Process Execute infopackage ,variant 0salesorg _text has status cancelled(i

Hi All,
i am loading thr master data.but load was failed.failed request is showing " process Execute infopackage ,variant 0salesorg _text has status cancelled(instances).why this error is comimg frequentely.i want know the reson.how can i solve this issue.please help me.
Thanks,
chandu

The job would have ben manually cancelled by the user.
It can also be some shortdump,check ST22
Else could be due to communication failures.
Connection problem.
To check for the connection,Goto RSA1-> source system,
select ur source and right click and check.

Similar Messages

Process Execute InfoPackage, variant 2LIS_12_VCHDR Delta Upload 2 has statu

Hi All,
i am loading trx data.but load was failed.failed request is showing " Process Execute InfoPackage, variant 2LIS_12_VCHDR Delta Upload 2 has status Ended with errors (instance REQU_4B9BAQK7NIXFRH9RKD0VF5LWP). why this error is comimg frequentely.i want to know the reason and how can i solve this issue? please help me.
Thanks,
Turan

Hi Turan,
Can you send the details error from DETAILS tab ?see all the process levels like Requsets,Extraction,Transfer& processing .
Regards
Pcrao.

Attribute Change Run" process cannot precede process "Execute InfoPackage

hi all,
i have changed process chain, after changing the chain i have click the check button and activated. then iam getting this error
A type "Attribute Change Run" process cannot precede process "Execute InfoPackage" var. ZPAK_C0BVLUDKPEPXGXFMHQ67RFI9L in the chain.
please help me out
thanks advance
sudheer.

Hi,
Your process chain shud have the following sequence:
Start Process> Loading of master data> AND process (if u have multiple master loads)-->Attribute Change Run
And all the linkages between the processes shud only be "SUCCESSFUL". Create new variants for all processes you enter in your process chain.
Check you chain before you activate. If it gives you exlamatory sign, the also u can go ahead with activation as it is giving u just the warnings.....
Hope it'll help u.......
Preet

Embedded links in emails willl not process by firefox mesage says " operation has been canceled due to restrictions in place on this computer"

Imbeded links will not process on Firefox: I receive this screen: "operation has been canceled due to restrictions in place on this computer"

Hi,
ahla.org redirects to
https://www.healthlawyers.org/Pages/home.aspx
... its a mess
eg. the login link is http://admin.healthlawyers.org:8080/_login
any error message with "Restriction" in it is from Group Policy.
what you can try
Tools>Internet Options>Security tab, click "Reset all zones to default"
Trusted Sites icon, sites button, remove ANY reference to
http://ahla.org or http(s)://www.healthlawyers.org (IE has security restrictions preventing navigation between sites of lower integrity).... Other userAgents do not use the same security model as MSIE.
the https protocol (secure web sites) works in any IE security zone.... If a site uses https, you do not have to place it in the Trusted sites list. It should work (encrypt) just as well in the internet zone (default).
Hover the mouse over the pdf/doc hyperlink... its uri will appear in the status bar or at the bottom of the IE window... note its address. IT MUST point to the healthlawers.org domain. It should also be using the same protocol as the current web page. If it
uses the https protocol, check "Internet Options>Advanced tab, uncheck "Do not save encrypted files to disk"
As I said.... it is likely that the above settings are controlled by Group Policy.
Rob^_^

