Process flow of loan taken with Partial Disbursement

Hi,
Any one tell me about Business Process of Loan taken with partial disbursement
Commitment capital: 100000
firstly partial disbursement : 25000 without incidental cost
second disbursement: 75000
after that I manage all the disbursement in one contract (To manage interest payable, repayment)
Thanks and best regards
Ms.Minh

Please clarify what exactly would you like to know.
after partial/full disbursment loan is being serviced through it's ordinary life cycle.
In general you have to:
- post interest and charges on the monthly/quarterly basis (subject to your particular loan conditions),
- post interest accrual/deferral (if applicable),
- process loan repayment,
- after loan is fully repaid - close the contract.

Similar Messages

Elements 9 does not accept or process RAW photo images taken with a Nikon D7000.

Adobe elements 9 does not accept or process RAW photo images taken with a Nikon D7000. I called support for a download patch and they said I had to purchase a support package or essentially purchase Elements 10. I can't believe that Adobe would not have a download patch for this problem as my elements 9 is not very old. When I try to do the updates Adobe says the serial number of the elements 9 is not accepted for download or support even though I purchased it and registered it with Adobe.
Is there any solution to this?
Thanks.

Thank you but still having a problem. I go to the edit menu>>help>>update>>check for updates and an update to 9.03 comes up as the only update, no camera raw update. It starts to download and then stops and says to close organizer and/or editor then starts back up and stops again saying "error installing this update. Close and contact customer support". When I called customer support earlier that's when they said they don't support 9 only v. 10 and did I want to buy support or a new program v10 to get camera raw processing for the Nikon D7000 RAW. Apparently I'm doing something wrong in the update procedure but don't know what. The camera raw version is 6.5 in my elements and understand that camera raw v. 6.7 is the update to process the images. Any ideas? If I uninstall and reinstall does the serial number still work on the reinstall?
Thanks for help.

Process flow - Active Directory integration with Enterprise Portal

Hi
I have seen number of documents/forum discussions on integrating Microsoft Active Directory (LDAP) with Enterprise Portal, but unable to find out the process flow for achieving the same.
I have installed Enterprise Portal 6 (SP13) running on Web AS 640 (J2EE Standalone). The UME is currently configured to use Java database. (i.e datasourceconfiguration_database_only.xml)
I intend to proceed as below for integrating with Active Directory and integrate with Windows authentication:
1) Configure UME to use an LDAP Server as Data Source using Config Tool
http://help.sap.com/saphelp_erp2004/helpdata/en/cc/cdd93f130f9115e10000000a155106/frameset.htm
2) Configure Enterprise Portal UME i.e http://<host name>:50000/irj - System Administration - System Configuration - UM Configuration
<b>Should I configure Data Sources & LDAP Server here as I have already configured these using J2EE Config tool (point no.1).</b>
3) Integrate Windows authentication with EP using IISProxy module.
I hope the above will enable me to logon to Portal without supplying username and password once you are logged on to the PC using your Windows user name and password.
Also, any schema updates required to Activie Directory i.e What additional data is stored in A.D.
I would appreciate your guidance on this.
Thanks in advance,
Chandu

Hi Chandau,
you wanted that some users are not taken into account by the User Management Engine (UME).
This behavior can be established by specifying the
ume.ldap.negative_user_filter property for the LDAP data sources in the data source configuration file. Using this property one can define that all users and accounts that
match the defined conditions are filtered out by the UME API.
A detailed documentation can be found in the SAP Online Help:
http://help.sap.com/saphelp_nw04/helpdata/en/9a/f43541b9cc4c0de10000000a1550b0/
content.htm
In the following example of a data source configuration file for Microsoft Active Directory
Server the attribute userPrincipalName is used as Logon ID of a portal user id (j_user).
Here the user accounts that have one of the following Logon IDs (index_service,
notificator_service and cmadmin_service ) are filtered out.
<dataSources>
</dataSource>
<dataSource id="CORP_LDAP">
<privateSection>
<ume.ldap.negative_user_filter>
userPrincipalName=[index_service,notificator_service,cmadmin_service]
</ume.ldap.negative_user_filter>
</privateSection>
</dataSource>
</dataSources>

Can PSE 12 open and process Camera Raw pictures taken with Canon GIX Mk. 2 camera?

