Process for Sharpe images
Hi,
I have read through the forums and followed a lot of the suggestions. But I still find images appear out of focus once placed into Muse. My current workflow is creating the image in illustrator (if vector, most of mine are), save for web at right size. Place into Muse. For some unexplained reason, some graphics look great and others look out of focus? Even though I use the same workflow?
Can anyone suggest a solid workflow for rendering vector images for the use in muse.
Thanks in advance
Turn off the Convert Opaque PNG Images to JPEG option in Site Properties.
By default Muse will convert an opaque PNG image to JPEG to produce a generally much smaller image (and thus faster page load times). This works well if the original image is photographic in nature, but doesn't work as well for computer generated illustrations or other line art since JPEG compression introduces noise and softens such images.
Similar Messages
-
I would like to get our opinion on how I am working when replacing images.
The help-project has not been updated since it first was generated but much has been done to the system. So there are a lot of images to replace but I have very limited time and the customer want as much as possible to be done. This means that I have to do some things in a way that might not be the best way but is the fastest. But I don’t want to work in a way that we later regret because it causes some problem that I haven’t realized yet. I don’t have much knowledge of the updates of the system or of the RoboHelp-project (what is described in the help, where in the help is it described).
I capture the image with IrfanWiew.
I delete the old image in the Design Editor. (I’m aware that the image is not removed from the project but I will deal with this later.)
I paste the image in the Design Editor. (I find this the fastest way to get the new pictures where they should go.)
When I have finished replacing images I create a folder and drag the images there (either in RoboHelp or in Windows Explorer). The old images are in a separate folder but I don’t want the new images in the same folder because it might be some name conflicts.
I remove unused images by looking at the report Unused Files.
Is this an ok way to work?If you are replacing one image with another, you could could save them with the same file name and in the same location. Your project should then pick it up. However there is a proviso that the old and new images are exactly the same size. If they are not, you may have to reset the image size inside the Design Editor for each image.
If you use your workflow, I would not paste the image in. Whilst this is acceptable, you'll end up with image file names that bear no resemblance to the image (e.g. image001.png, image002.png, etc.) which may create future difficulties. Also ensure you drag your images from INSIDE your project. If you do this in Windows, your project will be unaware you have moved them and report them as broken links. -
Error in Branch Processing for Document Image
Hello,
I had some assistance on a previous Thread named: Document Image. I got some great feed back and help implementing an Document Image instead of the normal Download link. My question is that for the Document Library OBE Example item Name is required so the Type image will always appear. My Type is not required and an image is defaulted even if not Browse/Created when viewing IR. There is a default document image for Type and once it is clicked an error message appears.
ORA-22275: invalid LOB locator specified
Error ERR-1009 Error in branch processing. How do I only populate the Type Image if Browse/Create occurs? Here is the code that makes the images appear based on Document Type.
SELECT '<a href="apex_util.count_click?p_url=f?p=&APP_ID.:6:&APP_SESSION.::::P6_EMPLOYEE_ID:' || employee_id || '&p_cat=DOCS&p_id=' || employee_id || '&p_user=' || :app_user || '&p_workspace=' || apex_custom_auth.get_security_group_id || '"><img src="' || decode(mimetype, 'application/vnd.oasis.opendocument.text', '#APP_IMAGES#icodt.gif', 'application/vnd.ms-excel', '#APP_IMAGES#ICXLS.gif', 'application/msword', '#APP_IMAGES#ICDOC.gif', 'application/pdf', '#APP_IMAGES#icpdf.gif', 'application/vnd.ms-powerpoint', '#APP_IMAGES#ICPPT.gif', 'application/vnd.oasis.opendocument.spreadsheet', '#APP_IMAGES#iccalc.gif', 'application/vnd.oasis.opendocument.presentation', '#APP_IMAGES#icodp.gif', 'text/plain', '#APP_IMAGES#ICTXT.gif', 'application/x-zip-compressed', '#APP_IMAGES#ICZIP.gif', '#APP_IMAGES#ICGEN2.gif') || '" width="20" height="20" border="0" />' "Type",
