Process code error

I am getting error in IDOC. Its giving a error in Status Records i.e 51 error no.
Its giving a error message that Function MOdule APPL_IDOC_INPUTI is not found.
Can you please let me know what should be the problem.
Thanks,
vinay.

Look at this blog..will help you to analyse the Problem..
<a href="/people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process of ALE Process</a>
<i>* Reward each helpful answer</i>
Raja T

Similar Messages

  • IDOCs - create new inbound process code   Error

    Hi
    Regarding Zprocess Code in WE42..
    Que-1
    I have already mainted in BD51 . then
    In we42 , When I provide the Zprocess Code and Enter , the following mesages/information I am getting-
    -> The ALE table is not yet maintained for process code ZPUR !
    -> For entry, access 'Function module for ALE-EDI inbound processing'
    Ques-2
    When I was proving OBJECT TYPE : blank  , I was getting the error as " APPLICATION OBJECT TYPE  is not planned ".
    Does it means to maintain anywhere..?
    Please help in this regard.
    Thanks
    Kalpesh

    Hi KALPESH,
    check the below things and try..
    Process code <give ur zprocess code>
    Description test
    Identification <give ur functionmodule>
    Option ALE
    click on radio button Processing with ALE service
    processing type
    click on radio button Processing by function module
    Now press enter button,now u will get transport request,create the transport request nad then u will get the information message
    'Function module for ALE-EDI inbound processing'.Now press enter ,
    u will get a new screen..now from the drop down list select ur zfucnction module..
    give the application object and press on save button..
    now ur zprocess code will be created.
    HOPE THIS HELPS

  • Error while creating inbound process code

    Hi gurus,Iam creating a custom idoc.
    800 -> sender
    810 -> Receiver
    i have completed outbound processing on 800.
    On 810, completed following steps for inbound processing.
    1.) I have added my Inbound FM in BD51.
    2 ) Assigned my FM to Message type and Idoc type in WE57.
    3 ) When adding my FM to process code in BD67, it is showing error that
    “Entry ZSATPC does not exist in TEDE2 - check your entry”.
    { zsatpc is my custom process code }.
    4) While Creating Process Code in WE42 with options [processing with ale service / Processing
    by FM] and saving it is giving error that
    " " is not a valid language.
    And when I saw help (?) regarding this error, the following text appeared in a window.
    Diagnosis
    A key with language "" "" was specified for table "EDE2T". This is not a valid language.
    This applies to field "LANGUA"
    System Response
    The system rejects the key.
    Procedure
    Enter a valid language. This is usually the language you logged on in.
    You logged on in language "EN".
    Table T002 contains a list of valid languages.
    Please solve this error. Give me steps to create inbound process code.
    thanx in advance. Hoping replies soon........
    Satish.

    Dear Satish,
    Very peculiar. The language should come from your log on language. Try to login into the system again. Call we42 again and see if it works.
    Regards, Rakesh

  • Processing status code error

    Hi all,
    What does processing status code "Error" indicate in rcv_headers_interface.There is no error message in po_interface_errors.There is nothing available in the log of Receiving Transaction Processor.Can someone guide me what exactly this means?
    Thanks in advance!!

    Hi Sandy;
    Please see below notes which could be helpful
    Resolving records stuck in the Receiving Transactions Interface [ID 50903.1]
    http://docs.oracle.com/cd/E19509-01/820-4390/ggtrm/index.html
    Regard
    Helios

  • While installing adobe creative cloud , getting the following error msg " There seems to be a problem with the download process. Error code:201"

    while installing adobe creative cloud , getting the following error msg " There seems to be a problem with the download process. Error code:201"

    Creative Cloud Help / Error downloading Creative Cloud applications
    http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

  • PO Rejection - ORDSP Idoc Errors in ECC with different process codes

    Hi All,
    We were testing the Scenario where the Supplier rejects a PO line item as part of the PO Collaboration. On rejecting the PO in SNC, it trigerred an ROC XML with AcceptanceStatusCode == RE. The same was passed on from XML to Idoc in the IDoc segment E1EDP01, field ACTION = "003".
    However, such ORDSP Idocs was failing on the ECC side during Inbound processing with the following errors:
    1. Acknowledgment for PO item 4400000XXX 00010 contains quantity variance: Message no. ME794
    2. Price unit 0 from IDoc differs from unit of purchase order 1: Message no. ME729
    3. Order price unit differs from unit EA from purchase order: Message no. ME728
    4. Order units differ : Message no. ME791
    5. Material number differs from that of ordered material : Message no. ME790
    Note : We dont get these errors for a normal confirmation. It happens only with Rejection.
    The deletion indciator could not be set in the ECC PO line item even after manually correcting the above errors in the Idoc and posting it.
    Then based on this SDN Post: [PO rejection in SNC does not update the items in MM with ORDRSP;, we changed the WE20 settings. i.e., for ORDSP Idoc changed the Process code from ORDR to ORDR_SUS. After this change, the the above errors were eliminated and the the rejection data was also updated on the ECC PO by setting a deletion indicator. But we are having the following issues:
    1. Though both the confirmation & rejection data are getting transferred successfully, the Idocs remain in status 52 (Application document not fully posted).
    2. The message in the status record is "Rejection of PO item 4400000XXX 00010 with reason: Message no. ME749
    3. Came across these 2 related SAP Notes:
       a. #1087422 : But this is not applicable as the note states that this error will occur only if we delete the PO line item before hand in ECC.
    b. # 66192 : This note suggets a custom solution. But actually all the info from the ORDSP Idoc are getting processed successfully (Rejection & Confirmation send in the same Idoc). Only the status of the Idoc (Status = 52) is concerning us.
    Looking forward for inputs / suggetions from those who have used the Rejection functionality in SNC without custom development.
    Regards,
    Bharath

