Process Decomposition Level 5 Completion Criteria

I need to develop a checklist or criteria to evaluate when a business process has been adequately described to decomposition Level 5 of analysis.  Would anyone have recommendations regarding where to look for guidance of this topic?

Hope,
Can you please name or give some background information what these 5 levels of process decomposition are.
The level of decomposition for processes which i have come through my experience is 3 namely scenario,Process, Process steps.
Rgds
Manish

Similar Messages

  • ALEREMOTE LOCK at Process chain level

    hello experts,
    Please suggest me to resolve this ALEREMOTE LOCK at process chain level.
    Because of this the  chain is failed at different process levels.
    the below mentioned is the job log.
    Job tarted                                                                               
    Step 001 started (program RSPROCESS, variant &0000000464318, user ID ALEREMOTE)                                                                               
    Object requested is currently locked by user ALEREMOTE                                                                               
    Entire chain now has status 'R'                                                                               
    Process Generate Index, variant Generated from LOADING ZPAK_3TLYNXGWP514GLCXQ33XDE has status Undefined (instance )                                          
    Process Execute InfoPackage, variant PC : Quotation NA to Pipe has status Undefined (instance )                                                              
    Process Start Process, variant Start Hist and Pipe load has status Completed (instance 4B15FK2YHXC7EW1D221A4EHIM)                                            
    Process Local Process Chain, variant 6660 ZSDC2ABC has status Successfully completed (instance 4B14MFS6APTW94XB79A4MSTV2)                          
    Process Delete Index, variant Generated from LOADING ZPAK_3TLYNOIAKRPCQAO2X0DLN4 has status Successfully completed (instance DIDX_4B16EOQH4JK3BMJ41536QIHPQ) 
    Process Execute InfoPackage, variant PC : Quotation NA to Historical has status Successfully completed (instance REQU_4B180R5J6D8OIIEK0S9K0OH0U)             
    Process Generate Index, variant Generated from LOADING ZPAK_3TLYNOIAKRPCQAO2X0DLN4 has status Successfully completed (instance INDX_4B18Q9XP4GQZLL7LXGI5JYFXQ)
    Process Delete Index, variant Generated from LOADING ZPAK_3TLYNXGWP514GLCXQ33XDE has status Undefined (instance DIDX_4B18CADCFC1SL10FHBFZ7ZINI)              
    Termination of chain has been reported to meta chain 4B154CLBHDTKWHZEYFNE6RWOE                                                                               
    Job finished    
    Additional information::
    For the fisrt month - Error occured in block load infopackage
    Message text:Process Execute Info Package, variant PC: Quotation NA to Pipe has status Ended with errors (instance REQU_49OKKAVXV8WM75XY9268J
    Second month - Error occured in block load infopackage(same as last month)
    message text:Process Execute Info Package, variant PC: Quotation NA to Pipe has status Ended with errors (instance REQU_4ACQBCYASM88BVNSCWVG6
    Fourth month - error already in the first load
    Message text:Process Execute InfoPackage, variant PC : Quotation NA to Historical has status Ended with errors (instance REQU_4APCZRLE8E4BAY0     
    Fifth month - error in the "delete indexes" step
    Message text: Process Delete Index, variant Generated from LOADING ZPAK_3TLYNXGWP514GLCXQ33XDE has status Ended with errors (instance DIDX_4B1.
    Thanks in advance
    Edited by: S MB on Sep 9, 2008 12:01 PM
    Edited by: S MB on Sep 9, 2008 2:29 PM
    Edited by: S MB on Sep 9, 2008 2:31 PM

    Thanks for replies.
    Its a issue related to Transaction data(No master data is in these PC loading).
    Any body let me know is there any TCode available in BW  to see all jobs which are running on a specific CUBE / ODS.
    I mean...How can we come to know the jobs(all jobs in a same time) which are running on a perticular CUBE/ODS?
    Instead of SM12 & SM58
    Thanks in advance.
    Edited by: S MB on Sep 10, 2008 7:32 AM
    Edited by: S MB on Sep 10, 2008 8:02 AM
    Edited by: S MB on Sep 10, 2008 8:08 AM
    Edited by: S MB on Sep 10, 2008 10:58 AM

  • I bought the game from the iTunes process has not been completed?

    I bought the game from the iTunes process has not been completed?

    If you are getting a message to contact iTunes support to complete it then you can contact them via this page (these are user-to-user forums) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • Process flow fails to complete when another in the same package is deployed - OWB 11.2.0.2

    Hi,
    I have  problem with OWB Process Flows whereby whenever I deploy a process flow within an existing package, another Process Flow becomes (unknown to me) invalid and will not complete execution.
    When deploying the first process flow, I am synchronising all mappings within it, saving, validating and saving again before deploying it. This process flow then functions ok but then a random process flow within the same package malfunctions. By this I mean the process flow does not complete, as if it has lost some connectors. Has anybody else had this problem?

