Process code & Inbound FM for DEBMDM06 (Cutomer masster + Addresses)

Hi All,
Can any one tell me the Process code and Inbound function module for the IDOC DEBMDM06.
Thanks in advance
NK

Hi Michael,
Thaks for your quick responce. Message type for the IDOC DEBMDM06 is DEBMDM. But i did not find any process code for the the message type DEBMDM.
There are two process codeds DEB2 and DEBM for the meeage type DEBMAS for the IDOC DEBMAS06 not for the DEBMDM06.
I'm trying to use the process code DEB2 and DEBM for the IDOC DEBMDM06 but not working.
Please let me know if you know any solution.
Thank you
NK

Similar Messages

Custom process code and FM for custom IDoc...

Hello Experts,
I created a custom IDoc based from ARTMAS05 IDoc. This is because we only need 3 segments and
the standard idoc(Artmas05) contains so many segments that we need.
Now, will I create a custom process code and FM for this? how do I go about this?
Thank you guys and take care!

Hello,
Here are the Steps that we need to be following while creating a Custom Process Code with Custom Function Module. ( Since the Segments to be handled are very Less, I am recommending that you go for a Custom Function Module).
1. Go to SE37 Create a Function Module. Please ensure to Create it with the IMPORT / EXPORT /TABLES parameters exactly in the way that they exist in any Standard SAP Inbound FM (Refer to IDOC_INPUT_ORDERS for example).
2. Once our FM is Ready (Need not be Complete with the Code to go ahead with the Process Code Creation) and Active, the next Step is to Create an Entry in the Transaction Code BD51 where we will register the Function Module.
3. Next, we'll have to go to T-Code WE57 where we'll have to make an entry for the Function Module with the IDoc Type & Message Type.
4. Finally, go to WE42 and Create a New Process Code and assign the Function Module and the Message Type.
NOTE 1 : The Process Code is, as we know, Client Dependent. So, once you create a Process Code, we need to have it migrated to the Testing Environment to Start & Carry Out Testing.
NOTE 2: If Step 2 & 3 are missing, then we'll not be able to assign the Function Module in WE42 while Creating Process Code.
Hope it was helpful.
Thanks and Regards,
Venkata Phani Prasad K

Idoc Process code- Inbound S.Order

Hi!
Could any one give me the process code for inbound processing sales order update.
Looking for your Help.
Thanks in Advance
Rahul.

Hi
ORDC is for change sales order.
I think u have asked for update sales order.
can we take update as change sales order?
Please let me know.
Thanks

Process code or Fmodule for Idoc type PREQCR101 and message type PREQCR1

hi all,
Iam unable to find the process code or function module for the idoc type PREQCR101 and message type PREQCR1 for inbound process.
help from some one would be a lot appretiated.

Hi,
Go to transaction WE57 and you can find the processing FM and message type that are associcated to the IDOC type.
For process code if it is Inbound check WE42 and outbound check WE41 transactions
Regards
Shiva

What Message type and Process Code to use for Purchase Order Change in 4.6C

I like to implement in SAP R/3 4.6C a scenario for Purchase Order Change, via inbound IDoc.
I have been searching, but could not find what Message Type, Idoc Basic Type and Process Code to use.
I can not imagine this functionality does not exist in 4.6C.
Any suggestions for my problem are welcome.

Hello,
In this case you should use the message PORDCH and BAPI method BAPI_PO_CHANGE but only exist as of release 4.7.
Function module    BAPI_IDOC_INPUT1
Idoc Type              PORDCH01
Message Type      PORDCH
So check carefully the following OSS notes:
[Notes 589066 - BAPI_PO_CHANGE: Incorrect account assignment to network |https://service.sap.com/sap/support/notes/589066] (not be fooled by the description)
[ Notes 197958 - BAPIs for purchase orders - Missing Functions|https://service.sap.com/sap/support/notes/197958]
Regards,
Andrea
Edited by: Andrea Olivieri on Sep 3, 2009 10:17 AM

PROCESS CODE FOR PURCHASE ORDER

Hi Friends,
what is the process code for Purchase order... because i need to creating a partner profile in WE20 in the inbound side.. if iselect message type ORDERS menas.. that related.. process code( for purchase order is not displaying)..
can any of you give me the Message type and that related Process code for purchase order..
thanks
Babu

Hi Babu,
You will find out the all Process Code from WE41 for Outbound & WE42 for Inbound.
The Process code for ORDERS: Purchase order is ME10 for Outbound and you can find it out the message type for Inbound from WE42.
If need more info let me know..
Cheers
Veera

Process code for invoice

Hi ,
I need to know if there is any process code for outbound invoice idoc and inbound invoice idoc . Please let me know I know there is process code INVM for MM - invoice. Is this is the same as normal SD invoice ?
Thank you

Pls check this thread on inbound invoic processing...
Re: Custom segments in INVOIC02
Check the process codes - SD08 & SD09, for generating outbound invoic idocs.....
Thanks,
Renjith

