Process codes for message types IORDER and INOTIF

Hi All,
I need to know the process code for above message types.
I could not get specific process code in WE64.
Regards,
Shahu

Hi,
Try searching in WE42.
This is what i found we64 (same for both message types):
ABI_AIDN_IN
ED00
ED00_XML
ED08
Good luck! Reward if helpful.
Message was edited by:
        John Damion

Similar Messages

  • What is the process code for message type FIXEDASSET_CREATE?

    Hi all
    please tell me that what is the process code for
    MESSGAE TYPE = FIXEDASSEt_CREATE,
    FUNCTION MODULE = IDOC_INPUT_FIXEDASSET_CREATE,
    BASIC TYPE = FIXEDASSET_CREATE01 ?
    thanx in advance.......
    Edited by: Prachi Sharma on Jan 11, 2008 7:45 AM
    Edited by: Prachi Sharma on Jan 11, 2008 8:03 AM

    Hi,
    Check the Tcodes WE41 and WE42 for Outbound and Inbound process codes
    Check below Tables as well
    EDE1T
    EDE2T
    EDE5T
    EDE6T
    TEDE5
    TEDE6
    Regards,
    Satish

  • What is the process code for Message type FUNDMA

    Hi,
    I am sending CO elements to the distributed server using ALE. Can somebody tell me what is the process code for the message type FUNDMA?
    Thanks
    William

    Check entries of table VEDI_TMSG1. This contains Message types and associated Process codes.
    Hope this helps.
    ashish

  • Process Code for Message Type LOIPRO(in ALE/IDOCS)

    Hi all,
            I have to implement Production order Interface(create Production order,change Production order etc).The requirement is for eg:,I created one production order and posted it;it should get reflected in the recieving system.Does anyone know the process code for LOIPRO.I checked it in we42,WE64 and even the tables TEDE1 and TEDE2.But its not available.Process code and function module is necessary to continue with WE20.
    Thanking you in advance,
    anjaly

    Hi
    it may sound like not good news, but I think the answer is described in OSS Note 198252 - Special features of POI message category LOI*.
    There all LOI* idocs are mentioned and then they say:
    The message categories named are part of the POI (Production Optimization interface) interface.This interface and the message categories contained in it were developed for the transfer to non-R/3 systems.Therefore, an inbound processing in the R/3 system is not planned.The message categories are transferred via separate transactions / reports of the POI interface (Transactions POIM, POIT).Functions which exceed these transactions are not supported.For this reason, the above-mentioned ALE functions cannot be used for the message categories described.
    So, in short, there is no inbound process code for LOIPRO.
    Inbound processing then should be done through self-developed programs / idocs, calling BAPI-s (for example).
    Regards,
    Joe
    Edited by: Joseph Yasman on Jun 30, 2009 1:46 PM

  • Process codes for Idoc types

    Hi All,
    Can you please send me the process codes for the following IDOC types as I could not find them in WE64. Also let me know how did you found out.
    IDOC types are:
    1) INTERNAL_ORDER_CREATE01
    2) PROFITCENTER_CREATE01
    3) COSTCENTERGROUP_CREATE01
    Urgent help is really appreciated.
    Regards,
    Shahu

    Hi,
    1) INTERNAL_ORDER_CREATE01
               Please clarify for which order you are using this.
    2) PROFITCENTER_CREATE01 -
               PRCM (PRCMAS)
    3) COSTCENTERGROUP_CREATE01
               COSM (COSMAS)
    Reward points if useful.
    Regards,
    Atish

  • Creation of Process code for output type

    Hi,
    Could someone help me out in defining processcodes for output types.
    Thanks in advance,
    Yaseen

    Hi Yaseen,
    The Tr.code WE41 and WE42 are also used for maintaining process codes.
    To maintain process codes in WE41 or WE42, Go to these Tr.Codes and Click on the Change button. Then click on "new entries" button to create your new process code.
    FYI, Outbound process codes are stored in SAP Table TEDE1 and inbound process codes are stored in SAP Table TEDE2.
    Hope this helps.
    Rgds,
    Sam Raju
    Message was edited by: Sam Raju

  • Process code for project

    Hii ,
    I was just wondering if there was an inbound process code for message type PROJECT . I am trying to generate a inbound partner profile for message type PROJECT and idoc type PROJECT01 . I am not sure what process code should i use . Please tell me
    thank you

    Hi,
    The process code to use with Project/Project01 is 'BAPI' as the interface is based on a Bapi concept.
    Regards
    JF

  • STD Process code for PR

    Hi...Is there an SAp std process code that uses the FM - IDOC_INPUT_PREQCR
    PR creation
    regards,
    Arvind R

    Hi Shankar,
    Thanks for quick for reply. We have tested this process code with IDoc type - GSVERF03 and message type - GSVERF. It worked for us for MIRO transaction.
    we are testing with IDoc type INVOIC02.
    once again thanks for sharing the process code.
    Regards,
    Brahma

  • Process code for IDOC Output from MIRO

    Hi,
    We need to find the Process code for IDOC output to assign Output type in ECC. We need the IDOC output to some other system like PR while doing the invoice Posting (Transaction code MIRO). We tried Using process code SD09 for the IDOC with IDOC Type INVOIC02. In SD09 we are getting error (Update terminated) when we trigger the output while saving in MIRO transaction.
    Further we understand that process code SD09 is used for SD billing and Invoice process.
    We need your help in
    1.      getting the correct process code for the IDOC generation for Invoice posting thru MIRO.
    2.      If we need to configure one process code, let me know the correct function module for the same.  
    Please Note, we need this as Output Idoc from Invoice Posting MM (MIRO).

