Process chains start after transporting

Hello friends,
since we've upgraded to NW7 we encounter the problem that process chains start automatically after transporting them from test system to productive system. This ist very unpleasant!
Does anybody encounter this problem too? Ist there a system settig, which disables the automatic start of process chains after transporting?
thnx in advance!

Hi,
Process chains execute when transport request imported  :Note 1233327 - Correction: Scheduling of immediate start for transport
In order to stop Process Chains from being scheduled immediately upon import, insert the following into the RSADMIN table with ABAP program
SAP_RSADMIN_MAINTAIN:
Object = NO_TP_SCHEDULE_IMMEDIATE
Value = X
After this change is made to the RSADMIN table, you can import Process Chain transports where the Start process variant has it set to be scheduled immediately.
This entry can be modified in the future by the same ABAP program and just changing the value of Object to space.
rgds,

Similar Messages

  • Process chain starter

    Dear All,
    We have transported a process chain, however, while trying to change the start condition of the process chain starter, it is not allowing us to change the start condition. How to resolve this issue ?
    Thanks,
    Sam

    Hi,
    Are you trying to change the scheduling of the process chain starter or are you trying to change the starter itself?
    If you are trying to change the scheduling then you can do it and it might ask for Transport request, you can simply save the same in transport for the first time.
    If you are trying to change the start process then you can follow the standard procedure as to bring the changes from D to Q and then to P.
    If the process is enabled for the Objest Changeability in the transport connector then you can be able to change the process chains in the target system as well after storing the same in the transport.
    Hope this helps.
    Murali

  • Error while collecting the process chain in a transport request

    Hi Gurus,
    I am getting an error while collecting my process chain in a tranpsort request.I have to transport the request from DEV to QA system.
    When in RSA1--->transport connection i drag & drop the chain from left to right side pane then the Error occurs.
    1.Object 'REQUDELZPAK_48RZW8GZX87CNEH7S897TFQSD' (RSPV) of type 'Process Variants' is not available in version 'A'
    Sap help given
    You wanted to generate an object with the name 'ZPAK_48RZW8GZX87CNEH7S897TFQSD' (in transport request RSPT) of type 'Process Chain Starter' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
    2.Object 'ZPAK_48RZW8GZX87CNEH7S897TFQSD' (RSPT) of type 'Process Chain Starter' is not available in version 'A'
    Sap help given
    You wanted to generate an object with the name 'REQUDEL   ZPAK_48RZW8GZX87CNEH7S897TFQSD' (in transport request RSPV) of type 'Process Variants' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
    From one of the threads:
    (https://forums.sdn.sap.com/click.jspasearchID=10081153&messageID=4623856)
    i though it was the problem of patch level sap note(966131).
    Accordingly i tried collecting process chain in the request where the patch level is high(24).But same error is seen.
    I have activated chain again & then tried collecting the request i the process chain.But did not solve the error.
    I have to collect Process chain in a transport request.Can you help me out to solve the problem?
    Thanks in advance!
    Regards,
    Pallavi

    Hi,
    take a look:
    Data Warehousing
    "Errors occurred during post-handling RS_AFTER_IMPORT for MPRO L "
    Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
    Try to set the Process Chain Start to Immediate(background jobs) in the schedule, because this will trigger the process chain once tranported and may cause similar errors.
    Regards
    Andreas

  • Trigger a process chain(PC) after successfull completion of two other PCs

    Hi All,
    My requirement is to trigger a Process Chain only after successfull completion of two other process chain which are already scheduled to run at different times.
    Please tell me how to achieve this into SAP-BW 3.5
    Thanks
    Jharna

    Hi
    It is very simple, I'm doing the same.
    Insert Remote Process Chain at the end of the actual process chain and call the other process chain, here you need to give source , destination and process chain name in Remote process chain.
    try it, it will work.
    Thanks
    Reddy

  • How to know the process chain start time & end time?

    HI all .
    how to know the process chain start time & end time at the table level as well as in RSPC level .
    regards,
    Srinivas

    Hello,
    there is a program "/ssa/bwt" which will help you to know the exact time when the process was started and ended.
    but the thing is you have to provide name of the process chain with the date at which it was executed.
    another option is - you can double click on start process and on the last process of the chain.
    here, you will get both the timings... Start time of the start process will be the start time of your PC and end time of the last process in the chain will be end time of your PC.
    Hope this will help you.

