Process flow related to lis

Hi,
Where can i get sample or examples of process flow related to LIS in SD Module.
Please guide me.
Regards,
Vinod

Hi
Please check the following to access a pdf file on Reports and Analysis....
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SDISREP/SDISREP.pdf
This will give you a fair idea about the LIS...
Thanks,
Ravi

Similar Messages

End user process flow related to CIN

Hi
SAP experts
I would like to know what exactly the end user will follow for material postings
transactions ME21N, MIGO, PART1, PART2, MIRO etc and any more on part of MM?
Please explain me the path for postings and on which priority....
thanks&regards
venkat

Hi
Please check the following to access a pdf file on Reports and Analysis....
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SDISREP/SDISREP.pdf
This will give you a fair idea about the LIS...
Thanks,
Ravi

INFO Required related to FOOT wear process flow

HI
I Need the process flow of foot wear industry.
provide me the flow chart if possible (involving the different stages of manifacturing)
type of process equipments used in the process also.
-ashok

Ashok,
I tried to searchy and found below pages, pls go through it it may help you.
[http://mavicanet.com/directory/eng/17519.html]
[www.competition-commission.org.uk/rep_pub/reports/1970_1975/fulltext/069appendices.pdf]
Regards,
Shyamal

VPRS issue in STO - IC Billing process flow

Hi Experts,
I am working on following process flow (Stock transport PO - Delivery - Intercompany billing).
Same condition type ZIXX is maintained in MM & SD Pricing procedure. In PO (STO), ZIXX is determined based on material valuation data and the same amount gets copied to IC billing.
Along with ZIXX, we have VPRS condition type in billing pricing procedure. But issue is that: VPRS does not get determine. System analysis shows message 217 (error in quantity/ value determination for VPRS).
Meanwhile, condition amount for ZIXX (determined in PO) and VPRS (determined in IC billing) may differ in some of the business scenarios. So both condition types are needed.
Following settings have been maintained:
·         Copy control settings between delivery & IC billing document
o   Price source A (Purchase order)
o   Pricing type C (Copy manual pricing elements and redetermine others)
·         Item category (Intercompany) has marked for ‘Determine cost’ with billing relevance as A (delivery related billing)
·         Condition type VPRS
o   marked as G (Internal Price)
o   marked for ‘quantity conversion
o   marked as ‘statistical’ in billing pricing PP
o   subtotal B and requirement routine 4 (Cost)
·         Condition type ZIXX
o   Marked as G (Internal price) in MM Pricing procedure
o   Marked as H (Basic Price) in SD PP with requirement routine as 2 (item with pricing)
·         Material type is updated for ‘quantity and value update’ in SAP T.Code: OMS2
Kindly let me know, how we can resolve VPRS issue.

Hi Sachin,
For the similar issue you face, there has been a discussion in the forum.. Pls check
VPRS retrives the cost of the Material from the material master data > Accounting 1 tab to the Sales order.
Once the cost is found, then Profit margin (Net value - cost) is calculated.
VPRS does not contain any Access sequence.
With the help of its Condition category "G", it accesses the Material master > Accounting tab 1 and takes cost.
There may be two cost specified in the Material master. They are
- Moving Avarage Price
- Standard Price
Which one system will consider that depends upon the "Price control" field.
If the value is "V' in the Price control field, the system takes the "Moving Avarage Price" and if it is "S", then system takes the "Standard Price".
So, you must ensure these few control
- VPRS should NOT have any Access sequence.
- Condition category "G" must have been assigned to VPRS.
- VPRS must have been activated as "Statistical" condition in the Pricing Procedure and should not have any Account key.
With Regards
S.Siva