Process Chain Master Data Failed.Showing Entire chain has status R

Hi,
Everyday SDMasterChain is running successfully.
Today one of the localChain or subchain has failed.
I have noticed that it has failed because last delta for one infoPackage has not yet completed and chain showing status "Entire chain now has status 'R'"
Can anybody resolve the issue?
Below is te log for the error.
Job started
Step 001 started (program RSPROCESS, variant &0000000113991, user ID ALEREMOTE)
Last delta upload not yet completed. Cancel
Data saved successfully
Start InfoPackage ZPAK_3VB5JI5I0N6QJ7RFSFU7Z3PF2
Last delta upload not yet completed. Cancel
Last delta upload not yet completed. Cancel
InfoPackage ZPAK_3VB5JI5I0N6QJ7RFSFU7Z3PF2 created request
Request REQU_449HFL0OFD22BSU2GX1X2MJJJ could not be generated with InfoPackage REQU_449HFL0OFD22BSU2GX1X2MJJJ without errors
Last delta upload not yet completed. Cancel
Error After Starting InfoPackage ZPAK_3VB5JI5I0N6QJ7RFSFU7Z3PF2 in Process Chain
Entire chain now has status 'R'
Process Attribute Change Run, variant Compounding Object has status Undefined (instance )
Process Save Hierarchy, variant Generated from LOADING ZPAK_3VBSFASA7NWCNP1JX9WXI5 has status Undefined (instance )
Process Execute InfoPackage, variant 0CUST_SALES_ATTR - Full has status Undefined (instance )
Process Execute InfoPackage, variant 0CUST_SALES_TEXT has status Undefined (instance )
Process Execute InfoPackage, variant 0CUST_SALES_TID_LKDH_HIER has status Undefined (instance )
Process Execute InfoPackage, variant ZMAT_SALET - TEXT has status Undefined (instance )
Process Start Process, variant Bekaert Master Data Loads - Start Variant has status Undefined (instance 449HEDPDI8N6AP5XKDUODJS6N)
Process Execute InfoPackage, variant Load from 0MAT_SALES_ATTR into ZMAT_SALE has status Undefined (instance REQU_449HB4K9K3W7GPJEF52YM83N3)
Process Execute InfoPackage, variant Load from 0MAT_SALES_TEXT into ZMAT_SALE has status Undefined (instance REQU_449HJOO6322QV09OL73P18ODR)
Process Execute InfoPackage, variant ZMAT_SALEM - ATTR - FULL has status Undefined (instance REQU_449HEJW4S44QAUTY9LQKH4QY7)
Process Execute InfoPackage, variant Delta load from 0MAT_PLANT_ATTR into 0MAT_PLANT has status Undefined (instance REQU_449HFL0OFD22BSU2GX1X2MJJJ)
Termination of chain has been reported to meta chain 449CKM1O64AHRLQJLNZ2GBWQ7
Message sent successfully
Job finished
Rgds,
CV.

Hi,
There are times when Master Data load compel us to do Re-Init. I guess you need a Re-Init.
Check theses links:
1: Re: Update mode R is not supported by the extraction API
2: pl help me with repeat delta for text info object
Regards
Happy Tony

"Attribute Change Run" process has to follow process "Execute InfoPack

Hi All,
i created process chain for M.D SD area. here i created start varient, then execute info package process created and when i am checking that it showing some warning message like ....
A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.ZPAK_4B9B5FH2BTQJOBTBAWHVM5ZY2 in the chain.
Here i can't understand what i have to do....
Any inputs for this...........
Thanx in Advance
Subbu.

hi,
Check master data objects in both process types "Excute info package" after start varianet and in attribut echange run process type.
Both should match or system will throw error message.
The concept is like Attribute change run has to run when ever new data is loaded to master data attributes.
Regards,
Arun Thangaraj

Process chain Problem "Process Activate DSO,ZDSO_01 has status with error"

hi,
i have found the problem of activation of ODS .
problem is something like
" Request REQU_49K5C78KK17M6JTUD3Y773YXC(3,860) has not or not correctly been updated; Please edit"
"Activation of M records from DataStore object ZDSO_01 terminated"
"Process Activate DataStore Object Data, variant Aktiviere Daten ZDSO_01 has status Ended with errors (instance ODSA_49K5E1DRU05C
Please reply me as soon as possible.

Hi Viral,
Delete ur requests and try to laod them again.
Try to find the detailed error message which u can find the process monitor --> Status page --> step by step analysis.
So that you can get more information regarding ur error.
Regards,
Rajkandula

Insert Execute infopackage on process chain maintenance

Hy, i have a serious problem: i can't insert a infopackage on process chain that i created on AWB.
When drag the insert "Execute infopackage process" on process chain and select the match code or F4 button to select an infopackage , receive this message:No data selected.So i can't insert infopackage in my process chain.
Could you help me?
Thank's a lot.
Sincerely yours
Andrea Maraviglia

Hi,
Go to rspc. At top of left pane you can see a data target icon. Click on that. Select your data target. Check the infopackage ckeck box. Here you can select your infopackage.
Try this out.
Regards,
Amruth

Process chain program variant will not change from yellow...

