Process for replacing images

I would like to get our opinion on how I am working when replacing images.
The help-project has not been updated since it first was generated but much has been done to the system. So there are a lot of images to replace but I have very limited time and the customer want as much as possible to be done. This means that I have to do some things in a way that might not be the best way but is the fastest. But I don’t want to work in a way that we later regret because it causes some problem that I haven’t realized yet. I don’t have much knowledge of the updates of the system or of the RoboHelp-project (what is described in the help, where in the help is it described).
I capture the image with IrfanWiew.
I delete the old image in the Design Editor. (I’m aware that the image is not removed from the project but I will deal with this later.)
I paste the image in the Design Editor. (I find this the fastest way to get the new pictures where they should go.)
When I have finished replacing images I create a folder and drag the images there (either in RoboHelp or in Windows Explorer). The old images are in a separate folder but I don’t want the new images in the same folder because it might be some name conflicts.
I remove unused images by looking at the report Unused Files.
Is this an ok way to work?

If you are replacing one image with another, you could could save them with the same file name and in the same location. Your project should then pick it up. However there is a proviso that the old and new images are exactly the same size. If they are not, you may have to reset the image size inside the Design Editor for each image.
If you use your workflow, I would not paste the image in. Whilst this is acceptable, you'll end up with image file names that bear no resemblance to the image (e.g. image001.png, image002.png, etc.) which may create future difficulties. Also ensure you drag your images from INSIDE your project. If you do this in Windows, your project will be unaware you have moved them and report them as broken links.

Similar Messages

Script for replacing Image from a frame into InDesign document file

Hi All,
I am having an indesign document (indd) file with images and texts. I am using InDesign Server CS4 to run the scripts via SOAP.
My requirement is to replace any of the images from the required frame/s of indesign document through scripting (I already have frame id of which image needs to be replaced). I have written written java-script file (as given below): but when I execute this java-script on InDesign Server via SOAP, I get follwoing error into InDesign Server:
10/03/09 15:15:54 INFO [javascript] Executing File: \\Server_IP_Address\JavaScript_File_Path\JavaScript_File.js
10/03/09 15:16:01 ERROR [link manager] Link missing.; file:C:/help.gif
10/03/09 15:16:01 ERROR [link manager] Link missing.; file:C:/Documents%20and%20Settings/All%20Users/Documents/My%20Pictures/Sample%20Pictures/ Water%20lilies.jpg
10/03/09 15:16:01 ERROR [link manager] Link missing.; file:C:/Documents%20and%20Settings/All%20Users/Documents/My%20Pictures/Sample%20Pictures/ Winter.jpg
Following is the java-script that is being used for replacing image from indd's frame:
var myDocument = app.open(File('//Server_IP_Address/InDesignDocument_File_Path/Sample.indd'));
var tmp_frmid="1339"; //frame id of which image needs to be replaced.
for (var i=0;i<myDocument.pages.length;i++)
var objPage=myDocument.pages.item(i);
var objPageitems = objPage.pageItems;
try
var obj = objPageitems.itemByID(tmp_frmid);
obj.images[0].remove;
obj.appliedObjectStyle = null;
var myImage=obj.place(File('//Server_IP_Address/Images_to_be_reolaced_Path/ImageFile.jpg'));
var old_height = myImage.geometricBounds[2] - myImage.geometricBounds[0];
var new_height = obj.geometricBounds[2] - obj.geometricBounds[0];
var old_width = myImage.geometricBounds[3] - myImage.geometricBounds[1];
var new_width = obj.geometricBounds[1] + ((new_height / old_height) * old_width);
myImage.geometricBounds = [obj.geometricBounds[0] + "mm", obj.geometricBounds[1] + "mm", obj.geometricBounds[2] + "mm", new_width + "mm"];
var diff = obj.geometricBounds[1] - myImage.geometricBounds[1];
myImage.move( undefined, [diff,0] );
break;
catch(e)
myDocument.save('//Server_IP_Address/InDesignDocument_File_Path/Sample.indd');
var previewFile = File('//Server_IP_Address/Images_to_be_reolaced_Path/ImageFile.jpg');
app.jpegExportPreferences.jpegQuality["JPEGOptionsQuality.low"];
app.documents.item(0).exportFile(ExportFormat.jpg, previewFile);
myDocument.close();
I have very urgent requirement; if anyone have any idea; please suggest me. \
It would be highly appreciable.
Kind Regards,
Prashant.