Idoc type, message type and process code for EDI 940 & 945

Hi,
We are implementing a scenario wherein we are required to send a Wharehouse Shipping Order to the warehouse (forwarding agent) using EDI 940. The output of the o/b is triggered from the Delivery (VA01) after creation of a Delivery in SAP. Once the warehouse ships the goods, it notifies us back by sending EDI 945 (Warehouse Shipping Advice). Using this inbound 945 we are required to update the existing delivery in SAP, i.e., it should do the Pick, Pack and PGI.
Can someone tell me which Idoc type, Message Type and Process code should be used for the above scenario.
Thanks in advance for the help.
Regards,
Gajendra

Hi Gajendra,
For EDI940, you can use message type SHPORD or WHSORD, IDOC type DELVRY01 and process code DELV.
For EDI945, you can use message type SHPCON or WHSCON, IDoc type DELVRY01 and process code DELV.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

Problem in ALE inbound With process code

i want to give a function module to the in bound process code in transaction WE42 but i am not able to give the function module name .after giving the function module name if i say save system giving message "The ALE table is not yet maintained for process code ZTEST".

Hi,
This are the steps which involoves the Idoc processing .
For ur query, check the bold letters .. do that part . it will solve ur problem
Create Idoc type Transaction WE30.
Idoc type Idoc segments
Z_idoc
Create Message Type Transaction WE81.
Message type
z_msg
Assign Message Type to Idoc type Transaction WE82.
Idoc type Message type
z_idoc z_msg
Create a function module through SE37
z_idoc_input
Assign characteristic of function module BD51
Assign fn module to Idoc type and Message Type WE57
Idoc type Message type Fn Module
z_idoc z_msg z_idoc_input
Create Inbound process code and assign inbound function module Transaction WE42.
Process code Inbound function module
zcode z_idoc_input
Create a distribution Model - Transaction BD64
Create distribution model for distribution of messages
with the message type of z_msg
Update inbound parameters of the Partner profile Transaction WE20
For the Logical system A for the above message type update the partner profile
inbound parameter and specify the process code of zcode.
For Outbound ALE Configurations: (Example)
IDoc definitions and necessary ALE configurations settings for the outbound .
Create Idoc segments Transaction WE31.
Create Idoc type Transaction WE30.
Create Message Type Transaction WE81.
Assign Message Type to Idoc type Transaction WE82.
Create a distribution Model - Transaction BD64.
Reward points if it is Useful.
Thanks,
Manjunath MS

IDOC: LOIPRO, inbound Process Code?

Hello everyone,
I'm trying to create a Production Order using IDOC: LOIPRO. I'm in the process of configuring the Partner Profile and I need to define the inbound Process Code for message type: LOIPRO. Does anyone know which Process Code to use for that message type?
Warm regards,
Glenn

Hi Glenn,
Message Type: LOIPRO
Receiver Port: The one created in step u201CDefining a Logical Portu201D
Basic Type: LOIPRO01
if want to more about it pls do chk this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/201769e0-3174-2910-e287-baa58d198246
if found wort pls do te req
Thanx
Sampath

ALE INBOUND Process Code

Hi,
In ALE INBOUND Process Code Apart from the Function Module name, what are the important things to be filled up while creating that InBound process code in WE42. What is the importance of those? what is the importance of Object Attributes in that?

Hi Mahesh check this may be useful to you
The inbound function module needs to be linked to the message type and the message type needs to be linked to the appropriate inbound process code at the partner profile level before the scenario is enabled. These steps are described below in detail.
Link Message Type to Function Module (WE57) Client independent
u2022 Enter transaction WE57 (ALE -> Extensions -> Inbound -> Allocate function module to logical message)
Define FM settings (BD51) Client independent
u2022 Enter transaction BD51 (ALE -> Extensions -> Inbound -> Define settings for input modules)
u2022 Click on New entries
u2022 Enter 0 for mass processing in the output column
u2022
Maintain process codes (WE42) Client dependent
A process code needs to be maintained on each client. It then needs to be linked to the message via the partner profiles on each client. This allows the various clients to use a unique function module for the same message type.
To maintain the process code follow these steps:
u2022 Log on to the appropriate receiving system client
u2022 Execute WE42 (ALE -> Extensions -> Inbound -> Maintaining process codes inbound)
u2022 Choose Inbound with ALE service
u2022 Choose Processing with function module
u2022 Click on Processing with function module and choose create icon
u2022 Click on New Entries
u2022 Type in process code XXXXXXX and give it a description and save
u2022 Now you are asked to Please maintain codes added in ALE entry methods, enter and choose XXXXXX and copy it. You should choose a FM similar to your one.
u2022 Enter your process code XXXX
u2022 Enter your function module XXXXXX
NOTE: The next 6 steps are used in workflow error handling.
u2022 Enter IDPKFIDCMT in object type
u2022 Enter MASSINPUTFINISHED in End event
u2022 Enter IDOCINVOIC in IDoc object type
u2022 Enter INPUTERROROCCURREDFI in IDoc start event
u2022 Enter INPUTFINISHEDFI in IDoc End event
u2022 Enter IDOCINVOIC in Application object type
You will need to determine the task associated with object XXXXXXXX, and then assign the appropriate position to it. This position will then receive the application error messages via workflow.
To set up the workflow area please consult the Workflow config guide.
Create inbound partner profile
For each message type you need to maintain the inbound partner profiles.
Maintain receiving system partner profile (WE20) Client dependent
To maintain inbound partner profiles read the document ALE configuration procedure:
u2022 Add the message type XXXXX with process code XXXX.
u2022 Enter the output mode (background, immediately) for inbound processing and NO message code.
Test
Once the inbound function module has been debugged the scenario should be ready to test in its entirety. If problems occur, read through the relevant areas of this document to check your configuration or code.
You can find all the inbound and outbound processcodes in we64.
Regards,
SMS.

