reasons. I deleted the delta initialization and started delta initialization with data transfer with Fiscal Year/Period selection. It is not pulling any records and it is saying there is no new delta since last extraction. I'm sure there is data as this extractor pulled the data so far for this period.
Then I thought of testing this using RSA3. Even RSA3 is not pulling any data. But there is data in BKPF/BSEG for this periods.
The extractor is putting the correct time stamps in BWOM2_TIMEST and all other entries in tables like TPS31, BWOM_SETTINGS are all okay.
Did any body faced this problem? Is there any change in the FI extractors recently?
Your help is greatly appreciated.
Thanks,
Trinadha

Hello Trinadha,
You may want to have a look at OSS note 640633. Following is the text from note.
Hope it helps.
Regards,
Praveen
Symptom
Deleting the Init 0FI_GL_4 deletes all BWFI_AEDAT data
Other terms
0fi_gl_4, 0fi_ar_4, 0fi_ap_4, 0fi_tx_4, BWFI_AEDAT, BWFI
Reason and Prerequisites
The system was intentionally programmed like this.
Solution
The error is corrected in the standard system with PI 2004.1.
The reset logic is changed with this note so that during the reset, the DataSources 0FI_4 only delete their own entries in the initial selection table (ROOSPRMSF) and in the time stamp table (BWOM2TIMEST). The data of the table BWFI_AEDAT is, however, only deleted if no more 0FI__4 DataSources are active.
Proceed as follows for the advance correction:
1. Install the code in function module BWFIT_RESET_TIMESTAMPS or include LBWFITTOP.
2. Create an executable program ZFCORR_BW_02 with transaction /NSE38.
Program title:        Change 0FI_*_4 DataSources.
Selection texts:      Name Text
                       OBJVERS Version
                        OLTPSOUR DataSource
Implement the source code of program ZFCORR_BW_02.
Execute the program for the DataSources 0FI_AR_4, 0FI_AP_4 and 0FI_TX_4. The program uses the BWFIT_RESET_TIMESTAMPS function module as a reset module for these DataSources.

Delta Load is not pulling any data....Need to Run Full Repair EVERYTIME ? ?

Dear Experts,
Today again I need your help gurus.
The Delta load is running everyday but its not getting any data to BW form CRM. But when the User raises an issue regarding the data , I pull the data by Repair Full load by some Selection ( Same selection of Delta + Transaction No ).
The selection(For Full Repair Load ) is only the Transaction No and the Sales Organization.
The selection for the normal Delta is Sales Organization ( 0CRM_SALORG ) 50000609.
But I am confused about the issue.
Kindly put some light on this issueu2026
Thanks,
Sanjana

Hi Sanjana:
Have you applied any SAP Note to fix this problem? Please check if the SAP Note below helps you in solving this issue.
Note 788172 - "CRM BW adapter: No data in delta with parallel processing"
Regards,
Francisco Milán.

Report is not pulling the data from multiprovider in BI 7.0

Hi BW gurus,
We have upgraded our BW systems from 3.5 to BI 7.0.
According to our requirement we did some modifications(added some new cubes) to existing multiprovider. All the objects and assignments looks good in the multiprovider.
We are facing a problem while executing the reports, report is not pulling any data from the particular multiprovider but I can see the data from the multiprovider.
For any selection creteria we are getting the msg like "No applicable data found".
Created a sample query with only two chars and two KF's no conditions, no exceptions still the report is not populating any data for any selection creteria.
Appreaciate for your help in this regard.
-BK

Hi
Deactivate the aggregates and then rebuild the indexes and then activate the aggregates again.
GTR

B2B adapter is not polling any data from EDI X12 810 ECS file

Hi All,
I am new to Oracle B2B. I am using
Jdev 11.1.1.6
Oracle Editor : 7.0.5.4016
Document Protocol : EDI_X12
Document type : 810 (Invoice )
Version: 4010
Weblogic server :11.1.1.6.0
Requirement is : i had an EDI file and i need to translate the EDI map using the B2B adapter, transport to SOA Suite and insert into a custom DB.
Issue is : B2B adapter is not polling any data from EDI X12 810 ECS file
for this i created sample EDI X12 810 ecs file, i converted the same to .xsd and .dat file. I created partner, and while configuring channel i used '*Generic File 1.0*' protocol and i given folder path( i also checked, by just giving folder Name) in the folder name property of 'Transport Protocol Parameters' , i also placed sample xml file into this folder. And I created sample process in Jdev to poll data from this folder.
build and deployment is fine for this process, but no instances is created for this process. and the Process is not Polling any data from the folder which i mentioned in the Transport Protocol Parameters.
is this the way am doing is wrong for my current requirement or am i did any wrong step (as stated above ) ? Please help me. How can i receive data from this EDI file to my bpel process so that i can continue with the rest of the Process. Thank you in advance
Edited by: 979032 on Feb 12, 2013 11:02 PM
Edited by: 979032 on Feb 13, 2013 12:14 AM