Hello,
Problem:
I have a process chain that has two branches with 3 process chain variants on each leg in a parallel configuration. The process chain variants run different program variants. I am using variant object called "ABAP Program with Success/Failure " which can have a yellow, green, or red status and has status arrows that can be either red or green that connect to other process chain variants. The program executed with these variants is a customized BPS UPC_BUNDLE_EXECUTE program. When I run this PC the first variant on each leg usually hangs indefinitley on the yellow status. In the Backg tab log (double click PC variant in Log View) I can see the various SQL code that was ran. The last line of the log is an SQL-END:... Sometimes it will get past the first 2 varaints and hang on the next set of 2. Other times it will just hang on the last variant of one leg. It is very sporadic.
What I have observed and tried:
If I check my SM51 for the server the chain is running on I can see that the program in question is not running. If I run the same program through SE38 that runs via a PC variant it runs sucessfully in an appropriate amount of time. If I kill the process that has been running indefinitley through SM51 the process chain variant will go from a yellow status to a red as expected.
I changed they way I ran the programs from running in parallel in 2 legs to running all of them in one leg serially. That did not work. At least one program variant will hang on the yellow status.
I replaced all the variants using "ABAP Program with Success/Failure" to "ABAP Program" which has a red/green status but no red or green arrows, but black coming out of the variant forcing it to move down the chain on a sucess or failure. The process chain variants also hung in the yellow status using the "ABAP Program" variant.
I have tried starting the process chain using both "Direct Scheduling" with "Immediate" and "After Event." I have also kicked it off using "Start Using Meta Chain or API" so it was functioning as a sub process chain. Programs were still yellow in every case without changing to red or green.
I created new process chain variants for every single program/variant that I am using. Still no luck.
I have tried removing the chain from the schedule and re-activating and re-running and still no luck.
Thanks in advance,
Gary Martins

bump

Error while executing infopackage of 2lis_03_bx

Hi,
I am using a multiprovider which gets data from 3 cubes OIC_C03 ,ORT_C37 and my customized ZRT_C37.
When i am executing infopackage 2LIS_03_BX(Stock Initialization) which updates data into three specified cubes , its giving me below specified error
"Cannot select cube OIC_C03 for full data from DataSource 2LIS_03_BX"
I have tried with both updates 1. Full update
2. Generate Initial Status
I have also deleted and fill setup tables for inventory.
If i remove 0IC_C03 from datatargets den i am getting error for other cubes
"Cannot select cube ORT_C37 for full data from DataSource 2LIS_03_BX"
With regards,
Montz

I am assuming that you are using BW 3.x
The error suggest your Cube has not bee properly connected to datasource. check that all intermediate things like update rule, infousource etc (between datasource and the cube) are in place and activated. Also check that cube is activated.

Process chain Activation Variant failed

Dear Gurus
In BI7 executed a process chain,in this ods activation is in 4 th step,turned in to red,i repeated and got executed.
Questions:
1.I checked in DSO all data got activated,only in process chain showed red status....how it is possible.
2.Eventhough 4th step turned in to red,below all (5,6,7...th steps) went through,how it happened,if some variants failed means next variant should not get executed?
3.When i did repeat it thrown ABAP debugging screen,i executed and went through well,ods activation variant became green.
When i was trying to see display message,it is empty no error message.
Root cause analysis i should give...pls how and where to do the analysis.....
Thanks and regards
T.Gadhatharan

Hi,
1.I checked in DSO all data got activated,only in process chain showed red status....how it is possible.
In the ODS Activation Process, is there any other ODSs existed for activation?
2.Eventhough 4th step turned in to red,below all (5,6,7...th steps) went through,how it happened,if some variants failed means next variant should not get executed?
After the 4th Step, the further processes executed means, they might have put the settings as Success or failure of the predecessor process it can through the further 5th, 6th and 7th processes.
3.When i did repeat it thrown ABAP debugging screen,i executed and went through well,ods activation variant became green.
Check for short dumps ST22.
Hope it helps.
Veerendra.

Execute Infopackage Through BAPI Using Excel Macro (BAPI_IPAK_START)

Hi everyone,
I have a problem when execute infopackage through BAPI using excel macro. I have create a button in macro. When this button is clicked, BAPI for trigger InfoPackage will executed (BAPI_IPAK_START) and this button will disabled.
After this process completely done (traffic indicator for the request is green in update rules), the button will enabled again.
Here the subroutine or pseudocode that i will write :
Private Sub ClickButton()
Begin
1. ThisButton.Activated = False --> Disabled Button
2. Call BAPI/custom Function Module to execute InfoPackage (BAPI_IPAK_START)
4. ThisButton.Activated = True --> Enabled Button
End
The problem is i need some statement like this between statement no 2 and statement no 4
Statement That I Want :
3. Wait Until BAPI Execute Completely
So user can click this button again only after the process is finished completely. I don't know how to do this in macro (in ABAP i know i can use "WAIT ... SECOND"), others said this can be done using event in schedule option at infopackage. Anyone,please help me.
Thank you.
Regards,
Satria B

Enter that req number in RSRQ and monitor the load
or right click on the DS - manage - you will req in yellow status which is in progress and you can click on the ...takes you monitor screen
Edited by: Srinivas on Jul 6, 2010 7:51 AM

