PROCESS CODE IN INBOUND SIDE(ALE-IDOCs)

HI,
     pls can you tell me procedure for creating PROCESS CODE IN
   standalone  method.

hi
create function module in se37
maintain charecterstics of that function module in tcode bd51
assign that function module to proceess code in using tcode we42
Reward for useful points
Regards
Nagesh.Paruchuri

Similar Messages

  • Process code for inbound credit Memo

    Hi All,
    May know what is the process code for inbound Credit Memo  (Return of Goods)
    Thanks,
    Matthew

    Hi Gautham,
    I checked the IDOC in BD87 tcode and it is saying "Function module not allowed: IDOC_INPUT_ORDRSP".
    I gave ORDR as the process code in the inbound parameters of the receiver system partner profile.
    In the sender system, I gave me10 as the process code. And there the status is 12, so everything is fine over there.
    Vishwa.

  • Process code for inbound idoc's

    hi  friend,
    i want to create a zprocess code for inbound idoc's pls i want to step or code.
    regrads and thanks

    Hi
    Are you using the customised idoc i:e message type .I hope most of the data transfer techniques always has a standard message type and if you are using one such than you can check in transaction we42(inbound process code) .All the steps have been rightly been mentioned for this querry of yours if you can clearly explain as to what message type are you using and for what purpose i can send you with documentation with steps to you.At the end of the day you will be posting idocs so that the data is being reflected in the segments .The things to be noted down is :-
    1.Maintain Partner Profile(we20) which is the sender system are you using ?
    2.If the satus is 53 it is sucess(green ) else 64(being processed-yellow) or 51(error-red)
    3.If you trigger by workflow than you have to use Message Variant .
                     If you are ok or incase do face any issues please do reply to the forum.
    Regards
    Somnath

  • Need elp to create the process code for inbound idoc !

    When I am creating a process code in WE42 and associating a
    function module then another screen comming while saving....but in that screen in the drop down list..i didnt find the function module....how to solve ?

    Hi,
    Use transaction BD51 to make the FM known as an inbound FM.
    Regards,
    John.

  • Custom process code and FM for custom IDoc...

    Hello Experts,
    I created a custom IDoc based from ARTMAS05 IDoc. This is because we only need 3 segments and
    the standard idoc(Artmas05) contains so many segments that we need.
    Now, will I create a custom process code and FM for this? how do I go about this?
    Thank you guys and take care!

    Hello,
                 Here are the Steps that we need to be following while creating a Custom Process Code with Custom Function Module. ( Since the Segments to be handled are very Less, I am recommending that you go for a Custom Function Module).
    1. Go to SE37 Create a Function Module. Please ensure to Create it with the IMPORT / EXPORT /TABLES parameters exactly in the way that they exist in any Standard SAP Inbound FM (Refer to IDOC_INPUT_ORDERS for example).
    2. Once our FM is Ready (Need not be Complete with the Code to go ahead with the Process Code Creation) and Active, the next Step is to Create an Entry in the Transaction Code BD51 where we will register the Function Module.
    3. Next, we'll have to go to T-Code WE57 where we'll have to make an entry for the Function Module with the IDoc Type & Message Type.
    4. Finally, go to WE42 and Create a New Process Code and assign the Function Module and the Message Type.
    NOTE 1 : The Process Code is, as we know, Client Dependent. So, once you create a Process Code, we need to have it migrated to the Testing Environment to Start & Carry Out Testing.
    NOTE 2: If Step 2 & 3 are missing, then we'll not be able to assign the Function Module in WE42 while Creating Process Code.
    Hope it was helpful.
    Thanks and Regards,
    Venkata Phani Prasad K

  • Processing code and Function Module  for IDOC

    hi forum,
    i m trying to make a file to IDOC scenario,
    the IDOC is being sent to a R/3 system,
    for the purpose, in R/3 i need to make a inbound processing code, can u tell me how to make a processing code and link it with a Function Module.......
    can u guide me....

    sudheer,
    If you are using standard idoc then you do not need to create new processing code.
    There would be standard processing code available. You need to set input partner profile with processing code.
    Let us know which idoc type you are using for inbound posting.
    Anyway..TC for Creating  processing code is : WE41(Outbound)  and WE42 (Inbound)
    Nilesh

  • "Could not determine code page" inbound side error

    Guys,
    We are receiving a flat text file and sending an IDoc, but now I'm getting this error.
    Any idea what's wrong?
    And what is that "I::000" in the message?
    Any help is much appreciated.
    Thanks a lot,
    Viktor
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30"
    xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
    SOAP:mustUnderstand="">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
      <SAP:P1>FM NLS_GET_LANGU_CP_TAB: Could not determine code page
    with TABWDV100 I::000 FM NLS_GET_LANGU_CP_TAB</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error: FM NLS_GET_LANGU_CP_TAB: Could not
    determine code page with TABWDV100 I::000
    FM LS_GET_LANGU_CP_TAB</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    PS:By the way, super sorry if this is a duplicate, my first post didn't show up,
    not sure what I messed up...