Hi Anuj ,
I placed .dat file now. The file Picked by B2B adapter. But i was getting the Error. The error i found in Business Message as
"Error Code     B2B-50547
Error Description     Machine Info: (soabpm-vm) Description: Agreement not found for trading partners: FromTP null, ToTP MyCompany with document type 810-3070-INBOUND.
Error Level     ERROR_LEVEL_COLLABORATION
Error Severity     ERROR
Error Text     Agreement not found for trading partners: FromTP null, ToTP MyCompany with document type 810-3070-INBOUND. "
But i created agreement for the partner and my document type name is "NewDocumentType" and in the wire message a am getting as shown below
Id     7F00000113CFC36785C0000017D7E2B0
Message Id     7F00000113CFC36785C0000017D7E2B0
Business Message     7F00000113CFC367A450000017D7E2B7
Packed Message     Packed Message
Payload     Payload
Protocol Message Id     EDIX12810.dat@7F00000113CFC36799B0000017D7E2B4
Refer To Protocol Message Id
Protocol Collaboration Id
Protocol Transport Binding     filename=EDIX12810.dat filesize=2289 ChannelName=MyCompany_ListeningChannel file_ext=dat fullpath=/home/oracle/Desktop/B2BFiles/EDIX12810.dat timestamp=2013-02-21T01:58:21.000-08:00 MSG_RECEIVED_TIME=Thu Feb 21 02:04:53 PST 2013
Message Digest     Message Digest
Digest Algorithm
Transport Protocol     File
Transport Protocol Version     1.0
Url     file://localhost//home/oracle/Desktop/B2BFiles/
security
Transport Headers     filename=EDIX12810.dat filesize=2289 ChannelName=MyCompany_ListeningChannel file_ext=dat fullpath=/home/oracle/Desktop/B2BFiles/EDIX12810.dat timestamp=2013-02-21T01:58:21.000-08:00 MSG_RECEIVED_TIME=Thu Feb 21 02:04:53 PST 2013
certificates     certificates
State     ERROR
Reattempt Count
Error Code
Error Description
Error Text
exchangeRetryInterval
exchangeRemainingRetry
Message Size     2289
I also has one more doubt, now i created ecs,xsd and .dat by selecting sample EDI file in Document editor. suppose i want create the same ecs ,.xsd and .dat for my gentran file which is of EDI x12 810 standard but i have it in PDF format , then how can i access that to in Document editor ( in the import option, i found Gentran DDF and Gentran Unix IG and i was getting the following error while importing my PDF file
ErrorCode : 0xC00CE508
File Position : 10
Line Number : 2
LineByte Position :2
Reason: An invalid character was found in text content error) so that i can create .dat file and i can place the same in my folder in order to pick the file.
Please help us . Thank you .
Regards,
Kotresh
Edited by: 979032 on Feb 21, 2013 2:17 AM

ReportViewer control used with a remote report does not display any data.

Hi there,
I have this .rdl report that runs just fine on our reporting server (I can see that when I try to run the report by accessing its URL in a browser). However, when I run it in my Windows-based application, I do not see any data. My report has two input parameters
and it needs to impersonate the caller's identity because the database uses Windows Authentication.
Here is the code I use:
var reportViewer = new ReportViewer();
// Set Processing Mode
reportViewer.ProcessingMode = ProcessingMode.Remote;
// Set report server and report path
reportViewer.ServerReport.ReportServerUrl = new Uri("http://MySsrsServer/reportserver");
reportViewer.ServerReport.ReportPath = "/Reports/MyReport";
// set the credentials
reportViewer.ServerReport.ReportServerCredentials.ImpersonationUser = WindowsIdentity.GetCurrent();
// create report parameters and set them in the report
var param1 = new ReportParameter("First_Param", "Some string");
var param2 = new ReportParameter("Second_Param", "Some other string");
reportViewer.ServerReport.SetParameters(new ReportParameter[] { param1, param2 });
using (var reportForm = new ReportForm(reportViewer))
reportForm.ShowDialog();
The ReportForm is just a regular Form that has a member of type ReportViewer. In the class' constructor, I assign the member:
public ReportForm(ReportViewer reportViewer)
InitializeComponent();
try
this.reportViewer = reportViewer;
reportViewer.SetDisplayMode(DisplayMode.PrintLayout);
reportViewer.Dock = DockStyle.Fill;
reportViewer.ZoomMode = ZoomMode.Percent;
reportViewer.ZoomPercent = 100;
reportViewer.RefreshReport();
catch (Exception exception)
MessageBox.Show(exception.Message);
Using database level tracing, we were able to confirm that the two Stored Procedures used by the report are called and they return correct and valid records. However, in the form nothing shows up:
Any suggestions?
TIA,
Ed

