Process file after file / not all files at the same time

Hi There,
i have a new Problem with our XI Systems.
We process XML Files.. they come in a folder on the Server.. from there the Engine takes it and processes the message.
This works so:
In the folder /xyz/ comes a XML File... File1.xml
After 2 Minutes the XI System takes the messages and proccess it. The Engine then move the file to Folder /archive/
Another two minutes later a new file comes in to the Folder /xyz/ File2.xml
File2.xml change now data that comed with File1.xml
and two minutes later the Engine processes the message
and so on and on....
My problem is now.. when i put File1.xml and File2.xml in the Folder /xyz/ at the same time.. the Engine processes the Messages at the same time.. and inconsistencys comes into my system.
So what i want is:
I Put File1.xml and File2.xml into the same folder.. then the Engine comes and Process first File1.xml and when this finished the System proccesses File2.xml
Do you know what i mean?
Eventually someone has a solution for my question?
Thanks
Bjoern

OK. I found now in the INtegration Builder the Point as you can see in the Screenhot here:
http://img253.imageshack.us/my.php?image=58047457ux6.jpg
But my Problem is that i dont know exactly which queue i have to take..
In SXMB_ADM i found the following queues:
http://img253.imageshack.us/my.php?image=57846606uq4.jpg
And in the SXMB_MONI i see the following for messages:
http://img111.imageshack.us/my.php?image=47303569tg7.jpg
From the screenshots above, can you tell me which queue i have to take?
Or did i have to take the Queue that comes automatically when i choose EOIO?!
Thanks
Bjoern
Edited by: bjoern bayerschmidt on Dec 18, 2008 2:17 PM

Similar Messages

My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested. How can there be audio issue for all these devices at the same time?
As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
Peace,
P. Dreadie

On I-Mac, how can I close all tabs at the same time?

On I-Mac, how can I close all tabs at the same time?
I use Mozilla Firefox for internet.

Not an Apple product, have you visited:
https://support.mozilla.org/en-US/kb/keyboard-shortcuts-perform-firefox-tasks-qu ickly

IPVC-3511-MCU - Can't see all persions at the same time on conference

Hello,
I can't see all persion at the same time on conference. I also can't see seperate screen on LCD pannel or CVTA on PC.
Does IPVC-3511-MCU support multiple conference with multiple video screen?
Regards,
John.

Hi -
This feature is called continuous presence - there are a number of references on Cisco's web site for the 3511. Here is one - http://www.cisco.com/en/US/customer/products/hw/video/ps1870/products_administration_guide_chapter09186a00804fc993.html and possibly another - http://www.cisco.com/en/US/customer/products/hw/video/ps1870/products_data_sheet0900aecd801c5e66.html
You did not mention the release of the 3511 software you are running. Knowing that might help too.
Ginger

How to change drill filter values of all reports at the same time

Hi,
The Webintelligence users in our environment usuallly use drill filters in their document's reports. We'd like to find a way to change the drill filters' values of all reports when one value is selected. I mean, we need a work around to change the drill filters of all reports at the same time.
We are using Business Objects XI 3.1 (a lot of webintelligence documents available, over than 2500).
Does someone know a way to do that? I've already looked for that a lot, but I couldn't find anything.
Thanks in advance,
Gustavo Borges

Hello Gustavo,
as you refer to a Webi problem I recommend to post this query to the [BusinessObjects Web Intelligence|SAP BusinessObjects Web Intelligence; forum.
This forum is dedicated to topics related to the creation and design of Web Intelligence documents using the Web Intelligence Report Panels. This includes areas such as universe connectivity, prompts, charting, formatting, filters, and formulas.
It is monitored by qualified technicians and you will get a faster response there.
Also, all Webi queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Upadting all articles at the same time?

is there a way of upadting all articles at the same time? I have like 64 articles in one folio and I dont see a way of updating them in the folio builder all at once, I have to click on every article and choose update in the Folio Builder, then wait, then click on another, update and wait....

That will definitely be a relief
BTW, when I import several articles, I sometimes lose the links to internal pages inside articles ("go to page 3"). Is that a known issue?
Updating articles is the cure, but it's a pain when I have to do that 25 times...

Two effects concurrently? all together. at the same time?

