Process code for IDOC Output from MIRO
Hi,
We need to find the Process code for IDOC output to assign Output type in ECC. We need the IDOC output to some other system like PR while doing the invoice Posting (Transaction code MIRO). We tried Using process code SD09 for the IDOC with IDOC Type INVOIC02. In SD09 we are getting error (Update terminated) when we trigger the output while saving in MIRO transaction.
Further we understand that process code SD09 is used for SD billing and Invoice process.
We need your help in
1. getting the correct process code for the IDOC generation for Invoice posting thru MIRO.
2. If we need to configure one process code, let me know the correct function module for the same.
Please Note, we need this as Output Idoc from Invoice Posting MM (MIRO).
Hi Shankar,
Thanks for quick for reply. We have tested this process code with IDoc type - GSVERF03 and message type - GSVERF. It worked for us for MIRO transaction.
we are testing with IDoc type INVOIC02.
once again thanks for sharing the process code.
Regards,
Brahma
Similar Messages
-
What is the Process code for IDoc SISCSO01
Hi all,
I am using 4.6c version.
I am going for an outbound IDoc SISCSO01 for sales Order confirmation.
I want the process code (we41) which suits this IDoc SISCSO01.
Can you please help to get the process code so that my IDoc can be sent succesfully.
Best Regards,
GangoluHi Gangolu,
I don't think there is an outbound process code for IDoc type SISCSO01.
But you can generate the IDoc with this FM <b>MCV_STATISTICS_ALE_OUT_ORDER</b>. But you still need to setup partner profile, distribution model and etc.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful. -
Process code for Idoc BANK_CREATE01 and BANK_CHANGE01
hi,
I want to create partner profile for Idoc BANK_CREATE01 and BANK_CHANGE01 standard Idocs.
But in transaction we64 , i am not finding the inbound process code for it.
So di i have to create a process code for it??
If yes , how do i create it and also the function module to be created.
kindly help.
Regards,
Loveenahi ,
To create a partner profile <b>Tcode WE20.</b>
for your inbound or outbound idocs , just add these idocs in outbound or inbound parameters . For Idoc to File or File to Idoc , it is sufficient.
before creating partner profile you have <b>to create port Tcode WE21</b>
hope this will help
regards
HONEY -
Hi All,
Can you please send me the process codes for the following IDOC types as I could not find them in WE64. Also let me know how did you found out.
IDOC types are:
1) INTERNAL_ORDER_CREATE01
2) PROFITCENTER_CREATE01
3) COSTCENTERGROUP_CREATE01
Urgent help is really appreciated.
Regards,
ShahuHi,
1) INTERNAL_ORDER_CREATE01
Please clarify for which order you are using this.
2) PROFITCENTER_CREATE01 -
PRCM (PRCMAS)
3) COSTCENTERGROUP_CREATE01
COSM (COSMAS)
Reward points if useful.
Regards,
Atish -
Hi,
I have a function module which is assigned to a Process Code. How can i find the Process code for this Function Module?..Pls help
RamHi Prabha,
If it is <b>Outbound</b> Process Code use <b>WE41.</b>
If it is <b>Inbound</b> Process Code use <b>WE42.</b>
Regards,
Raghav -
How to create process code for idoc bank_create01 in testing client
hi,
I am using Idoc BANK_CREATE01 and BANK_CHANGE01 to post idoc to R/3 in inbound side.
there is no standard process code available for this idoc
But there is a function module idoc_input_bank_create which posts data to r/3 from the idoc.
So i created a zprocess code and attached this function module to it.
But all this i have done in the development client , but it is not being reflected in the testing client
And i am not able to create Process code in we42 in testing client since it is not modifiable.
So , is transaction we42 client 42??
Or is there any way that whatver i create in dev client should also reflect in testing client
Please help
Regards,
LoveenaHi,
While Creating the process code u have to save under transport ID under which id u have stored it,transfer that id into QA system then u can test ur IDOC.
If u have created it under local object then u have to agin store into one tranport id and then transfer it.
Regards,
Phani
Reward points if Helpful -
How to write processing code for the Inbound IDOC to the R/3 ??
i m having a file -> XI-->R/3 scenario,
IDOC is being sent from XI to R/3,
can u guide to me to write a processing code for the Inbound IDOC to the R/3,
since i m new to ABAP and ALE technology, can we provide me any blog for doing that.......or guide me....Hi Sudeep
Simple File to Idoc scenarion blog
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
Also see the blog
<a href="/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi Steps for Posting IDOC's</a> by Ravikumar.
Configuration of IDOC adapter
http://help.sap.com/saphelp_nw04/helpdata/en/96/791c42375d5033e10000000a155106/frameset.htm
Regards
Santhosh
*Reward points if useful* -
Process code for Outbound IDOC type MBGMCR03
Hi Friends,
I have a requirement, where in Goods receipt IDOC data from ECC 6.0 needs to be sent to the external system through XI, for that require a process code. Can you all suggest the process code for the outbound IDOC for Goods Receipt.
Thanks in Advance,
Meghna.Hi,
Goods Movement is genarally inbound.
You may have to write your own process code for MBGMCR03.
Regards,
Shakthi. -
Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 ,214
Hi friends,
Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 (Response to a Load Tender)., 214 (Shipment Status )
For shipement status i got trxstc01 for idoc type .. but its only before 4.6 version ..for 4.7 its not there .. please give the alternate for that ...