    Hi Bharath
    Rejections is handled like that only, can you please check whether note 1529579 is helpful
    It is standard behavior, as it expects other segments to fill, but never the less the PO will be updated properly, its only problem
    with the status of the idoc....nothing wrong in the data updation. The above note should be handy.
    Regards
    Vinod

  • Ssis execute process task error: process exit code was 1 while the expected was 0

    Hi Sir,
    in my SSIS Package(2012) i am using Execute Process Task which will call bat file.  bat file is located on UNC Path.i am having  the below script in the batch file.
     del \\servername\foldername\name.txt
     rcmd \\servername D:\name1.bat
     del \\servername\foldername\name2.txt
    xcopy \\servername\foldername\file.txt   \\server\foldername\outfilefolder
    i am getting the below error message:
    ssis execute process task error:  process exit code was 1 while the expected was 0
    i want know at what cases error exit code was 1?
    Thanks for your time.

    Hi prasad.alm,
    The error is generic and can be caused by various factors. Here are some suggestions for your reference:
    Manually run the executable to execute the batch file so that we can check whether the command lines in the batch file are correct or not.
    Check there are no duplicate/existing files in the destination folder.
    Try to run the package in 32-bit or 64-bit runtime mode.
    If the issue occurs when running a job, try to create a CmdExec type job step to call the excutable. If this job also fails, it might be an issue between executable and SQL Server Agent rather than the SSIS package itself.
    If the issue persists, enable logging for the package, and check if we can obtain more detailed error message for further analysis.
    Regards,
    Mike Yin
    TechNet Community Support

  • HT4061 I can't download an application from Apple store. A message comes' your request cannot be processed'. Error code 1009

    Hello,
    I cannot download an application from Apple store. A message appeares  "your request cannot be processed. Error code 1009 "

    hi
    i have a messege ( your request cannot be processed error code 1009) my iphone is 4s with ios 7.0.4 .
    so cannot download in itunes
    if i creat a new apple id problem is solved
    thanks

  • HI. Why display on my iphone5 : Your request cannot be processed. Error code :1009

    HI.
    display on my iphone5 : Your request cannot be processed. Error code :1009
    Why???
    tanx

    What were you doing to bring up this error corde? Any other text with the code?

  • IDOC - process code with error "Application Object Type not planned'

    Hi all,
    I am doing an inbound idoc.... in TCODE we42, i trying to put function module which i created, attached to the process code.
    However, when i put my function module ZIDOC_INBOUND to the process code... it comes out error, 'Application Object Type not planned.'
    Why is this so?
    Please advice...
    Thanks and regards...
    William Wilstroth

    HI all,
    I had solved this problem. I should have gone to we57 to tie the function module.
    thanks.
    William Wilstroth

  • TS3694 i trying to restore my iphone at the end of the process during restoring the device shows me the 1015 code error what i have to do now?

    i trying to restore my iphone at the end of the process during restoring the device shows me the 1015 code error what i have to do now?

    Error -1 generally indicates a hardware failure.Your phone's broken.  Buy a new phone, replace the phone through Apple or an authorised service provider, or find a 3rd party repair shop to attempt to fix it.

  • Execute Process Task - Error :The process exit code was "2" while the expected was "0".

    I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2  and updating the old data from db1 to db2.
    For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
    I am using the Execute Process Task  and the process parameters I am providing are:
    WorkingDirectory : C:\Program Files (x86)\Microsoft SQL Server\90\COM
    Executable :      C:\SQL_bat_Files\SQL5\TC_CTI\customer.bat
    The customer.bat file will have the following code:
    tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER"  -f "c:\SQL_bat_Files\sql5\TC_CTI\sql_files\customer1" 
    the .sql file will be generated at:  C:\SQL_bat_Files\sql5\TC_CTI\sql_files\customer1.
    The Problem:
    The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
    [Execute Process Task] Error: In Executing "C:\SQL_bat_Files\SQL5\TC_CTI\package_occurrence.bat" "" at "C:\Program Files (x86)\Microsoft SQL Server\90\COM", The process exit code was "2" while the expected was "0". ]
    Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
    Can anyone help ?

