Process Code for Outbound Production Order??

Does anybody know the Process Code for Outbound Production Order??
BASIC Type : LOIPRO01
Message Type : LOIPRO
Regards,
Ravi

Hi Everybody.
There's no standard process code for LOIPRO Outbound Idocs.
This Idocs are threated as master data info, and could only be automatically generated by Data Distribution Model.
BD64.
Anyway, you can define your own Outbound Process Code in WE41 using CLOI_MASTERIDOC_CREATE_LOIPRO FM.
You can choose.
Regards.
Albert.

Similar Messages

  • Process code for 869(EDI ) Order Status Inquiry Message type.

    Hi Gurus,
                       Please can any one help in providing Process Code for 869 Order Status Inquiry Message type.
    Thanks,
    Sudhakar

    Hi Everybody.
    There's no standard process code for LOIPRO Outbound Idocs.
    This Idocs are threated as master data info, and could only be automatically generated by Data Distribution Model.
    BD64.
    Anyway, you can define your own Outbound Process Code in WE41 using CLOI_MASTERIDOC_CREATE_LOIPRO FM.
    You can choose.
    Regards.
    Albert.

  • Process code for Outbound IDOC type MBGMCR03

    Hi Friends,
    I have a requirement,  where in Goods receipt IDOC data from ECC 6.0 needs to be sent to the external system through XI, for that require a process code. Can you all suggest the process code for the outbound IDOC for Goods Receipt.
    Thanks in Advance,
    Meghna.

    Hi,
    Goods Movement is genarally inbound.
    You may have to write your own process code for MBGMCR03.
    Regards,
    Shakthi.

  • Process Code for Outbound Idoc

    Hi All,
    We need to find out the Process Code for an Idoc.
    Note : We dont have access to WE41, WE20 ,BD51.
    Could you please suggest any alternatives.
    Thanks,
    Sanjeet

    Hi Gautham,
    Thanks for ur reply.
    But still we hv not *** to the solution.
    We have available information as following:
    Basic Type : DESADV01
    Extension Type : EXTDES03
    Message type : DESADV
    Partner NUmber : XXXXXX
    Partner Type : KU
    I checked in Table TMSG1 and i got more than one similar process codes for the same message type.
    Actually I have the generated Idoc number and we are trying to reach to the FM which populates the Idoc segments.
    So if we get the process code, we can reach to FM.
    Thanks,
    Sanjeet

  • Why dont we need process code for outbound master idoc?

    For inbound master idoc we need a process code (EX. matmas03-MATM) but for <b>outbound master idoc</b> why dont we need process code?can anybody clarify me on that.
    thanx in advance....

    plz clarify me on that...its urgent...

  • Required Outbound Process Code for MessageType LOIPRO (Basic type-LOIPRO01)

    Hi EDI Gurus,
    I need to know the outbound Process Code for MessageType LOIPRO (Basic type-LOIPRO01).

    Hi,
    there is no process code for MessageType LOIPRO .
    check the below link u will get the clear idea.
    Re: Process Code for Outbound Production Order??
    Reward if helpful.
    Regards,
    Nagaraj

  • Process code for invoice

    Hi ,
    I need to know if there is any process code for outbound invoice idoc and inbound invoice idoc . Please let me know I know there is process code INVM for MM - invoice. Is this is the same as normal SD invoice ?
    Thank you

    Pls check this thread on inbound invoic processing...
    Re: Custom segments in INVOIC02
    Check the process codes - SD08 & SD09, for generating outbound invoic idocs.....
    Thanks,
    Renjith

  • Process Code in outbound IDOC

    Hi,
    We have created a process code for outbound IDOC and assigned an FM to it.In that FM, code is written to generate an IDOC(FM 'master_idoc_distribute').Please let us know how to trigger the outbound IDOC using the process code.Are there any FM or standard programs??
    Regards
    Prathima

    Hi Prathima,
    For outbond Idoc you have to define the output parameters for the corresponding Partner profile (transaction WE20). Look there that there is a tab called Messages control to specify and aplication, a message class and a process code. Is here where you have to add the process code.
    The application/message is responsible of select the data adapted for the FM linked to the process code.
    Reward points if helps.
    Roger

  • Specific process code for Production order message type LOIPRO

    Hello,
    Is there any specific process code for Production order message type LOIPRO.
    Request you to reply.
    Thanks
    Prashanth

    Hi Prashanth,
    sorry for last thread ... that not contain full information ...
    For message type LOIPRO you can use process code APLI.
    In IDOC PARTNER definition, the partner is linked with an IDOC TYPE and PROCESS CODE for inbound processing. This process code is in turn linked with a FUNCTION MODULE to process the IDoc such as IDOC_INPUT_INVOIC_MRM (Reff..  http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_cid519558,00.html)
    Regards,
    Amit

  • PROCESS CODE  FOR  PURCHASE ORDER

    Hi Friends,
        what is the process code for Purchase order...  because  i need to   creating a  partner profile in WE20 in the inbound side.. if iselect  message type   ORDERS menas.. that related.. process code( for purchase order is not  displaying)..
      can  any of you give me the <b>Message type </b> and that related <b>Process code</b> for <b> purchase order</b>..
    thanks
    Babu

