Process for chek-in and check-out  webdynpro app in DTR

Hi gurus,
Please let me know the process for how to check in and check out webdynpro application in DTR.
thanks ,
Lohi.

Hi Lohi,
When you are connected ot DTR and trying to change WD component from there you will be asked about whether you need to add changed files to activity. Don`t add any generated files to activities (from bin nad gen_* folders). To check out, go to development infrastrucutre view, select activity, specify name, review it, check out, activate.
Best regards, Maksim Rashchynski.

Similar Messages

  • Please guide me for user authentication and authorization in WebDynPro App

    Hi,
        I just study the WebDynPro to develop the SAP Portal. I've ever developed the Web-based App using J2EE. So when i developed the Web-based App i have to develop the control of the user authentication and authorization on each page for example ,checking the session of the user whether they can access this page or whether session is expired or not,. So i have no idea with the WebDynPro and the SAP Portal because i never had experience for both WebDynPro and Portal.
    I need to ask you some question to clarify my doubt :
    1. SAP Portal  is web page that include every enterprise application with in one page and user log-in to them just on time, isn't it?
    2. If i integrate WebDynPro with SAP Portal, which one will do the authentication and authorization?. I mean that, Do i have to develop the code to check authentication and authorization in the WebDynPro App or Let the SAP Portal manage them?
    3.Could you please suggest the best practice for authentication and authorization in webDynPro.
    Many Thanks
    Noppong J

    in most case you don't have to write code to deal with session, authentication and authorization.
    1. yes,
    2. no, no code needed. you just set an attribute to your application, which make the the authentication required. when user access this page, portal will display the logon page
    3 you can put some authorization related code in web dynpro for specific requirement, search this doc "Protecting Access to the Web Dynpro Car Rental Application Using UME Permissions"

  • Items greyed out after upgrading and migrating to Sharepoint 2013 - Open and Check Out + Manage Document Option

    Hi there,
    Following a migration to SharePoint 2013, the follow options have been disabled (Open and Check out + Manage) (see below). These are critically important functions and make it very hard to make SharePoint a useable interface. Any guidance on how to resolve
    these issues is greatly appreciated. This is not a branded website, and there has been no changes made to the standard interface.
    Kind regards
    Jarrad Koppen

    I'm not sure what the easiest way is either.  First, I would try to create a new site collection with a new library and see if you get the same behavior.  If not, then its something in the upgrade process.  If it does that also would point
    to something being wrong in the way that javascript is being executed.
    If it is happening everywhere I suspect you'll have to start tracing javascript using something like IE developer's toolbar to see why the status on those buttons isn't changing when you select a document.  I'm not sure what else to suggest.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • How can I use my iPad to check-in and check-out books to my students in my classroom?

    How can I use my iPad to check-in and check-out books to my students in my classroom?

    Assuming there won't be any wi-fi netwokrs, will there be cellular reception there?
    If so, you need to check if a carrier or the carrier if there is only one, offers a data only plan for the iPad and similar devices along with providing a mico-SIM card. If a carrier offers a data only plan with a full size SIM card, you can cut the SIM card down to mico-SIM size. There are devices that provide for this.
    If there is cellular reception but a carrier or the carrier doesn't have a data plan only for the iPad and similar devices but offers a tethering plan for phones on their network, you can tether your iPad to the cell phone for internet access via the carrier's cellular network.

  • In workflow need to check in passed validaitons and check out failed once?

    Hi All,
    Can any one let me know is the following requirement possible?
    In workflow can I able to split records based on validation result? I need to check in passed validations and check out failed validations..
    Regards
    Rajeev

    Hi Rajeev,
    You can try out both branch step and validation step and see which serves your purpose better.
    In branch step you can give multiple validation/validation groups,if result is TRUE take the first branch and check in at STOP.
    If FALSE,take dont checkin at STOP,either cascade or Rollback as the case be.Also here you can call the same or other Workflow.The split branches can later be combined using MERGE or Group.
    Other way can be by using Validation step,setup iteration threshold.here failed jobs will be sent to previous step and passed ones will move ahead in WF.Later you can checkin at STOP and failed jobs would still be in WF in checkout state.
    For your reference :
    http://213.41.80.15/SAP_ELearning/OKEC/nav/content/011000358700000601512007E.PDF
    http://help.sap.com/saphelp_mdm550/helpdata/en/43/e0615a82b40a2ee10000000a11466f/frameset.htm
    Thanks,
    Ravi

  • Possible to check IN and Check Out Reference Tables?