Good to know CR doesn't like joins of Stored Procedures to something else.
But in my testcase, I finally dropped the link between the ttx file and the stored procedure. Doing so, I was able to run the report from the designer with the stored procedure as datasource instead of the ttx file. At that moment, I still had missing data in my report, while the resultset of the stored procedure returns me all the correct data !
In the mean time, I changed the layout a bit, especially the text fields containing name, address, country and postal code and city of the customer, by just adding some spaces between those seperate databasefields. In fact, there is one text box with all those database fields concatenated one to the other.
And by just adding some spaces in between, my report works fine again ?!
Strange, strange, strange,....

Error in process chain when running package (data manager)

Hello experts,
I try to run the following how to : "move date between applications using Data Manager ..."
Yon can find the pdf here : http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0480970-894f-2d10-f9a5-d4b1160be203
I'm looking after someone who used it successfully, on my side after implementing all steps and running the package I get the message "IMMEDIATE RUN: Request to run the package on the server was successful The package is now running"
When I look the log for the process chain, overall status of the process chain is yellow, and steps "modify dynamically" and "clear BPC Tables" are in error.
I can't get any usefull error messages.
If someone has an idea to have details about those errors, it will be appreciated.
Points will be awarded, thanks in advance.
Guillaume P.

Hello Experts,
I am also facing the same issue with PC failing at Modify_Dynamically step....
This process type is working fine when used in standard delivered process chain to load transaction data.
I tried using this variant in my cutsom chain, but it fails.
Please suggest.....
Thx....D

ACS Report - User_Usage_Logon - not returing any data and the report never finishes

Hi,
i'm trying to run the User Usage report, but not getting any data output.
i tried to open the report in the report builder to check the query,, but the query is in XML format and i'm not able to figure out the actual query that pulls out the data.
i need help on the below :
1. way to check , if the ACS database , does actually have any data.
2. to pull out the actual query from the XML data.
thanks,
Sameer

Hi,
As we only have one report experienced this timeout issue. Given this situation, we can try the following steps to narrow down the issue:
1.Run the report directly through SSRS report manager URL to test if we still get this issue.
2.If yes, increase the timeout limitation for this single report.
3.As for further investigation, we can enable SSRS verbose logging by referring to the following steps:
Enabling verbose log in Reporting Services Instance :
To enable the verbose logging for the Reporting Services instance you have to follow below steps.
Go to location
C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer\bin
Find the ReportingServicesService.exe.config
file, make a copy first, and then open it in editor and change the below configuration.
<system.diagnostics>
    <switches>
      <add name="DefaultTraceSwitch" value="4" />
    </switches>
  </system.diagnostics>
  <RStrace>
    <add name="FileName" value="ReportServerService_" />
    <add name="FileSizeLimitMb" value="32" />
    <add name="KeepFilesForDays" value="14" />
    <add name="Prefix" value="appdomain, tid, time" />
    <add name="TraceListeners" value="file" />
    <add name="TraceFileMode" value="unique" />
    <add name="HttpTraceFileName" value="ReportServerService_HTTP_" />
    <add name="HttpTraceSwitches" value="date,time, clientip,username,serverip,serverport,host,method,uristem,uriquery,protocolstatus,bytesreceived,timetaken,protocolversion,useragent,cookiereceived,cookiesent,referrer"
/>
    <add name="Components" value="all:4,reportrendering:4,http:4" />
  </RStrace>
You have to restart the Reporting Services from Reporting Services configuration manager.
4.After enable the verbose logging, reproduce this issue again by running the report, record the timestamp when we start the report, when the error popped up.
5.Then check SSRS log files at the following path, in the file which contain the issue time, check if there is any error message.
C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\LogFiles
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected].