http://www.automatication.com/selection-to-pdf-script.html
Harbs
http://www.in-tools.com

Process for Replacement for rejected parts by vendor

Dear All,
We are facing a problem in mapping the process of Replacement for rejected parts by vendor.
Scenario:
In case of import vendors, material is received in stock and payment is made to vendor thru Invoice.
Now in case of defected parts vendor sends the replacement and the defected part is scrapped.
Is there a process to receive the replacement part with proper accountability ?
Thanks & Regards,
Ritesh.

Hi AP,
We are scrapping the rejected material. Can you explain which movement type is used to put rejected stock to vendor movement type.
Thanks & Regds,
Ritesh.

Error in Branch Processing for Document Image

Hello,
I had some assistance on a previous Thread named: Document Image. I got some great feed back and help implementing an Document Image instead of the normal Download link. My question is that for the Document Library OBE Example item Name is required so the Type image will always appear. My Type is not required and an image is defaulted even if not Browse/Created when viewing IR. There is a default document image for Type and once it is clicked an error message appears.
ORA-22275: invalid LOB locator specified
Error ERR-1009 Error in branch processing. How do I only populate the Type Image if Browse/Create occurs? Here is the code that makes the images appear based on Document Type.
SELECT '<a href="apex_util.count_click?p_url=f?p=&APP_ID.:6:&APP_SESSION.::::P6_EMPLOYEE_ID:' || employee_id || '&p_cat=DOCS&p_id=' || employee_id || '&p_user=' || :app_user || '&p_workspace=' || apex_custom_auth.get_security_group_id || '"><img src="' || decode(mimetype, 'application/vnd.oasis.opendocument.text', '#APP_IMAGES#icodt.gif', 'application/vnd.ms-excel', '#APP_IMAGES#ICXLS.gif', 'application/msword', '#APP_IMAGES#ICDOC.gif', 'application/pdf', '#APP_IMAGES#icpdf.gif', 'application/vnd.ms-powerpoint', '#APP_IMAGES#ICPPT.gif', 'application/vnd.oasis.opendocument.spreadsheet', '#APP_IMAGES#iccalc.gif', 'application/vnd.oasis.opendocument.presentation', '#APP_IMAGES#icodp.gif', 'text/plain', '#APP_IMAGES#ICTXT.gif', 'application/x-zip-compressed', '#APP_IMAGES#ICZIP.gif', '#APP_IMAGES#ICGEN2.gif') || '" width="20" height="20" border="0" />' "Type",
"FILENAME",
"EMPLOYEE_ID",
"FIRST_NAME",
"LAST_NAME",
"EMAIL",
dbms_lob.getlength("PHOTO") "PHOTO"
from "#OWNER#"."OEHR_EMPLOYEES" I hope I explained my issue correctly for everyone to understand. Thanks for viewing and taking time to assist.

Charles,
I mentioned the solution in my previous post and said that you could use a case statement not to display the download link when there is no filename:
SELECT CASE
 WHEN filename IS NOT NULL
 THEN '<a href=#><img src='
 || DECODE
 (mimetype,
 'application/vnd.oasis.opendocument.text', '#APP_IMAGES#icodt.gif',
 'application/vnd.ms-excel', '#APP_IMAGES#ICXLS.gif',
 'application/msword', '#APP_IMAGES#ICDOC.gif',
 'application/pdf', '#APP_IMAGES#icpdf.gif',
 'application/vnd.ms-powerpoint', '#APP_IMAGES#ICPPT.gif',
 'application/vnd.oasis.opendocument.spreadsheet', '#APP_IMAGES#iccalc.gif',
 'application/vnd.oasis.opendocument.presentation', '#APP_IMAGES#icodp.gif',
 'text/plain', '#APP_IMAGES#ICTXT.gif',
 'application/x-zip-compressed', '#APP_IMAGES#ICZIP.gif',
 '#APP_IMAGES#ICGEN2.gif'
 || ' width=20 height=20 border=0 /></a>'
 ELSE NULL
 END TYPE,
 filename, employee_id, first_name, last_name, email,
 DBMS_LOB.getlength (photo) photo
FROM oehr_employees;) :)
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Process for Sharpe images

