Process has no predecessor while creating process chains for Inventory
Hi Experts,
I have created process chain for Inventory and this inventory cube have compression also.so, i included compression of the infocube after create index.
Here while i am checking the chain ,am getting the error called : PROCESS HAS NO PREDECESSOR.
Please give some inputs,what does it mean and how to solve.
Thanks
Lakshmi
Hi Murali,
Thanks for your reply.
You mean to say that i should not include BX-IP,DTP in the list.as we know that this is only one time job.
But in prodn system with out including BX in the list,how to initialise for the first time.
So,first time we need to manually run the IP,DTP in prodn system.
Plz let me know.
Note:Murali, In the process chains list after create index,i dragged "COMPRESSION OF THE INFOCUBE" and i specified 0IC_C03 CUBE and continued.
Along with compression of the infocube there is one more box has come into picture i.e SIGMA ADJUST(GENERATED FROM COMPRESSION ZPC_INV_0IC_C03_COMPRESSION) like that its came.
Do we need to remove that or should i keep it in the list.
Thanks
LaxmanNaidu
Similar Messages
-
Error while creating process instruction sheet in COR2
While creating Process instruction sheet, the following error is occuring. Please guide me to resolve the issue.
Define variable QTYPRODUCED for default value
Message no. CPOC110
Diagnosis
In the process instruction, variable QTYPRODUCED is defined for the value that you want the system to propose when data is entered in the PI sheet. This value does, however, not exist because it has not yet been defined as a variable.
If you want to use a variable in a process instruction, however, you must first have defined it in a preceding process instruction or in the same process instruction.
Procedure
Define variable QTYPRODUCED in one of the preceding process instructions or in the same process instruction.
Define Variable
Regards
Kumar1. Assign characteristic PPPI_VARIABLE to the process instruction before the message characteristic to which the variable is to refer
2. Assign the required variable name to characteristic PPPI_VARIABLE. -
is there an EASY way to submit podcasts to the itunes store? i've tried creating podcasts in garageband, then somewhere after wordpress itunes doesn't recognize the feed.
my process has been (i am open to suggestions for other free and EASY services/methods):
garageband : create & edit audio. add 1400x1400 image.
share to itunes.
drag file to desktop.
upload .m4a file to google drive.
create a link post in wordpress using "podcast" tag & create "podcast" category.
click on "entries rss" in wordpress, which takes me to the rss subscribe page (which is basically just my wordpress address with "/feed" at the end.
i copy this url.
go to itunes store > then "submit a podcast"
itunes gives me the error message "we had difficulty downloading episodes from your feed."
when i try to subscribe to my podcast in itunes, it does, but gives me no episodes available.
i went back into wordpress and changed settings/ reading settings to : "full text" from "summary"
still the same error message.
i added a feedburner step after wordpress but got the same errors. i don't think i should have to add feedburner.
wordpress seems to be encapsulating the rss, what am i doing wrong?
this so much easier when you could go directly from garage band to iweb to mobileme; i miss those apple days (also idisk).if anyone has a super EASY process, i would LOVE to know what it is. EASY, meaning no html and also free. there are many free online storage systems available, many of which i currently use. the above process was just me trying to figure it out, if you have an easier method, please share. thank you so much!
-
Error while creating a task for creating an generic task /app/dac/CustomSQ
Hi ,
I have created a sql file in DAC server /app/dac/CustomSQLs/ ,just to fire an update sql in database
In DAC task tab i have created a task with the following:
Command for incremental load :/app/dac/CustomSQLs/DBNameBeforeLoad.sql
Primary source :flatfileconnection
target source:DBCONNECTION_OLAP
Execution type:SQL FILE
Task phase:GENERAL
I created subject area and assembled ,then created a Execution plan.
When i try to execute this EP ,it shows the following error in DAC log:
ANOMALY INFO::: Error while creating a task for creating an generic task /app/dac/CustomSQLs/DBNameBeforeLoad.sql
MESSAGE:::/app/dac/CustomSQLs/DBNameBeforeLoad.sql - invalide template name!
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.TaskInitializationException
com.siebel.analytics.etl.etltask.SQLFileTask.doInit(SQLFileTask.java:69)
com.siebel.analytics.etl.etltask.GenericTaskImpl.init(GenericTaskImpl.java:194)
Does my above configuration is correct ..?verify the following settings:
1. mapping of ECC plant and storage location and logical system number with the appropriate availability group code since this links the stock types in EWM to ECC org elements (SPRO -> EWM -> Interfaces -> ERP Integration -> Goods movement)
2. ensure the availability group configuration is correct (SPRO -> EWM -> GR Process -> Configure availability group for putaway) - check all applicable nodes in this configuration since the availability group code is assigned in the pertinent storage types -
Error while Creating a formula for field AZNOR (T-Code : OP17)
Dear Experts,
i am facing a problem in Transaction OP17 while creating a formula for field AZNOR ( No of indivual capacity in work center) in work center (T-Code : CR02) .