I have bought a new Canon GI X Mk. 2 camera. I consider to update my Photoshop Elements 9 to new the newest 12 version, but I will only do that if the PSE 12 can manage Camera Raw pictures taken with my new camera. Can anyone help?

Yes, but you will have to install the Camera Raw 8.5 or later update. Go to Help > Updates to start the update process. You can verify what version of Camera Raw you have installed by going to Help (Win) or Photoshop Elements (Mac) > About Plug-in > Camera Raw.

Problem with copying Process Flows in OWB 10.2.0.1..

Hello
We have a complex process flow which runs fine. When we try to duplicate the process flow in design center by copy/paste operation, the new process flow seems to execute activities out of sequence. We tried saving/synchronizing the process flow (eact activity individually) with no luck.
We checked the repository browser and see all the activities and transitions in the right order. I looked at both OWB repository tables as well as Workflow tables/views. It just seems that the run time picks up the data in a different order and executes it.
Any idea on how to debug this?. We can't create each process flow from scratch every time we need to add new one which will be slightly different one from an existing process flow.
Thanks
Prakash

Find and read the thread about when queries take too long.
Something is different between the systems, possibly
* indexing
* volume of data
* connect-by structure in table data
* initialization or session settings

Process flow failes when executing a mapping by error ......

hi all,
When we executes a mapping through owb normally it works fine.
But the same when executes throgh a process flow it get falies with the f/w error.
*"Set based mode not supported ORA-06512"*
The operating mode is "set based fali over to row based"
In the mapping we are doing some transforamtion and putting the data in a flat file.
Please help in this reagrd.
Regards
ashok

Hi,
change in processflow configuration property OPERATING_MODE for this mapping to ROW_BASED or ROW_BASED_TARGET_ONLY
Hope this helps!

Find out type of activity in process flow

I am currently working on generating process flows. I place a bunch of mappings or sub process flows (sometimes more than 20) in a process flow. Then I connect them basically to indicate the order in which they have to be processed.
Next I want to generate the succes, warning and error transitions. I can easily list the activities in the process flow using
OMBRETRIEVE PROCESS_FLOW 'SOME_FLOW' GET ACTIVITIES
likewise I can easily retrieve the transitions.
My main problem now is that I cannot find where to start.
I know a process flow is created default with a START1 activity but the name can be changed, so that is not a fool proof option. I have been looking for something like
OMBRETRIEVE PROCESS_FLOW 'SOME_FLOW' ACTIVITY 'START1' GET PROPERTIES (ACTIVITY_TYPE)
But the property apparently does not exist.
If I do
OMBDESCRIBE CLASS_DEFINITION 'PROCESS_FLOW' GET CHILD_TYPES
I see a START_ACTIVITY child type is listed. Now I am looking for a way to connect the child type to the activity
Anybody ideas?
Thanks in advance,
Kind regards,
Eric.

Thanks Oleg,
After posting the question on the forum I remembered I had made lists of activities for various activity types, in my case MAPPINGS and SUBPROCESSES. So I tried the same for START activities, just like you apparently have done. And with the same conclusion; there is not a complete list of activity types you can use.
I also noticed there is no START activity in the Palette of the Process Flow editor. And that you cannot delete a start activity (API-10011 You cannot delete this type of activity). Apparently a start activity is a special case of activity. And I think I will treat it this way. I will assume no one in his right mind will rename this activity from it's default 'START1' name and start my exploration of the flow in the process there.
Thanks again for confirming my suspicions.
In the process of finding out activity types that are supported I made a list (OWB 10.2.0.3):
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET AND ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET ASSIGN ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET DATA_AUDITOR ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET EMAIL ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET END_ERROR ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET END_LOOP ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET END_SUCCESS ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET END_WARNING ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET FILE_EXISTS ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET FOR_LOOP ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET FORK ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET FTP ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET MANUAL ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET MAPPING ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET NOTIFICATION ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET OR ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET ROUTE ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET SET_STATUS ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET SQLPLUS ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET SUBPROCESS ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET TRANSFORMATION ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET USER_DEFINED ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET WAIT ACTIVITIES
OMBRETRIEVE PROCESS_FLOW 'EERSTE' GET WHILE_LOOP ACTIVITIES
Kind regards,
Eric.
Message was edited by:
ericb
Message was edited by:
ericb