"FILENAME",
"EMPLOYEE_ID",
"FIRST_NAME",
"LAST_NAME",
"EMAIL",
dbms_lob.getlength("PHOTO") "PHOTO"
from "#OWNER#"."OEHR_EMPLOYEES" I hope I explained my issue correctly for everyone to understand. Thanks for viewing and taking time to assist.Charles,
I mentioned the solution in my previous post and said that you could use a case statement not to display the download link when there is no filename:
SELECT CASE
WHEN filename IS NOT NULL
THEN '<a href=#><img src='
|| DECODE
(mimetype,
'application/vnd.oasis.opendocument.text', '#APP_IMAGES#icodt.gif',
'application/vnd.ms-excel', '#APP_IMAGES#ICXLS.gif',
'application/msword', '#APP_IMAGES#ICDOC.gif',
'application/pdf', '#APP_IMAGES#icpdf.gif',
'application/vnd.ms-powerpoint', '#APP_IMAGES#ICPPT.gif',
'application/vnd.oasis.opendocument.spreadsheet', '#APP_IMAGES#iccalc.gif',
'application/vnd.oasis.opendocument.presentation', '#APP_IMAGES#icodp.gif',
'text/plain', '#APP_IMAGES#ICTXT.gif',
'application/x-zip-compressed', '#APP_IMAGES#ICZIP.gif',
'#APP_IMAGES#ICGEN2.gif'
|| ' width=20 height=20 border=0 /></a>'
ELSE NULL
END TYPE,
filename, employee_id, first_name, last_name, email,
DBMS_LOB.getlength (photo) photo
FROM oehr_employees;) :)
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------- -
How do use the same crop for multiple images.
I have a number of images that I want to use the same crop on. Instead of go through the whole slow process for each image is there a way to use the same crop for all of the images?
And in iPhoto there was a way to copy the adjustment settings to multiple images, I can't see how to do that in aperture.Use the "Lift&Stamp" tool:
Crop one image.
Lift the crop using the "Lift" tool.
Select the other images.
Stamp the crop adjustment to all of them.
But caution: By default "Lift" will copy all Metadata tags and all adjustments, but the gps data. If you only want to transfer the cropping rectangle, deselect all lifted items but the crop adjustment before stamping.
Regards
Léonie -
Which aperture setting takes sharper images. f/8 or f/11?
I have t2i (550D) and two lenses i.e. 18-55 mm and 55-250 mm. Any idea how to take sharper images of landscape by selecting a particular aperture setting? I read on a different forum that for sharper images f/8 or f/11 are the ideal settings. Any suggestions?
Seems this topic is having many hits so let me give some more info that might be useful to all:
When you need to know real detail analysis of a lens, there is no better place to check than:
PhotoZone
Specific to your question are the 2 links below. Just scroll down to MTF or Modulation Transfer Function also known as spatial frequency response (Way sharpness is measured objectively) That let you know exactly what you wanted to know about the sharpness.
Link to EF-S 18-55mm IS
Link to EF-S 55-250mm
The site should be very useful for any one eager to know specifically a detail about any lens so enjoy. -
Hi,
I have a folder with several images that I want to apply Camera Raw auto settings to all of then according to their individual parameters.
When you open a single file in Camera Raw you can click on the "auto" option to make an start point correction for that image.
I want to select all images in a folder and apply this procedure to every selected file without having to open every file individually and clicking in the auto option.
Can this be done from Bridge CC 6.1.0.116?
Appreciate comments on the viability of this taskkbarre wrote:
Auto Sync is functioning as expected, unless I choose Auto Tone first.
If I choose Auto Tone first, a small portion of the selected images will be updated, but most will not.
Lightroom's handling of auto-tone leaves something to be desired - I have a lot of experience with it, trying to make reliable develop-setting plugins which include auto-toning. Those plugins have a bewildering amount of logic - something like this: initiate auto-toning, check back to see if it has properly settled, issue the auto-toning again if it never seems to be properly settling... - usually it works out after a while, but even sometimes it never does, and generates an error: can't get auto-toning to settle across all photos.
The point of all this is that there are bugs in Lr's handling of auto-toning, as you are growing aware.
Try this:
* do the auto-toning, then let it percolate for a while.
* then visit each photo at 1:1 (to force Lr to finalize settings...), and confirm auto-toning has settled...