So- I'm trying to have three effects happen at once. quick Fade in- outline float - then slow fade out.
the fade in is the only thing that looks how i want it to. it fades in evenly all at once. The fade out fades from screen left to screen right. is that because I have it as a long-long slow fade? Can I make it fade all at once instead of left to right?
I'm having the text fade and after a few seconds of fadeing the outline float kicks in. so both efects are supposed to happen at the same time. am i asking too much?
I made the outline white, so I should be able to see it flow upwards. thats not the case when I import to fcp. but i do see it happen in the canvas window in live type. Is there something else I need to do in order to see this effect?

DaNam and Bogie offer solid advice.
And it's the cancel out message from Bogie that doesn't allow you to have the white outline float up.
To achieve that you need to select your text in the timeline.
In the Inspector click on the Style Tab then Outline and click the Enable box. Then change the color to white and this will allow your outline to be white in both LT and FCP.
Good luck

How to display all layers at the same time?

Hi,
I have created several theme based FOIs with a checkbox to set visible them. Each theme has some data and when you click in the theme region it displays this data in an information box. But when I set visible more than one theme, can only display the information box of the last one theme that I set visible (the others are not clickable because they are under the last no?). Is there anyway to make all of them clickable at the same time?
For each theme that I create I call this function:
 function addThemeBasedFOI(value, i) {
 /* Add JDBC SQL Query theme based FOI */
 baseQuery = "SELECT value,annotation as label FROM " + value;
 var theme = "<themes><theme name='JDBC_THEME'>"
 + "<jdbc_query asis='true' spatial_column='value' jdbc_srid='4326' label_column='label' " +
 "render_style='colorScheme' datasource='DSTest'>"
 + baseQuery + "</jdbc_query></theme></themes>";
 buffertheme = new MVThemeBasedFOI('bufferthemeL_' + i, theme);
 buffertheme.addStyle(sc1);
 buffertheme.enableLabels(true);
 buffertheme.setBringToTopOnMouseOver(true);
 buffertheme.setVisible(false);
 buffertheme.setClickable(true);
 buffertheme.enableInfoWindow(true);
 buffertheme.setAutoRefresh(true);
 buffertheme.attachEventListener(MVEvent.MOUSE_CLICK, showInfoPanel);
 mapview.addThemeBasedFOI(buffertheme);
 function showInfoPanel (loc, foi){
 var width = 250;
 var height = 150;
 var html = "Name: " + foi.name + " Localization: X:" + loc.getPointX() + " Y:" + loc.getPointY() + "";
 mapview.displayInfoWindow(loc, html, width, height, "MVInfoWindowStyle4");
/* Function to set visible a layer */
function setVisible(item) {
 var themebasedfoi = mapview.getThemeBasedFOI(item.value);
 themebasedfoi.setVisible(!themebasedfoi.isVisible());
 if(themebasedfoi.isVisible()) {
 themebasedfoi.centerToTheme();
 themebasedfoi.zoomToTheme();
Thanks in advance,
Esteban.

Hi Esteban,
pls refer to these threads - they may help you with that issue:
Re: MVThemeBasedFOI Index
MapViewer and WMS layers
Dominik

Can I have the dock show up on all monitors at the same time

As the topic beckons ... is it possible to have the dock show up on all connected monitors at the same time ?
Currently I have a setup with 2 external monitors apart from the main iMac monitor. Both external monitors are connected via thunderbolt and I'm running MacOS 10.9.4.
I know I can get the dock to appear on any of the external monitors by hovering with the mouse on the secondary/tertiary monitors where the dock "should" be, after a few seconds the dock appears. However I'm looking to have the dock present at all times on all monitors, with each monitor running separate spaces, nothing mirrored or duplicated.
Thanks in advance.

If you want this split screen thingy for a single app, do like captfred suggests or see if the app itself supports some sort of splitting, like MS Excel.
If you want to do this system-wide, maybe you can get what you want by activating and using Spaces: http://support.apple.com/kb/PH4313

Microphone and what U hear can not be use at the same time at the same time

I am using Creative SB X-fi Xtreme Gamer (Creative Model Number: SB073A), sound card and have down loaded the latest drivers (version 2.18.15). What U hear is enabled, which in turned makes the microphone unavailable. If you reverse the settings, then what U hear is unavailable.
It appears that; microphone and "What U Hear" can't be enabled at the same time. If someone has an answer on how to correct the following settings to achieve; using the microphone and what U hear at the same time would be appreciated.
My OS is WIN 7x32

It was possible in Windows XP but due to windows 7 own audio mixer this does not work anymore.

Apple Remote works all Computers at the same time when i don't want it too

Hi I have a Mac mini on my TV and imac and MBA on my desk if i use the apple remote for my mac mini it operates all of the machines at the same time can i stop this ?