It shows the error
The data object "F" has no component called "AZNOR''..
Please let me know the solution..
Thanks & Regards
Birendra KumarHi,
I have the same problem.
Could You tell me witch is the correct origin?
Thanks a lot!
Bye
Laura -
Error while creating logical port for Consumer Proxy in SOAMANGER
Hi,
While creating logical port for my consumer proxy in SOAMANGER, I am getting the error shown below
SRT Framework exception: HTTP: Current user does not have the required authorization to access the HTTP destination
I have searched in the forums but none of the answers helped me.
I have specifed my PI user ID and password and the user has the followwing roles assigned to it.
SAP_BC_WEBSERVICE_SERVICE_USER
SAP_BC_WEBSERVICE_ADMIN_TEC
SAP_BC_WEBSERVICE_CONSUMER
SAP_BC_WEBSERVICE_ADMIN
Current user in the error message refers to the PI user that i have specified or the user with which i have logged in the backend ABAP system?
Please help me reslove this issue.
Thanks and regards
Sreehari NambiarHi,
Please add the following roles as well.
SAP_BC_WEBSERVICE_ADMIN_BIZ
SAP_BC_WEBSERVICE_DEBUGGER
SAP_BC_WEBSERVICE_OBSERVER
Also make sure that you are doing the role comparison after adding all SAP* roles in your profile.
Let me know if this works?
Thanks,
Sridhar -
How can I quit the photos app? It has been trying to create a library for hours but nothing happens. when I try to quit, it won't let me. Have just upgraded from iPhotos so don't want to lose any content.
How can I quit the photos app? It has been trying to create a library for hours but nothing happens. when I try to quit, it won't let me. Have just upgraded from iPhotos so don't want to lose any content.
Force-quit Photos as recommended by Arsenal1607.
Make backup of your iPhoto Library and run the iPhoto Library First Aid tools to repair the permissions on your library and rebuild the iPhoto Library.
To launch the First Aid Tools hold down the alt/option and the command key simultaneously while double clicking the iPhoto Library to launch the iPhoto Library First aid tools. You'd to hold down both keys firmly and long enough, until the First Aid panel will appear.
Try both the options "Repair Permissions" and "Rebuild library". Then try again to migrate the iPhoto Library to Photos by dragging it onto the Photos icon in the Dock.
Make sure, you have plenty of free storage. Don't try the migration, if you are running out of storage. -
Error occuring while creating a Delivery for Stock transport order
Hi,
I am getting error while creating the delivery for thr stock transport order.The error message is given below.
Error Log for coll. run 0001248218
4 6000038321 000010 Only 0 ST of material F784100 available
4 6000038321 000010 An item with no delivery quantity is not permitted. Item will be deleted.
4 6000038321 000020 Only 0 ST of material F784100 available
4 6000038321 000020 An item with no delivery quantity is not permitted. Item will be deleted.
4 6000038321 000030 Only 0 ST of material F784100 available
4 6000038321 000030 An item with no delivery quantity is not permitted. Item will be deleted.
The stocks are present in the plant.
Can anyone help me to solve this issue?
Thanks
SrinivasanHi,
Check in
SPRO--IMG-MM-IM and PI---stock determinationassign stock determination in applications---Inventory management
Check for 641 or 647,there is a SD rule assigned.
Regards,
Deepak. -
Error while creating datasource userdsn for oracle 10g Errorcode (998)
while creating datasource userdsn for oracle 10g i am getting error "The setup routines for the oracle in OraDb10g_home1 odbc driver could not be loaded due to system error code 998" please give reply soon
Thanks for your reply , Steve.
I noticed that there is a default datasouce on the EM with the following parameters:
<data-source
class="com.evermind.sql.DriverManagerDataSource"
name="OracleDS"
location="jdbc/OracleCoreDS"
xa-location="jdbc/xa/OracleXADS"
ejb-location="jdbc/OracleDS"
connection-driver="oracle.jdbc.driver.OracleDriver"
username="scott"
password="->pwForScott"
url="jdbc:oracle:thin:@localhost:1521:oracle"
inactivity-timeout="30"
/>
The location and xa-location attributes that I use for my "test" data source are the same as the default one. So, could this be the issue?
What should be the values for location and xa-location attributes from my "test" data source?
Any help will be greatly appreciated.
Thanks,
Shyam -
Getting the following error while creating the model for webdynpro app.