  • How to know the process chain start time and end time

    Hi Experts,
                   How to know the process chain start time  and end time .
    Thanks in advance
    Regards
    Gutti
    Edited by: guttireddy on Feb 23, 2012 11:30 PM

    Hi Reddy,
    You may find the run time of a PC using below steps.
    1. Call SE38 > /SSA/BWT > Execute  > Enter your PC , choose the date and time > Execute. Here Run-time of a PC is displayed. (or)
    2. Call RSPC1 > Enter your PC > Execute > Goto Log view > Right click on the start Variant > Displaying Messages > Note down the start time in Chain Tab. Now Right click on the last Process type of the PC > Displaying Messages > Note down the End time in Chain Tab. The Difference b/w start time and end time gives the Run-time of your PC.
    Hope this helps.
    Regards
    Sai

  • Trigger Tcode in ECC as soon as process chain starts in BW

    Hi Experts,
    I need some help on how to trigger a transaction code in ECC as soon as the process chain starts in BW.
    I need to give some selections in the ECC like company code, period and year to fetch the report in ECC . I use it for reconciliation of data between ECC and BW.
    Pointers if any would be really helpful.
    A step  by step guide, presentation,doc would be really appreciated.
    Thanks

    Thanks for the reply ravi but what i am looking for just opposite of whats explained in the link.
    I am looking for the info on how  to execute/trigger a transaction code in ECC as soon as the process chain starts in BW ie BW to ECC
    the doc explains how to trigger a process chain in bw from ECC.
    Thanks

  • Start BW process chain automatically after FPBW or FPCIBW is finished

    Dear SAP Experts,
    we would lilke to setup our process chains in BW, so they start automatically, after FI-CA mass activities (PFBW or FPCIBW) are finished in source system IS-U.
    In fact, I know the process behind this, according to SAP note 135637, so
    (1) Create an event in the BW system
    (2) Create a function module in the BW system
    (3) Create an ABAP/4 report in the R/3 System
    As we have more process chains in BW, one for FI-CA open items, second for closed items, another one for sales statistics, I suppose there are different events in source system for every type of job as well, so when FPBW is finished, FPCIBW, when sales statistics processing is finished in source system etc..
    My question is, which event is triggered after the job in IS-U (FPBW, FPCIBW) is finished?
    Btw, I found implementation of function module FKJO_EVENT_1905, where I_ID LIKE  DFK_JC_CNTR-ID was checked, but I don't know if this is for all jobs in source system, or only specific jobs..
    Thanks and regards,
    Peter

    Hi, Carlo!
    We were encountered the same problem in our project in the end of April. We wrote message to SAP, and still waiting when our customer provide access to supprot team for SAP system.

  • How to send a email as soon as the process chain starts

    hi,
    i feel i am doing the right thing . but i couldn't get the mail.
    i have created the process chain.
    and attached the message to the start of the chain.
    i had inserted the subject to the message and the recepient id is attached to the addresse.
    any thing else to be done.
    every thing is connected.no need to do the settings as we were getting mails for the other chains.
    please do reply in detail.
    regards,
    soumya

    Ensure proper settings done in SCOT.also see after going in SCOT -->CLICK on JOB then see whether any job is scheduled to run to send mails or not ?if yes after what time period it runs.see this.
    else check this link
    Creating messages in Process chains

  • How can I realize a period process chain start: the 1st to 3rd day every?

    Hi,All
    I want to set a start in a process chain as the following:
    a period value: the 1st to 3rd day every month
    How can I realize it ? Thanks.
    Best Regards
    Jiande Ding

    Hi Jiande Ding 
    create original chain as a Meta chain.
    create the another process chain with immedaite in start varaint..
    and put abap step in that PC after process chain..
    put this below code in that abap program.
    DATA: wwdate like sy-datum,
              WWDAY(2).
    wwday = sy-datum+6(2).
    IF WWDAY EQ '01' OR WWDAY EQ '03'.
       CALL FUNCTION 'RSPC_API_CHAIN_START'
      EXPORTING
        I_CHAIN             = <ur meta chain tech.name>
    ENDIF.
    Edited by: shanthi bhaskar on May 5, 2009 4:44 PM

  • Process Chain starter in Production

    I transported a process chain in to Prod but when I click on the start process, it doesnt show me anything. Everything else looks perfect. What is the problem?