Hi,
I have read through the forums and followed a lot of the suggestions. But I still find images appear out of focus once placed into Muse. My current workflow is creating the image in illustrator (if vector, most of mine are), save for web at right size. Place into Muse. For some unexplained reason, some graphics look great and others look out of focus? Even though I use the same workflow?
Can anyone suggest a solid workflow for rendering vector images for the use in muse.
Thanks in advance

Turn off the Convert Opaque PNG Images to JPEG option in Site Properties.
By default Muse will convert an opaque PNG image to JPEG to produce a generally much smaller image (and thus faster page load times). This works well if the original image is photographic in nature, but doesn't work as well for computer generated illustrations or other line art since JPEG compression introduces noise and softens such images.

How do use the same crop for multiple images.

I have a number of images that I want to use the same crop on. Instead of go through the whole slow process for each image is there a way to use the same crop for all of the images?
And in iPhoto there was a way to copy the adjustment settings to multiple images, I can't see how to do that in aperture.

Use the "Lift&Stamp" tool:
Crop one image.
Lift the crop using the "Lift" tool.
Select the other images.
Stamp the crop adjustment to all of them.
But caution: By default "Lift" will copy all Metadata tags and all adjustments, but the gps data. If you only want to transfer the cropping rectangle, deselect all lifted items but the crop adjustment before stamping.
Regards
Léonie

Standard process for creating a new version of an existing report

Hi All,
We are using Siebel 8.1 with BI Publisher.
Does any one know the standard process for creating a new version of an existing report - ie if 'BIP Report XXX' is created and works correctly from the siebel view but then an enhancement is developed, how is the enhancement deployed so that the new version completely replaces the old?
One suggestion was:
You can upload a new version of an existing report. You have to navigate to Administration - BIP > Report Template Registration... search for the report you need to replace (I would say that the new rtf file need to have the same name). Now you have to go to the "Template" column where there is the reference to the report file already uploaded but you don't have to click on the link that is displayed you have to click near the link in order to place the cursor on the field then you will be able to see the Multi Value Grup icon .. you click on it and you will be able to upload a new file.
We have tested this process today, however it is not effective in replacing the old version of the report.
After carrying out this process (including related steps from bookshelf - ie "click upload files"), we can generate the report from the relevant siebel view and the previous version of the report is still generated.
Is there a standard process for replacing an existing report that is effective?
Thanks.

Hi ,
This currently seems like a bug , we have encountered this too.
work around is you have to delete the rtf files from server Siebel\client\temp\XMLP directory and upload them again so that they are not cached any more.
same on dedicated client you may have to delete relavant files form siebel\client\temp\xmlp directory and upload again.
Thanks,
Vamsi

Processing several images in a batch action to apply their individual auto camera raw auto setings individualy for each image selected.

Hi,
I have a folder with several images that I want to apply Camera Raw auto settings to all of then according to their individual parameters.
When you open a single file in Camera Raw you can click on the "auto" option to make an start point correction for that image.
I want to select all images in a folder and apply this procedure to every selected file without having to open every file individually and clicking in the auto option.
Can this be done from Bridge CC 6.1.0.116?
Appreciate comments on the viability of this task

kbarre wrote:
Auto Sync is functioning as expected, unless I choose Auto Tone first.
If I choose Auto Tone first, a small portion of the selected images will be updated, but most will not.
Lightroom's handling of auto-tone leaves something to be desired - I have a lot of experience with it, trying to make reliable develop-setting plugins which include auto-toning. Those plugins have a bewildering amount of logic - something like this: initiate auto-toning, check back to see if it has properly settled, issue the auto-toning again if it never seems to be properly settling... - usually it works out after a while, but even sometimes it never does, and generates an error: can't get auto-toning to settle across all photos.
The point of all this is that there are bugs in Lr's handling of auto-toning, as you are growing aware.
Try this:
* do the auto-toning, then let it percolate for a while.
* then visit each photo at 1:1 (to force Lr to finalize settings...), and confirm auto-toning has settled...
Then try auto-syncing that preset (make sure process versions are all the same, and preset does NOT include auto-toning - I would leave process version OUT of your presets).
Better?
I don't expect this is a workflow you'll want to do all the time, but as a test it might help shed some light on the problem.
Rob

How to export a whole process for a single image.