OWB 9.2.0.4 Process Flows Validation and Export

Hi
I'm trying to export my OWB 9.2.0.4 repository into one mdl file in order to upgrade to OWB 10.2.0.4.
I have problems with exporting many of my Process Flow Packages but not all.
Here is one example:
Process Flows
Process Module (Davia)
Process Flow Package (DATAFLYT)
Process (DATAFLYT_AF_EDW_STAGE_OG_EDW)
I can validate at the Process level (DATAFLYT_AF_EDW_STAGE_OG_EDW) with Success.
I can validate at the Process Flow Package level (DATAFLYT) with Success.
When i Validate at the Process Module level (Davia), I get the following Validation error in the first Window:
"VLD-10008: Process flow DATAFLYT_AF_EDW_STAGE_OG_EDW does not have a location associated with it."
When looking in the "View Details" I get the following messaage:
"VLD-10008: DATAFLYT_AF_EDW_STAGE_OG_EDW's owning process flow installed module DAVIA does not have a location associated with it."
When looking in the "Message Editor" I get this message:
"NAME","STATUS","MESSAGE TYPE","MESSAGE","DETAILS"
"DATAFLYT (Process Flow Package)","Valid","SucMsgKey","VLD-0001: Validation completed successfully.","Validation completed successfully."
"DATAFLYT_AF_EDW_STAGE_OG_EDW (Process)","Valid","SucMsgKey","VLD-0001: Validation completed successfully.","Validation completed successfully."
In Deployment manager the column Location has the value "OWF_PRODUKTION" for all Objects.
I can Deploy the Process Flow Package (DATAFLYT) with Success.
I can make an Export to MDL when I stand at Process Flow Package (DATAFLYT) level.
End Result: Everything seems to work at the Process Flow Package level but not when Exporting at the Process Module level (Davia).
Peter Tougaard

user2918258 wrote:
Hi
I'm trying to export my OWB 9.2.0.4 repository into one mdl file in order to upgrade to OWB 10.2.0.4.
I have problems with exporting many of my Process Flow Packages but not all.
Here is one example:
Process Flows
Process Module (Davia)
Process Flow Package (DATAFLYT)
Process (DATAFLYT_AF_EDW_STAGE_OG_EDW)
I can validate at the Process level (DATAFLYT_AF_EDW_STAGE_OG_EDW) with Success.
I can validate at the Process Flow Package level (DATAFLYT) with Success.
When i Validate at the Process Module level (Davia), I get the following Validation error in the first Window:
"VLD-10008: Process flow DATAFLYT_AF_EDW_STAGE_OG_EDW does not have a location associated with it."
When looking in the "View Details" I get the following messaage:
"VLD-10008: DATAFLYT_AF_EDW_STAGE_OG_EDW's owning process flow installed module DAVIA does not have a location associated with it."
When looking in the "Message Editor" I get this message:
"NAME","STATUS","MESSAGE TYPE","MESSAGE","DETAILS"
"DATAFLYT (Process Flow Package)","Valid","SucMsgKey","VLD-0001: Validation completed successfully.","Validation completed successfully."
"DATAFLYT_AF_EDW_STAGE_OG_EDW (Process)","Valid","SucMsgKey","VLD-0001: Validation completed successfully.","Validation completed successfully."
In Deployment manager the column Location has the value "OWF_PRODUKTION" for all Objects.
I can Deploy the Process Flow Package (DATAFLYT) with Success.
I can make an Export to MDL when I stand at Process Flow Package (DATAFLYT) level.
End Result: Everything seems to work at the Process Flow Package level but not when Exporting at the Process Module level (Davia).
Peter Tougaard
i am not 100 sure but what works in OWB 9.2.0.4 might not work in OWB 10.2.0.4 in the same manner. There have been lot of changes between these versions so i am not very sure about compatibilty from 9.2 to 10.2, If you have exported your mapping and other stuff then without wasting too much time it is probably easier to re-create the process flows manually. This failure might be because some of the components/objects used in process flow of ver 9.2 might not be compatible with 10.2 or hvae been enhanced to work differently.

