Process codes for Idoc types

Hi All,
Can you please send me the process codes for the following IDOC types as I could not find them in WE64. Also let me know how did you found out.
IDOC types are:
1) INTERNAL_ORDER_CREATE01
2) PROFITCENTER_CREATE01
3) COSTCENTERGROUP_CREATE01
Urgent help is really appreciated.
Regards,
Shahu

Hi,
1) INTERNAL_ORDER_CREATE01
           Please clarify for which order you are using this.
2) PROFITCENTER_CREATE01 -
           PRCM (PRCMAS)
3) COSTCENTERGROUP_CREATE01
           COSM (COSMAS)
Reward points if useful.
Regards,
Atish

Similar Messages

What is the Process code for IDoc SISCSO01

Hi all,
I am using 4.6c version.
I am going for an outbound IDoc SISCSO01 for sales Order confirmation.
I want the process code (we41) which suits this IDoc SISCSO01.
Can you please help to get the process code so that my IDoc can be sent succesfully.
Best Regards,
Gangolu

Hi Gangolu,
I don't think there is an outbound process code for IDoc type SISCSO01.
But you can generate the IDoc with this FM MCV_STATISTICS_ALE_OUT_ORDER. But you still need to setup partner profile, distribution model and etc.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

Process code for IDOC Output from MIRO

Hi,
We need to find the Process code for IDOC output to assign Output type in ECC. We need the IDOC output to some other system like PR while doing the invoice Posting (Transaction code MIRO). We tried Using process code SD09 for the IDOC with IDOC Type INVOIC02. In SD09 we are getting error (Update terminated) when we trigger the output while saving in MIRO transaction.
Further we understand that process code SD09 is used for SD billing and Invoice process.
We need your help in
1. getting the correct process code for the IDOC generation for Invoice posting thru MIRO.
2. If we need to configure one process code, let me know the correct function module for the same.
Please Note, we need this as Output Idoc from Invoice Posting MM (MIRO).

Hi Shankar,
Thanks for quick for reply. We have tested this process code with IDoc type - GSVERF03 and message type - GSVERF. It worked for us for MIRO transaction.
we are testing with IDoc type INVOIC02.
once again thanks for sharing the process code.
Regards,
Brahma

What is the process code for message type FIXEDASSET_CREATE?

Hi all
please tell me that what is the process code for
MESSGAE TYPE = FIXEDASSEt_CREATE,
FUNCTION MODULE = IDOC_INPUT_FIXEDASSET_CREATE,
BASIC TYPE = FIXEDASSET_CREATE01 ?
thanx in advance.......
Edited by: Prachi Sharma on Jan 11, 2008 7:45 AM
Edited by: Prachi Sharma on Jan 11, 2008 8:03 AM

Hi,
Check the Tcodes WE41 and WE42 for Outbound and Inbound process codes
Check below Tables as well
EDE1T
EDE2T
EDE5T
EDE6T
TEDE5
TEDE6
Regards,
Satish

Process Code for Message Type LOIPRO(in ALE/IDOCS)

Hi all,
I have to implement Production order Interface(create Production order,change Production order etc).The requirement is for eg:,I created one production order and posted it;it should get reflected in the recieving system.Does anyone know the process code for LOIPRO.I checked it in we42,WE64 and even the tables TEDE1 and TEDE2.But its not available.Process code and function module is necessary to continue with WE20.
Thanking you in advance,
anjaly

Hi
it may sound like not good news, but I think the answer is described in OSS Note 198252 - Special features of POI message category LOI*.
There all LOI* idocs are mentioned and then they say:
The message categories named are part of the POI (Production Optimization interface) interface.This interface and the message categories contained in it were developed for the transfer to non-R/3 systems.Therefore, an inbound processing in the R/3 system is not planned.The message categories are transferred via separate transactions / reports of the POI interface (Transactions POIM, POIT).Functions which exceed these transactions are not supported.For this reason, the above-mentioned ALE functions cannot be used for the message categories described.
So, in short, there is no inbound process code for LOIPRO.
Inbound processing then should be done through self-developed programs / idocs, calling BAPI-s (for example).
Regards,
Joe
Edited by: Joseph Yasman on Jun 30, 2009 1:46 PM

Process code for Idoc BANK_CREATE01 and BANK_CHANGE01

hi,
I want to create partner profile for Idoc BANK_CREATE01 and BANK_CHANGE01 standard Idocs.
But in transaction we64 , i am not finding the inbound process code for it.
So di i have to create a process code for it??
If yes , how do i create it and also the function module to be created.
kindly help.
Regards,
Loveena

hi ,
To create a partner profile Tcode WE20.
for your inbound or outbound idocs , just add these idocs in outbound or inbound parameters . For Idoc to File or File to Idoc , it is sufficient.
before creating partner profile you have to create port Tcode WE21
hope this will help
regards
HONEY