Popularity Trends not showing any data

Hi,
we are using SP 2013 RTM version and it is not showing any data in the usage statistics when we run the popularity trends reports. Is this a bug with SP 2013 RTM version? or am i missing something?
Thanks
techie

Hi,
Per my understanding, Popularity Trends report showing no data in your environment.
For narrowing down the issue, I suggest you check whether the two timer jobs “Microsoft SharePoint Foundation Usage Data Import” and “Microsoft SharePoint Foundation Usage Data
Processing” which are handling the usage report runs without issue.
More information about how to deal with this issue for your reference:
http://blog.fpweb.net/troubleshooting-sharepoint-2013-web-analytics/#.VQKMGHkfqwU
http://snowburnt.blogspot.com/2014/12/how-to-troubleshoot-sharepoint-usage.html
http://geekswithblogs.net/bjackett/archive/2013/08/26/powershell-script-to-workaround-no-data-in-sharepoint-2013-usage.aspx
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Table TZC37 field STATU search help drop down is not pulling any values?

Hi,
In table TZC37 field STATU(Contract status) search help is not pulling any values( drop down list when execute the table values) .. but the table has values for this field.
And also I checked in the configuration, this field has values in the config also. But still the search drop down is not getting any values.
Can any one knows what could be the reason and how to solve this issue?
I am using this field in transaction FNVS when searching loan number based on Status field.
Thanks for your time.
Murali.

Hi Micky,
I am using this in transaction FNVS (when searching Loan number based on Status field( this is Custom Search help added this field ( VDARL- SSTATI )
Value table for this data type - STATI is TZC37.
While getting records from these tables(TZC37 or VDARL ) I am trying to use drop down values for searching data using this field SSTATI. But its not showing any drop down values. It supposed to show what ever values exists for this field right?
I checked in the cofig of this table and values exists for this field.
Any help appreciated.
Thanks.

Conversation Vertical not pulling any results from My Sites

My conversation vertical is not pulling any results from My Sites newsfeed posts
('Nothing here matches your search'). It is however pulling discussion list items from team sites. Additionally people vertical works as it should (I can search people and user profile metadata and get the proper results).
I have:
-UPS with search service account as
an administrator with "retrieve people data for search crawlers"
-Content source with sps3://ourportalurl
-Crawl rule specifying My Sites URL
-out of the box Conversation result source
Thank you for any tips.

Hi mmlmiller,
I tried and it could work in my environment.
Please add the web application URL (also make sure your search service account have read permission on this web application via ) which hosts the MySite in Search Service application Content Source, then start a full crawl and
test again.
https://technet.microsoft.com/en-us/library/dn186229.aspx
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

MDX Query not retuern any data on my production server when i check service it is running

Hi All,
MDX Query not return any data on my production server when i check service it is running. when i restart my service i can able to run MDX Query and get data in my production server.

Hi Mnishcal,
According to your description, there is no data returned before restart Analysis Services, right?
We haven't experiencing such issue before. And we cannot reproduce this issue. In your scenario, can you reproduce this issue? Here is a post which explains why you might not see the data you expect when browsing a SQL Server Analysis Services cube that
processed successfully. Please refer to the link below.
http://social.technet.microsoft.com/wiki/contents/articles/19744.ssas-troubleshooting-data-is-not-visible-when-browsing-a-cube.aspx
Besides, are there any error on the log file? The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
Regards,
Charlie Liao
TechNet Community Support

Product Revenue Bookings and Backlog Dashboard does not display any data

Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
They are able to see just the parameters.
Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
What can I check?
Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
Screenshot is at:
https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
Any ideas?

hi
We have faced the similar problem after the upgrade to 10G
What we did was
Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
we were able to get the data once the clear and load is completed successfully
Regards
Ramesh Kumar S

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

If you just installed iCloud does that mean you updated the iOS that's running on your iPad? If so, you'll want to restore all the programs you have from the backup you hopefully made.
Refer to these articles for help.
iTunes: Backing up, updating, and restoring iOS software.
If you don't want to use iCloud, simply don't activate it.
You can also download the programs again.
If you live in a country that supports re-downloading apps then you can re-download them. You can refer to this article for more help.
Downloading past purchases from the App Store and iTunes Store
What to know if your country supports downloading past purchases?
iTunes in the Cloud Availability

BI Publisher Word Template The report does not contain any data fields.

I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
2. Oracle BI Publisher -> Open (I open the report)
3. Go to Insert -> Table Wizard
I get this error:
The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
Please help

Hi
How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
Please clarify
Thanks

Process chains not pulling any data?

Similar Messages

Maybe you are looking for