Process Flow Error: nonexistent LOB value

Hi,
I would like to send an email of all mapping statuses of the day. I created function to retrieve all messages from OWB$WB_RT_AUDIT_MESSAGE_LINES. Sometimes it works and another time it fails. After a little investigation I got the cause of this failure: length of the message exceed the limitation of VARCHAR2 (4000 bytes).
Then I created another function for testing as follows:
CREATE OR REPLACE FUNCTION FTEST_VAR RETURN CLOB IS
tmpVar CLOB;
BEGIN
tmpVar := 'test';
RETURN tmpVar;
END FTEST_VAR;
From SQLPlus I was able to query this function:
SQL>select ftest_var tst from dual;
TST
test
Then I created a process flow like this:
START1->FTEST_VAR->EMAIL->END_SUCCESS
In the process flow I created a variable EMAILBODY to bind to the output of FTEST_VAR and then bind EMAILBODY to the MESSAGE_BODY of the EMAIL.
I deployed and run the process flow. It failed with this error message:
ORA-22922: nonexistent LOB value
ORA-06512: at line 1
Could anybody please shed a light on this?
TIA
Prat

I am trying to setup pretty much the same type of flow to email job messages using a CLOB. Were you able to find a solution?
Thanks!

Process flow/map performance issues

We have some issues with our OWB-based application and we're looking to find out if there are different ways we could be using the tool, or features/options we've missed.
We are trying to maintain a near real time feed of data from a front end system into our warehouse which was built using OWB 10.2.0.3 over a 10.2.0.4 database. The bulk of the application consists of OWB maps with a few hand-written PL/SQL objects, all executed in a series of hierachical OWB process flows. Maps/transformations are executed either sequentially or in parallel where the referential integrity of the model allows.
The problem is that we have around 150 tables in the datamart which could potentially require updating on each refresh cycle, although in practice only a few tables have any activity on a typical refresh cycle. The cycle consists of loading data into a set of staging tables, and from there the data is transformed into the main schema, often with multiple maps per target table.
On every cycle we run hundreds of maps, the vast majority of which process zero rows. Each map runs quickly and efficiently in its own right but collectively they add up to a 5 - 10 min cycle even if there is no data to process.
There are 2 avenues which we'd like to explore and would be grateful if anyone could provide any pointers/suggestions :-
1) It appears that each map opens and closes its own database session when it executes. I presume this was done because a single process flow could be constructed with maps executing in different target schemas, but we know that's not the case for us. We'd like to know if there is anyway to configure the database connection at a higher level (eg. process flow) so it opens a connection once and executes each of the maps (database packages) in that one session.
Our DBAs are experimenting with 'shared server' settings at a database level which may help to some degree but won't be the whole story.
2) Another option is simply to run less maps eg. load the staging area as now, collate stats on which staging tables contain new data, and then apply some logic such that subsequent maps only execute if the relevant staging table(s) contain(s) some new data, otherwise bypass that map.
We tried experimenting with the 'Pre Mapping Process' operator, but essentially that just generates another function call from the map package, so we still have the overhead of opening a database session for each map to run the package. Minimal gain.
We thought about adding a function call in the process flow before each map and then branching to either execute/bypass the map as approriate, but the function call still requires opening/closing of a database session each time so, once again, minimal gain.
What we really want is some way for a map or process flow to check without logging onto the database repeatedly.
Any ideas on the above, or other potential solutions anyone could suggest, would be greatly appreciated.