How to create process chains, infopackage groups & Meta chains

Hi,
can anyone explain me about process chains,infopackage groups & Meta chains.
if possible give me examples for each.
Thanks & Regards,
cheta

Metachain
Steps for Metachain :
1. Start ( In this variant set ur schedule times for this metachain )
2.Local Process Chain 1 ( Say its a master data process chain - Get into the start variant of this chain ( Sub chain - like any other chain ) and check the second radio button " Start using metachain or API " )
3.Local Process Chain 2 ( Say its a transaction data process chain do the same as in step 2 )
Steps for Process Chains in BI 7.0 for a Cube.
1. Start
2. Execute Infopackage
3. Delete Indexes for Cube
4.Execute DTP
5. Create Indexes for Cube
For DSO
1. Start
2. Execute Infopackage
3. Execute DTP
5. Activate DSO
For an IO
1. Start
2.Execute infopackage
3.Execute DTP
4.Attribute Change Run
Data to Cube thru a DSO
1. Start
2. Execute Infopackage ( loads till psa )
3.Execute DTP ( to load DSO frm PSA )
4.Activate DSO
5.Further Processing
6.Delete Indexes for Cube
7.Execute DTP ( to load Cube frm DSO )
8.Create Indexes for Cube
3.X
Master loading ( Attr, Text, Hierarchies )
Steps :
1.Start
2. Execute Infopackage ( say if you are loading 2 IO's just have them all parallel )
3.You might want to load in seq - Attributes - Texts - Hierarchies
4.And ( Connecting all Infopackages )
5.Attribute Change Run ( add all relevant IO's ).
Start
Infopackge1A(Attr)|Infopackge2A(Attr)
Infopackge1B(Txts)|Infopackge2B(Txts)
/_____________________|
Infopackge1C(Txts)______|
\_____________________|
\___________________|
__\___________________|
___\__________________|
______ And Processer_ ( Connect Infopackge1C & Infopackge2B )
__________|__________
Attribute Change Run ( Add Infobject 1 & Infoobject 2 to this variant )
1. Start
2. Delete Indexes for Cube
3. Execute Infopackage
4.Create Indexes for Cube
For DSO
1. Start
2. Execute Infopackage
3. Activate DSO
For an IO
1.Start
2.Execute infopackage
3.Attribute Change Run
Data to Cube thru a DSO
1. Start
2. Execute Infopackage
3.Activate DSO
5.Further Processing
6.Delete Indexes for Cube
7.Execute Infopackage
8.Create Indexes for Cube

Process order with variant configuration material

Hi,
I create a process order for a material XX.
This material has a BOM with a material that has variant configuration "class type 300" for price configuration.
When I save the process order I get a message saying "There are still characteristics for components to evaluate". I dont want to evaluate this material in my process order.
What can I do to not have this message?
Regards.

Hi all,
Yes, I work with variant configuration. But sales orders are not involved.
What I do is:
1) I create a purchase order for material X (this material belongs to a BOM), this material has variant configuration. I give a value to the characteristics in the PO.
2) I create a process for a material XXX that has a BOM (material X is in the BOM and cannot be removed).
3) When I save the process order the system asks me to evaluate again the characteristics. This is what I dont want it to do.
Any ideas?
Regards.
Eduardo

Failure Writing file...Report processing has been canceled by user

I'm having a bit of an odd issue. In my SCOM environment I have 8 scheduled reports that management likes to look at. 7 of them are working just fine, however one of them keeps failing with the status:
"Failure writing file <file name> : Report processing has been canceled by the user."
Now this report is running every Sunday at 2:30 AM and I can assure you I am not up administering reports at 2:30 am on a Sunday.
Except for the file name this is set up identically to one of the reports that is working fine. If I write click and "run" the report it generates, though it takes a few minutes, and I can save it as an excel file to where we want it. There's nothing
in the event log around the time it says it last ran (2:30:03 AM).
Any ideas?

Hi Dave,
Could be conflicting with this built maintenance at 2:30am:
There is a rule in the System Center Internal Library called "Optimize Indexes". This rule runs every night at 2:30am on the RMS and calls p_OptimizeIndexes. Make sure any standard maintenance you perform on the OpsMgr DB does not interfere
with this job.
http://blogs.technet.com/b/kevinholman/archive/2008/04/12/what-sql-maintenance-should-i-perform-on-my-opsmgr-databases.aspx
Did you look at SQL Reporting Services Logs?
As well, you can try to change the Report Execution TimeOut in Report Manager.
Natalya

Process Execute infopackage ,variant 0salesorg _text has status cancelled(i

Similar Messages

Maybe you are looking for