Process Code for Message Type LOIPRO(in ALE/IDOCS)

Hi all,
        I have to implement Production order Interface(create Production order,change Production order etc).The requirement is for eg:,I created one production order and posted it;it should get reflected in the recieving system.Does anyone know the process code for LOIPRO.I checked it in we42,WE64 and even the tables TEDE1 and TEDE2.But its not available.Process code and function module is necessary to continue with WE20.
Thanking you in advance,
anjaly

Hi
it may sound like not good news, but I think the answer is described in OSS Note 198252 - Special features of POI message category LOI*.
There all LOI* idocs are mentioned and then they say:
The message categories named are part of the POI (Production Optimization interface) interface.This interface and the message categories contained in it were developed for the transfer to non-R/3 systems.Therefore, an inbound processing in the R/3 system is not planned.The message categories are transferred via separate transactions / reports of the POI interface (Transactions POIM, POIT).Functions which exceed these transactions are not supported.For this reason, the above-mentioned ALE functions cannot be used for the message categories described.
So, in short, there is no inbound process code for LOIPRO.
Inbound processing then should be done through self-developed programs / idocs, calling BAPI-s (for example).
Regards,
Joe
Edited by: Joseph Yasman on Jun 30, 2009 1:46 PM

Similar Messages

  • What is the process code for message type FIXEDASSET_CREATE?

    Hi all
    please tell me that what is the process code for
    MESSGAE TYPE = FIXEDASSEt_CREATE,
    FUNCTION MODULE = IDOC_INPUT_FIXEDASSET_CREATE,
    BASIC TYPE = FIXEDASSET_CREATE01 ?
    thanx in advance.......
    Edited by: Prachi Sharma on Jan 11, 2008 7:45 AM
    Edited by: Prachi Sharma on Jan 11, 2008 8:03 AM

    Hi,
    Check the Tcodes WE41 and WE42 for Outbound and Inbound process codes
    Check below Tables as well
    EDE1T
    EDE2T
    EDE5T
    EDE6T
    TEDE5
    TEDE6
    Regards,
    Satish

  • What is the process code for Message type FUNDMA

    Hi,
    I am sending CO elements to the distributed server using ALE. Can somebody tell me what is the process code for the message type FUNDMA?
    Thanks
    William

    Check entries of table VEDI_TMSG1. This contains Message types and associated Process codes.
    Hope this helps.
    ashish

  • Process codes for message types IORDER and INOTIF

    Hi All,
    I need to know the process code for above message types.
    I could not get specific process code in WE64.
    Regards,
    Shahu

    Hi,
    Try searching in WE42.
    This is what i found we64 (same for both message types):
    ABI_AIDN_IN
    ED00
    ED00_XML
    ED08
    Good luck! Reward if helpful.
    Message was edited by:
            John Damion

  • How do I execute IDOC for message type LOIPRO

    How is it possible to execute IDOC using message type LOIPRO which I have configured with change pointers?   Change pointers are using object ORDER.
    I am looking to only generate IDOC for production order changes / updates that meets the criteria set by the change pointers.  If something in the order changes, but that field is not being looked at by change pointers, I don't need IDOC to pick up that order.
    I don't want to have to run RCCLTRAN or RCCLORD on a scheduled job. Only need to have activity if change pointers are activated. Am I going down the wrong road using LOIPRO ?

    Hi Bob,
    Could you please guide me through the process of creating/triggering a change pointer based LOIPRO? Your help much appreciated.
    Tabraiz

  • PO invoice through IDOC --Need Standard Process code and Message Type

    Hi All,
    could any one send me SAP Standard Message type and SAP Standard process code for posting Vendor PO invoice.
    Thanks
    Raghu

    Hello,
    Standard Message type: INVOIC, Process Code: INVL, IDOC type INVOIC02.
    Thanks,
    Venu

  • Too many recipients found for message type in the ALE model

    Hello Friends,
                            Please help me in solving this error. I have a Outbound sales order confirmation ORDRSP  .
    In the distribution model i have defined the sender receiver and message type clearly...
    But  in va01  after creating sales order  extras ->Output->Hearder --->Edit
    Output type-- BA00
    medium --ALE
    Dispatch time : Send Immediately
    I am getting a error -
    Too many recipients found for message type ORDRSP in the ALE model
    Message no. B1130
    Diagnosis
    In the ALE distribution customer model several recipient systems for IDOCs with message type ORDRSP and filter object type 'KUNNR' with value '100' have been modeled from this system, but only one recipient system is allowed.
    Procedure
    Please change the ALE distribution customer model so that it allows only one recipient system for the message from this system.
    Please help me in solving this error.
    Regards,
    jeevan

    Hi Jeevan,
    In BD64, the said problem occurs, since the message type ORDRSP will be configured to different Logical System.
    Since you are creating sales orders & Output type, system doesnt knows, to which Logical system, it has to be sent since the Message type exists more than once.
    select Your respective Logical System where the Outbound Sales Order Confirmation ORDRSP has been created.
    Under the node ORDRSP, add the filter group for Customer.
    Double click the Filter group and add the respective Customer No.s to whom the Order confirmation needs to be sent.
    Then create Sales Order Confirmation & Output type. Data will be passed(IDoc) to the respective Customer(where the customer no.) exist in the filter.
    Hope it solves your Issues.
    Regards,
    Anbalagan.