    Hi Babu,
        You will find out the all Process Code from WE41 for Outbound & WE42 for Inbound.
    The Process code for ORDERS: Purchase order is ME10 for Outbound and you can find it out the message type for Inbound from WE42.
    If need more info let me know..
    Cheers
    Veera

  • What is outbound process code for quotation

    hi
    what is outbound process code for quotation

    Process code for outbound processing - Code which identifies the type of data which is to be sent via the IDoc interface.
    Use - Using the process code, the IDoc interface finds the application selection module which converts the SAP document into an IDoc.
    The process code is only used with applications which perform outbound processing via Message Control (NAST).
    Check with tcode WE41
    Process code SD12 - QUOTES: Quotation
    Regards,
    maha

  • LSMW for Open Production Order Creation

    Hi all,
    I want to migrate open production orders from legacy system to the other SAP system. Please let me know how should I do it?
    I tried using the idoc method with  Message type LOIPRO and the Basic Type LOIPRO01 but the it gives a error that No process code for message type LOIPRO. I guess this is a Outbound Idoc.
    Next I tried searching for a BAPI for prodcution orders. I found the BAPI,   BAPI_PRODORD_CREATE. But it does not contain all the fields I need. Also this BAPI cannot be used in LSMW as it ALE message type does not exist for it.
    So please let me know how can I use the idoc method to create the production order as I have all the fields required in the idoc basic type. Also please share if any other method is there to upload the data.
    Regards,
    Mozila

    We had to use BAPIs to upload the production orders.
    It was not possible with LSMW.

  • Inbound process code for LOIPRO

    Hi,
    Can anyone tell me the inbound process code used for LOIPRO(Production Order)message type?
    Regards,
    Jeyananth

    Hi,
    Inbound process code used for LOIPRO(Production Order)message type are
    ABI_AIDN_IN
    ED00
    ED00_XML
    ED08

  • Process Code for Message Type LOIPRO(in ALE/IDOCS)

    Hi all,
            I have to implement Production order Interface(create Production order,change Production order etc).The requirement is for eg:,I created one production order and posted it;it should get reflected in the recieving system.Does anyone know the process code for LOIPRO.I checked it in we42,WE64 and even the tables TEDE1 and TEDE2.But its not available.Process code and function module is necessary to continue with WE20.
    Thanking you in advance,
    anjaly

    Hi
    it may sound like not good news, but I think the answer is described in OSS Note 198252 - Special features of POI message category LOI*.
    There all LOI* idocs are mentioned and then they say:
    The message categories named are part of the POI (Production Optimization interface) interface.This interface and the message categories contained in it were developed for the transfer to non-R/3 systems.Therefore, an inbound processing in the R/3 system is not planned.The message categories are transferred via separate transactions / reports of the POI interface (Transactions POIM, POIT).Functions which exceed these transactions are not supported.For this reason, the above-mentioned ALE functions cannot be used for the message categories described.
    So, in short, there is no inbound process code for LOIPRO.
    Inbound processing then should be done through self-developed programs / idocs, calling BAPI-s (for example).
    Regards,
    Joe
    Edited by: Joseph Yasman on Jun 30, 2009 1:46 PM

  • What is the Process code for IDoc SISCSO01

    Hi all,
    I am using 4.6c version.
    I am going for an outbound IDoc SISCSO01 for sales Order confirmation.
    I want the process code (we41) which suits this IDoc SISCSO01.
    Can you please help to get the process code so that my IDoc can be sent succesfully.
    Best Regards,
    Gangolu

    Hi Gangolu,
    I don't think there is an outbound process code for IDoc type SISCSO01.
    But you can generate the IDoc with this FM <b>MCV_STATISTICS_ALE_OUT_ORDER</b>. But you still need to setup partner profile, distribution model and etc.
    Hope this will help.
    Regards,
    Ferry Lianto
    Please reward points if helpful.

Maybe you are looking for

  • Content Caching: Servlet.getLastModified()

    Hello everyone, I've been experimenting the past few days in the process of caching the contents of a servlet response, at the client side, and it was a very frustrating experience. After I was able to get a hold of all the mechanics of this process,

  • Need H

    I originally purchased y Zen V Plus MP3 Player from Dell, and so, I installed the CD fine, but then after that, I moved to the Dominican Republic and attempted to install the program, and it gives me a message about a missing driver, and it recommend

  • Material master loading in bi

    Hi, iam new to Material Master Extraction and loading, can some one tell the process about 0material_attr in sap bi from replication to reporting level what care should be taken.... appriciate your help. Kiran

  • Where do scripts go?

    What folder do the scripts go in, please? Can't find it anywhere. Wanting to use Bookends. Their instructions say there is a scripts menu on the right of the menu bar but I can't see it.

  • Looking for a nice book for RAC

    Please, Does someone advice me a nice and simple book to get started with RAC?(Real Appication Clustering ) on Oracle 10g? I'll be involved into a long and nice project, with RAC so I need to know more before going for training(if given by my boss) T