Process Chains transport query

Hi Experts,
When we transport a process chain from rsa1, does not all its varients get transported along with it , do we need to collect them separately,
Please help.
Thanks in Advance,
Nitya

Hi Nitya,
You will have to collect each & every process in the process chain. Better way to collect all processes in PC is:
goto RSPC & open your PC--> From the Menu Process Chain --> Transport.
Now all the dependent objects will be opened. Display it as List > Now select all the required Variants like start variant, and any other variants like AND, OR, DSO activation etc & right click only on the required objects> Transport all below.
Hope it helps!
Regards,
Pavan

Similar Messages

Problem with a process chain transport

Hi all,
I have a problem with a process chain transport, I transport it but when I see the changes in testing environment I dont see it, I did it four times but nothing happen and I dont have errors.
Can anybody tell me how to transport a process chain.
Thanks.

Hi Federico,
When you tranport Process Chains, initially chains will be available under "Not Asigned" node in RSPC Transaction. The transported chains wont be get highlighted automatically. Manually need to open the chain in update mode and activate it on Quality.
Hope it will help you to resolve the problem.
Regards,
Raji

Process chain Transport error in BI7

Hello All,
              We are facing an error while importing a transport request in the BI7 system. The objects collected in the transport request are
InfoPackage
Process chain
Process variants
Table Contents
The error which we are facing is as follows,
Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RSPC (Activation Mode)
Version 'M' of chain LAP_ROM_CS_LOAD_DAILY was saved without checking
Results of check for process     in chain :
Results of check for process     in chain :
Results of check for process LOADING ZPAK_3GBB2YPFIQL01BW1IDLUNON45 in chain LAP_ROM_CS_LOAD_DAILY:
Kindly let us know if you had faced similar problem before.
regards,
Chandran

Hi Chandran,
I think that if you expand the transport/import log further there will be a more detailed error message. Can you
check this? If yes can you let us know what the error message text and error code is? It might be the case that
the note 659160 is relevant for the problem.
Best Regards,
Des.

Where will I specify process chain and query time statistics to be loaded .

I am on BI 7.0. I see on my system, BI Statistics Technical Content has been installed because when I run
RSDDSTAT transaction under Info Provides I see cubes such as 0TCT_C01, oTC_C02, oTCT_C03, oTCT_MC01, 0TCT_VC01..
I also see process chains installed on my system such as oTCT_C2_INIT_P01, oTCT_C2_DELTA_P01.
I see various RSDDSTAT* tables being populated on my system as well.
My questions are:
1.     How does data gets populated in 0TCT_C01, C02 etc? Is it by scheduling TC process chains or there are other means?
2.      Where does one specify what kind of statistics will be copied from RSDDSTAT* tables. My IT lead tells me that process chain statistics are not being collected. I also thing query times are not being populated in 0TCT tables. Where can I specify what should be loaded in these cubes.
3.     Does ST03N transaction display data from 2.
THANKS A LOT.

Hi,
1.     How does data gets populated in 0TCT_C01, C02 etc? Is it by scheduling TC process chains or there are other means?
You can find the DataSource in RSA1. For example, 0TCT_C01 is updated from 0TCT_DS01. And you need to schedule process chain 0TCT_C0_DELTA_P01 for query statistics and 0TCT_C2_DELTA_P01 for data load statistics on a regular basis. Of course, as they are delta chains, you need to first run initializaiton chains for just one time before scheduling delta chains. The initialization chains are 0TCT_C0_INIT_P01 and 0TCT_C2_INIT_P01.
2.      Where does one specify what kind of statistics will be copied from RSDDSTAT* tables. My IT lead tells me that process chain statistics are not being collected. I also thing query times are not being populated in 0TCT tables. Where can I specify what should be loaded in these cubes.
As I know, the statistics data are first stored in RSDDSTAT* tables. For example, query data are stored in RSDDSTAT_OLAP. And the data are loaded to corresponding cubes when you executing InfoPackages.
You can refer to this link and search "Recording BI Statistics" in this page:
http://help.sap.com/saphelp_nw70/helpdata/en/44/3521c7bae848a1e10000000a114a6b/content.htm
3.     Does ST03N transaction display data from 2.
Yes. If BI Statistics content are not activate you would be unable to view statistics data in ST03N.
Let us know if you have other questions.
Regards,
Frank