Then try auto-syncing that preset (make sure process versions are all the same, and preset does NOT include auto-toning - I would leave process version OUT of your presets).
Better?
I don't expect this is a workflow you'll want to do all the time, but as a test it might help shed some light on the problem.
Rob -
How to export a whole process for a single image.
Good morning.
I would like to know how I can export a whole process for a single image. Is it possible? With that I can print of the way that goes better.
Thanks.Hi Raghavendra,
Thanks for answering my query. I have created a transport request and exported the folder I need to take backup of. But when I tried testing import of the same request I am getting following error. Do you have any idea what is the cause of this error?
com.sap.security.core.server.destinations.itsam.DestinationRuntimeException: com.sap.security.core.server.destinations.api.DestinationException: [_DestinationServiceAuthorization1005] Code-based destination service access denied to component sap.com/cafeugpuiadmin. Access to security-relevant internal destination properties (e.g. passwords, tickets, etc.) is restricted to few selected engine components and not generally available to any service or application.
Kind Regards,
Urvashi -
Best practice for increasing image processing speed
Are there best practises for efficient image processing so that the overall perfomance speed will be improved? I have a need to do near real time image processing (threshold, filtering, particle analysis/cleaning and measurements) at 10fps. So far I am not satisfied with my cycle time so I am wondering if there are documented ways to speed up performance.
Solved!
Go to Solution.Hi,
Navigates to the "Vision and Motion" palette, then "Vision Utilities" and "Image Management" palette, you will find ther the "IMAQ multi-core options" vi.
You will be able to set or get the number of cores used by the IMAQ functions.
Regards -
Af:commandImageLink not processing the aboulite path for displaying image
All,
We are required to display an image in the UI. The image is not stored in the deployed ear file. It is stored in the "*<DOMAIN_HOME>\Inventory\images*".
Where DOMAIN_HOME=D:\JUPITER_CORONA\system11.1.1.3.37.56.60\DefaultDomain\inventory
I would process an image absolute path in the af:commandImageLink tag as follows,
*<af:commandImageLink "icon=file://D:/JUPITER_CORONA/system11.1.1.3.37.56.60/DefaultDomain/inventory/images/equipment.png" text"equipment" shotdesc="icon" />*
The problem is that the above tag is not processing the above mentioned absolute path and displaying text "icon" instead of actual icon image. As per the ADF documentation the tag processes absolute path as well.
Can someone suggest as to where I am going missing.
regards,
ChandraI was not able to get what you want very well, the situation is a little bit un-usual,
but for solution I suggest the below way.
write a servlet/JSP that return the image (it is like copying the file, read the image from absolute path and send it to the OUTPUTSTREAM of the response aslo remember the MIME and the write filter for the jsp/servlet that end with .jpg or any extension for the image.)
then in the jsf page write the below code.
<af:commandImageLink icon="/jspOrservlerpath/servlet/filename.jpg" text"equipment" shotdesc="icon" />
your servlet (get the filename.jpg and then find the file and return it)
this solution is very common for cases that the file is not available physically such as when you want to read it from another place(your case) or database.
I hope this help you.
I can send you the source for the servlet/jsp if you want. -
I am installing SQL Server 2012 Developer (from ISO image written on DVD), my machine has Windows 7 (Edit: Windows 7 with service pack 1) on it. This machine already has SQL Express and SQL 2008 R2 Express installed in it.
On running 2012 setup it goes fine from Setup Support Rules to Installation Progress. In Installation Progress after some progress installation fails.
Windows show the following components couldn't installed:
Managment Tools Complete Failed. Client Tools Connectivity Failed. Client Tools SDK Failed. Client Tools Backwards Compantibility Failed. Managment Tools Basic Failed. SQL Server Data Tools Failed. Reporting Services -Native Failed. Database Engine
Services Failed. Data Quality Services Failed. full-Text and Semantic Extractins for Search Failed. SQL Server Replication Failed. Integration Services Failed. Analysis Services Failed. SQL Client Connectivity SDK Failed.
In detail for failure of every component it provide these details:
Action required:
Use the following information to resolve the error, and then try the setup process again.
Feature failure reason:
An error occurred for a dependency of the feature causing the setup process for the feature to fail.
