Process Component Architecture Modeling

Hi,
Is there any way to link process components of PCA Modeling in PI 710 to Software Component or to Software product? If not the case means what is the use of these models. Appreciate for your response.
Thanks,
Rao.Mallikarjuna

You can model Process Component models till Message types details.
Regards,
Prateek

Similar Messages

I can't save Process Component Interaction Model

Hello together,
unfortunatly I have a big problem to save a process component interaction model. Sometimes it works and sometimes I get the error message (there is no special behaviour to get that error):
"Save operation is not possible. Internal error: An item in the database has already been deleted."
What item is deleted? What does that error message mean?
Thanks for your ideas.
Regards,
Yvonne

Make sure you're not trying to save to the cloud. Have a look on here for this error and you'll see it's quite common
It could be when your Mac is trying to sync with the cloud. Turn this off and see if it fixes your issue
Everytime I try to save a document in .pages it tells me: The file “Untitled.pages” couldn’t be opened. All I want to do is save it.. not open it.. help! Any ideas??

Process Component Interaction Model to Configuration

Hi,
I've developped several interfaces by using Process integration scenarios . Now I want to use a Process Component Interaction Model as the starting point. The documentation describes how to build the different models but I don't find anything on how to go from your Process Component interaction model all the way to a configured scenario.
I suppose, you drill down all the elements and create the different design objects but I would like to actually have some documentation guiding me through it the first time.
Is there anything out there ???
The help seems to be still geared towards the PIScenario of previous versions.
Also, has anyone found a good book regarding modeling in PI other than interface patterns and the B2B book... everything I find seems to be for older versions .
Thanks.
Thierry

Did you ever resolve this issue? I am facing exactly the same issue and have the same question.

Creating a Configuration Scenario from Process Component Interaction Model

Dear All,
I created a very simple SAP Pro Comp Interaction Model in ESR.
It has two Process Components (PC1, PC2) with a Service Interface (SI1,SI2)
and Operation (OP1,OP2) each.
There is one message (MT1) flowing between these two Process Components.
I have created and activated all ESR objects.
Now I try to configure the same in ID.
But I get an error in Model Configurator saying
"Process component PC1 does not contain a reference to a process component from the Enterprise Services Repository"
"Process component PC2 does not contain a reference to a process component from the Enterprise Services Repository"
The first step of the Configurator ie. Select Model says "Not Configurable"
What could the issue be? Has anyone configured a Pro Comp Interaction Model successfully?
I am able to configure the SAP delivered Models perfectly well. Just an issue with custom models.
Thanks and Regards,
Ashwin

Did you ever resolve this issue? I am facing exactly the same issue and have the same question.

Process Component Assignment Not Possible

Hello,
i have created a process component within a process component interaction model. Unfortunately I'm not able to assign anything to the component. Hence it's lacking a namespace.
Are there any special prerequisits for assigning a namespace to a process component?
Thank you for any help in advance,
Heiko
see also: Does Model Configurator in ID works for ProComp Interaction model

Hi,
Just a quick thought:
If your order is having status CRTD or REL (but without any confirmations, goods issue, settlements) then you can use the Read PP Master Data (Order header - Functions - Read PP Master Data) & this will re-read your routing & BOM. But for this to work for you, the routing should be updated with the assignments.
So what you could do is start processing your order as late as possible, thereby you can re-read the BOM & Routing as the modifications take place.
But if this is not possible in your scenario, then i am not aware of a BAPI or a FM which adds components to different operations in production order, you might evaluate writing a BDC program for the same. Anyways will update you if i manage to find a BAPI or a FM for this.
Hope the above helps.
Regards,
Vivek

Integration Scenarios vs Process Component Modelling

Hi Experts,
Just wanted to know:
1) How theoritically and technically, is 7.0's Integration Scenarios different from 7.1's Process modelling?
2) For what kind of cases we go for Integartion Scenarios and for what kind of cases we model a PCM?
3) What is "Deployment Unit" in PCM?
Thanks
Shailesh