Hi,
Please see if these documents help.
Note: 554635.1 - Create Accounting Process Performs Poorly When 100K + Distributions are Passed for an Event
Note: 954273.1 - Multiple Create Accounting Requests Result In Poor Performance For Online Accruals
Note: 763500.1 - R12: Performance Issue with Create Accounting
Note: 733637.1 - R12:Performance Issue When Running Accounting Program Xlaaccup
Note: 781311.1 - Create Accounting Process Taking A Long Time To Complete After Appying Critical Patches
Note: 557869.1 - EBS: R12 Oracle Financials Critical Patches
Regards,
Hussein

Error RPE-01008 and RPE-01003 if i execute a process flow

Hi,
if i execute a process flow, once the process flow worked fine. If i execute at another time the process flow didn't work with the following error messages:
RPE-01008: Wiederherstellung dieser Anforderung ist in Bearbeitung.
RPE-01003: Die Anforderung konnte wegen einer Infrastructure-Bedingung nicht abgeschlossen werden.
Any ideas?
thanks a lot

Have you tried any of previously reported errors on this forum to see if any of them relates to your case?

OWB 11.2.0.4: Process flows execute in parallel instead of serial

Hi all,
we migrated a 10gR2 repository (Linux) onto 11.2.0.4 and noticed a heavy error: the sub-processes which are supposed to execute serially (and did this in 10g) are started in parallel, so, that the whole dependency concept is destroyed. Prior to raise a SR I'm asking the community if such a behavior has been seen already. The process flow deployment was done with the brand new Windows client for 10.2.0.4.
best regards
Thomas

Hi Thomas,
Have you checked if you have problems with the transition order property? It was still present on 11.2 when the process flow was migrated from 10.2. Check this thread:
Re: owb process flow error handling
Regards
Ana GH

Deployment error during deployment of the process flow...

i have made a program using OMB to deploy an OWB process flow. i have used tcl programming to run it on UNIX.
when i run the program it gives me a strange error saying:
an unknown error has occured during deployment .
when i open the OWB design center to check the status i find the the process folw is stuck during the generation part and it continues but the generation never takes place.. for that i wrote an OMBALTER to alter the generation language of the mappings used in the process flow ,but it does not help...
also after the error in the program when i see the mapping through the desibn center i do not see the original mapping when i open the mapping editor.
then if I run the again program again i get the process flow deployed successfully ,obviously with the incorrect mappings.
can anybody plz help me out with it???

Hello!
I searched metalink on error RTC-5161 and found a reference in note 392263.1
It is a bug but there is a patch available ( bug 5504848, patch number 5525337).
Read the note on metalink to check if you really hit this bug and apply the patch.
Regards,
Robert

Audit browser showing complete for all process flows.

Hi,
My process flows are executing success fully.
Based upon the activities I am ending the process with END_SUCCESS, END_ERROR or END_WARNING acitivities.
But here even, the process flow is ended up with END_ERROR activitiy the process flow status is shown as 'Complete'. But its not showing the final status as "Error".
In the backend, in the audit tables its showing the return status as "Failure"
Could any one please explain me, how to show its status as fialure.
Thank you,
Regards,
Gowtham Sen.

Hi,
From your description, I know you do not want to close your browser when users sign out SharePoint 2013.
As you know, “the browser has to terminate the session and clear the cache.” You can customize your sign out page by referring to this article: https://controlzet.wordpress.com/2014/02/17/sharepoint-custom-sign-out-page/.
Best Regards
Vincent Han
TechNet Community Support

Materialized View Refresh; Process Flow

I was wondering if anyone has used process flow to refresh materialized view;
I am trying to use a process flow for this i.e. run something similiar to below
EXECUTE dbms_refresh.refresh('"ODW_SRC"."MV_SERVICE_DAILY_AUDIT"');
I am trying to avoid using DB scheduler because I want to make sure process flow doesn't clash with update of materialized view causing possible conflict of longer than expected job run time goes into refresh window.
I am assuming I could use a transformation and build it out; but I was wondering if there is an easier way in just executing this one line ... any idea's
Thank you in advance for your help

Sorry, I think the OWB term is post mapping process, its actually an operator in an OWB mapping where you can add a procedure call for example. The procedure can do pretty much what it wants.
Cheers
David

Process flow of loan taken with Partial Disbursement

Similar Messages

Maybe you are looking for