In summary log file it provide the following details:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068643839
Start time: 2012-07-31 16:23:37
End time: 2012-07-31 16:33:32
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for Conn: Use the following information to resolve the error, and then try the setup process again.
Next step for SDK: Use the following information to resolve the error, and then try the setup process again.
Next step for BC: Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for BIDS: Use the following information to resolve the error, and then try the setup process again.
Next step for RS: Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for DQ: Use the following information to resolve the error, and then try the setup process again.
Next step for FullText: Use the following information to resolve the error, and then try the setup process again.
Next step for Replication: Use the following information to resolve the error, and then try the setup process again.
Next step for IS: Use the following information to resolve the error, and then try the setup process again.
Next step for AS: Use the following information to resolve the error, and then try the setup process again.
Next step for SNAC_SDK: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: Haansi-PC
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
SQL Server 2005 SQLEXPRESS MSSQL.1
Database Engine Services 1033 Express Edition
9.4.5000 No
SQL Server 2005 SQLEXPRESS MSSQL.1
SQL Server Replication 1033 Express Edition
9.4.5000 No
SQL Server 2005 SQLEXPRESS MSSQL.1
SharedTools 1033
Express Edition 9.4.5000 No
SQL Server 2005
Tools 1033
Express Edition 9.4.5000 No
SQL Server 2005
ToolsClient 1033
Express Edition 9.4.5000 No
SQL Server 2005
ToolsClient\Connectivity 1033 Express Edition
9.4.5000 No
SQL Server 2008 R2 SQLSERVER08EXPR2 MSSQL10_50.SQLSERVER08EXPR2 Database Engine Services 1033
Express Edition 10.50.1617.0 No
SQL Server 2008 R2 SQLSERVER08EXPR2 MSSQL10_50.SQLSERVER08EXPR2 SQL Server Replication 1033
Express Edition 10.50.1617.0 No
SQL Server 2008 R2
Management Tools - Basic 1033 Express Edition
10.50.1617.0 No
SQL Server 2012
LocalDB 1033
Express Edition 11.0.2318.0 No
SQL Server 2012
Reporting Services - SharePoint
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLAgent$SS2012
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: TABULAR
ASSVCACCOUNT: NT Service\MSOLAP$SS2012
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Manual
ASSYSADMINACCOUNTS: PC\Haansi
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, BIDS, CONN, IS, BC, SDK, SSMS, ADV_SSMS, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SS2012
FTSVCPASSWORD: <empty>
HELP: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SS2012
INSTANCENAME: SS2012
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SS2012
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Manual
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SS2012
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: Haansi-PC\Haansi
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools Connectivity
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools SDK
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Server Data Tools
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Integration Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Analysis Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Client Connectivity SDK
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\SystemConfigurationCheck_Report.htmPlease help.
I did what you suggested, but, still got error message to install SQL server data tools: Here is the log.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068037632
Start time: 2014-09-29 15:05:38
End time: 2014-09-29 15:15:55
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SSDTBI_VS2012: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: MSBI
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2008 Management Tools - Basic
1033 Express Edition 10.0.1600.22 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Basic
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Complete
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools SDK
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 SQL Server Data Tools
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Integration Services
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No Yes
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: C:\9f7a58aa5d6d76ffe6be968a4ad339f5\x86\setup\
Installation edition: Express
Slipstream: True
SP Level 1
Patch Level: 11.1.3128.0
Product Update Status:
Success: KB 2674319, KB 2793634
Product Updates Selected for Installation:
Title: Service Pack 1
Knowledge Based Article: KB 2674319
Version: 11.1.3000.0
Architecture: x86
Language: 1033
Title: SQL Server 2012 SP1 GDR Product Update
Knowledge Based Article: KB 2793634
Version: 11.1.3128.0
Architecture: x86
Language: All
Update Source: MU
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SSDTBI_VS2012, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\ConfigurationFile.ini
Detailed results:
Feature: SQL Server Data Tools - Business Intelligence for Visual Studio 2012
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio Tools for Applications 2012
Component error code: 0x80044000
Component log file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\VSTA2012_LangsSupport_Cpu32_1.log
Error description: VS Shell 2012 installation has failed with exit code -2147205120.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3436.0&EvtType=VSTA2012_LangsSupport%40Install%400x-2147205120
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\SystemConfigurationCheck_Report.htm -
Batch processing with an image overlay
Is it possible to do batch processing with an image overlay in FW CS4?