Thanks in Advance ....
If any one is provide exact answer i will give Max marks ..
Edited by: ajay KOLLA on Aug 6, 2009 8:04 AMHi,
Have you resolved this issue. If yes, can you please let me know. Im actually looking for same for EDI 867 (guess it is for summary report and need to know message type, Idoc type associated with this).
Rgds
Sudhanshu -
Message type ,IDOC TYPE , PROCESS CODE for Edi 990
Hi ,
Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 (Response to a Load Tender).
Thanks in Advance.
Ajay KollaHi
Pls check the below links
1. http://www.erpgenie.com/sap/sapedi/ansi.htm
2. http://www.erpgenie.com/sap-technical/ale-edi-b2b/master-data-message-types-idoc-types
Hope this may helps you.
Regards
Sirigiri -
Process Code for Message Type LOIPRO(in ALE/IDOCS)
Hi all,
I have to implement Production order Interface(create Production order,change Production order etc).The requirement is for eg:,I created one production order and posted it;it should get reflected in the recieving system.Does anyone know the process code for LOIPRO.I checked it in we42,WE64 and even the tables TEDE1 and TEDE2.But its not available.Process code and function module is necessary to continue with WE20.
Thanking you in advance,
anjalyHi
it may sound like not good news, but I think the answer is described in OSS Note 198252 - Special features of POI message category LOI*.
There all LOI* idocs are mentioned and then they say:
The message categories named are part of the POI (Production Optimization interface) interface.This interface and the message categories contained in it were developed for the transfer to non-R/3 systems.Therefore, an inbound processing in the R/3 system is not planned.The message categories are transferred via separate transactions / reports of the POI interface (Transactions POIM, POIT).Functions which exceed these transactions are not supported.For this reason, the above-mentioned ALE functions cannot be used for the message categories described.
So, in short, there is no inbound process code for LOIPRO.
Inbound processing then should be done through self-developed programs / idocs, calling BAPI-s (for example).
Regards,
Joe
Edited by: Joseph Yasman on Jun 30, 2009 1:46 PM -
Message type and Process Code for 940 IDoc
Hi,
what Message type and Process Code can be used for 940 IDoc when a SHPMNT05 IDoc is being used. We are using SHPADV message, SHPM process code for ASN. Can I use the SHPMNT message type for 940?
thanks,
Kumar.should SD11 be the only process code to be used or can we use SHPM. I guess we can use both for shpmnt05. But how do I know which process code is more suitable for my purpose. is there any place where i can check that info?
Can we link SHPORD message type to a SHPMNT05 IDoc? i think this message type is more suitable.
thanks,
Kumar. -
Process Code for Outbound Idoc
Hi All,
We need to find out the Process Code for an Idoc.
Note : We dont have access to WE41, WE20 ,BD51.
Could you please suggest any alternatives.
Thanks,
SanjeetHi Gautham,
Thanks for ur reply.
But still we hv not *** to the solution.
We have available information as following:
Basic Type : DESADV01
Extension Type : EXTDES03
Message type : DESADV
Partner NUmber : XXXXXX
Partner Type : KU
I checked in Table TMSG1 and i got more than one similar process codes for the same message type.
Actually I have the generated Idoc number and we are trying to reach to the FM which populates the Idoc segments.
So if we get the process code, we can reach to FM.
Thanks,
Sanjeet -
Hi...Is there an SAp std process code that uses the FM - IDOC_INPUT_PREQCR
PR creation
regards,
Arvind RHi Shankar,
Thanks for quick for reply. We have tested this process code with IDoc type - GSVERF03 and message type - GSVERF. It worked for us for MIRO transaction.
we are testing with IDoc type INVOIC02.
once again thanks for sharing the process code.
Regards,
Brahma -
How to assign function module with process code in IDOC ?
how to assign function module with process code in IDOC ? and what code i have to write in that function module for custom IDOC ?
helpful answer will be rewarded?Hi,
First goto transaction we42 -->editing mode --> new entries -->give name of your process code and description --> processing with alv service and function module -->then press enter -->after that enter the name of the function module you want to associate from the drop down and save it.
Thats the way to assign function module with process code.
In that process code we will have the Function modules and Bapi's which will take the data which we are sending through IDOC and then process it.
for example: i am triggering the IDOC for every purchase order created then this process code in the receiver system will take the data which i have enetered in the sender system to create the purchase order and process it and creates the same purchase order in the receiver's system.
Reward if helpful.
with regards,
Syed
Maybe you are looking for
-
How do I export a video from my iPhone to a friends computer?
How do I export a video from my iPhone to a friends computer?
-
My wifi button is not working to turn it on my 4s
My wifi button will not turn on, on my 4s it doesn't even give me the option to turn it on or off. What can I do to fix this problem?
-
Leopard 1.5.2 and all other current updates installed as of February 12, 2008. Macbook white April 2007 no other problems. I have imported some raw images from a Nikon D80. They show in the iPhoto events browser but when I try to edit them all the me
-
Hello, We are days away from a deployment, and the cRio was working great until this afternoon. To start the sntp demon, I modified the ni-rt.ini file according to these instructions on the NI site. I turned the logs on to make sure it was working.
-
Inconsistent characteristic value assignment
Hi When I am trying to change the value of the characteristic for relase strategy ; the system is giving me error "Inconsistent characteristic value assignment" Kindly reply me