Process group R001 does not exist in MSS for Create Requisition Request.

Hi All
In MSS Under Recruiting we have a link called Requisition Request under this we have Create Requisition Request.
On clicking on this link Create Requisition Request link
i am getting "Process group R001 does not exist "
Pls provide me your input
Regards
Karthi D.

A "Process Group" is part of HCM Processes and Forms....it is how you define which processes can be started/initiated by which Processor Roles. This is done under the configuration under HCM Processes and Forms which is within "HR Administrative Services" (HRAS). In your case, the "manager" processor role would have that process available as part of their process group. Check there.

Similar Messages

Process group R001 does not exist in MSS for Create Requisition

Hi All
In MSS Under Recruiting we have a link called Requisition Request under this we have Create Requisition Request.
On clicking on this link Create Requisition Request link
i am getting "Process group R001 does not exist "
Pls provide me your input
Regards
Karthi D.

A "Process Group" is part of HCM Processes and Forms....it is how you define which processes can be started/initiated by which Processor Roles. This is done under the configuration under HCM Processes and Forms which is within "HR Administrative Services" (HRAS). In your case, the "manager" processor role would have that process available as part of their process group. Check there.

Process group R001 does not exist in MSS

Hi All
In MSS Under Recruiting we have a link called Requisition Request under this we haveCreate Requisition Request.
On clicking on this link Create Requisition Request link
i am getting "Process group R001 does not exist "
Pls provide me your input
Regards
Karthi D.

Hi
Any updates on this
Regards
Karthi D.

Process group R001 does not exist Error in MSS in Create Requisition Reques

Hi All
In MSS Under Recruiting we have a link called Requisition Request under this we haveCreate Requisition Request.
On clicking on this link Create Requisition Request link
i am getting "Process group R001 does not exist "
Pls provide me your input
Regards
Karthi D.

Hi
Any updates on this
Regards
Karthi D.

Error during install PCK - Group GUESTS does not exist

Hi,
I'm installing PCK 3.0 SR1 on Web AS 6.40 Java SR1 and getting an error during phase "Create J2EE User". The following error is from the java.log file:
--- INITIALIZE ---
--- STARTING SETTING PROPERTIES ---
--- STARTING USER CREATION ---
com.sap.security.core.server.userstore.UserstoreException: Could not add user pckuser to group GUESTS
     at com.sap.security.core.server.userstore.GroupContextUME.engineAddUserToGroup(GroupContextUME.java:314)
     at com.sap.engine.services.security.userstore.context.GroupContext.addUserToGroup(GroupContext.java:168)
     at com.sap.engine.services.security.userstore.RemoteGroupContextImpl.addUserToGroup(RemoteGroupContextImpl.java:112)
     at com.sap.engine.services.security.userstore.RemoteGroupContextImplp4_Skel.dispatch(RemoteGroupContextImplp4_Skel.java:86)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:294)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:183)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:119)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:159)
Caused by: com.sap.security.api.NoSuchGroupException: Group with id="Group "GUESTS" does not exist." does not exist
     at com.sap.security.core.imp.GroupFactory.getGroupByUniqueName(GroupFactory.java:853)
     at com.sap.security.core.server.userstore.GroupContextUME.engineAddUserToGroup(GroupContextUME.java:309)
     ... 12 more
predecessor system -
com.sap.security.core.server.userstore.UserstoreException: Could not add user pckuser to group GUESTS
     at com.sap.security.core.server.userstore.GroupContextUME.engineAddUserToGroup(GroupContextUME.java:314)
     at com.sap.engine.services.security.userstore.context.GroupContext.addUserToGroup(GroupContext.java:168)
     at com.sap.engine.services.security.userstore.RemoteGroupContextImpl.addUserToGroup(RemoteGroupContextImpl.java:112)
     at com.sap.engine.services.security.userstore.RemoteGroupContextImplp4_Skel.dispatch(RemoteGroupContextImplp4_Skel.java:86)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:294)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:183)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:119)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:159)
Caused by: com.sap.security.api.NoSuchGroupException: Group with id="Group "GUESTS" does not exist." does not exist
     at com.sap.security.core.imp.GroupFactory.getGroupByUniqueName(GroupFactory.java:853)
     at com.sap.security.core.server.userstore.GroupContextUME.engineAddUserToGroup(GroupContextUME.java:309)
     ... 12 more
Has anyone experienced the same problem? what is the solution?
Thank you.
Regards,
Robert

Hi Robert,
Check note 792456.
Regards,
Vijay

Function group BUS1001 does not exist

Hi Guys,
I have SAP QIM system which is built on NetWeaver Stack. It pulls all the data from another ECC system.
I am facing an issue while doing F4 on the field of Material. Ideally it should pull all the values there in E60 System but it is giving me an error
"Function group BUS1001 does not exist".
Can someone help me with this?