Have you 'paired' the remote to a specific computer?
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8993.html

I have a Windows 8.1 system, I am trying to use the link that customer support gave me earlier to download CS6 Design and Web premium. I did the 1hour and 40 minute downlaod but when i try the second download file it says not all file wre archive. Anyone

How do I fix. after downloading says I need to download all parts and pieces are missing.

you need files 1 of 2 and 2 of 2, an exe and a 7z. download both, place both in the same directory and double click the exe.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

All downloads through Firefox are not opening correctly. Bookmarks open up a page with links flush left down the page that do not work. All file downloads do not open correctly with the same issue as bookmarks. Want to avoid losing all my bookmarks so don

Something happened in the last day with FF. IE downloads files correctly. FF Delicious bookmarks open up a page with blue links that look like an outline but they are not my links. My downloads do the same. No virus.

That can be caused by having some bookmarks with a long title in the main Bookmarks menu.
The width of a column in the Bookmarks menu list is in current Firefox versions automatically adjusted to fit the bookmark with the longest name.
You can check the names of the bookmarks and make the longer ones shorter.

Black lines not all showing up the same color when exported as any type file

Hi everyone,
I could really use some help as this is driving me crazy! Whenever I upload my Illustrator file with my logo online or export my logo as any type of file, certain black lines are lighter than others. I checked in Illustrator by clicking the lines that were showing up different shades when exported and all have the same #000000.
Does anyone have any ideas what I'm doing wrong?
Thanks!

Unfortunately my file is set up like a hot mess. Everything is in the same layer and I should have definitely done multiple ones. This is only the second logo I've designed and I'm learning as I go. Basically I did an image trace of the drawing and then went back and manually fixed lines. Instead of having only a few to select I have many all in the same layer as my color.
I noticed my vector logo works fine when exported. It's the files where I am resizing it that are coming up in the different colors.

File exists and dosn't exist on the same time ???

Hello there
So here is my Problem:
I want to read a file from disk and for that reason I created a buffered reader, with the reading there is no problem. The problem is the way I access this file. I set the property user.dir to the directory of the file (this is necessery for keeping my application dynamic) (it isn't part of the classpath). Then I give over to the method that reads it the name of the file as a string. There I create a new File object with this code:
File diskFile = new File ( theNameAsString );
(The diskFile is later given to the FileReader..)
Now when I let print out the absolutePath the path is correct. But if I try:
diskFile.exists( );
the result is "false"
So I tried it an other way by instanciating the diskFile as follows:
diskFile = new File ( "fullQualifiedPath" );
The result of printing out the diskFile.getAbsolutePath( ); shows exactly the same as before, but if I try:
diskFile.exists( );
the result is "true"
and this time there is no FileNotFoundException
So what is wrong with the first way I try to access the file?
I hope you all can understand what I try to explain...
Thank you, Alex

I'm thinking you may have a file name problem of some kind. Try this,
File diskFile = new File ( theNameAsString );
String fullName = diskFile.getAbsolutePath();
File anotherLookAtTheSameFile = new File(fullName);
Then try to see if anotherLookAtTheSameFile.exists() is true. I suspect it will not be. If it is, then it is likely that the "user.dir" property is changing between the time you instantiated 'diskFile' and the time you go to actually read the file. If it is, you could use 'anotherLookAtTheSameFile' instead of diskFile.
Hope this helps.

Lion won't copy files to multiple external hard drives at the same time

Hi there,
I upgraded my OS to Lion receently and I've noticed a bit of odd 'bug'
I want to copy the same files/directories from my Mac to my 2 external USB hard drives, but I find that Lion only lets me copy the files one hard drive at a time and not simultaniously, whereas Leopard/ Snow Leopard would let copy the files over simultaniously.
Has anyone else noticed this and is there a fix? I'm a photographer so I need 2 backups of the photographs I take and it's really annyoing that I can't transfer files simultaniously.
I always use Lacie hard drives and I've also noticed the same thing with my WD hard drives. All of my externals have been indexed and at Mac formatted.
Any help would be apprecated.

By the way- I did create an Automator workflow to copy files to drives, and then I just use two copies of that workflow, and everything works fine. But I should just be able to drag and drop, this is not an elegant solution to a simple finder issue ...
Download the workflow here: http://www.ryanewalters.com/downloads/DualCopy.zip

Process file after file / not all files at the same time

Similar Messages

Maybe you are looking for