Hi,
>>>1) How theoritically and technically, is 7.0's Integration Scenarios different from 7.1's Process modelling?
Process Component modeling is ment for modeling SOA, where you create a Business Object, Service Interfaces, etc and this help to understand the business semantics of enterprise services in the business process platform. And you will not create Receiver Determination, Interfaces Determination out if that. Where as Integration Scenario is meant only for integration where you define Sender system, receiver system etc...
>>>2) For what kind of cases we go for Integartion Scenarios and for what kind of cases we model a PCM?For normal integration between 2 or more systems you use Integration Scenario. But Process Component Model is for Service Provisioning.
>>>3) What is "Deployment Unit" in PCM?
All the related/dependent Process Components are tied together in one unti and this is called Deployment unit. It also describes the logical boundary of the Process Component. Apart from this deployment units are the only installable units and this shows what types of interactions are needed between process components.
Thanks,
Prakash

Bill and Routing Interface concurrent program is not processing component

Hi All,
While running Bill and Routing Interface concurrent program,not processing the component item(Line Item) from bom_inventory_comps_interface,still it show process flag as 1. where as billing item(Header Item) is successfully done..i have tried with all the option by giving component sequence id and batch id still it is not processing component item..
Is it recommendable to give bill sequence id and component sequence id in interface table using bom_inventory_component_s sequence..
I will be very pleased if i listen from u guys... Plz help me in resolving this issue..
My Header Insert Stmt..
INSERT INTO apps.bom_bill_of_mtls_interface@system_link_visma
(assembly_item_id, organization_id,
alternate_bom_designator, last_update_date,
last_updated_by, creation_date, created_by,
revision, item_number, item_description,
implementation_date, transaction_type,
process_flag, assembly_type, batch_id
VALUES (l_inv_item_id, l_org_id,
NULL, SYSDATE,
1318, SYSDATE, 1318,
l_revision, l_item_num, l_description,
SYSDATE, 'CREATE',
1, 1, 10003535
Component Insert stmt
INSERT INTO apps.bom_inventory_comps_interface@system_link_visma
(operation_seq_num, component_item_id,
item_num, basis_type, component_quantity,
auto_request_material, effectivity_date,
disable_date, planning_factor,
component_yield_factor,
enforce_int_requirements,
include_in_cost_rollup, wip_supply_type,
supply_subinventory, supply_locator_id,
check_atp, optional,
mutually_exclusive_options,
low_quantity, high_quantity,
so_basis, shipping_allowed,
include_on_ship_docs, required_to_ship,
required_for_revenue, component_remarks,
transaction_type, process_flag,
assembly_item_id, component_item_number,
batch_id,component_sequence_id
VALUES (l_operation_seq, l_comp_item_id,
cur2.item_sequence, l_basis, cur2.quantity,
l_auto_request_mtls, cur2.from_date,
cur2.TO_DATE, cur2.planning_factor,
cur2.yield_factor,
l_enforce_int_requirements,
l_include_in_cost_rollup, l_supply_type,
l_supply_subinventory, NULL,
l_check_atp, l_optional,
l_mutually_exclusive_options,
cur2.minimum_quantity, cur2.maximum_quantity,
l_sale_order_basis, l_shippable_flag,
l_include_on_ship_docs, l_required_to_ship,
l_required_for_revenue, cur2.comments,
'CREATE', 1,
l_inv_item_id, l_comp_item_num,
10003535,apps.bom_inventory_components_s.nextval@system_link_visma
For Subcomponent Insert Stmt
INSERT INTO apps.bom_sub_comps_interface@system_link_visma
(substitute_component_id,
substitute_item_quantity,
assembly_item_id, component_item_id,
operation_seq_num, organization_id,
substitute_comp_number,
component_item_number,
assembly_item_number,
transaction_type, process_flag,
enforce_int_requirements,
effectivity_date,component_sequence_id,batch_id
VALUES (l_sub_comp_item_id,
cur3.quantity,
l_inv_item_id, l_comp_item_id,
cur2.operation_sequence, l_org_id,
l_sub_comp_item_num,
l_comp_item_num,
l_item_num,
'CREATE', 1,
l_enforce_int_requirements,
SYSDATE,apps.bom_inventory_components_s.currval@system_link_visma,10003535
Thanks
Raman Sharma
Edited by: 929841 on May 4, 2012 12:28 AM
Edited by: 929841 on May 4, 2012 2:58 AM