I'm trying to resize several hundred images and place rounded corners on them.
If this cannot be done in FW, does anyone know of another program that could accomplish this?Hi Marje,
It's possible to include both resizing and image overlay in a custom Fireworks command that can be used in batch processing. To get started, you could check out this tutorial that deals with the first step.
That article describes how to perform image resize and overlay (in that case, a watermark), and then how to record the steps and turn them into a custom command that can be later used in batch processing.
Once you saved the custom command, click File >> Batch Process, and follow the steps below:
In the first window, select the images you want to process.
On the next screen, open the Commands dropdown menu and select the custom command you created (it'll probably be on the bottom of the list), and click the Add button to include it in the batch process list.
Finally, on the next screen select the location of the processed files, and optionally save the batch script for later use.
Good luck! -
Edit capture time doesn't work for multiple images
Hi all, hope you can help me.
I'm trying to edit capture time for multiple images. I select the images using the grid view, and go to Metadata>Edit Capture Time>Adjust to Specified Date and Time, enter the time, and select "change all." However, it seems that some, or perhaps most of the images don't actually have a new Date Created when this process is done.
I thought perhaps I needed to select 'write metadata to files', but the Date Created seems to revert back prior to writing to the file, or indeed, it doesn't actually change in the first place.
Any ideas?
Thanks,
JThink I've fixed this using the following site: -
http://www.thexlab.com/faqs/helpviewer.html
Will update if that changes.... -
Linked Images : Automatic Folder Creation for linked images?
Best Rgards
Mac OSX 10.9.3
InDesign CC (9.2.1)
Presently: 120 page Blurb publishing with 190 images
I have created a large number of INDD documents that I piece together from many sources,
such as file folders, internet searches, external drives, emails...kind of grabbing things
from all over the place. usually I publish this as a PDF for local and archival use. Sometimes
using this also for newsletters and other ways to distribute documents as pdf and epub.
I never really paid to much attention to LINKED FILES and where they might
be located, as my intent was PDF and you can publish a very
serviceable Pdf without verifying or correcting MISSING LINKS...
NOW, I am working on a higher end 120 page Photo BOOK to have printed on paper.
I did not organise my image assets into a folder, i should have first. Now as I go to
upload to the publisher I find I have to many missing links to images. So I am going
back through the whole project and organising the assets and re-linking...what a lot of work this is.
I was wondering if InDesign supports automatic creation of assets folder?
As you place images, with their links, the program creates a folder and puts a copy of the file there?
I don't see anything about this subject.
I am wondering why not? It would sure make the work flow speed up. Options for
the format, size, pip etc. Does this exist in InDesign and if not
wtf not?
Sure would appreciate anyone's thoughts on this. It is to late now to save this
relinking 190 images, but I realise I need to be better prepared with my assets in the
future. I work on a number of publications, some spontaneously and others
more carefully planned...some sort of auto process for asset-linked-folders
seems a simple enough coding issue. It is 2014 already.
???....best rgards, Thanks for any input on this issue.
WF Posey
Pantelleria ItalyThanks to everyone for these answers. I guess the real answer is "no", Adobe software engineers see no reason to create a script which
will place linked files into a folder. To bad. A really serious and lazy oversight in my view. The package function is helpful if one has already
organised their assetts.
As great as these programs are, this is an oversight of some frustration. As I said in my comments above, it seems an easy enough routine to program
into the app. Why should a user have to worry about collecting details of resources/links for a document?
Even after all these years?
Best regards, thanks to everyone who contributed some thoughts.
WFP -
Set the compression quality for individual images for exporting a PDF?
When are export a PDF in ID, you are given an option to downsample and compress images. My problem is, I want to compress some images more than others. For example, a photo in the document could be downsampled much more than a png logo. Of course I could go and pre-downsample each image to the right size in photoshop, but that can get kind of involved. Is there a way I could at least exclude one particular image from the compression process?