OWB-OWF - Process Flow Deployment - Database Link

Hello there,
This post is basically related to my problem with Process Flow deployment.
Could someone please shed some light on the following:
When we create a Process Flow, during this process OWF creates a Database Link. For some reason, this link is not functional unless I remove the part after "." in that defines the "HOST" in the DB Link definition. How do I know it is not functional - I know because following query does not work:
select * from [email protected]@WB_LK_WF_PKG
Here is the link definition:
ORIGINAL:
create database link OWB92TRG.US.ORACLE.COM@WB_LK_WF_PKG
connect to RR
identified by "<pwd>"
using '(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=CENTENNI-2077E4.CENTENNIALCOLLEGE.CA)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=OWB92TRG)))'
MODIFIED (it works - above query runs OK):
create database link OWB92TRG.US.ORACLE.COM@WB_LK_WF_PKG
connect to RR
identified by "<pwd>"
using '(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=CENTENNI-2077E4)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=OWB92TRG)))'
My second question is "using what userid/pwd should this link should have been created? Should it use "Runtime Repository Owner" or "OWB Repository Owner" or "Runtime Access User" or "OWF_MGR"?
No matter what userid I use, it works when I run the query but I always get following error when I try to deploy the "Process Flows" in OWB:
RPE-02085: Failed to test wb_rti_workflow_util.initialize through deployed Workflow Database Link OWB92TRG.US.ORACLE.COM@WB_LK_WF_PKG2. Please check that "EXECUTE ANY PROCEDURE" privilege is set and that the OWB Runtime is available.
- ORA-04052: error occurred when looking up remote object [email protected]@WB_LK_WF_PKG2
ORA-12545: Connect failed because target host or object does not exist
I have already granted the "EXECUTE ANY PROCEDURE" to OWF_MGR. I am not sure, though, what is meant by the "and that the OWB Runtime is available" part of the error message above.
I have also tried to fix this by running the "catrpc.sql" script but it did not help either.
I am stuck on this step for past few days. I would highly appreciate help in fixing this problem. Here is the configuration I am using:
o Source database : Oracle 9i (9.2) on my local PC
o Target database : Oracle 9i (9.2) on my local PC
o OWB 9i
o OWF 2.6.2
o OWB and OWF repositories are on the TARGET database
I am able to successfully deploy and run my MAPPINGs.
TIA,
Amer

Hello Oracle support,
Should I open a TAR to get this problem resolved?
Regards,
Amer

Error While Importing Process Flow in OWB Repository.

Hi All,
OWB Config Details is as follows:
Oracle 9i Warehouse Builder Client: 9.2.0.2.8
Oracle 9i Warehouse Builder Repository: 9.2.0.2.0
Following Error Message is displayed when i tried to import process flow from one OWB Repositoty to another OWB Repository.
Warning at line 23: MDL1312: Referenced logical location with name <PF_STG_INC_LOC> and UOID <F3940F1D5EB84985E0340003BA0AF737> not found for PROCESSMODULE <SALES_INC>. Logical location not set for this module.
Warning at line 28: MDL1320: PROCESS PF_C_C_CALLS_INC in STG_INC.SALES_INC.SAL_INC cannot be imported because referenced STANDALONEPROCEDURE
FLSTG.PROC_GET_ETL_DATA_DATE does not exist.
Warning at line 28: MDL1320: PROCESS PF_STG_CALL_CENTER_CALLS_INC in FLSTG_INC.SALES_INC.SAL_INC cannot be imported because referenced STANDALONEPROCEDURE
FL_TRG_FLSTG.PROC_UPDATE_RECO_CTL does not exist.
Informational: MDL1134: COMMIT issued at end of import data file.

Hello, all the errors you've been given are related to missing objects.
You should re-create/import the location for you process flows before importing the process flows themselves.
Also verify that you have imported the procedures FLSTG.PROC_GET_ETL_DATA_DATE and FL_TRG_FLSTG.PROC_UPDATE_RECO_CTL because you use them in your process flows so you need them: OWB refuses to import a process flows if some objects are missing because it would break some links.
In general process flows should be imported where you have all the other objects in the repository because they are the final step and they reference many other objects.
Hope this helps - Antonio

Error While Improting Process Flow in OWB Repository.

Hi All,
OWB Config Details is as follows:
Oracle 9i Warehouse Builder Client: 9.2.0.2.8
Oracle 9i Warehouse Builder Repository: 9.2.0.2.0
Following Error Message is displayed when i tried to import process flow from one OWB Repositoty to another OWB Repository.
Warning at line 23: MDL1312: Referenced logical location with name <PF_STG_INC_LOC> and UOID <F3940F1D5EB84985E0340003BA0AF737> not found for PROCESSMODULE <SALES_INC>. Logical location not set for this module.
Warning at line 28: MDL1320: PROCESS PF_C_C_CALLS_INC in STG_INC.SALES_INC.SAL_INC cannot be imported because referenced STANDALONEPROCEDURE
FLSTG.PROC_GET_ETL_DATA_DATE does not exist.
Warning at line 28: MDL1320: PROCESS PF_STG_CALL_CENTER_CALLS_INC in FLSTG_INC.SALES_INC.SAL_INC cannot be imported because referenced STANDALONEPROCEDURE
FL_TRG_FLSTG.PROC_UPDATE_RECO_CTL does not exist.
Informational: MDL1134: COMMIT issued at end of import data file.