You need to populate the organization_id or organization_code in bom_inventory_comps_interface.
Here is a minimal insert
INSERT INTO bom.bom_inventory_comps_interface
            (operation_seq_num, last_update_date, last_updated_by,
             creation_date, created_by, process_flag, transaction_type,
             bom_item_type,
             effectivity_date, organization_code, assembly_item_number,
             item_num, component_item_number, component_quantity
     VALUES (1                                                   -- op_seq_num
             ,SYSDATE, 1433
             ,SYSDATE, 1433, 1                                  -- process_flag
             ,'Create',
             4 -- bom_item_type 1 Model; 2 Option class; 3 Planning; 4 Standard; 5 Product family
             ,SYSDATE - 1, 'PUB', 'SSGPARENT1'          -- assembly_item_number
             ,10                                                     --item_num
             , 'SSGCOMP1'                           -- component_item_number
             , 10                                          --qty
            )Sandeep Gandhi

PI 7.1 Process Component

Hi All:
In PI 7.1, I am seeing one new option called Process Component in ID.
Is there any documentation which explain what this obect is? I search sap help and sdn...but there it doesn't give any information about this object.
Also anyone created Process Component Interaction Modle in ESR and imported successfully in ID?
Thanks
Farooq

Hi Farooq,
Check this :
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/media/uuid/40f1ed0e-278a-2a10-c0b9-e5c931049a46
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0243748-acbb-2a10-0fa7-ba7a353ae668
regards
Ganga

Scenario and Process Component List: Available on SAP Service Marketplace

<b>Is the following useful to a BPX?</b>
Warning: It is only available to those with a Service Marketplace logon.
This was shared by Content Strategist: Scott Jones:
The latest version of the Scenario and Process Component List on SAP Service Marketplace narrows the gap between the business view and the technical view of SAP's product portfolio. Customers can not only find out technical realization alternatives for SAP's business scenarios and processes, but also analyze which scenarios are possible with a given set of already implemented components. For planned upgrades, customers can analyze which scenarios have been enabled as well as which scenarios may no longer be available or require further upgrades of other components.
All new features can also be reviewed in the "<a href="https://websmp101.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000682251&_SCENARIO=01100035870000000202&">what's new</a>!" section. Access the Scenario and Process Component List at SAP Service Marketplace (<a href="http://service.sap.com/scl">http://service.sap.com/scl</a>).

Did you ever resolve this issue? I am facing exactly the same issue and have the same question.

Having variations of same business process, How to model?

Customer has several variations of the same business process. How to model them in Solution manager's project implementation tools? I actually created this same question in 'Business process expert' forum, so please read the whole story there and earn your points there.
Having variations of same business process, How to model?
Best regards,
Kimmo

Hi Kimmo,
I wouldn't use process steps to refine processes. This is incompatible to SAP implementation content coming from BPR (Business Process Repository). But a good idea would be to copy the main business process e.g. "Sales order processing" into two new processes on the same level, e.g. "Sales order processing by manual input" (variation1) or "Sales order processing by incoming interface" (variation2). Then you can use the Compare Button on the variations to see if any changes have been on the main business process and copy them to the variations. This minimizes the effort to keep track of changes after creating the variations. When you run transaction SA_PROJECT_UPGRADE on that project these changes even get flagged. Mostly this function is used to upgrade against BPR or a template project but it works also for copies inside a project e.g. to model variations.
Regards
Andreas

Using Component Object Model+ (COM+) in webdynpro

Dear friends,
How can I use Component Object Model+ (COM) in webdynpro? Is it feasible to use COM to access SQL Server 2005 Database.
Thanks and Regards,
Tarani

