Process Code in outbound IDOC

Hi,
We have created a process code for outbound IDOC and assigned an FM to it.In that FM, code is written to generate an IDOC(FM 'master_idoc_distribute').Please let us know how to trigger the outbound IDOC using the process code.Are there any FM or standard programs??
Regards
Prathima

Hi Prathima,
For outbond Idoc you have to define the output parameters for the corresponding Partner profile (transaction WE20). Look there that there is a tab called Messages control to specify and aplication, a message class and a process code. Is here where you have to add the process code.
The application/message is responsible of select the data adapted for the FM linked to the process code.
Reward points if helps.
Roger

Similar Messages

Process Code for Outbound Idoc

Hi All,
We need to find out the Process Code for an Idoc.
Note : We dont have access to WE41, WE20 ,BD51.
Could you please suggest any alternatives.
Thanks,
Sanjeet

Hi Gautham,
Thanks for ur reply.
But still we hv not *** to the solution.
We have available information as following:
Basic Type : DESADV01
Extension Type : EXTDES03
Message type : DESADV
Partner NUmber : XXXXXX
Partner Type : KU
I checked in Table TMSG1 and i got more than one similar process codes for the same message type.
Actually I have the generated Idoc number and we are trying to reach to the FM which populates the Idoc segments.
So if we get the process code, we can reach to FM.
Thanks,
Sanjeet

Process code for Outbound IDOC type MBGMCR03

Hi Friends,
I have a requirement, where in Goods receipt IDOC data from ECC 6.0 needs to be sent to the external system through XI, for that require a process code. Can you all suggest the process code for the outbound IDOC for Goods Receipt.
Thanks in Advance,
Meghna.

Hi,
Goods Movement is genarally inbound.
You may have to write your own process code for MBGMCR03.
Regards,
Shakthi.

Process Code for Outbound Production Order??

Does anybody know the Process Code for Outbound Production Order??
BASIC Type : LOIPRO01
Message Type : LOIPRO
Regards,
Ravi

Hi Everybody.
There's no standard process code for LOIPRO Outbound Idocs.
This Idocs are threated as master data info, and could only be automatically generated by Data Distribution Model.
BD64.
Anyway, you can define your own Outbound Process Code in WE41 using CLOI_MASTERIDOC_CREATE_LOIPRO FM.
You can choose.
Regards.
Albert.

How to know the process code of an IDOC

Hi All,
If I want to know the process code of a standard SAP IDOC, how do I do it. Is it we42 or any table/transaction, which can show me all the possible process codes for an IDOC.
I need to know this so that I can use this accordingly in my partner profile. ( I do not have any idoc in mind, but its avery general question. How do I know what process code belongs to which IDOC)
Many thanks

Hi,
U can check using We41 and We42 tcode for both inbound and outbound case. For each process code a function module is attached check the same for required functionality.
WE60 and WE64 transaction.will list the std IDOC in SAP.
chirag

What is a process code in ale idoc

what is a process code in ale idoc,what is the purpose of Process code.

Hi,
     Let me tell some scenario then u would be able to understand what a process code is-------
In ALE ie, the data requested system is receiver and the data already presented system is sender ie, from where we are having the data,
here in sender side----
       we need a program to tranfer required data into idoc--( idoc is just a data container )    in sender side this program logic is in a function module it is configured in we41.
         ie this will transfer the data from database to idoc----in sender side it is a process code
and in receiver side after receiving the data we have to post it in database again program needed it is also ie the required code is also in function module it is configured in we42
it is about receiver side f.m or simply process code
okkkkkkkkkkkk

Why dont we need process code for outbound master idoc?

For inbound master idoc we need a process code (EX. matmas03-MATM) but for <b>outbound master idoc</b> why dont we need process code?can anybody clarify me on that.
thanx in advance....

plz clarify me on that...its urgent...

Process code for extended idoc

Hi,
If we are creating an extended idoc, do we have to assign a new process code to it ?
Or will the process code and the associated function module for the basic type work as well for the extended idoc ?

Process code will come in to picture when you deal with IDOCS .. you need to assign a code which internally will have a Function module or a Include, that will have entire code to run your bussiness for an IDOC or EDI or ALE.
Process Code is a different name for specific purposes like function module. IDocs are written in this process.
Outbound Process Code - if you are using outbound processing under Message Control, the IDoc is generated in the IDoc Interface. The process code names the relevant function module
Inbound Process Code - names the function module or workflow which reads the IDoc data and transfers the data to the application document.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b7d6243d711d1893e0000e8323c4f/content.htm
Enter transaction WE30 (ALE->Extension-> IDOC types->Maintain Idoc type)
Type in your name of the extended IDOC type (usually starting with 'Z') and click on the Basic IDoc type, click the create icon.
Click on Create new and enter a description and press enter.
Click on ZIDOCTYPE01 and then on the Create icon.
Enter ZIDOCTYPE as the segment type, click on Segment Editor.
Enter a description for your segment type and create.
Enter a description for your segment, enter each field required in your IDoc and press enter to validate.
Save and generate, press back
To release the segment choose Goto, Release from the menu.
Check the box on the line of your segment.
Save, back and enter.
Your Idoc type structure should be displayed with your new segment.
Save and back.
To release the Idoc type choose Extras, Release type from the menu and Yes.
Reward points if useful.