Process chain transport in BI7.0 from DEV system to PROD system

Hi experts,
I have to create a process chain of master data loading, and i have created the process chain in DEV system, now i want the same in the production system, can you please suggest me which way i do
1) create the same process chain in Production system directly or,
2) should i transport the same process chain to production system, i created in the development system.
and please tell me that what kind of problems in future i will face by following the above steps when the project will be in support state.
thanks in advance for all your expertise experienced help.

It is always advisable to transport the process chain from DEV to Production. You can just do this by simply gather all the necessary objects for process chain into your transport.
During the support phase, you have to monitor the data load through process chain. That can be done via transaction code rspcm. In case there is any error in the process chain ( various errors can be there, data loading error, delta error). In that case you have to go to the step of the process chain when the error occurs (it will be marked as red) , rectify the error and process the step manually at the point so that the following process finishes.
Hope this is clear now.

Process chain transport

Hi Gurus
i hve created a process chain to load data to cube. All the objects are already in prod. like cube, IP, DTP.
Now the question is --> The DTP which is in the prod. system is not same as in dev. (may be somebody has deleted it)
So should i transport the DTP first in a seperate request or can transport the DTP with the process chain
Thanks
BIT

Hi,
This happens in few scenarios... i'm not sure in which case... this happens ,you can check in your system from DEV to QA there will be change.
@Deepak - Transformations and DTP technical names get change from DEV - QA for clarification on this you can cross check in you system itself.
@Bit_sun - yes you can assume that IP technical names will not change and the DTP n Transformations technical names will change not the descriptions.

Process chain transport issue: variant

Hi xperts!
I've an issue regarding incomplete transports of process chain variants.
I've maintained the variant description & the recipient list.
When the request is imported in QAS, I'm missing the details of the variants. QAS-table RSPCVARIANTT is empty regarding type MAIL.
In addition the recipients 've not been imported too.
How can I transport the missing settings?
Pls. give an advice. Txs a lot in advance.
Hermann

Hi,
would suggest you to go by this..
in the RSPC t-code go to the chain you want to transport and activate each step and sub chain if any...firsy and store it in a temporary request ....and then click on the truck button the top.....it will take you to the transport connection and there you can see obnjects are still in temp TR.
delee these TR now refresh the window of transport connection and you will see that it's not present in any TR now.
once done just select the main chain and then again create TR.
this time you can see it contains all the objects.
try to keep only necessary objects and delete all the unwanted objects from that.
Thanks

PSA Deletion Process in Process Chains Transport Question

BI Guru's
I am working on investigating a method of deleting PSA Requests this will be a stand alone process so no loads will be done in this process chain. My question I cannot use the Object Type of InfoPackage or DTP since these objects wont be in the Process Chain leaving me PSA Table option but since I will be developing this in Dev and transporting through environment into prod how will this be handled since PSA tables change from system to system? Does the system automatically translate it for me or will the value stay the same?

Hi Alex,
System will automatically identifies the table in quality and then in Production system. You do not have to worry. I had same question and I tested it with transporting the Process chain from developement to quality. In quality system automatically identified the table corresponding to data target/Master data.
Regards,
Kams

URGENT-Process Chain - transport error

Hi
I am facing a problem in process chains
when I tranport to quality system my chains are not activated after importing it is raising the error as
Error in remote call of destination ABAP Connection
Message no. RSPC051
Diagnosis
The following error occurred during the remote function call for destination ABAP Connection:
Name or password is incorrect (repeat logon)
System Response
A short dump has probably been written in the other system.
Procedure
Look at the short-dump overview in the other system.
I am unable to get the solution!!!!! how to activate the chains in Quality.........It sreally urgent

hi,
chk the start variant of ur process chain whether an start immediate is choosen, if so change it to some date in future and try to transport.
Ramesh