Hello, all the errors you've been given are related to missing objects.
You should re-create/import the location for you process flows before importing the process flows themselves.
Also verify that you have imported the procedures FLSTG.PROC_GET_ETL_DATA_DATE and FL_TRG_FLSTG.PROC_UPDATE_RECO_CTL because you use them in your process flows so you need them: OWB refuses to import a process flows if some objects are missing because it would break some links.
In general process flows should be imported where you have all the other objects in the repository because they are the final step and they reference many other objects.
Hope this helps - Antonio

Ways of creating contract and process flow of contracts

hi friends
ways of creating contract and process flow of contracts
thanks for ur help
regards
krishna

hi,
In the MM Purchasing component, a contract is a type of outline purchase agreement against which release orders (releases) can be issued for agreed materials or services as and when required during a certain overall time-frame.
Contracts can take the following forms:
Quantity contracts
Use this type of contract if the total quantity to be ordered during the validity period of the contract is known in advance. The contract is regarded as fulfilled when release orders totaling a given quantity have been issued.
Value contracts
Use this type of contract if the total value of all release orders issued against the contract is not to exceed a certain predefined value. The contract is regarded as fulfilled when release orders totaling a given value have been issued.
You can also set up corporate buying contracts with your vendors. These are valid for all plants and company codes within a client (see Centrally Agreed Contract).
You can create a contract as follows:
Manually
You enter all data relating to the contract manually.
Using the referencing technique
As reference document (the document you copy from), you can use:
Purchase requisitions
RFQs/quotations
Other contracts
CREATION OF CONTRACT MANUALLY:
Choose Outline agreement --> Contract --> Create(ME31K)
The initial screen appears.
Enter the necessary data. If you make any specifications under the group heading Default data, this data will appear as the default data in each item.
In the Agreement type field, specify whether you are creating a quantity or value contract, for example.
Press ENTER .
The header data screen appears.
Enter the contract validity period. Check the other fields on this screen and make any necessary changes (e.g. the terms of payment) and define the header conditions.
Press ENTER .
The item overview screen appears.
On this screen, enter the information for each item (material number, target quantity, price, receiving plant, or account assignment, etc.) using the same procedure as with purchase orders.
Material without a master record: leave the field for the material number empty and enter the following:
u2013 Short description of the relevant material or service in the Short text field
u2013 Material group to which the material belongs, in the Material group field
u2013 Account assignment category
You can enter u (unknown) or the category of an account assignment.
u2013 The target quantity and the order unit
If you specify an account assignment category other than U (field A), you must enter the relevant account assignment data for the item. To do so, choose Item ® Account assignments (see also Account Assignment).
If necessary, review the details for each item. Select the item(s) to review. Then select Item -> Details.
Enter the desired conditions.
Enter further text for the item if any additional instructions to the vendor or Goods Receiving are necessary. Choose Item -> Texts -> Text overview.
Save the contract.
Hope it helps..
Regards
Priyanka.P
AWARD IF HELPFULL
Edited by: Priyanka Paltanwale on Aug 25, 2008 7:20 AM

Process flow of capital project and indirect project

Hi ,
Can anybody provide me some document related to the process flow of capital project and indirect projects .
Thanks/vinay

Hi Vinay,
If you found any document related to capital projects please share with me also.
Thanks
Sreenath

OWB Process Flow - How is the best version control tool ??

HI all,
I just start work with OWB and I have a question to know how is the best way to do something.
Imagine the scenario below:
If I have 2 or more requests for example:
Request 1: Create a Dimension City.
Request 2: Create a Dimension Products.
I Have ONE process flow and i need put my changes inside. This is my problem.
In my scenario I don't know what Request goes to Prod First.
If I put the Request 1 and Request 2 in my PROCESS FLOW, maybe I need change is someone decide change MY REQUEST PRIORITY.
There is something in OWB to "control the version or changes" ?? For a mapping I export the MDL and commit on SVN, but I dont know haw can i do with the process flow.
Something to agree multiples peoples work in different mappings and a SAME PROCESS FLOW ??
What is best way to work with process flow and version control.
What are the best practices when it comes to version control?
Thanks.