    Hi Shankar,
    Thanks for quick for reply. We have tested this process code with IDoc type - GSVERF03 and message type - GSVERF. It worked for us for MIRO transaction.
    we are testing with IDoc type INVOIC02.
    once again thanks for sharing the process code.
    Regards,
    Brahma

  • What is the Process code for IDoc SISCSO01

    Hi all,
    I am using 4.6c version.
    I am going for an outbound IDoc SISCSO01 for sales Order confirmation.
    I want the process code (we41) which suits this IDoc SISCSO01.
    Can you please help to get the process code so that my IDoc can be sent succesfully.
    Best Regards,
    Gangolu

    Hi Gangolu,
    I don't think there is an outbound process code for IDoc type SISCSO01.
    But you can generate the IDoc with this FM <b>MCV_STATISTICS_ALE_OUT_ORDER</b>. But you still need to setup partner profile, distribution model and etc.
    Hope this will help.
    Regards,
    Ferry Lianto
    Please reward points if helpful.

  • Process code for invoice

    Hi ,
    I need to know if there is any process code for outbound invoice idoc and inbound invoice idoc . Please let me know I know there is process code INVM for MM - invoice. Is this is the same as normal SD invoice ?
    Thank you

    Pls check this thread on inbound invoic processing...
    Re: Custom segments in INVOIC02
    Check the process codes - SD08 & SD09, for generating outbound invoic idocs.....
    Thanks,
    Renjith

  • Message type and Process Code for 940 IDoc

    Hi,
    what Message type and Process Code can be used for 940 IDoc when a SHPMNT05 IDoc is being used. We are using SHPADV message, SHPM process code for ASN. Can I use the SHPMNT message type for 940?
    thanks,
    Kumar.

    should SD11 be the only process code to be used or can we use SHPM. I guess we can use both for shpmnt05. But how do I know which process code is more suitable for my purpose. is there any place where i can check that info?
    Can we link SHPORD message type to a SHPMNT05 IDoc? i think this message type is more suitable.
    thanks,
    Kumar.

  • Process code for 869(EDI ) Order Status Inquiry Message type.

    Hi Gurus,
                       Please can any one help in providing Process Code for 869 Order Status Inquiry Message type.
    Thanks,
    Sudhakar

    Hi Everybody.
    There's no standard process code for LOIPRO Outbound Idocs.
    This Idocs are threated as master data info, and could only be automatically generated by Data Distribution Model.
    BD64.
    Anyway, you can define your own Outbound Process Code in WE41 using CLOI_MASTERIDOC_CREATE_LOIPRO FM.
    You can choose.
    Regards.
    Albert.

  • Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 ,214

    Hi friends,
    Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 (Response to a Load Tender)., 214 (Shipment Status )
    For shipement status i got trxstc01 for idoc type .. but its only before 4.6 version ..for 4.7 its not there .. please give the alternate for that ...
    Thanks in Advance ....
    If any one is provide exact answer i will give Max marks ..
    Edited by: ajay KOLLA on Aug 6, 2009 8:04 AM

    Hi,
    Have you resolved this issue. If yes, can you please let me know. Im actually looking for same for EDI 867 (guess it is for summary report and need to know message type, Idoc type associated with this).
    Rgds
    Sudhanshu

  • Specific process code for Production order message type LOIPRO

    Hello,
    Is there any specific process code for Production order message type LOIPRO.
    Request you to reply.
    Thanks
    Prashanth

    Hi Prashanth,
    sorry for last thread ... that not contain full information ...
    For message type LOIPRO you can use process code APLI.
    In IDOC PARTNER definition, the partner is linked with an IDOC TYPE and PROCESS CODE for inbound processing. This process code is in turn linked with a FUNCTION MODULE to process the IDoc such as IDOC_INPUT_INVOIC_MRM (Reff..  http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_cid519558,00.html)
    Regards,
    Amit

Maybe you are looking for

  • Cannot Resize Images in Elements 8

    Hi, I recently had my laptop stolen and I had to reinstall in Elements 8 on my new computer. Since then, I have unable to resize images. I go to Image -> Resize -> Image Size and the pixel dimensions box is grayed out and I am unable to change the pi

  • HT2822 Apple TV connection : xfinity hot spot?

    is there a way to connect my ATV to the xfinity hot spot?  It says connected but it doesn't redirect me to log on to xfinity.  So my screen only shows settings box and computers box

  • RH 11 v11.0.2.240:  Cleaning up an External Style Sheet (CSS)

    Hello, I am in the process of trying to clean up a CSS for an "old" RoboHelp project.  I believe the CSS contains many unused styles that were probably "trial & error" styles, but were never deleted when they failed to produce the correct format.  I

  • Translating Web Dynpro Standard Components texts ?

    Hello I am testing NWDW 7.0 SP3 and i want to make a Web application in my own language (Serbian, Serbo - Croatian). I have found a lot of documentation about creating international Web Dynpro applications where developers can translate their own tex

  • Release procedure reset after flag delivery completion indicator is set

    Hello Exports, We have following shenario. There are 2 release strategies 1. < 20 Lacs - S1 2. >20 Lacs - S2 We create a PO having two line items. Release strategy was S2 Then the first item in the PO is deleted. Then GR is done for the 2nd item part