    HI Richard,
    Thanks for your reply. Yes I agree with your answer but sadly this does not seem to be the cause of the problem in my case as I always stop any running processes and double check with the list_requests.sql as provided and where necessary execute the deactivate_execution.sql and/or abort_exec_request.sql only if absolutely required. Finally I check again with list_requests.sql and if necessary run in the OWF_MGR schema: WF_PURGE.TOTAL and/or the following sql (again only if required) :
    BEGIN
    FOR cur_rec in (SELECT ITEM_TYPE,ITEM_KEY FROM OWF_MGR.WF_ITEM_ACTIVITY_STATUSES
      WHERE ACTIVITY_STATUS = 'ACTIVE')
    LOOP
    OWF_MGR.WF_PURGE.MOVE_TO_HISTORY(cur_rec.ITEM_TYPE,cur_rec.ITEM_KEY);
    COMMIT;
    END LOOP;
    END;
    So I am sure that no processes are running before I begin deployment. Thanks again for your reply.

  • Thread Process is exiting without completing the process in SharePoint 2010 webpart

    We have implemented simple thread to process to excel upload into SharePoint 2010 custom list.
    Thread process running in local SharePoint 2010 environment (OS -Windows 7). Once we deployed in SharePoint server,
    Thread process is exiting without completing its proces.
    Please let us know if you know any resolution.
    Code is as below
    Thread thread = new Thread(new ThreadStart(UploadData)); //Upload is the method where data will insert into List
    Thread.Start();
    Marulasiddappa SB (Swamy)

    Hi,
    According to your post, an error occurred when you used Thread in SharePoint 2010 web part.
    Please can do as follows:
    1. Execute the  UploadData method to see whether it can work.
    2. Debug your solution in Visual Studio to get more information the error,
    It will be easier for us to research if you can provide more code.
    Best Regards
    Dennis Guo
    TechNet Community Support

  • TS1424 ITune download continues to process but doesn't complete. What could be the issue

    ITune download continues to process but doesn't complete. What could be the issue

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

  • I clicked erase content and setting before 12 hours but it is not processing till ie not completed till what can i do

    i clicked erase content and setting before 12 hours but it is not processing till ie not completed till what can i do

    On a 4S the erase should take under 10 seconds. As it has taken longer there must have been data corruption on the phone. Reboot it by holding HOME and SLEEP until an Apple logo appears. If it has not be cleared of all data connect it to iTunes and Restore it. Then erase again.

  • How to use "Configure Motion Completion Criteria"

    I am trying to direcly create a feedback loop on a servo using Flexmotion VI's.
    I have configured the axis to look at a specific ADC input as primary feedback, but cannot find a way to tell it the goal voltage or when the move has :"completed".  The configure "Motion Completion Criteria" permits me to set a deadband around a specified value, but I cannot find how to load that desired value into the feedback path.  Is there a way to link this?
    Thanks!

    I have read through the document and things follow fairly easily with the exception of the last page.
    [The name of "Target Poistion", "Velocity, and "Accel/Decel" in MAX and LabView will have different meanings depending on the type of analog feedback used.]
    I understand if a velocity or acceleration sensor is used, the meanings of "Velocity", "Position", etc. change.  The next page gives an example of loading target value.  It describes a velocity sensor linked to what seems to be the ADC channels. 
    How does the controller distinguish between velocity and acceleration with a voltage -digital bit signal?  I feel as though I am perhaps misreading or misinterpreting something.  It seems that the ADC channels would not be able to distinguish one sensor from another if all it was given was a voltage source.  For my application, I wish to feedback a voltage signal corresponding to load (from load sensors).  I therefore have no idea what configuration that corresponds to (I feel inclined to guess position, is that correct?). 
    Next question,  If I can relate load to digital bit values, and use that as target value feedback, will the displacement values also be returned?  Do I configure those as secondary feedback?
    I am sorry to be such a bother, but I am new with this setup.

  • Since the NEW version has been installed, I've receive an update notice of a critical update. Each time I select to apply that update the dialog display never apply any update, it looks to be in a processing state but never completes.

    Any Firefox updates are set to automatically update on my computer. I currently have version 4.0.
    Since the NEW version has been installed, I've receive an update notice for a critical update several times. Each time I select to apply that update the dialog display never apply any update, it looks to be in a processing state but never completes. Of late I've had 2 unexpected issues surface. (1) a Flash Player stopped flashing, an "player stopped" message appeared, "send error report" and a reload player message was included. (2) I just received a error message > 400 "Bad Request" when the browser first opened. This has never happened before.
    Michael Armstrong
    mikes16arms

    It is a Remote Desktop Client Update 3.7.1
    Thank you for answering. I apologize it has taken me so long to get back in here.
    I just realized that I wrote that I installed from app store originally, but I must correct that statement. I never paid for the app so it must have come preinstalled on my 2011 iMac. I was confused since the update is through the store so I assumed I downloaded it. Sorry for any miscommunication.
    So to be clear, even though I have never remotely administered / accessed my computer and I no longer have ARD on my computer, it is normal to have the client update appear in my App Store. Is that correct?
    I appreciate your assistance.