Amit,
Are you really doing this in 10.1.3.x and not 11g?
At any rate, I don't see how #2 and #3 relate whatsoever to your choice of a version control system. OK, maybe in #2 if there is some "maintenance" activity to be done against the version control server. Subversion is the open source alternative that you listed there and is pretty commonly used. If your company is already using one of the mentioned tools, why change? About the only thing I'd mention is to advise you NOT to use CVS for well documented reasons (JDev does support it) - if you would have picked CVS otherwise, choose Subversion. As far as question #1 - I've only used Subversion (well, I did use CVS for a while) with JDeveloper, so I can say it was "effective enough for me." In 10.1.3.x, I also used the external svn tools for doing lots of things like merging and so forth; in 11g, the support is much much better.
Best,
John

Process flow completed successfully but flagged as BUSY in OWB ?

Hi, I have several process flow jobs that are scheduled to run each night.
All steps of the process flows completes successfully (checked in Workflow Manager and Warehouse Builder Browser), but the overall status is always set to BUSY in OWB Browser.
I have seen earlier related threads in this forum regarding the termination of jobs left in a BUSY state (through problems with the process flow etc), but why are my jobs being flagged as busy ?
Seems like the completed successful status is not getting through to OWB Browser.
Any ideas ?
Thanks
Paul

Login to SQL PLUS as Workflow owner and run
call wf_purge.Move_To_History(null,null)
Search this forum for posts from Oleg from Kiev. He knows what he is doing and his posts helped me a lot. I have seen few posts from him related to this subject.
Vladimir

Process flow hangs when mapping execution fails

Hi,
Has anyone faced the 'process flow hanging' problem after upgrading to OWB 9.2.0.4? Don't know why this is happening again after the upgrade. The audit browser clearly indicates one of the mappings has failed and workflow tables indicate there was a notification upon failure. The process flow runs several sub process flows each containing 5-6 mappings.
Also, the mapping that failed (due to unique key violations on the target table) executed the post mapping stored procedure although the post mapping run condition was set to 'ON SUCCESS'. Is this the expected behaviour for the post mapping operator when there are database related failures?
Our environment is OWB 9.2.0.4 on AIX 5.2.
Database version is 9.2.0.5. We recently upgraded the database from 9.2.0.4 to 9.2.0.5 and OWB from 9.2.0.2.8 to 9.2.0.4. Process flows are executed using sqlplus.
Thanks,
Chethan

Hi,
I would expect you to have less issues with 9204 as there were some fixes applied. So I have not seen this before.
To get into the mapping a little bit more, is this a row based mapping that is under the tresshold? In any case, if you specify "on success" I would expect it to only work on success... A database related error will also cause it to get an error, so this is interesting as well.
Does the error repeat at any case if there is a failure?
Jean-Pierre

Export and Import of mappings/process flows etc

Hi,
We have a single repository with multiple projects for DEV/UAT and PROD of the same logical project. This is a nightmare for controlling releases to PROD and in fact we have a corrupt repository as a result I suspect. I plan to split the repository into 3 separate databases so that we have a design repos for DEV/UAT and PROD. Controlling code migrations between these I plan to use the metadata export and subsequent import into UAT and then PROD once tested. I have used this successfully before on a project but am worried about inherent bugs with metadata export/imports (been bitten before with Oracle Portal). So can anyone advise what pitfalls there may be with this approach, and in particular if anyone has experienced loss of metadata between export and import. We have a complex warehouse with hundreds of mappings, process flows, sqlldr flatfile loads etc. I have experienced process flow imports that seem to lose their links to the mappings they encapsulate.
Thanks for any comments,
Brandon