Good morning.
I would like to know how I can export a whole process for a single image. Is it possible? With that I can print of the way that goes better.
Thanks.

Hi Raghavendra,
Thanks for answering my query. I have created a transport request and exported the folder I need to take backup of. But when I tried testing import of the same request I am getting following error. Do you have any idea what is the cause of this error?
com.sap.security.core.server.destinations.itsam.DestinationRuntimeException: com.sap.security.core.server.destinations.api.DestinationException: [_DestinationServiceAuthorization1005] Code-based destination service access denied to component sap.com/cafeugpuiadmin. Access to security-relevant internal destination properties (e.g. passwords, tickets, etc.) is restricted to few selected engine components and not generally available to any service or application.
Kind Regards,
Urvashi

Best practice for increasing image processing speed

Are there best practises for efficient image processing so that the overall perfomance speed will be improved? I have a need to do near real time image processing (threshold, filtering, particle analysis/cleaning and measurements) at 10fps. So far I am not satisfied with my cycle time so I am wondering if there are documented ways to speed up performance.
Solved!
Go to Solution.

Hi,
Navigates to the "Vision and Motion" palette, then "Vision Utilities" and "Image Management" palette, you will find ther the "IMAQ multi-core options" vi.
You will be able to set or get the number of cores used by the IMAQ functions.
Regards

Af:commandImageLink not processing the aboulite path for displaying image

All,
We are required to display an image in the UI. The image is not stored in the deployed ear file. It is stored in the "*<DOMAIN_HOME>\Inventory\images*".
Where DOMAIN_HOME=D:\JUPITER_CORONA\system11.1.1.3.37.56.60\DefaultDomain\inventory
I would process an image absolute path in the af:commandImageLink tag as follows,
*<af:commandImageLink "icon=file://D:/JUPITER_CORONA/system11.1.1.3.37.56.60/DefaultDomain/inventory/images/equipment.png" text"equipment" shotdesc="icon" />*
The problem is that the above tag is not processing the above mentioned absolute path and displaying text "icon" instead of actual icon image. As per the ADF documentation the tag processes absolute path as well.
Can someone suggest as to where I am going missing.
regards,
Chandra

I was not able to get what you want very well, the situation is a little bit un-usual,
but for solution I suggest the below way.
write a servlet/JSP that return the image (it is like copying the file, read the image from absolute path and send it to the OUTPUTSTREAM of the response aslo remember the MIME and the write filter for the jsp/servlet that end with .jpg or any extension for the image.)
then in the jsf page write the below code.
<af:commandImageLink icon="/jspOrservlerpath/servlet/filename.jpg" text"equipment" shotdesc="icon" />
your servlet (get the filename.jpg and then find the file and return it)
this solution is very common for cases that the file is not available physically such as when you want to read it from another place(your case) or database.
I hope this help you.
I can send you the source for the servlet/jsp if you want.

What's the process to replace an image inside a mask?

Hi There,
The new replace image function is a massive time saver but it doesn't seem to work with masked images.
These images are masked because they're part of an animation so I really need to replace them - not re-import and re-create the animation from scratch.
If this isn't possible, how do I remove the mask? That way I could just delete the mask, replace the image, then re-mask.
Any pointers in the right direction would be much appreciated.
Cheers
Ben

The image replace works perfectly with a masked image intact, only if the two images dimensions are the same.
However, doing the following gets you 95% of the way with just a final tweak of the mask:
select the image on the slide
Format > Copy Animation
then replace image
Format > Paste Animation
Format > Image > Edit Mask

How do I change object layer options and select visible psd layers for an image?