Question regarding Inbound process codes

When I look into WE64 (inbound process codes), I can see that some messages have only the following process codes:
- ABI_AIDN_IN
- ED00
- ED00_XML
- ED08
Can someone please tell me exactly what each of these process codes does? I can find very little information (and none of it helpful) about these process codes.
<REMOVED BY MODERATOR>
Thanks
Terri
Message was edited by:
Alvaro Tejada Galindo

Anji - thanks for your reply.
I've looked in WE42, and can see the entries. This still does not give me any additional information about how these process codes work. For example, I know that TXT1 is a process code tied to a workflow task that will process a TXTRAW01/02 idoc. The TXT1 process code is tied only to that IDOC. However, the process codes listed in my original message are tied to all inbound idocs.
Hence my original question, what exactly do these process codes do?
Thanks,
Terri

IDOCs - create new inbound process code Error

Hi
Regarding Zprocess Code in WE42..
Que-1
I have already mainted in BD51 . then
In we42 , When I provide the Zprocess Code and Enter , the following mesages/information I am getting-
-> The ALE table is not yet maintained for process code ZPUR !
-> For entry, access 'Function module for ALE-EDI inbound processing'
Ques-2
When I was proving OBJECT TYPE : blank , I was getting the error as " APPLICATION OBJECT TYPE is not planned ".
Does it means to maintain anywhere..?
Please help in this regard.
Thanks
Kalpesh

Hi KALPESH,
check the below things and try..
Process code <give ur zprocess code>
Description test
Identification <give ur functionmodule>
Option ALE
click on radio button Processing with ALE service
processing type
click on radio button Processing by function module
Now press enter button,now u will get transport request,create the transport request nad then u will get the information message
'Function module for ALE-EDI inbound processing'.Now press enter ,
u will get a new screen..now from the drop down list select ur zfucnction module..
give the application object and press on save button..
now ur zprocess code will be created.
HOPE THIS HELPS

Process code's function module required for the IDOC Message type PROACT

Hi,
I am trying to trigger an IDOC from ME32K transaction which will carry my Contract agreement details to XI. The IDOC I am using for this purpose is PROACT.PROACT01. But I couldn't find the outbound process code / Function module for the process code associated to this IDOC message type.
Pls help me out....
Thanks,
Ram Kalyan

I checked table EDIFCT for the message type and found this:
Function module Function type Basic type Message Type
IDOC_INPUT_PROACT F PROACT01 PROACT
Oops...I think you are looking for outbound..Ignore

Purpose of Process code

Hi what is purpose of Process Code
I know there we add Msg type and Function module what is its function that function module will helps in getting the data
and *what abt Msg type* and Process code there

Hi,
R/3 uses the method of logical process codes to detach the IDoc processing and the processing function module. They assign a logical name to the function instead of specifying the physical function name.
Logical pointer to a processing method
The IDoc functions are often used for a series of message type/IDoc type combination. It is necessary to replace the processing function by a different one. E.g. when you make a copy of a standard function to avoid modifying the standard.
Easily replacing the processing method
The combination message type/IDoc will determine the logical processing code, which itself points to a function. If the function changes, only the definition of the processing codes will be changed and the new function will be immediately effective for all IDocs associated with the process code.
For inbound processing codes you have to specify the method to use for the determination of the inbound function.
After defining the processing code you have to assign it to one or several logical message types. This declaration is used to validate, if a message can be handled by the receiving system.
The inbound processing code is assigned analogously. The processing code is a pointer to a function module which can handle the inbound request for the specified IDoc and message type.
The definition of the processing code is identifying the handler routine and assigning a serious of processing options.
Processing with ALE
You need to click "Processing with ALE", if your function can be used via the ALE engine. This is the option you would usually choose. It allows processing via the ALE scenarios.
Associate a function module with a process code
Table TBD51 to define if visible BTCI is allowed
For inbound processing you need to indicate whether the function will be capable of dialog processing. This is meant for those functions which process the inbound data via call transaction. Those functions can be replayed in visible batch input mode to check why the processing might have failed.
WE41 Process code outbound creation
WE42 Process code inbound
Regds
Sivaparvathi
Please reward points if helpful............

Process code & Inbound FM for DEBMDM06 (Cutomer masster + Addresses)

Similar Messages

Maybe you are looking for