    Hi All,
    I am wondering is it possible to check in and check out Look Up and other tables like we do for main table???
    If so can any one letme know how?
    Thanks
    Rajeev

    Hi Rajeev,
    Can you elaborate your business requirement of having Check out on reference table?
    Checked out option is used for the below scenario in Main Table
    Create - If the record is checked out, then it is virtually available in MDM until it is approved as the part of the workflow
    Change - The record is kept checked out , so that the user who changes it owns it , and no others has access to change it to achieve the data consitency
    But for reference data , the records is already available in the target system and it is fed to MDM
    Regards,
    Antony

  • I used to share one apple ID/account with my ex but made a new one for myself recently and logged out of the old one but when I try to update my iBooks it asks for the old account's password(which my ex changed by now)

    I used to share one apple ID/account with my ex but made a new one for myself recently and logged out of the old one but when I try to update my iBooks (only happens with this app)it asks for the other account's password(which my ex changed by now). I don't understand why this happens when I'm logged into my account and it only happens with that app. Please help, I need to update. :/

    Content (apps, music, ibooks, films etc) is tied to the account that originally downloaded it, so if the iBooks app was downloaded using the account that you used to share with your ex then only that account can download updates to it. As it's a free app you could delete it and re-download it under your own account - and then re-download your ibooks into it (or copy the books to your computer's iTunes first via File > Transfer Purchases and then sync them back to the app).

  • What is the process for rollout projects and upgradation projects

    Hi All,
    Hope you all are doing well.
    I am a new bee in oracle apps. Just would like to understand  what is the process for rollout projects and upgradation projects and difference between them.
    Please help me. Thanks in advance.
    Regards,
    MM

    Don't know which phone do you use but if you configure your Exchange ActiSync Profile on your Phone there is an option for the CONTACTS. Basically Exchange account will pull the contacts from your profile.. I did test it on my iPhone 5 and works for mee
    Where Technology Meets Talent

  • MOD10 Validation for Credit Card and Checks

    Hi Friends, I am looking for MOD10 Validation function for Credit Card and Checks.

    See example below. Suggest you check this a.) suits your requirements and b.) actually works ;-)
    FUNCTION luhn_check_digit (
       n IN VARCHAR2)
       RETURN NUMBER
    IS
       SUBTYPE st_num IS NUMBER (10);
       m st_num := 0;
       FUNCTION luhn_sum (
          n IN VARCHAR2)
          RETURN NUMBER
       IS
          l st_num := LENGTH (n);
          t st_num := 0;
          s st_num := 0;
       BEGIN
          <<multiply>>
          FOR i IN 0 .. (l - 1) LOOP
             t := SUBSTR (n, (l - i), 1) * (MOD ((i + 1), 2) + 1);
             <<combine>>
             FOR j IN 1 .. LENGTH (t) LOOP
                s := s + SUBSTR (t, j, 1);
             END LOOP combine;
          END LOOP multiply;
          RETURN s;
       END luhn_sum;
    BEGIN
       m := luhn_sum (n);
       RETURN (CEIL (m / 10) * 10) - m;
    END luhn_check_digit;

  • Is it possible to check out whole repository from dtr command line tool?

    Hi
    I wonder is it possible to check out whole repository from dtr command line tool.
    Normally, in NWDS i have to log into SLD, select a component, then select components i want to check out into workspace.
    I would like to do some static analysis (PMD, etc) but checkiing out everything manually is really painfull.
    Are there any guides how to check out everyhing from the command line (so i would nothave to specify any paths except top level components)?

    Hi,
    I don't know of a feature which would allow to check out "everything" from the "root".
    checkout Checks the given resource out.
    Syntax checkout/co \[-exclusive| -x] resource \[activity]
    Options exclusive|x If specified the resource is exclusively checkout-out.
    Arguments resource The resource that should be checked out.
    activity The path or name of the open activity that should be used for the checkout, if no activity is specified one is implicitly created.
    Output Variables
    $wr[] Working resources
    $act[] Activities
    Description Checks a resource out.
    Examples
    Checkout a file within a given activity
    Checks out the file "/ws/wspdir/wsp/dir/a.txt" in the activity "/act/myActivity".
    checkout /ws/wspdir/wsp/dir/a.txt /act/myActivity
    Checkout a file
    Checks out the file "/ws/wspdir/wsp/dir/a.txt" in an activity that is implicitly created and returned in the output variable "$act".
    checkout /ws/wspdir/wsp/dir/a.txt
    Checkout a file exclusively
    Checks out the file "/ws/wspdir/wsp/dir/a.txt" exclusively in an activity that is implicitly created and returned in the output variable "$act".
    checkout -x /ws/wspdir/wsp/dir/a.txt
    Can you please also tell us what kind of statistics you intend to create? Sorry I don't know what PMD abbreviates.
    You can always generate yourself an up-to-date documentation of the DTR Console by exporting the help (for details type help help): help -x c:/DTRConsole.doc
    Best Regards,
    Ervin