Hello
I have a plugin that replaces images in an indeisgn document. When a user has selected to show one object layer in a psd but not another layer, Indesign looses this information when I replace the old image.
I can store the layers that are visisble before I replace the image, but I have not been able to change the visibility of tha layers back in a correct way.
When the image is replaced, all the layers becomes visible, but if I open the "Object layers options" dialog, only the layers I want to be visible is marked as visible in the list. What I see in the dialog does not correspond with what is shown on the screen.
I use the folowing code to store info about the visible layers:
K2Vector<int32> PnlTrvUtils::GetGraphicLayer(UIDRef imageRef) {
 ErrorCode result;
 K2Vector<int32> visibleLayers;
 InterfacePtr<IGraphicLayerInfo> iGraphicLayerInfo(imageRef,IID_IGRAPHICLAYERINFO);
 if ( iGraphicLayerInfo != 0 ) {
 if ( ! iGraphicLayerInfo->GetIsInitialized() ) {
 InterfacePtr<ICommand> iInitializeGraphicLayersCmd(CmdUtils::CreateCommand( kInitializeGraphicLayersCmdBoss ));
 if ( ! iInitializeGraphicLayersCmd ) {
 result = kFailure;
 } else {
 iInitializeGraphicLayersCmd->SetItemList( UIDList( imageRef ));
 result = CmdUtils::ProcessCommand( iInitializeGraphicLayersCmd );
 if ( result == kSuccess )
 if ( ! iGraphicLayerInfo->GetIsInitialized() )
 result = kFailure;
 int32 i;
 int32 iLayerCount = iGraphicLayerInfo->GetNumberLayers();
 for ( i = 0; i < iLayerCount; i++ ) {
 if (IGraphicLayerInfo::kVisibilityShowing ==iGraphicLayerInfo->GetNthLayerCurrentVisibility(i)) {
 // CAlert::ErrorAlert("visible");
 visibleLayers.push_back(i);
 return visibleLayers;
And I use the folowing code to select the layers I want to be visisble:
void PnlTrvUtils::SetVisibleGraphicLayer(UIDRef imageRef, K2Vector<int32> visibleLayers) {
 ErrorCode result;
 InterfacePtr<IGraphicLayerInfo> iGraphicLayerInfo(imageRef,IID_IGRAPHICLAYERINFO);
 if ( iGraphicLayerInfo != 0 ) {
 if ( ! iGraphicLayerInfo->GetIsInitialized() ) {
 InterfacePtr<ICommand> iInitializeGraphicLayersCmd(CmdUtils::CreateCommand( kInitializeGraphicLayersCmdBoss ));
 if ( ! iInitializeGraphicLayersCmd ) {
 result = kFailure;
 } else {
 iInitializeGraphicLayersCmd->SetItemList( UIDList( imageRef ));
 result = CmdUtils::ProcessCommand( iInitializeGraphicLayersCmd );
 if ( result == kSuccess )
 if ( ! iGraphicLayerInfo->GetIsInitialized() )
 result = kFailure;
 InterfacePtr<ICommand> setLayerCmd(CmdUtils::CreateCommand(kSetGraphicLayerInfoCmdBoss));
 if (setLayerCmd) {
 setLayerCmd->SetItemList(UIDList(imageRef));
 InterfacePtr<IGraphicLayerInfo> setLayerCmdLayerInfo(setLayerCmd, UseDefaultIID());
 // copy over the new settings
 setLayerCmdLayerInfo->Copy(iGraphicLayerInfo);
 int32 i;
 InterfacePtr<IGraphicLayerInfo> resetLayerInfo(setLayerCmdLayerInfo,IID_IGRAPHICLAYERINFO);
 if (resetLayerInfo) {
 int32 iLayerCount = resetLayerInfo->GetNumberLayers();
 for ( i = 0; i < iLayerCount; i++ ) {
 bool16 visible = false;
 for(int32 j = 0; j < visibleLayers.size(); j ++) {
 if (i == visibleLayers[j]) {
 visible = true;
 if (visible) {
 resetLayerInfo->SetNthLayerCurrentVisibility(i, IGraphicLayerInfo::kVisibilityShowing);
 } else {
 resetLayerInfo->SetNthLayerCurrentVisibility(i, IGraphicLayerInfo::kVisibilityHidden);
 // clear out the flag
 int32 currFlags = static_cast<int32>(setLayerCmdLayerInfo->GetGraphicLayerFlags());
 currFlags &= ~IGraphicLayerInfo::kValidationFailed;
 setLayerCmdLayerInfo->SetGraphicLayerFlags(static_cast<IGraphicLayerInfo::GraphicLayerFla gs>(currFlags));
 // process the command
 CmdUtils::ProcessCommand(setLayerCmd);