Hi,
Sometimes the navigation Index for FM/program needs updating. Try this, open the FM and in the menu go to Utilities then 'update Navigation Index'.
Best of luck,
David

Useradd: group 'nogroup' does not exist

How so?
#useradd --home /home/vsftpd --gid nogroup -m --shell /bin/false vsftpd
useradd: group 'nogroup' does not exist
I saw never this. How do I create nogroup group?

I guess that Arch is following the Linux Standard Base Core Specification (ISO/IEC 23360 Part 1:2007(E)):
Table 21-2 Optional User & Group Names
User Group Comments
nobody nobody Used by NFS

Counter group "WEB_SYSTEM_CAPACITY" does not exist.

Hi all;
Why Im having this issue.
The Critical message is:
Counter group "WEB_SYSTEM_CAPACITY" does not exist.
Product: IronPort S370 Web Security Appliance
Model: S370
Version: 7.1.3-011
After I received the first notification, I can´t see any kind of report in Reporting->Overview.
Regards;

Hi,
According to the error message,
The template ""0ADHOC" does not exist in the BI system. It has to be transported too.
OR
Logon to R3 and check in Transaction SE38 with program "RS_TEMPLATE_MAINTAIN_XX".
You will see
                                     Template ID :
                                     Reusable Web Item ID :
                                     Version :
Give "template name" and see what is the version.
If it is "D" then please change that to version "A". and check if issue persist.
Hope this helps.
Regards,
Mani

Cluvfy returns Path "/tmp/" does not exist and cannot be created on nodes

Hi,
I'm installing Oracle RAC for SAP in AIX 5L.
After run Pre-check for cluster services setup it returns the next message:
Path "/tmp/" does not exist and cannot be created on nodes
This meessage is happening after Checking node reachability and Checking user equivalence phases.
This is my complete log:
pr_bd01/oramedia/clusterware/Disk1/cluvfy/> ./runcluvfy.sh stage -pre crsinst -n pr_bd01,pr_bd02
Performing pre-checks for cluster services setup
Checking node reachability...
Node reachability check passed from node "pr_bd01".
Checking user equivalence...
User equivalence check passed for user "oracle".
ERROR:
Path "/tmp/" does not exist and cannot be created on nodes:
pr_bd01
Verification will proceed with nodes:
pr_bd02
Pre-check for cluster services setup was unsuccessful on all the nodes.
The /tmp is a shared filesystem and oracle user can write and read it
Oracle user id is the same in both nodes
Group dba id is the same in both nodes
Group oinstall id is the same in both nodes
The primary group for Oracle user is oinstall
Where can my problem be ?
Thank you
Edited by: user8114467 on 27/02/2009 07:17 AM

Hi,
Even if this is not resolved from above stuff then do the following
[oracle@node1] ssh node1 date
[oracle@node2] ssh node2 date
Note that it is doing the ssh to itself rather than the remaining node(s). Usually people do forget to do atleast once the ssh to itself.
Talok Khatri

SSPU issue: Cache directory does not exist, and couldn't create a new downl

I have installed SSPU and created an offer over there. When I run my offer it gives the error:
Cache directory does not exist, and couldn't create a new download cache directory.
Can anyone tell me the root cause and workaround for this issue?

Hi
Try deleting the "offer" directory from SSPU home and then delete the offer from Sub-Client . Restart client and then add the provider . Start pushing the content from SSPU and see if the issue still persists .
Thanks
Srinath

Field 'Contract Period' does not exist in definition for business component

Hi everyone
I create a Field "Contract Period" in BC "Quote" with an extended table and put it in the applet view "Quote Full Form Applet" the field works fine in the view, we can update and insert information in it and shows perfect in the database also.
Our problem is when create a Integration Object for reports in BIP Reports the system said something like this when we try to generate the sample data:
ObjMgrLog     Error     1     0000002d4cd016bc:0     2010-11-02 13:18:39     (adptutils.cpp (5715)) SBL-EAI-04376: Method 'FieldValue' of business component 'Quote' (integration component 'Quote Template') returned the following error:
"Field 'Contract Period' does not exist in definition for business component 'Quote'.
We compiled the BC and the IC, and did the Deployment of the IC in Tools but it didn't work, the thing here is if I remove this field the report works fine. Is there any other component or Object that we have to compile to get Siebel recognition?
Any ideas?
Thanks in advance
Edited by: user7286211 on Nov 2, 2010 8:05 PM

To do the same change with the transaccion FB02 y FB03, create an enhancemente point in the program: SAPMF05L dynpro: 1301, module: DYNPRO_MODIFIKATION, at the of perform open_fi_dynpro_mod and write:
LOOP AT SCREEN.
IF sy-tcode = 'FB02'.
    IF screen-name = 'BSEG-HKTID'.
      screen-input = 1.
      screen-invisible = 0.
      screen-active = 1.
      screen-output = 1.
      screen-group4 = ' '.
      MODIFY SCREEN.
      EXIT.
    ENDIF.
elseif sy-tcode = 'FB03'.
      IF screen-name = 'BSEG-HKTID'.
      screen-input = 0.
      screen-invisible = 0.
      screen-active = 1.
      screen-output = 1.
      screen-group4 = ' '.
      MODIFY SCREEN.
      EXIT.
    ENDIF.
endif.
ENDLOOP.
and, all ready.

