Process code for Function Module IDOC_INPUT_MBGMCR

hello!!
here i m tryin to create n inbound idoc
idoc type - MBGMCR02
Function Module - IDOC_INPUT_MBGMCR
but i dont knw the process code for dat can ny 1 help me to find it?
1st of all how to find da process code if u hav the FM ?
it wld b more helpful if ny1 cld give me the process code
thank u
ashwinee

hai
if u dont have process code r cant able to find process code,
u create process code its very easy.
for inbound, go to
   TX-WE42.
click create give ur process code and give that function module.
in processing type,
           u check the radiobutton as processing by function module and save it.
then, u can use this process code in our partner profile .
any doubt regarding this u can ask me.
Message was edited by:
        tamilarasan kandasamy

Similar Messages

Assigning of process code to function module

hi all,
please let me know where to go for assigning teh process code to function module. i am unable to get the function module from the process code(we42). please let me know
thank you
chan

In WE42 itself we can assign the process code to a FM.
select new entries.
Enter a process code name & description.
Enter Ur FM in Identification Field.
Now select Processing by Function module in Processing type.
Save it.
For outbound do the same thing in WE41 tcode

Processing code and Function Module for IDOC

hi forum,
i m trying to make a file to IDOC scenario,
the IDOC is being sent to a R/3 system,
for the purpose, in R/3 i need to make a inbound processing code, can u tell me how to make a processing code and link it with a Function Module.......
can u guide me....

sudheer,
If you are using standard idoc then you do not need to create new processing code.
There would be standard processing code available. You need to set input partner profile with processing code.
Let us know which idoc type you are using for inbound posting.
Anyway..TC for Creating processing code is : WE41(Outbound) and WE42 (Inbound)
Nilesh

Process code's function module required for the IDOC Message type PROACT

Hi,
I am trying to trigger an IDOC from ME32K transaction which will carry my Contract agreement details to XI. The IDOC I am using for this purpose is PROACT.PROACT01. But I couldn't find the outbound process code / Function module for the process code associated to this IDOC message type.
Pls help me out....
Thanks,
Ram Kalyan

I checked table EDIFCT for the message type and found this:
Function module Function type Basic type Message Type
IDOC_INPUT_PROACT F PROACT01 PROACT
Oops...I think you are looking for outbound..Ignore

XI-- IDOC scenario, how to link process code with function module

Hi Forum,
I have a XI--->IDOC (R/3) scenario,
where i m creating a IDOC in XI and sending it to R/3,
i have done all settings to send the IDOC from XI to the R/3,
i also have the function module to process that IDOC in R/3,
the problem is:
I want to know in details (step by step) how to make a Idoc Inbound process code, link it with the function module and use the process code in the Partner Profile in R/3,
pls help

HI,
FOr this u need to go to transaction WE41 for inbound and WE40 for outbound there u assign the function module.
Now u go to WE20 transaction for partner profile and u can assign the proces code to the inbound message.
Go to the below help for more information:
http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/frameset.htm
Inbound process code:
http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/frameset.htm
Thnx
Chirag

Help code for function module

Hi Gurus,
I have to connect two table through function module in ECC side.
Both table contains some field.
I am not much familiar with ABAP.
So PLease give some demo coding for this.
Coding to connect two tables by function module.
Thanks.
Saurabh Jain

Hi,
Please find the sample code.Here I am extracting data from three tables.
SELECT
               a~vbeln
             a~MATNR
             a~CHARG
             a~POSNR
             a~SPART
             a~ERDAT
             a~AEDAT
             a~KWMENG
             a~PSTYV
             c~KUNNR
             c~VKGRP
             c~VKBUR
             c~VTWEG
             c~VKORG
             c~BUKRS
             c~VKGRP
             FROM((VBAP AS a INNER JOIN VBPA AS b
                        ON avbeln = bvbeln
                       AND aposnr = bposnr)INNER JOIN VBAK AS c ON cvbeln = bvbeln
                                                                   AND cposnr = bposnr).
Modify in the way you want and Just include these codes into the Funtion module you create.
I Hope it my help you.
Regards,
Prem

Help on Code for functional module generic extraction - needed.