Hello,
Did you get this to work?
Thanks.
P.

Standard Process for Credit Memo & Debit Memos in CRM

Dear all,
What is the standard process for Credit Memo and Credit Memo Creation within CRM Complaint Transaction?
We can successfully replicate Return Items and Replacement Items in ECC Return Order
But I don't know how to process Credit Memo and Debit Memo in ECC.
What are the Accounting Implications takes place once we create and release the credit memo / Debit memo in CRM Complaint Transaction?
How to see the entire document flow?
I can create Credit Memo for a Returned Line Item in CRM without any errors. But I could not see any follow-up transaction or process either in CRM or ECC.
Kindly educate me in this regard. Your suggestions are highly appreciated
Best regards
Raghu ram
Edited by: Raghu Ram on Jun 23, 2010 6:29 PM
Edited by: Raghu Ram on Jun 25, 2010 8:30 AM

Hi suchi,
The following would be very useful to you.
To reduce implementation time for print forms development, SAP has created a set of the most commonly used forms - Preconfigured Smart Forms:
SD: Invoice, Quotation, Contract, Delivery Note, Order Confirmation, Scheduling Agreement, Inquiry, Cash Sales, Picking List
MM: Purchase Order, Request for Quotation, Contract, Delivery Schedule, Good Issue (3 scenarios), Good Receipt (3 scenarios)
FI: Dunning Notice
All can easily adapt these forms to their requirements, saving time and money.
Hope this information has been useful to you.
if you would like to have a smartform of your own i.e a Z or a Y then there is an option to get a sap script copied onto a smartform.
the sap script for the same is -> F140_DOCU_EXC_01
Go to Txn SMARTFORMS and just put the required smart form name in FORM field and then go to the menu bar: Utilities-> Migrate SAPScriptForm and juts type in the Script name which is given above(i.e F140_DOCU_EXC_01 )
I hope this will be an amicable solution.
if helpful pls reward.
Thanks
Venugopal

SQL Server 2012 installation failure An error occurred for a dependency of the feature causing the setup process for the feature to fail.