Help on issue "SGD/USD - rate does not exist in scenario for"

Hi Experts,
Hope that someone may help in issue that I can't seem to fix in TXAK Option pricing engine.
When trying to generate market data, the program is giving me error message number T0478 - "SGD / USD - rate does not exist in scenario for".
Your help please to inform me what customizing need to be done to troubleshoot this issue!
Thanks,
David

Hi Mridul,
I also checked this setting and the exch. rate for SGD/USD has already been set previous to my error. Also, this configuration allows the exch. rate to be valid from a certain date so I don't think that this is what Ravi is referring to..
From what Ravi said, I need to set an exchange rate for the Evaluation Type that I am using. OB08 doesn't determine which evaluation type is being used.
Thank you very much for your help, and please do let me know if the question isn't clear so I may explain more.
Regards,
David

SQL Server Browser service group does not exists. Check for earlier failures in the setup. during sql express 2008 R2 setup

Hello,
I have an issue while installing SQL Server 2008 R2 Express. When I was installing SQL Server, I occurred an error message as shown in the figure.
I have followed couple of links as in
this and
this links but it did not fix the issue. Can anyone help me on this issue?
Regards
Gaurav

Hi gauravroondhe2306,
According to your description, you fail to install SQL Server 2008 R2 express with the error that SQL Server Browser service group does not exist. Please help to post SQL Server setup error log for analysis. By default, SQL Server setup summary and detail
logs are located in C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
Based on my research, this issue could occur when you install SQL Server on a Domain Controller, or the machine's name has been changed and the browser service group is named with the original machine's name.
To troubleshoot the issue, you could follow the solutions below.
1.Use SQL Server 2008 R2 Best Practice Analyzer to detect if SQL Server is installed on a domain controller. If SQL Server is installed on a domain controller, please demote your machine from being a domain controller and install the SQL Server again since
it is not recommended to install SQL Server on a domain controller.
2.Check if the name of local user group matches the machine's current name. If it doesn't match, please change the name of the local user group accordingly, and install SQL Server again. For more information about the process, please refer to the article:
http://geekswithblogs.net/TedStatham/archive/2014/04/15/installation-problems-with-sql-server-2008-r2-express.aspx
Regards,
Michelle Li

Standard SAP report group 6PP3 does not exist

A user is attempting to run the transaction S_ALR_87013544 and receives the error "program 6PP3 does not exist". I used gr53 to display report groups it is not in the list.
I cannot generate 6PP3 either. I cannot create 6PP3 because it is a standard report group
Any ideas?

1.   Use GR59 IN THE <TRG> client
     a. 300 in this case
     b.     SOURCE client = 000
     c.     Leave all fields blank hit EXECUTE
     d.     Select the report group to generate from the list
        i. BPP3
       ii. Select the CONFIRM button

E-REC EHP5 - Prerequisites for MSS user for Create Requisition request

We are implementing E-REC EHP5. As a MSS user when line manager tries to create requisition request on portal, although it takes on a new page called "Stat Processes" we are getting error "no data available" and hence can not proceed on that page. We have assigned R3 role "SAP_RCF_REQUISITION_REQUESTER" to the line manager and on portal we have assigned him MSS user role.
Is there any other prerequisite for the said functionality of Create Requisition request.

Hi,
In the IMG, navigate to :
Personnel Management -> HR Administrative Services -> Configuration of Forms/Processes -> Process Configuration
-> IMG activity "Test Process"
Enter the process name "HR_MSSRCF_REQUISITION" and execute (F8). You should see the form scenario data in table view. Use the F4 help in the "Field Value" column for those entries where the "Value Help" column is checked. You should get a pop-up with the field values. If not you need to make sure that HR_MSSRCF_REQUISITION iis linked to form scenario S_HRMSSRCF_REQUISITION in table T5ASRPRSCFORM. Also make sure that you have the last SP for the ERP common parts BP 1.51 installed in your portal. Finally assign role SAP_RCF_RECRUITER_ERC_CI_2 and SAP_RCF_MANAGER to your recruiter.
Hope it helps,
Kind Regards
Christine

Process group R001 does not exist in MSS for Create Requisition Request.

Similar Messages

Maybe you are looking for