  • Help - I have an apple id account, where is my iPod and iPad registered, but also the iPod of my daughter. How can I make an account for my daughter and keep all the apps she has on her iPod?

    Help - I have an apple id account, where is my iPod and iPad registered, but also the iPod of my daughter. How can I make an account for my daughter and keep all the apps she has on her iPod and in her own iTunes?

    Sorry, content bought with one Apple ID cannot be merged or transferred to another Apple ID.

  • I did a restore settings for my iTouch which wiped out the apps.  What happens now when I sync my iPad?  Will I lose all my apps on it?

    I did a restore settings for my iTouch which wiped out the apps.  What happens when I sync my iPad? Will I lose all the apps on the iPad?  I realize it was a huge mistake to mess with the settings on the iTouch.

    Completely seperate.

  • Check-out Exclusive and Check-out Nonexclusive

    Hi,
    When we check out a record exclusively or non-exclusively why is the 'Modify Join Permissions' option active(not disabled).According to my understanding,if we make check-out non-exclusive, without modifying join permission,all the other users must be able to 'Join checkout'.If it is exclusive we have to assign user and role who can Join Checkout it.Then why is the 'Modify Join Permission' option coming for non-exclusive checkout also.Apart from my understanding is there any other difference between the two.Please help me in clarifying this.
    Thanks and Regards,
    Preethi

    Hi,
    (1) Exclusive, which grants join permissions to no other roles or users (by default, no other users can join the checkout); and
    (2) Nonexclusive, which grants join permissions to the Everyone role (by default, all users can join the checkout).
    Instead of checking in the duplicate record, the owner can use the Roll Backcommand to delete the duplicate and abandon changes.
    You can use the All Versions command to display both versions (originals and duplicates) of all checked out records. This is the only way for other users to join the check out of new records.
    You can use role-based privileges to decide whether owners and/or non-owners are permitted to check in, roll back, or modify join permissions of checked out records.
    follow this link:
    http://help.sap.com/search/highlightContent.jsp
    hope this may help you,
    Regards,
    srinivas

  • Process for Return Delivery and Capture Excise

    Dear All,
    I have done GR for 10 Qty and created Excise Invoice for the same, now I have to reject 5 qty out of 10, so I have done it through Return Delivery movement type 122.
    Now My question is how to adjust 5 qty and its amount in in Excise Registers.
    Regards,Vivek

    HI
    after performing 122 movement type
    now use t-code J1IS ,click on create and give  material document of 122 movement type there give  plant ,excise group ,series group and vendor
    for more info check following link
    [Return to vendor with excise duty..?;
    Regards
    Kailas Ugale

  • Keyboard shortcut for "Ease in" and "Ease out"?

    Just wondering if there's a way to map keys for ease in/ease out instead of right clicking keyframes and navigating there.
    Thanks.
    (Premiere CS3)

    I use Ease-In/Out dissolves hundreds of times per project, week in and week out. I've made a simple preset for it. One for Fading in and one for fading out. Drag and drop anywhere on the clip and it snaps to the start and end of the clip as you need it. It's not a keyboard shortcut which would certainly be nice, but it was easier than manually doing it hundreds of times.
    One thing I don't like is that I sometimes click on the Preset accidentally and then hit a keyboard button and it's suddenly changed the Preset name to the keyboard key that I hit (usually the space bar) because when you click on a preset twice you can change it's name. I know that sounds dumb and petty, but it happens to my assistant editors every so often as well since they too have to use these dissolves a ton. I wish the only way to rename Presets was by right-clicking on it and having a "rename" selection to prevent the issue I described. It's the little things that sometimes make a big difference so I think I'll submit a FR. Followers welcome.

Maybe you are looking for