    Hi All,
    I have a similar problem, But with a small variation in the Log.
    <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="IDOC_ADAPTER"><b>ATTRIBUTE_IDOC_RUNTIME</b></SAP:Code>
      <SAP:P1>FM NLS_GET_LANGU_CP_TAB: Could not determine code page with PSRCLNT310 I::000 FM NLS_GET_LANGU_CP_TAB</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
    It says the "ATTRIBUTE_IDOC_RUNTIME", And I have checked all possible related threads and made my settings in synch. Did anyone had a similar problem?

  • Outboun IDoc Process Code

    Hi everyone,
    What is the purpose of Process code In Outbound IDoc
    I am Using Process code SD10 for outbound IDoc.
    and as per my Knowledge we use process code for Inbound IDoc only
    Please clarify my Doubts

    Hi,
    Process code is required in Outbound side also.when you save an application document , in your case i guess it is SALES order then you wish to send an IDOC to customer.
    So if you create partner profile for that customer and add SD10 as process code in message type then this process code will  be triggered,which is linked to FM IDOC_OUTPUT_ORDRSP behind the scene.This FM is responsible for generating IDOC's
    yes we need process code on inbound side also to trigger a process to read the incoming idoc and save the application data.
    Hope this helps!!
    harry
    Edited by: Harpreet Singh on Aug 29, 2008 12:35 PM

  • Message type, Idoc type and process code in ALE/Idoc

    Each Idoc version(creams01 or cremas03) will have seperate process codes in Inbound process?
    Whether Message type triggers the process code or the Idoctype/idoc  triggers the process code in Inbound process?
    regards
    Message was edited by: henry

    Hi Henry,
    About your question as how should you assign seperate process code for the same message type ( with different IDoc Type )-
    In We42, the message type can be assigned to the processing code. But here you will find that along with message type there are two more fields - Message Code & Message Function.
    You can use any one these to serve your purpose.
    e.g. you can assign
    -process code P1 to message type M with Message code 1
    -process code P2 to message type M with Message code 2
    Further these process types can be configured to call separate FMs.
    Now depending on IDOC types your external system should populate the message type as well as Message code so that accordingly process code will be determined at the time of inbound processing.
    I hope it's clear & correct
    Thanks,
    Ram

  • Idoc Process code- Inbound S.Order

    Hi!
        Could any one give me the process code for inbound processing sales order update.
      Looking for your Help.
      Thanks in Advance
      Rahul.

    Hi
    ORDC is for change sales order.
    I think u have asked for update sales order.
    can we take update as change sales order?
    Please let me know.
    Thanks

  • Idoc inbound processing - Combine process codes

    Hello,
    i have the following problem. I receive an idoc from system a) and i want to process the idoc in the HR system and afterwards I want to forward the idoc to System B).
    If i use HRMD as process code for in the partner profile on the HR system - the idoc which contains an user id is processed but not forwarded.
    If i use ED08 as process code instead of HRMD the Idoc is forwarded but not processed.
    But i need both - is there a possibility to combine two process codes although one is only a function module ant the other one is a workflow?
    It would be great if anyone can help me.
    Best regards
    Ariane

    Hi,
    a function module was created and that works out well as long as one idoc contains only one E1PLOGI segment.
    System A sends the Idocs due to change pointers. Is there a chance to do settings so that only one employee is distributed per idoc?
    Thanks a lot in advance

  • IDOC-Process Codes

    Hi Experts,
    When i'm triggerig the idoc its successfully sending the Idoc from the outbound but getting the status 51 in the inbound as : 
    The function module IDOC_INPUT_DEBITOR and the application object type KNA1 which were determined are not valid for this IDoc.
    I am not getting the soln for this issue can any of the experts plz try to resolve this issue.
    waiting for a early reply
    thnking you in advance
    Santosh