  • In-Flight BPEL Process Instances not getting Completed

    Hi,
    I have BPEL P.M. 10.1.3.1.0 running. In BPEL Console I can see few process in
    In-Flight BPEL Process Instances section. But in realty those process should be in completed section. When I login as bpeladmin in worklist application, I see those process are in completed status.
    What can be issue? Any one come across this? Any patch available from metalink to resolve this?
    Need help resolving this issue.
    Regards,
    Jigar

    I see this too sometimes. In my case it's mostly due to the fact that the first activity that takes places after the callback fails. E.g. a transform that fails with a type error.
    Check the bpel domain log file to find any errors in your bpel that's receiving the callback. There's probably something wrong with an assign or transform there.
    The domain logfile can be found @: $ORACLE_HOME/bpel/domains/<your_domain>/logs/domain.log
    HTH,
    Bas

  • "Process could not be completed" iTunes store error

    I tried to purchase some gems in Castle Clash 5 days ago (after purchasing some just fine a week ago), only for it to tell me that "the process could not be completed. Contact Itunes support." So I did. There was only an option for an email so I sent one. An automatic reply came through saying "we'll reply within 48 hours" and sure enough, (because this is Apple) no reply came. I can't call Apple Australia, because I'm in France. It would cost so much. I can't call Apple france because I don't speak great french. I'm getting a bit annoyed too because I backed up my phone and restored it, like COMPLETELY wiped my phone and I still get this error message. I tried another few apps and the same thing happens. My phone isn't jailbroken and I'd bought gems a few days before getting this error, there isn't anything that I did that seemed to have caused this. It's just randomly happened for NO REASON. Is there any way to solve this myself, and if not will I just have to wait it out for another month when I get back to Australia? (The game's got all these promotions cause it's Christmas so I'd really like to buy heaps now to get lots of extra ones).
    thanks for your help!

    the 48 hours: take into account the timedifference between Paris and Sydney, and take into account that it is new year there 10 hours earlier.

  • HT3805 I selected 179 photos to be have printed 4 x 6.  The program indicated that they were being processed.  After the completion of that process I get the message that I cannot get a connection.  What gives?  I can connect to the internet for other pro

    I selected 179 photos to be printed 4 x 6.  The program indicated that they were being processed.  At the completion of the processing, I get the message "I can not get a connection".  I am able to connect to the internet for other programs, but not aperture.  What gives???

    Hello thexchicop,
    Thanks for using Apple Support Communities.
    I'm sorry to hear about the difficulties you're experiencing when trying to place your prints in Aperture.  I'd like you to do the steps in this article to help resolve the issue:
    Aperture 3: Book ordering panel turns white when submitting an order
    http://support.apple.com/kb/TS3464
    Take care,
    Alex H.

  • Scheduled process 'iOS Apply Policies' completed failed!

    Hi,
    Getting an error "Scheduled process 'iOS Apply Policies' completed failed!" in Afaria Server.
    every day @ 12.00.00 AM.
    kindly help me to solve the same.
    Thanks,
    Boopalan M

    If you're in a multi-tenant environment make sure that the different schedules don't overlap.
    TenantA's Apply Policies schedule MUST be finished before TenantB's Apply Policies schedule will start. It's a bug and I hope it will be fixed in or before SP5 :-)
    BR
    Peter

  • Post Operation Processing Initiated status after completion of approvals

    Hi All,
    I have implemented an approval work flow that has two levels of approvals. The two levels of approvals are completed successfully, but the status of the request is not changing to "Request Completed". The status of the request is showing as "Post Operation Processing Initiated".
    Please let me know what needs to be done for the status of the request to be changed to "Request Completed".
    Thanks in advance for your help.

    Check for any manual provisioning task assigned to system admin or any other user according to the configuration you have provided and complete it. "Post Operation Processing Initiated" status comes after operation level approval gets completed and some provisioning task is pending. If everything is completed check for Task to object status mapping and change it to Provisioned as suggested by Rajiv.
    If you still could not find what is the reason then connect to OIM db and query OSI and ORC tables to check the task which is in pending status.
    Edited by: Durgaprasad on Jan 28, 2013 8:58 PM

  • Re: Schedule a WEBI report once the BW process chain loading is completed

    Hello Guys,
    I want to schedule a webi report once the process chain in bw is sucessfully completed .Did any one face this situation before ?
    is it possible to trigger a event from bw to webi and schedule a webi report to end users once the process chain loads the data into cube sucessfully
    i searched sdn but didnt find any help related to this topic
    can any one help me with the above issue asap
    step 1 : Trigger the process chain load the data till cube
    step 2 : add a process type whcih has program - at the end of the process chain
    step 3 : trigger a event in BO inorder to schedule a webi report to end users from this program ? how to do it
    i want to know how to trigger a event in bo from bw using r/3 program inorder to schedule a WEBI report
    any help on this topic is highly appreciated

    Hi Venkat,
    At present, there is no standard functionality available in SAP NetWeaver 2004s BW/BOBJ that offers this integration and automation.But you can do it as given in following link
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c09033ab-4593-2e10-5fa0-b23bcfa1575a?QuickLink=index&overridelayout=true&51887500308956
    Regards,
    Pushkar Dhale

Maybe you are looking for