    Jwelch,
    Thanks for the input,
    "Change the SuccessValue property of the Execute Process task from 0 to 2 (which means that you will get a failure if there are no differences, since TableDiff returns 0 in that case)."
               -- Not possible b'coz if there is no difference in the tables, which is also a possiblility, the job will fail.
    "FailTaskIfReturnCodeIsNotSuccessValue to FALSE (which means it won't fail regardless of the code returned)."
              -- Does this mean the job will never fail? Lets say the target table doesnt exist, then, by setting "FailTaskIfReturnCodeIsNotSuccessValue to FALSE " will the job fail? I guess my question is, how is what you've suggested different from setting "ForceExecutionResult = Success". Both the cases will show the task status "Success" even if there is an error.
    Is there a way to keep the property of job 'Failure' if there is any generic errors like target table not found or say, the path given for .sql file output is not valid etc.
    Thanks again,
    Little_Birdie.

  • Hi my friends why I can't download from App Store,during the download process shows error code 9001

    Hi my friends why I can't download from App Store,during the download process shows error code 9001
    I 'm from Iran and like apple very much I waiting for your response... !

    In short, because you are in Iran and probably trying to use the App store in another country. You can search the forums for several other threads on this topic.

  • Error While Running Scenario-Wrong Return Process Code

    Hi ,
    We have Main Package having 2 packages scenarios in it.
    1.Main Package
    2.First Pckg- Scenario1,Scenario2,Scenario3
    3.Second Pckg-Scenario1,Scenario2
    When i am running Main Package Scenario i am getting error as "Wrong Return Process Code" on unix procedure which is basically for rmoving header and trailer information and placing in flat file.
    But if i run the Main package with only First Package Sscenarios seperately (Scenario1,Scenario2,Scenario3) then it is running properly.
    Can anybody help me on it.
    Thanks
    Ashwini

    i am performing cold backup cloning on R12.0.0
    it is single node to single node clonning.
    I have performed perl adcfgclone on dbTier itis successfull.
    Now i am running on appsTier
    my database and listner are up and running
    perl adcfgclone appsTier
    It has given error stating tht failed to execute adclone. and see logfile i had seen that logfile of ApplyApplTop and i got this error their.
    Along with it is is also showing error code 25600

  • "Wrong process return code" Error which using OS Command

    Hi,
    I want to execute a shell script in unix which calls a sed script and input to the script is an xml file. I am using OS Command tool to call the script which fails with "Wrong process return code" error. I ran the command directly on UNIX box and works fine but fails when executed through a package in ODI.
    The command I am passing in OS Command window is as follows:
    /test/callSed.sh emp.xml
    I also tried ODIOSCommand but getting the same error. The shell script has execute privileges for all users. Is there any other property to be set up for running shell scipts through ODI?
    Appreciate you response.
    Thanks!

    Hi,
    Thanks for a quick response.
    I tried both the commands you sent. "sh ./test/callSed.sh emp.xml" threw Wrong process return code error and "./test/callSed.sh emp.xml" threw the following error:
    java.io.IOException: Cannot run program "./test/callSed.sh": java.io.IOException: error=2, No such file or directory
         at java.lang.ProcessBuilder.start(ProcessBuilder.java:459)
         at java.lang.Runtime.exec(Runtime.java:593)
         at java.lang.Runtime.exec(Runtime.java:431)
         at java.lang.Runtime.exec(Runtime.java:328)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execOsOrders(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execOsOrders(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(SnpSessTaskSqlS.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenario.java)
         at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
         at com.sunopsis.dwg.cmd.e.k(e.java)
         at com.sunopsis.dwg.cmd.g.G(g.java)
         at com.sunopsis.dwg.dbobj.SnpScen.a(SnpScen.java)
         at com.sunopsis.dwg.dbobj.SnpScen.localExecuteSync(SnpScen.java)
         at com.sunopsis.dwg.tools.StartScen.actionExecute(StartScen.java)
         at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(SnpsFunctionBaseRepositoryConnected.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrdersIntegratedFunction(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(SnpSessTaskSqlS.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
         at com.sunopsis.dwg.cmd.e.k(e.java)
         at com.sunopsis.dwg.cmd.g.A(g.java)
         at com.sunopsis.dwg.cmd.e.run(e.java)
         at java.lang.Thread.run(Thread.java:619)
    Caused by: java.io.IOException: java.io.IOException: error=2, No such file or directory
         at java.lang.UNIXProcess.<init>(UNIXProcess.java:148)
         at java.lang.ProcessImpl.start(ProcessImpl.java:65)
         at java.lang.ProcessBuilder.start(ProcessBuilder.java:452)
         ... 31 more
    Regards,
    Aks

Maybe you are looking for