    Hi Santosh,
    Good .. Check out the following documentation
    Make sure you have configured the following
    Setting Up Clients 
    Defining Logical System Names for Clients
    Defining Communication Parameters
    Modeling the Distribution
    Generating Partner Profiles in the Sending System
    Distributing the Distribution Model
    Generating Partner Profiles in the Receiving System
    Creating Material Master Data
    Sending Material Master Data
    Checking Processing Status
    Follow the steps
    1 Logical System
    2 Assign Logical system
    3 RFC
    4 Port
    5 Customer distribution model
    6 Partner profile
    7 CDM distribution
    Tcode : SALE
    First 2 steps not necessary ( Basis work already done )
    Two logical system created
    Ls110 -Sender
    Ls800 - Receiver
    RFC
    RFC establishment SM59
    Receiving system IP address or hostname
    System number, client id
    Username, password
    Ports
    We21 – define ports
    TRFC – ale
    File – Edi
    CPI_C - R2 connections
    In the port we need to define Port name and RFC destinations
    And version
    Customer Distribution Model - BD64
    Sender
    Receiver
    Message type
    Partner profile we20 , BD62
    Partner may be customer, vendor, logical system
    In BD62 define the partner system (LS800)
    One more additional entry SYNC for synchronization
    Post processing Agent - workflow
    MATMAS 03 – 03 is the version
    Collect idoc we need to trigger
    Transfer idoc will be send immediately
    With message control
    Which program need to run for generating the idoc
    With out message control
    For some of the programs have inbuilt idoc generation for that case no need to mention program name
    Process code
    Distribute CDM
    Receiving System:
    Partner profile is going to control all the thing
    BD64 - > edit - > model view - > distribute
    BD67 – Function module assigned to the process code
    BD10 – used to create idoc for material
    Master idoc generated – only buffered
    One master idoc – multiple communication idoc
    One communication idoc generated
    We02 – idoc satus
    Check out the following link
    http://www.erpgenie.com/ale/
    Good Luck and thanks
    AK

  • ALE/Idoc (inbound & outbound)

    Hi,
    Can any one help me by providing simple sample code for creation of ALE/Idoc (inbound & outbound). Where I need do understand flow cycling of outbound from one client to other inbound client. Waiting for replay. My email-ID is [email protected]
    Regards,
    Lokesh.K

    Hi,
    have you seen these documentation sections?
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/78/2174b051ce11d189570000e829fbbd/frameset.htm">Implementing Inbound Processing</a>
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/78/2177bc51ce11d189570000e829fbbd/frameset.htm">Implementing Outbound Processing</a>
    Hope they'll help.

  • Hi gurus i am learning idocs  what is process code

    hi gurus i am learning idocs  what is process code.

    Hi
    Inbound Process Code
    Use
    The processing (workflow or application function module) which reads the IDoc data and generates the corresponding documents is found using the inbound process code.
    You must edit the inbound process codes in the following cases:
    ·        You want to use a new process and need a new process code for it
    ·        You want to assign different processing to process code X
    ·        You want to switch the ALE services on or off (this is only possible if the processing is a workflow). Switching off the ALE services can improve performance (lower memory requirement)
    Features
    The inbound process codes are application-specific. IDoc Basis includes the process code ED08, which forwards inbound IDocs to distributed SAP Systems (“Forward inbound” function). This processing is defined by the workflow WS30000483.
    Activities
    ·         Determine the required process code from the corresponding partner profiles or by choosing SAP Menu ® Tools ® IDoc/ALE ®  Services ® Documentation ® Process Code (WE64).
    ·         Sie wählen SAP Menü ® Werkzeuge ® ® IDoc/ALE ® Entwicklung ® IDoc -> Eingangsverarbeitung ® Vorgangscode pflegen (WE42).
              To change an assignment or to make a new entry, choose .
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/78/2176ab51ce11d189570000e829fbbd/content.htm

  • Process code & Inbound FM for DEBMDM06 (Cutomer masster + Addresses)

    Hi All,
    Can any one tell me the Process code and Inbound function module for the IDOC DEBMDM06.
    Thanks in advance
    NK

    Hi Michael,
    Thaks for your quick responce. Message type for the IDOC DEBMDM06 is DEBMDM. But i did not find any process code for the the message type DEBMDM.
    There are two process codeds DEB2 and DEBM for the meeage type DEBMAS for the IDOC DEBMAS06 not for the DEBMDM06.
    I'm trying to use the process code DEB2 and DEBM for the IDOC DEBMDM06 but not working.
    Please let me know if you know any solution.
    Thank you
    NK

Maybe you are looking for