Hello Brian Tyler
I followed your instruction but I ran into another problem ~
I can't find the COM with the control
on this website
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/shellcc/platform/shell/programmersg...
I have found this section that I want to use:
Modifying the Contents of the Taskbar
Version 4.71 and later of Shell32.dll adds the capability to modify the contents of the taskbar. From an application, you can now add, remove, and activate taskbar buttons. Activating the item does not activate the window; it shows the item as pressed on the taskbar.
The taskbar modification capabilities are implemented in a Component Object Model (COM) object (CLSID_TaskbarList ) that exposes the ITaskbarList interface (IID_ITaskbarList ). You must call the HrInit method to initialize the object. You can then use the methods of the ITaskbarList interface to modify the contents of the taskbar.
but I can't seen to find it.
Oh and I visited your blog, it is awesome, the nano car article is cool
thanks for your help
Jimmy

How to continue the running process behind the model dialogue box options ?

How to continue the running process behind the model dialogue box options like this
In Updation of K7 user press the Cancel Button
New dialogue box appear with Yes/No options.
But the backend updation is going on... not Pause the updation.
Like this how to do ?
Please provide me code.

I don't know, if you mean you have done your form or you have solved the problem.
It's visible your code is only partly reflecting your screenshot, and that's okay to demonstrate the problem you have given a fine example.
As you marked my suggestion as solution this may not be needed anymore, but here's how I modified your code and used a self made QuestionBox instead of messagebox.
The essential part is defining a callback method and letting the QuestionBox call back there. It's not essential I used RAISEEVENT, but it's fine as it has all the behaviour and parameters needed to call back.
Public oTestFrm
oTestFrm=Createobject("MyForm_Model_to_NonModel")
oTestFrm.Show
Define Class MyForm_Model_to_NonModel As Form
onxx = 0
Add Object lbl_DispValue As Label With Top=90, Left = 120, Width = 50, Height=30, Caption=''
Add Object cmd_Start As CommandButton With Top=120, Left = 120, Width = 50, Height=30, Caption='Start'
Add Object cmd_Stop As CommandButton With Top=120, Left = 190, Width = 50, Height=30, Caption='Stop', Enabled =.F.
Procedure cmd_Start.Click
This.Enabled =.F.
Thisform.cmd_Stop.Enabled =.T.
Thisform.onxx = 0
Do While Thisform.onxx < 90000000
DoEvents
Thisform.onxx = Thisform.onxx +1
Thisform.lbl_DispValue.Caption = Transform(Thisform.onxx)
Enddo
This.Enabled =.T.
Thisform.cmd_Stop.Enabled =.F.
Thisform.lbl_DispValue.Caption = ''
Procedure cmd_Stop.Click
* Here, I want NO PAUSE -- (Show running numbers continuously...)
* how to control Model to NonModel in Messagebox.
QuestionBox('Really stop the process', Thisform, 'handleanswer')
Endproc
Procedure handleanswer
Lparameters tlYes
If tlYes && means Stop
Thisform.onxx = 99999999999999999
Endif
Endproc
Enddefine
Procedure QuestionBox()
Lparameters tcMessage, toCaller, tcCallback
If Not Pemstatus(_Screen,"oForms",5)
_Screen.AddObject("oForms","Collection")
Endif
oMsgBox = Createobject("QuestionBoxForm", tcMessage, toCaller, tcCallback)
_Screen.oForms.Add(oMsgBox)
oMsgBox.Show(2)
Endproc
Define Class QuestionBoxForm As Form
Autocenter = .T.
AlwaysonTop = .T.
Minwidth = 200
Add Object label1 As Label With AutoSize=.T., WordWrap =.T.
Add Object cmdYes As CommandButton With Caption = "Yes", Width=40
Add Object cmdNo As CommandButton With Caption = "No", Width=40
Procedure Init()
Lparameters tcQuestion, toCaller, tcCallback
Thisform.label1.Caption = tcQuestion+" ?"
This.AddProperty("oCaller",toCaller)
This.AddProperty("cCallback",tcCallback)
This.Width = Max(This.Minwidth, Thisform.label1.Width)
Thisform.label1.Left = (This.Width-Thisform.label1.Width)/2
This.Height = Thisform.label1.Height+48
This.cmdYes.Left = This.Width/2 - 10 - This.cmdYes.Width
This.cmdNo.Left = This.Width/2 + 10
This.cmdYes.top = Thisform.label1.Height+24
This.cmdNo.top = This.cmdYes.top
Endproc
Procedure cmdYes.Click
#Define clYes .T.
Raiseevent(Thisform.oCaller,Thisform.cCallback,clYes)
Thisform.Release()
Endproc
Procedure cmdNo.Click
#Define clNo .F.
Raiseevent(Thisform.oCaller,Thisform.cCallback,clNo)
Thisform.Release()
Endproc
Enddefine
I didn't yet introduced a timer for counter display updates. As you see the counter hangs a bit, if you mouse over your form, but it is a way of multithreading without using a separate thread and instead keep the rest of the application active by DOEVENTS
in the long running loop code.
Bye, Olaf.
Olaf Doschke - TMN Systemberatung GmbH http://www.tmn-systemberatung.de