    Hi Fran,
    Some time variants are not collected automatically in a request you have to manually collect them .
    Hope this will help you
    Suneel

  • Process Chain - Start Variant

    Hi Guys.
      I have a process chain and a start variant, but then when I transported. It seems not be transported the variant. CAn you please help me with this?
    Regards,
    Iván.

    check in forum, you will find lot of threads...
    1. Goto RSA1 --> Transport Connection.
    2. select objects by Object Types.
    3. You can see "Process Chain"
    4. double click on it. inthat select your process chain. go with transfer selection.
    5. Your process chain will transferred to right hand side. check the Grouping options on the right side tool bar. go with "Necessary Objects" under Grouping.
    6. you can see all the list od variants in that. go with transport icon on right side tool bar. you need to make sure all process variants collected in this.
    Nagesh Ganisetti.

  • Process chain start variant repaired in production

    Hi
    I took up tasks from our previous Bi team
    I am told we have followed the regular process of DEV --  QA and PROD for all  process  chains
    I see a strange observation in Production for a particular process chain in its start variant
    It is shown to run as immediate in the start variant, in the detail view , but
    it runs scheduled at a certain time every day, I can see the scheduled jobs released
    I see that in production it is attached to a request in repaired status
    process chain works fine and triggers regularly
    I am unable to understand why it shows as immediate in the start variant and however runs on a regular schedule

    Hi
    1) why does the start variant of this META chain show up as immediate, when it is actually running scheduled ?
    are you able to see the chain in green color(scheduled state).
    when you right click on start process chain step and you have option to select display scheduled job?..if yes check the start condition by double click on job.
    2)Does the change directly in production, could have brought in this behavior?
    We can change the start condition of process chain, when right click on start variant and select display variant..here you can see last changed name
    3) If , I re transport the whole META chain from DEV-QA --PRD , will the start variant change or will it cause trouble considering the fact that the start variant was repaired in PROD directly.
    No need to transport again, if you know the start condition of process chain, edit the same in prod and save it.
    Regards,
    Venkatesh

  • Process chain start by dialog process

    Hy Expert, i have a serious problem.When i schedule a process chain , it start by dialog process. What i do for start process chain by background process?
    Thank's a lot.
    Andrea

    HI
    You could do the following:
    1) Create an event variant (i think it was SM63 or something like that)
    2) write a short abab program that raises an event (see example)
    *& Report  start chain
    REPORT  start chain.
    CALL FUNCTION 'RSSM_EVENT_RAISE'
      EXPORTING
        i_eventid                    = 'your created event'
        i_eventparm                  = 'your variant'
    * EXCEPTIONS
    *   BAD_EVENTID                  = 1
    *   EVENTID_DOES_NOT_EXIST       = 2
    *   EVENTID_MISSING              = 3
    *   RAISE_FAILED                 = 4
    *   OTHERS                       = 5
    IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    3)  Scedule your chain by event and activate it (you need to make it periodical to run severeal times).
    4)   Scedule the program.
    Hope this helps.
    Regards,
    Minima

  • Process Chain error after Enpk1(7.01) upgrade - "Termination discovered"

    Hello We have upgraded our BW from 7.0 to  Enhpk1 (7.01) with latest stack.
    After our upgrade I'm seeing our Process chain when a step errors out and there is a next step to continue with always link inspite of the error in prev step, but  the Process chain does not continue and hangs and when checking the log it gives a prompt of "Termination discovered"
    Gives a prompt something like this
    "The analysis of chain ZP_MD_OTHER_CUST showed that process
    ODSACTIVAT ZP_MD_OTHER_CUST_ACTV was terminated However the
    occur) or a metachain Run 4KFMOYW9CGL10CGCQV2ZL691R could
    not be ended due to the termination. It may be the case that
    a metachain was not informed about the error Continue run
    for chain ZP_MD_OTHER_CUST and any corresponding metachain?"
    with yes or No prompt
    So the chain hangs and does continue only after we enter Yes to the prompt.
    We are in Q testing the upgrade this can be big issue when we dont our chain to hang for something that we want to continue always.
    Opened a msg with SAP, they got back say its because of note 1398868 in the support pack, asked us to implement the manual update on RSADMIN and apply another note 1473491 - Chain not continued with termination and "ALWAYS" link.
    But this has not fixed the issue, Have notified back to them and waiting.
    If any of you have encountered this and resolved . pl let me know.
    Thanks
    Mayil

    Since you just upgraded the source SAP system, it's likely that the delta queue doesn't exist for the data and has to be re-initialized. I'd suggest doing an Init w/o Data Transfer and do a Full Repair extraction to catch up on any missed data. From then on, you shouldn't have an issue with your Delta mode extraction from the source system.

Maybe you are looking for