Well, I didn't find any way to do this in ID, but I do believe its a useful thing to do. In Fact, by doing some careful image-dependent compression, I was able to reduce the size of my pdf by half and have the result still look better than a standard uniform compression. What I did was:
first place all the images in the ID file, size and position them as they should be
then, looking at the rulers, note the horizontal size, in inches, of each image in the document
begin with the first image, open it in photoshop. If you want this image at 200dpi, for example, multiply the horizontal size (from ID) by 200. Change the image size in photoshop to this number.
save the image in photoshop as a jpg and compress as appropriate for the image type
go back to ID, open up the links window, select the image you just changed, and click the update link button
do this with all your images
when you go to export a pdf, don't do any compression or downsampling on the images.. they're already optimised
So as you can see you have to have some idea of the ideal target DPI and compression of each image in your document, and it may require some experimenting. But if you know that some images can be lowered much more than others, I recommend this method. As I said, in my case I was able to reduce the file size by half without negatively effecting the pdf appearance. -
GPS Metadata for Managed Images Bug
Alright this is really dumb. Aperture strips the GPS metadata for managed images on a version export, but does not for referenced files.
It just took me 4 hours to figure that out, ug. Metadata is sacred! Always preserve it.My Aperture library uses managed masters.
I too discovered that if I performed *version exports* of geotagged masters the exported images did not retain the GPS data. The problem was the same regardless of whether the masters were .jpgs or RAW files. (Geotagging was performed with Maperture and Maperture Pro; the bug symptoms are the same regardless of which tool was used.)
Additionally, I discovered that if I performed *master exports*, then not only were the geotags retained in the exported files, but that +reimporting those same exports resulted in new masters whose versions would subsequently retain their geotags on version export+.
synonym wrote:
If you Relocate Masters... BEFORE you add GPS metadata using Maperture you don't lose any IPTC metadata. If you then Consolidate Masters... you can then apply GPS metadata to these images within your Aperture library and you will not lose IPTC or the GPS data on exporting the versions.
If I'm reading this correctly it sounds like you can "scrub" your library of the problem by relocating masters and then consolidating them again, and that subsequently applied geotags (and by inference IPTC metadata) will be retained on new version exports. Did I get that right?
However if you already have loads of images in your Aperture library that you have added GPS data to with Maperture and you also have loads of IPTC metadata on them and adjustments what do you do?
I did a backup of the library at this point to a vault. I then restored the vault and GPS data and IPTC metadata was all retained and was also all retained on exporting versions!
And if I'm reading the last sentence of your post correctly, it seems like the consistent behavior between our two situations is that if *images are brought into the library with geotags already in them* - in your case by library restoration and in my case by re-importation of previously geotagged masters - *then the geotags will be retained on subsequent master and version exports*.
Is that a valid conclusion to draw? If so, it sounds like I could workaround the problem of geotags missing from my version exports by either A) relocating and then consolidating my masters, or B) by the three-step process of:
1) geotagging my images,
2) updating the vault, and then
3) restoring my library from the vault.
Maybe you are looking for
-
HT1151 i have a new apple external dvd drive, and i can't get it to work with my iMac?
I have a new apple dvd drive, I was told it will work with my imac, but when i plug it in ...nothing... iv been for update... still nothing. How can i get it to work???
-
Hi Experts, When we are searcing for "Y" Tcode in Menu Tab in "XXX" Role in PFCG,It was not there in menu Tab. But it was there in S_TCODE Object.S_TCODE Object is maintained one.It was not added manually. Ex:When I am searcing for SM59 in menu tab,i
-
Error 1003 occurred at ABAPI Dist Chg and Save VIs.vi
I used to be able to build executable file for my application. However when I upgrade to LV8 and try to build executable file, I got the following message. Error 1003 occurred at ABAPI Dist Chg and Save VIs.vi -> ABAPI Dist Build LLB Image.vi -> ABAP
-
Detecting TextAlignment in a Library based text Object
Hi All, I have several text field objects that are shared (linked) to create a growing group text and button objects that are created at runtime. Oh, TLFtextField's are only being used, but that probably doesn't matter for the this set of issues. I t
-
Hello, I have a situation that I need to run Z-BAPI function before starting mapping in XI. Let me explain scenario with more information. 1. I need to update a order in the SAP. The order may or may not exists in the SAP. 2. We have a Z-BAPI functio