This should do the trick for you as it looks for "PARALLEL" therefore it only removes the APPEND PARALLEL Hint and leaves other Hints as is....
#set current location
set path "C:/TMP"
# Project parameters
set root "/MY_PROJECT"
set one_Module "MY_MODULE"
set object "MAPPINGS"
set path "C:/TMP
# OMBPLUS and tcl related parameters
set action "remove_parallel"
set datetime [clock format [clock seconds] -format %Y%m%d_%H%M%S]
set timestamp [clock format [clock seconds] -format %Y%m%d-%H:%M:%S]
set ext ".log"
set sep "_"
set ombplus "OMBplus"
set omblogname $path/$one_Module$sep$object$sep$datetime$sep$ombplus$ext
set OMBLOG $omblogname
set logname $path/$one_Module$sep$object$sep$datetime$ext
set log_file [open $logname w]
set word "PARALLEL"
set i 0
#Connect to OWB Repository
OMBCONNECT .... your connect tring
#Ignores errors that occur in any command that is part of a script and moves to the next command in the script.
set OMBCONTINUE_ON_ERROR ON
OMBCC "'$root/$one_Module'";
#Searching Mappings for Parallel in source View operators
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Searching for Loading/Extraction Operators set at Parallel";
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Searching for Loading/Extraction Operators set at Parallel";
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
foreach mapName [OMBLIST MAPPINGS] {
foreach opName [OMBRETRIEVE MAPPING '$mapName' GET TABLE OPERATORS] {
foreach prop1 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (LOADING_HINT)] {
if { [ regexp $word $prop1] == 1 } {
incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (LOADING_HINT) VALUES ('');
OMBCOMMIT;
foreach prop2 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (EXTRACTION_HINT) ] {
if {[regexp $word $prop2] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (EXTRACTION_HINT) VALUES ('');
OMBCOMMIT;
foreach opName [ OMBRETRIEVE MAPPING '$mapName' GET DIMENSION OPERATORS ] {
foreach prop1 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (LOADING_HINT) ] {
if {[regexp $word $prop1] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (LOADING_HINT) VALUES ('');
OMBCOMMIT;
foreach prop2 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (EXTRACTION_HINT) ] {
if {[regexp $word $prop2] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (EXTRACTION_HINT) VALUES ('');
OMBCOMMIT;
foreach opName [ OMBRETRIEVE MAPPING '$mapName' GET CUBE OPERATORS ] {
foreach prop1 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (LOADING_HINT) ] {
if {[regexp $word $prop1] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (LOADING_HINT) VALUES ('');
OMBCOMMIT;
foreach prop2 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (EXTRACTION_HINT) ] {
if {[regexp $word $prop2] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (EXTRACTION_HINT) VALUES ('');
OMBCOMMIT;
foreach opName [ OMBRETRIEVE MAPPING '$mapName' GET VIEW OPERATORS ] {
foreach prop1 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (LOADING_HINT) ] {
if {[regexp $word $prop1] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (LOADING_HINT) VALUES ('');
OMBCOMMIT;
foreach prop2 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (EXTRACTION_HINT) ] {
if {[regexp $word $prop2] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (EXTRACTION_HINT) VALUES ('');
OMBCOMMIT;
if { $i == 0 } {
          puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
          puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Not found any Loading/Extraction Operators set at Parallel";
          puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
          puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Not found any Loading/Extraction Operators set at Parallel";
     } else {
          puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
          puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Fixed $i Loading/Extraction Operators set at Parallel";
          puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
          puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Fixed $i Loading/Extraction Operators set at Parallel";
close $log_file;
Enjoy!
Michel

Make to Order Scenario Process Flow

Hi Friends -
I am looking for simple Make to Order scenario with BOM Components with Routing.
The process flow I want to execute -
1. Create a Sales Order for a Finished Product (Product should have a BOM for Production)
2. Do the product Materials Planning for the Sales Order through MD50
3. Get all the dependent material requirements (both for products as Planned Order and also for BOM Components - all the BOM components should also be planned)
4. Convert Planned Order for Product to Production Order
5. Convert Planned Orders for BOM components to Purchase Requisition
6. Confirm Production Order
Pls correct me if I my process flow is wrong or requires modification.
I will appreciate if you can validate the above process flow and guide me to execute the same in the system.
Pls help me on configuring the system and setting up the materials and related master data for the same.
Thanks in advance
Purnendu

Dear GSL - Pls check the following details
1. I have created a Material Master data for Finished Product (FERT).
2. I have assigned Item Category Group - 0004, and General Item Category group as 0004 ( Make to Order / Assembly).
3. I have assigned MRP Type PD in MRP 1 View and Strategy Group 20 (Make to Order Production) in MRP 3 View.
4. Now created a Universal (Type 3) BOM for the product with one material component.
5. Now also created a Routing for the Material with two operations having PP01 a control key.
6 When I try to create a Sales Order for the finished material it is giving message
Configuration not possible for material 747 : Reason 3 --> Help
Message no. V1360
Diagnosis
This may have been caused by one of the following:
1. The configuration profile for the material allows or requires the bill of materials to be exploded during order processing. However, a plant has not been specified in the item.
2. The configuration profile of the material allows or requires the bill of materials to be exploded during order processing, but the order quantity in the item must be greater than 0.
3. A configuration profile has not been maintained
or
A configuration is not permitted for the material
or
4. The configuration profile of the material allows or requires the bill ofmaterials to be exploded during order processing. However, the system could not determine a date because important data is missing from the item (see incompletion log).
This message is also coming in the Incompletion log f the sales order.
I have not checked the Configurable Indicator for the material in the Basic Data 2 view of the materials master, but still the message related to Configuration is coming.
Pls help e on this.
Thanks and warm regards
Purnendu