Hi Experts,
Can you pleaese help me on : how to pass data to the structure created.
How to fill the structure in functional module extraction (structure) from i_t_final to e_t_data.
we are using include programe in the extraction.
help appreciated.
Thanks Much
kannan

Hi Shreem,
Check if the following SDN Article link is helpful.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c062a3a8-f44c-2c10-ccb8-9b88fbdcb008?QuickLink=index&overridelayout=true
http://www.erphowtos.com/guides-a-tutorials/doc_view/534-generic-extraction-using-function-module-fm.html
Best Regards,
Kush Kashyap

Process Code for Message Type LOIPRO(in ALE/IDOCS)

Hi all,
I have to implement Production order Interface(create Production order,change Production order etc).The requirement is for eg:,I created one production order and posted it;it should get reflected in the recieving system.Does anyone know the process code for LOIPRO.I checked it in we42,WE64 and even the tables TEDE1 and TEDE2.But its not available.Process code and function module is necessary to continue with WE20.
Thanking you in advance,
anjaly

Hi
it may sound like not good news, but I think the answer is described in OSS Note 198252 - Special features of POI message category LOI*.
There all LOI* idocs are mentioned and then they say:
The message categories named are part of the POI (Production Optimization interface) interface.This interface and the message categories contained in it were developed for the transfer to non-R/3 systems.Therefore, an inbound processing in the R/3 system is not planned.The message categories are transferred via separate transactions / reports of the POI interface (Transactions POIM, POIT).Functions which exceed these transactions are not supported.For this reason, the above-mentioned ALE functions cannot be used for the message categories described.
So, in short, there is no inbound process code for LOIPRO.
Inbound processing then should be done through self-developed programs / idocs, calling BAPI-s (for example).
Regards,
Joe
Edited by: Joseph Yasman on Jun 30, 2009 1:46 PM

Interface for function module is incorrect in ALE inbound processing

I have created a custom function module and i assign this FM
to the custom process code for ALE INBOUND process and i already assigned this Fm to message type and basictype in Tcode we57.i have assigned this process code to the msgtype in WE20 also.
But while trying to execute the inbound function module through WE19, I get an error message: "interface for the function module is incorrect". What could be wrong?

Hi
if you ibserve clearly all the FM's will be having same parameters. Your function module also should contain same interface. Ensure that your FM does contain the same.
*" IMPORTING
*"     VALUE(INPUT_METHOD) LIKE BDWFAP_PAR-INPUTMETHD
*"     VALUE(MASS_PROCESSING) LIKE BDWFAP_PAR-MASS_PROC
*" EXPORTING
*"     VALUE(WORKFLOW_RESULT) LIKE BDWF_PARAM-RESULT
*"     VALUE(APPLICATION_VARIABLE) LIKE BDWF_PARAM-APPL_VAR
*"     VALUE(IN_UPDATE_TASK) LIKE BDWFAP_PAR-UPDATETASK
*"     VALUE(CALL_TRANSACTION_DONE) LIKE BDWFAP_PAR-CALLTRANS
*" TABLES
*"      IDOC_CONTRL STRUCTURE EDIDC
*"      IDOC_DATA STRUCTURE EDIDD
*"      IDOC_STATUS STRUCTURE BDIDOCSTAT
*"      RETURN_VARIABLES STRUCTURE BDWFRETVAR
*"      SERIALIZATION_INFO STRUCTURE BDI_SER
*" EXCEPTIONS
*"      WRONG_FUNCTION_CALLED