  • Creation of Process code for output type

    Hi,
    Could someone help me out in defining processcodes for output types.
    Thanks in advance,
    Yaseen

    Hi Yaseen,
    The Tr.code WE41 and WE42 are also used for maintaining process codes.
    To maintain process codes in WE41 or WE42, Go to these Tr.Codes and Click on the Change button. Then click on "new entries" button to create your new process code.
    FYI, Outbound process codes are stored in SAP Table TEDE1 and inbound process codes are stored in SAP Table TEDE2.
    Hope this helps.
    Rgds,
    Sam Raju
    Message was edited by: Sam Raju

  • Process code for project

    Hii ,
    I was just wondering if there was an inbound process code for message type PROJECT . I am trying to generate a inbound partner profile for message type PROJECT and idoc type PROJECT01 . I am not sure what process code should i use . Please tell me
    thank you

    Hi,
    The process code to use with Project/Project01 is 'BAPI' as the interface is based on a Bapi concept.
    Regards
    JF

  • Specific process code for Production order message type LOIPRO

    Hello,
    Is there any specific process code for Production order message type LOIPRO.
    Request you to reply.
    Thanks
    Prashanth

    Hi Prashanth,
    sorry for last thread ... that not contain full information ...
    For message type LOIPRO you can use process code APLI.
    In IDOC PARTNER definition, the partner is linked with an IDOC TYPE and PROCESS CODE for inbound processing. This process code is in turn linked with a FUNCTION MODULE to process the IDoc such as IDOC_INPUT_INVOIC_MRM (Reff..  http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_cid519558,00.html)
    Regards,
    Amit

  • IDOC Message Type LOIPRO (Production order)

    Hi All,
             How I can setup Process code for inbound Production order (Message Type LOIPRO)
    I receive idoc file from external SAP system I try to use "BAPP" , "ABI_AIDN_IN" , "APLI" it not work for
    this message type. Idoc error message "Function module not allowed: APPL_IDOC_INPUTI"
    Regards,

    It should go with BAPI..have you tried that?

  • Process code for 869(EDI ) Order Status Inquiry Message type.

    Hi Gurus,
                       Please can any one help in providing Process Code for 869 Order Status Inquiry Message type.
    Thanks,
    Sudhakar

    Hi Everybody.
    There's no standard process code for LOIPRO Outbound Idocs.
    This Idocs are threated as master data info, and could only be automatically generated by Data Distribution Model.
    BD64.
    Anyway, you can define your own Outbound Process Code in WE41 using CLOI_MASTERIDOC_CREATE_LOIPRO FM.
    You can choose.
    Regards.
    Albert.

  • Message type ,IDOC TYPE , PROCESS CODE for Edi 990

    Hi ,
    Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 (Response to a Load Tender).
    Thanks in Advance.
    Ajay Kolla

    Hi
    Pls check the below links
    1. http://www.erpgenie.com/sap/sapedi/ansi.htm
    2. http://www.erpgenie.com/sap-technical/ale-edi-b2b/master-data-message-types-idoc-types
    Hope this may helps you.
    Regards
    Sirigiri

  • IdocType, Message Type & Process code for Payroll Posting

    Hi Gurus,
    In My Project, the SAP HCM is Maintained as a separate instance and rest such as FI/CO resides in ECC ERP. Now We need to Interface the HCM Instance with ECC ERP, where FI/CO resides to post Payroll Results. Hence I am writing a Technical Specs for ALE interface between SAP HCM and ECC ERP. I came to know that a standard ALE is existing for this purpose and I hereby need its Idoc type, Message Type and Process code for the same.
    Thanks in advance.
    Regards
    Vinoth Kumar.R

    Guys
    I could not use above message type/idoc type as they are not released in SAP.
      So i am again back to where i have come from. I am trying to use DESADV01 and Mess Type DESADV.
    Regards
    Srikanth M

  • Required Outbound Process Code for MessageType LOIPRO (Basic type-LOIPRO01)

    Hi EDI Gurus,
    I need to know the outbound Process Code for MessageType LOIPRO (Basic type-LOIPRO01).

    Hi,
    there is no process code for MessageType LOIPRO .
    check the below link u will get the clear idea.
    Re: Process Code for Outbound Production Order??
    Reward if helpful.
    Regards,
    Nagaraj

Maybe you are looking for

  • Binding images to the Image class

    Hi everyone, I do not know how to bind my images to the image class in order to change its width and height. So, if you know how toconstitute relations between Image class and the images, please inform me. Thanks, Mert

  • Accessing Flash in a portlet

    hi all, I need to acess a flash file in a portlet.I am able to do that using <iframe> tag in mine .aspx . Is this possible to add flash file in other way. can i access .swf file directly from a portlet. regards Vineet

  • Planning Dependent Demand with Phantom Strategy (59)

    Hi We would like to maintain forecasts at a Phantom material level and consume this forecast based on dependent demand (Planning Strategy 59 in ECC and an equivalent custom strategy in APO). This works in ECC MRP, but does not appear to work in APO C

  • Safari and Calendar don't works correctly

    Since yesterday Calender and Safari do not work. When I load Safari - it hangs and crashes. The calendar displays only birthdays, but on my macbook pro all right - shows and home and business calendar

  • Basic masking question

    In AE is it possible to mask one layer with the one above it (ala Illustrator)? I'm aware of the in-layer masking capabilities of AE. thanks, captain video