Component Backflush (MFBF) - Process component list - User exit?

We do the goods issue of the component (Mvt: 261) using the option below;
"Component Backflush (MFBF) - Process component list". The users add the component directly in the screen entry "Process component list". But when they save, the requirement is to "add an additional packaging material internally say in a userexit or BADI". Is it possible to add another component automatically using userexit?
I tried the enhancements: XMRM0001 and also BADI for GOODSMVMT but no help. Any ideas? Appreciate your help. And expect a REWARD !!!! :):)
Srini

When I hit 'SAVE' on "Process Component list" screen, it stops at EXIT_SAPLMBARM_002. But by that time the material document is already created
The process steps that I follow are as below:
1) MFBF
2) Choose radio button 'Component Backflush'
3) Click on 'Process component list'
4) Enter the Material 'M1', Plant and batch, Qty, Mvt: 261 and Hit enter
5) ...... NOW ..
6) BEGIN .. THE CUSTOM REQUIREMENT
"When there is M1 in the list, Add automatically 'P1' material with 531 Plus
"When there is M1 in the list, Add automatically 'P1' material with 261 Minus
7) END .. THE CUSTOM REQUIREMENT
8) So the resulting Material document (Goods Issue) will have 3 line items:
a) M1 261
b) P1 531
c) P1 261
Thank you somuch. You can call me too if you can: 813-504-7100.

Error after process a Tabular model

Hi,
When I process a Tabular model, sometimes I have the next error
"Error moving file '\\?\G:\filename.80.det.xml_TEMP_3804' to file '\\?\G:\filename.80.det.xml': ." I see in a XEvents trace that process finished ok and then throw the error.
Does somebody know the reason?
Regards,

Hi Numer04,
It's hard to give you the exact reason that cause this issue. However, you can troubleshoot this issue by using the Windows Event logs and msmdsrv.log.
You can access Windows Event logs via "Administrative Tools" --> "Event Viewer". SSAS error messages will appear in the application log.
The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
Data collection for troubleshooting Analysis Services issues
Regards,
Charlie Liao
TechNet Community Support

About process component , service interface

Hi all, what do process component and service interface mean? why and when do we need process component and service interface? when we generate the code in NWDS, it will generate a interface class that standing for service interface in ESB, do it? how can we use the third-party process component in ESB?thanks

-> I deleted RA and when I tried to create new RA, I was not able to see the new SI created. I went to the Business component to add the new SI but there also am not able to add.
Did you check the filter criteria as 'ALL' to list both outbound and inbound service interfaces in the pop up list?
Also check in ESR if you have properly activated the new SI and cache content is updated.
Regards,
Zameer
Edited by: Zameer Hamza on Jun 16, 2011 4:09 PM

Process Component Architecture Modeling

Similar Messages

Maybe you are looking for