Process code for Idoc BANK_CREATE01 and BANK_CHANGE01

hi,
I want to create partner profile for Idoc BANK_CREATE01 and BANK_CHANGE01 standard Idocs.
But in transaction we64 , i am not finding the inbound process code for it.
So di i have to create a process code for it??
If yes , how do i create it and also the function module to be created.
kindly help.
Regards,
Loveena

hi ,
To create a partner profile <b>Tcode WE20.</b>
for your inbound or outbound idocs , just add these idocs in outbound or inbound parameters . For Idoc to File or File to Idoc , it is sufficient.
before creating partner profile you have <b>to create port Tcode WE21</b>
hope this will help
regards
HONEY

Process code for IDOC Output from MIRO

Hi,
We need to find the Process code for IDOC output to assign Output type in ECC. We need the IDOC output to some other system like PR while doing the invoice Posting (Transaction code MIRO). We tried Using process code SD09 for the IDOC with IDOC Type INVOIC02. In SD09 we are getting error (Update terminated) when we trigger the output while saving in MIRO transaction.
Further we understand that process code SD09 is used for SD billing and Invoice process.
We need your help in
1. getting the correct process code for the IDOC generation for Invoice posting thru MIRO.
2. If we need to configure one process code, let me know the correct function module for the same.
Please Note, we need this as Output Idoc from Invoice Posting MM (MIRO).

Hi Shankar,
Thanks for quick for reply. We have tested this process code with IDoc type - GSVERF03 and message type - GSVERF. It worked for us for MIRO transaction.
we are testing with IDoc type INVOIC02.
once again thanks for sharing the process code.
Regards,
Brahma

What is the process code for message type FIXEDASSET_CREATE?

Hi all
please tell me that what is the process code for
MESSGAE TYPE = FIXEDASSEt_CREATE,
FUNCTION MODULE = IDOC_INPUT_FIXEDASSET_CREATE,
BASIC TYPE = FIXEDASSET_CREATE01 ?
thanx in advance.......
Edited by: Prachi Sharma on Jan 11, 2008 7:45 AM
Edited by: Prachi Sharma on Jan 11, 2008 8:03 AM

Hi,
Check the Tcodes WE41 and WE42 for Outbound and Inbound process codes
Check below Tables as well
EDE1T
EDE2T
EDE5T
EDE6T
TEDE5
TEDE6
Regards,
Satish

EDI Process code for PLANDATATRANSFERCO_POSTACTIO01

Dear all,
does anybody have an idea, how to post an PLANDATATRANSFERCO_POSTACTIO01 idoc?
I can't find a valid process code for this idoc.
I searched for it in table TMSG2, but no valid entry.
How to post such an idoc?
Any suggestions?
Thanks a lot in advance
Harry

We use:
Partn.Type LS Logical system
Message type PORDCR Create purchase order
The Bapi BAPI_IDOC_INPUT1 does a select on table TBDBA for the fuction name based on the message type and calls the corresponding function module.

Process code for inbound credit Memo

Hi All,
May know what is the process code for inbound Credit Memo (Return of Goods)
Thanks,
Matthew

Hi Gautham,
I checked the IDOC in BD87 tcode and it is saying "Function module not allowed: IDOC_INPUT_ORDRSP".
I gave ORDR as the process code in the inbound parameters of the receiver system partner profile.
In the sender system, I gave me10 as the process code. And there the status is 12, so everything is fine over there.
Vishwa.

Specific process code for Production order message type LOIPRO

Hello,
Is there any specific process code for Production order message type LOIPRO.
Request you to reply.
Thanks
Prashanth

Hi Prashanth,
sorry for last thread ... that not contain full information ...
For message type LOIPRO you can use process code APLI.
In IDOC PARTNER definition, the partner is linked with an IDOC TYPE and PROCESS CODE for inbound processing. This process code is in turn linked with a FUNCTION MODULE to process the IDoc such as IDOC_INPUT_INVOIC_MRM (Reff.. http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_cid519558,00.html)
Regards,
Amit

Process code for Function Module IDOC_INPUT_MBGMCR

Similar Messages

Maybe you are looking for