Process flow hangs in state "bussy"

Hi,
We are encountering what seems to be a "random" problem when runing process flows. In about 1 out of 4 runs the flow "hangs" with status "busy"
The technical specs are as follows:
OWB 9.2.0.2.8 on WIN2K Server SP4.
There are two runtime repositories on two different WIN2K database servers (Oracle 9.2.0.4 EE)
The symptoms are as follows:
- We have more than 10 process flows containing from 15 to 60 processes. The problem is not related any single process flow, and occurs on both our target servers.
- The process flows runs OK in approximately 3 out of four runs.
- When the process flows "hangs", one or more of the processes in the process flow also hangs in the "busy" state. The hanging process can be a mapping or an external process
- The processes that have status "busy" have actually finished. They have a completion time set, and in the case where the process sends mail, the mail has been received. In the case of mappings I have verified that the mapping has completed, and that the session performing mapping has terminated.
- When the problem occurs, there is always the same "lock" pattern displaying in OEM:
Username Session IdLockMode HelMode Requ Object Name ROWID Object OwnObject T Resource ID1 Resource ID2
OWBRT92 17TM ROW SHARNONE WB_RT_SERVICE_QUEUE_TAB OWBRT92 TABLE 61161 0
OWBRT92 17UL EXCLUSIVNONE 1073741824 0
OWBRT92 48TM ROW SHARNONE WB_RT_NOTIFY_QUEUE_TAB OWBRT92 TABLE 61145 0
OWBRT92 67TM ROW EXCLNONE WB_RT_NOTIFICATION_COMPONENTS OWBRT92 TABLE 61137 0
OWBRT92 67TM ROW EXCLNONE WB_RT_NOTIFY_QUEUE_TAB OWBRT92 TABLE 61145 0
OWBRT92 67TM ROW EXCLNONE WB_RT_NOTIFICATION_ACKS OWBRT92 TABLE 61141 0
OWBRT92 67TM ROW SHARNONE WB_RT_NOTIFICATION_STREAMS OWBRT92 TABLE 61135 0
OWBRT92 67TM ROW EXCLNONE WB_RT_AUDIT_EXECUTIONS OWBRT92 TABLE 61199 0
OWBRT92 67TX EXCLUSIVNONE 262151 87564
Session 17 is the runtime service, and these two locks are present under normal operation. Session 48 is the Sqlplus session runing the execution template, and session 67 is (i think) the session that is causing the problem.
- The advanced queue WB_RT_NOTIFY_QUEUE tab shows "Number in state ready" equal to the number of processes still in the state "busy" i the process flow.
- When the runtime service is stoped (using the stop_service.sql) The locking sessions disappears.
- When the service is restarted, the processes change status to "bussy recovery" There is now a RPE-01008 and a RPE-01009 message in the "errors" section for the mapping.
- After the failed recovery, everything looks normal, except that there are now twice the number of messages in state READY on the WB_RT_NOTIFICATION_QUEUE. The only way I have found to get rid of these is to delete them from the queue table.
Is this a known problem? We are about to go live in a few weeks, and this could be a serious show stopper if we can't rely on the daily process flows to run as expected.
I could log a TAR on this, but I suspect support would ask for a test case, and Im going to have a hard time providing it for them in this case.

Jean-Pierre,
Thanks for the update. I was afraid this was going to be one of those "hard to pinpoint" issues...
When the problems occurs the Worflow Monitor always shows the task status as "Notified".
The "Main routine" is no longer executing. The session that was executing the mapping has disconnected, and the mapping has completed successfully. (I have verified this by checking the rows in the target tables). Also, the problem is not restricted to mappings. Sometimes it happens to "mail notifications", and in these cases the mail message is received as expected.
It looks to me like there is some kind of synchronization problem between AQ and the controlling process (the runtime access user session) that can arise under a given condition (which I unfortunately have not been able to determine what is). As far as I can tell, the process executing the mapping completes and puts the message that it has completed on the Notify_Queue (hence the messages in stat "Ready" on the queue), but for some reason the process waiting to read the message fails to do so.
As for a test case, I have recently sent an export of our design repository to Igor Machin. Is it possible for you to have a look at that? As I mentioned in the first post, our Process Flows are fairly complex. Some of the flows are executing 50+ mappings in parallel.

Process flow related to lis

Similar Messages

Maybe you are looking for