I am installing SQL Server 2012 Developer (from ISO image written on DVD), my machine has Windows 7 (Edit: Windows 7 with service pack 1) on it. This machine already has SQL Express and SQL 2008 R2 Express installed in it.
On running 2012 setup it goes fine from Setup Support Rules to Installation Progress. In Installation Progress after some progress installation fails.
Windows show the following components couldn't installed:
Managment Tools Complete Failed. Client Tools Connectivity Failed. Client Tools SDK Failed. Client Tools Backwards Compantibility Failed. Managment Tools Basic Failed. SQL Server Data Tools Failed. Reporting Services -Native Failed. Database Engine
Services Failed. Data Quality Services Failed. full-Text and Semantic Extractins for Search Failed. SQL Server Replication Failed. Integration Services Failed. Analysis Services Failed. SQL Client Connectivity SDK Failed.
In detail for failure of every component it provide these details:
Action required:
Use the following information to resolve the error, and then try the setup process again.
Feature failure reason:
An error occurred for a dependency of the feature causing the setup process for the feature to fail.
In summary log file it provide the following details:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068643839
Start time: 2012-07-31 16:23:37
End time: 2012-07-31 16:33:32
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for Conn: Use the following information to resolve the error, and then try the setup process again.
Next step for SDK: Use the following information to resolve the error, and then try the setup process again.
Next step for BC: Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for BIDS: Use the following information to resolve the error, and then try the setup process again.
Next step for RS: Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for DQ: Use the following information to resolve the error, and then try the setup process again.
Next step for FullText: Use the following information to resolve the error, and then try the setup process again.
Next step for Replication: Use the following information to resolve the error, and then try the setup process again.
Next step for IS: Use the following information to resolve the error, and then try the setup process again.
Next step for AS: Use the following information to resolve the error, and then try the setup process again.
Next step for SNAC_SDK: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: Haansi-PC
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
SQL Server 2005 SQLEXPRESS MSSQL.1
Database Engine Services 1033 Express Edition
9.4.5000 No
SQL Server 2005 SQLEXPRESS MSSQL.1
SQL Server Replication 1033 Express Edition
9.4.5000 No
SQL Server 2005 SQLEXPRESS MSSQL.1
SharedTools 1033
Express Edition 9.4.5000 No
SQL Server 2005
Tools 1033
Express Edition 9.4.5000 No
SQL Server 2005
ToolsClient 1033
Express Edition 9.4.5000 No
SQL Server 2005
ToolsClient\Connectivity 1033 Express Edition
9.4.5000 No
SQL Server 2008 R2 SQLSERVER08EXPR2 MSSQL10_50.SQLSERVER08EXPR2 Database Engine Services 1033
Express Edition 10.50.1617.0 No
SQL Server 2008 R2 SQLSERVER08EXPR2 MSSQL10_50.SQLSERVER08EXPR2 SQL Server Replication 1033
Express Edition 10.50.1617.0 No
SQL Server 2008 R2
Management Tools - Basic 1033 Express Edition
10.50.1617.0 No
SQL Server 2012
LocalDB 1033
Express Edition 11.0.2318.0 No
SQL Server 2012
Reporting Services - SharePoint
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLAgent$SS2012
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: TABULAR
ASSVCACCOUNT: NT Service\MSOLAP$SS2012
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Manual
ASSYSADMINACCOUNTS: PC\Haansi
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, BIDS, CONN, IS, BC, SDK, SSMS, ADV_SSMS, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SS2012
FTSVCPASSWORD: <empty>
HELP: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SS2012
INSTANCENAME: SS2012
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SS2012
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Manual
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SS2012
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: Haansi-PC\Haansi
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools Connectivity
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools SDK
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Server Data Tools
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Integration Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Analysis Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Client Connectivity SDK
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\SystemConfigurationCheck_Report.htm

Please help.
I did what you suggested, but, still got error message to install SQL server data tools: Here is the log.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068037632
Start time: 2014-09-29 15:05:38
End time: 2014-09-29 15:15:55
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SSDTBI_VS2012: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: MSBI
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2008 Management Tools - Basic
1033 Express Edition 10.0.1600.22 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Basic
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Complete
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools SDK
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 SQL Server Data Tools
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Integration Services
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No Yes
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: C:\9f7a58aa5d6d76ffe6be968a4ad339f5\x86\setup\
Installation edition: Express
Slipstream: True
SP Level 1
Patch Level: 11.1.3128.0
Product Update Status:
Success: KB 2674319, KB 2793634
Product Updates Selected for Installation:
Title: Service Pack 1
Knowledge Based Article: KB 2674319
Version: 11.1.3000.0
Architecture: x86
Language: 1033
Title: SQL Server 2012 SP1 GDR Product Update
Knowledge Based Article: KB 2793634
Version: 11.1.3128.0
Architecture: x86
Language: All
Update Source: MU
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SSDTBI_VS2012, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\ConfigurationFile.ini
Detailed results:
Feature: SQL Server Data Tools - Business Intelligence for Visual Studio 2012
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio Tools for Applications 2012
Component error code: 0x80044000
Component log file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\VSTA2012_LangsSupport_Cpu32_1.log
Error description: VS Shell 2012 installation has failed with exit code -2147205120.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3436.0&EvtType=VSTA2012_LangsSupport%40Install%400x-2147205120
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\SystemConfigurationCheck_Report.htm

Process for replacing images

Similar Messages

Maybe you are looking for