What is the process code for Message type FUNDMA

Hi,
I am sending CO elements to the distributed server using ALE. Can somebody tell me what is the process code for the message type FUNDMA?
Thanks
William

Check entries of table VEDI_TMSG1. This contains Message types and associated Process codes.
Hope this helps.
ashish

Process codes for message types IORDER and INOTIF

Hi All,
I need to know the process code for above message types.
I could not get specific process code in WE64.
Regards,
Shahu

Hi,
Try searching in WE42.
This is what i found we64 (same for both message types):
ABI_AIDN_IN
ED00
ED00_XML
ED08
Good luck! Reward if helpful.
Message was edited by:
John Damion

Process code for IDoc

Hi,
I have a function module which is assigned to a Process Code. How can i find the Process code for this Function Module?..Pls help
Ram

Hi Prabha,
If it is Outbound Process Code use WE41.
If it is Inbound Process Code use WE42.
Regards,
Raghav

Creation of Process code for output type

Hi,
Could someone help me out in defining processcodes for output types.
Thanks in advance,
Yaseen

Hi Yaseen,
The Tr.code WE41 and WE42 are also used for maintaining process codes.
To maintain process codes in WE41 or WE42, Go to these Tr.Codes and Click on the Change button. Then click on "new entries" button to create your new process code.
FYI, Outbound process codes are stored in SAP Table TEDE1 and inbound process codes are stored in SAP Table TEDE2.
Hope this helps.
Rgds,
Sam Raju
Message was edited by: Sam Raju

How to create process code for idoc bank_create01 in testing client

hi,
I am using Idoc BANK_CREATE01 and BANK_CHANGE01 to post idoc to R/3 in inbound side.
there is no standard process code available for this idoc
But there is a function module idoc_input_bank_create which posts data to r/3 from the idoc.
So i created a zprocess code and attached this function module to it.
But all this i have done in the development client , but it is not being reflected in the testing client
And i am not able to create Process code in we42 in testing client since it is not modifiable.
So , is transaction we42 client 42??
Or is there any way that whatver i create in dev client should also reflect in testing client
Please help
Regards,
Loveena

Hi,
While Creating the process code u have to save under transport ID under which id u have stored it,transfer that id into QA system then u can test ur IDOC.
If u have created it under local object then u have to agin store into one tranport id and then transfer it.
Regards,
Phani
Reward points if Helpful

PO invoice through IDOC --Need Standard Process code and Message Type

Hi All,
could any one send me SAP Standard Message type and SAP Standard process code for posting Vendor PO invoice.
Thanks
Raghu

Hello,
Standard Message type: INVOIC, Process Code: INVL, IDOC type INVOIC02.
Thanks,
Venu

STD Process code for PR

Hi...Is there an SAp std process code that uses the FM - IDOC_INPUT_PREQCR
PR creation
regards,
Arvind R

Hi Shankar,
Thanks for quick for reply. We have tested this process code with IDoc type - GSVERF03 and message type - GSVERF. It worked for us for MIRO transaction.
we are testing with IDoc type INVOIC02.
once again thanks for sharing the process code.
Regards,
Brahma

Information for IDOC type TPSDLS01

Hi,
I want to create an IDOC for IDOC type TPSDLS01. The message type for this IDOC is TPSDLS. I need following information, since i am working for last two days and i am unable to figure it out. pls. it is urgent
1). Application , i found it is V2 ( shipping) is it correct?????/
2). Output Type . I found out so many, LD00, LAVA, LD01, TPS0 and many more. Which one is the correct one????????
3). Process Code for message type TPSDLS ( for outbound IDOC).
4). Function module assign to this process code.
Pls . help me as this is very very urgent.
Thanks in advance,
Pratik

Usually the functional guy or the domain expert would be able to guide you regarding the "Output Type".
In case of urgent/swift answers, you might have to approach <a href="OSS">http://service.sap.com</a>
As far as my knowledge goes, in case it is ALE, there is not a requirement of process code for outbound IDocs.
I would request you to purchase a good ALE book. The one which I always carry along is :
ALE,EDI & IDoc Technologies for SAP - Arvind Nagpal, John Pitlak
Hope you find it useful.
Best Regards,
Subramanian V.

Process code for project

Hii ,
I was just wondering if there was an inbound process code for message type PROJECT . I am trying to generate a inbound partner profile for message type PROJECT and idoc type PROJECT01 . I am not sure what process code should i use . Please tell me
thank you

Hi,
The process code to use with Project/Project01 is 'BAPI' as the interface is based on a Bapi concept.
Regards
JF

Process codes for Idoc types

Similar Messages

Maybe you are looking for