Message type, Idoc type and process code in ALE/Idoc

Each Idoc version(creams01 or cremas03) will have seperate process codes in Inbound process?
Whether Message type triggers the process code or the Idoctype/idoc triggers the process code in Inbound process?
regards
Message was edited by: henry

Hi Henry,
About your question as how should you assign seperate process code for the same message type ( with different IDoc Type )-
In We42, the message type can be assigned to the processing code. But here you will find that along with message type there are two more fields - Message Code & Message Function.
You can use any one these to serve your purpose.
e.g. you can assign
-process code P1 to message type M with Message code 1
-process code P2 to message type M with Message code 2
Further these process types can be configured to call separate FMs.
Now depending on IDOC types your external system should populate the message type as well as Message code so that accordingly process code will be determined at the time of inbound processing.
I hope it's clear & correct
Thanks,
Ram

Process code for inbound idoc's

hi friend,
i want to create a zprocess code for inbound idoc's pls i want to step or code.
regrads and thanks

Hi
Are you using the customised idoc i:e message type .I hope most of the data transfer techniques always has a standard message type and if you are using one such than you can check in transaction we42(inbound process code) .All the steps have been rightly been mentioned for this querry of yours if you can clearly explain as to what message type are you using and for what purpose i can send you with documentation with steps to you.At the end of the day you will be posting idocs so that the data is being reflected in the segments .The things to be noted down is :-
1.Maintain Partner Profile(we20) which is the sender system are you using ?
2.If the satus is 53 it is sucess(green ) else 64(being processed-yellow) or 51(error-red)
3.If you trigger by workflow than you have to use Message Variant .
If you are ok or incase do face any issues please do reply to the forum.
Regards
Somnath

Message type and Process Code for 940 IDoc

Hi,
what Message type and Process Code can be used for 940 IDoc when a SHPMNT05 IDoc is being used. We are using SHPADV message, SHPM process code for ASN. Can I use the SHPMNT message type for 940?
thanks,
Kumar.

should SD11 be the only process code to be used or can we use SHPM. I guess we can use both for shpmnt05. But how do I know which process code is more suitable for my purpose. is there any place where i can check that info?
Can we link SHPORD message type to a SHPMNT05 IDoc? i think this message type is more suitable.
thanks,
Kumar.

Problem for Process code creation in IDOCS

Hi Experts,
I have copied function module 'IDOC_INPUT_ORDERS' into 'Z_IDOC_INPUT_ORDERS'.I have done some extension idoc population in this.My problem is I want to assign this 'Z_IDOC_INPUT_ORDERS' FUNCTION MODULE to one new process code.While creating new process code i have to assign this Z FM there.But There is one drop down list is showing under function module field.I need to select this Z FM from this dropdown list.But it's not showing in this drop down list.What can i do for this .
Can he give needful support regarding this.It's very urgent requirement
Appreciable for ur good help.
with rgds,
srihari.V.

Hi,
You need to add your FM in transaction code BD51 and go to transaction WE57 to assign to the corresponding message type. Next, you go to transaction WE42. The FM should be visible.
Regards,
Ferry Lianto

Need elp to create the process code for inbound idoc !

When I am creating a process code in WE42 and associating a
function module then another screen comming while saving....but in that screen in the drop down list..i didnt find the function module....how to solve ?

Hi,
Use transaction BD51 to make the FM known as an inbound FM.
Regards,
John.

Outboun IDoc Process Code

Hi everyone,
What is the purpose of Process code In Outbound IDoc
I am Using Process code SD10 for outbound IDoc.
and as per my Knowledge we use process code for Inbound IDoc only
Please clarify my Doubts

Hi,
Process code is required in Outbound side also.when you save an application document , in your case i guess it is SALES order then you wish to send an IDOC to customer.
So if you create partner profile for that customer and add SD10 as process code in message type then this process code will be triggered,which is linked to FM IDOC_OUTPUT_ORDRSP behind the scene.This FM is responsible for generating IDOC's
yes we need process code on inbound side also to trigger a process to read the incoming idoc and save the application data.
Hope this helps!!
harry
Edited by: Harpreet Singh on Aug 29, 2008 12:35 PM

Automated error email notification when outbound IDOC fails

Hi,
The requirement is that whenever the outbound IDOC of message type PAYEXT, basic type PEXR2002, fails, then email has to be trigerred to a group id.
I had suggested to write a report program that runs as a job. If the IDOC goes to error status then mail will be sent from this report. Client prefers it to be done through workflow.
There is a standard process code for outbound IDOC failure handling EDIO (we40). standard task 7989 has been assigned to this process code. I dont want to modify this standard task as I am not sure of impact.
Terminating event for this task is 'ERRORPROCESSCOMPLETD'.
I have developed the workflow that has trigerring event 'ERRORPROCESSCOMPLETD' and bound with the IDOC number. This will send mail to the group id with the IDOC details
Now issue is that, I am not sure if standard process EDIO will be trigerred automatically, or should we configure anywhere. Since this is standard outbound IDOC, I am not able to add the process code in partner profile.
Please give your inputs or any other alternate solution to send mail through workflow when outbound IDOC fails.
Thanks in advance.

Hi,
I guess in your outbound partner profile for PAYEXT. you need to add process code EDIO in message control TAb. WHich will cause to trigger the workflow which will send the notification.

Process Code in outbound IDOC

Similar Messages

Maybe you are looking for