Process chains transport issue

Hi Friends,
I have transported some Master Data Process chains from Dev>Acc>Qty.
When i release the transports they have gone succesfully to my ACC from there when they are moved to Qty couple of Process chains are comepletely Out of sync. I have retransported them again but its the same no change.
Did anyone come across such a strange problem? if yes how did you solve it, Please guide me with your experienc.
Thanks in adv.
Regards
BN

Hi Saveen,
Thanks for your quick reply. I checked the log in se01 of my quality system, it shows no everything as succesful Return Code = 0.
Any other idea?.
Regards
BN

How to find deleted process chain and query

Hi All
Some body has deleted one process chain and one query from development system
how can i know who has deleted these?
is there any table where deleted process chain and queries will maintain????
Thanks & Regards,
Krishna
Edited by: krishnamurthy g on Sep 1, 2008 5:33 PM

Hi,
Usually its totally in tractable to find a deleted chain :
But you can try out with the following options:
1> T-code SLG2 .
2> T-code SLG1 - find out who was logged on to the system on that particular client at that time.
3> Try out the following tables in se16 :
RSPCLOGS --- Application Logs for the Process Chains
RSPCLOGCHAIN --- Cross-Table Log ID / Chain ID
RSPCCOMMANDLOG --- System Command Execution Logs (Process Chains) .
Hope it will be expedite.
Thax & Regards.
Vaibhave Sharma

Process Chain Transport import error

Hi
I created a Process chain with Start variant "Start Using Meta Chain or API" and collected all the objects of process chain in a transport request
The Transport import failed with RC 8 error
Error Log:
Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RSPC (Delete Mode)
0 Chains Were Selected
Specifying process chain ID 'XXX, type V2&', and variant '' has resulted in the selection of 0 process chains. The selection has been called without confirmation by the user. This means that the user was unable to make a selection.
Please update me what is the reason of error and how to resolve this
Thanks

It sounds to me like process chain (PC) that's starts up PC that you trying to transport is not present in target system yet ?
Might be that there is a link between them...

How to find process chain transport no

Dear experts,
I have made some changes in existing process chain and while saving it did not ask me for a transport request.
So I want to check if the process chain has been created as local.
Is there any way to check this. I was looking for some object directory option to check , but could not find.
Please help.
best regards,

You can check this in various ways:
1) simply go to transport connection in rsa1 and drag the process chain to right hand side...there you can see the transport number...
2)Go to rspc -
> process chain from menu bar ---> attribute ---> last change by -> see object catelog--> hit the diplay button for person responsible -
> there you can see the lock view

Process chains start after transporting

Hello friends,
since we've upgraded to NW7 we encounter the problem that process chains start automatically after transporting them from test system to productive system. This ist very unpleasant!
Does anybody encounter this problem too? Ist there a system settig, which disables the automatic start of process chains after transporting?
thnx in advance!

Hi,
Process chains execute when transport request imported :Note 1233327 - Correction: Scheduling of immediate start for transport
In order to stop Process Chains from being scheduled immediately upon import, insert the following into the RSADMIN table with ABAP program
SAP_RSADMIN_MAINTAIN:
Object = NO_TP_SCHEDULE_IMMEDIATE
Value = X
After this change is made to the RSADMIN table, you can import Process Chain transports where the Start process variant has it set to be scheduled immediately.
This entry can be modified in the future by the same ABAP program and just changing the value of Object to space.
rgds,

Error while copying a process chain.

Hi All,
I get an error message while copying the process chain in Production environment.It says "SAP System has status 'not modifiable'".Choose display object or Cancel.I hope this is because of the config. that there is no option to create anything .
Please confirm.
Regards,
Shailja.

Hi Shailja,
That means that you can not change that type of object on Quality or Productive server.
Go to Administrator Workbench, sub menu Transport Connection, there you will find a button called Object Changeability (with a truck). Click on that and change the types of the concerned objects to 'Every changeable' in your case.
Beware that you must change the status not with a double click but with a right click
also refer the following thread you can find your solution
Error message after process chain transport
Hope this helps
Regards
Karthik
<3rd Reminder for points removed>
Message was edited by:
Moderator

Process Chains transport query

Similar Messages

Maybe you are looking for