Plugin Name: Web Dynpro Model Editor Services
Plugin ID : com.sap.ide.webdynpro.service.modeleditor
Class :ap.ide.webdynpro.modeleditor.wizards.model. creation.ModelDialog
Method : nextPressed
Exception : org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NoClassDefFoundError)
This is the error i am getting while creating the model for the webdynpro application. Can some one help ?
Thanks & Regards
Lalithhi
This error occurs mainly due to the reason that particular plugin is not there in the NWDS.
So please try to reinstall the NWDS or try tracing out whether that particular plugin is there or not.
Thank,
kris -
Bins problem while creating goods receipt for production order.
Hi All,
I am facing a problem with selection of bins while creating goods receipt for production order in transaction MB31 and MBBE.
The order of filling bins is with respect to storage Unit not by document no, Please suggest something.
The scene is like that.
The bins are not filled in the proper sequence, the system checks for the empty bins and filled those later on.
like this,.
Typ StorageBin SC SS Stock Avail.st BUn GR Date DocumentNo Storage Unit Time
SLoc Batch Re IA PutawayS Pick qty Cert. No.
VN1 106A088 0 0 CS 01/25/2010 4739297 1005721391 10:00:59
100 0001020069 60 0
VN1 107B076 0 0 CS 01/25/2010 4739298 1005721392 10:01:01
100 0001020069 60 0
VN1 108B076 0 0 CS 01/25/2010 4739299 1005721393 10:01:04
100 0001020069 60 0
VN1 109A077 0 0 CS 01/25/2010 4739300 1005721394 10:01:06
100 0001020069 60 0
VN1 110B079 0 0 CS 01/25/2010 4739301 1005721395 10:01:08
100 0001020069 60 0
VN1 106B088 0 0 CS 01/25/2010 4739302 1005721403 10:01:11
100 0001020069 60 0
VN1 123B158 0 0 CS 01/25/2010 4739303 1005721389 10:01:13
100 0001020069 60 0
VN1 124A160 0 0 CS 01/25/2010 4739304 1005721390 10:01:15
100 0001020069 60 0
VN1 118A133 0 0 CS 01/25/2010 4739305 1005721396 10:01:17
100 0001020069 60 0
VN1 119A128 0 0 CS 01/25/2010 4739306 1005721397 10:01:20
100 0001020069 60 0
VN1 120B162 0 0 CS 01/25/2010 4739307 1005721398 10:01:22
100 0001020069 60 0
VN1 121B159 0 0 CS 01/25/2010 4739308 1005721399 10:01:24
100 0001020069 60 0
VN1 122B159 0 0 CS 01/25/2010 4739309 1005721400 10:01:26
100 0001020069 60 0
VN1 123B159 0 0 CS 01/25/2010 4739310 1005721401 10:01:29
100 0001020069 60 0
VN1 124B160 0 0 CS 01/25/2010 4739311 1005721402 10:01:31
100 0001020069 60 0
Thnks you,
Anmol.
Edited by: anmol112 on Jan 25, 2010 10:34 PMno replay, clossing threat.
-
Save Query - An error occurred while creating connection strings for the query
A workbook trying to edit and reload I get the following error "Save Query - An error occurred while creating connection strings for the query" No Power Pivot data model or anything.
I am getting the same error when editing a Power Query in an Excel spreadsheet. It happens when I change a Group By step to do a Sum instead of Count Rows.
-
Getting junk character while creating PDF image for Hebrew language
Hi,
I have a issue while creating PDF image for invoice in Hebrew language . I can able to create a PDF image but it' showing junk characters instead of Hebrew characters.
Please provide your inputs to resolve this issue.
Thanks,
Joy.Hi ,
I am also facing similar problem.My system is unicode enabled and i am using the device type I8SWIN and courier font .
But still i am getting junk characters for Hebrew characters in PDF.
Can any one suggest me what is the exact device type we have to use for unicode enabled system and also for non unicode enalbled system.
Is any related to truetype font here .Kindly let me know .
Thanks for your valuable inputs .
PRadeep.... -
While creating Process Order system has to validate the Batch field
Hi All,
While creating the Process Order system has to validate the Batch field which comes under Goods Receipt tab. Please let me know is there any standard user-exit is there for this requirement.
Regards
NaveenDear Swapnil,
Thanks for the reply,
At the time of creation of process order I am entering the External Batch no as per the logic i.e. first two letters as 08 (for year), next two letter as section 51 (for solid mfg section, which i am planning to maintained in the Z table) and last three letters as 001 (for serial no in this section). so batch no is 0851001.
Now i want to validate these all letters as per the above logic i.e first two letter should be cross check with current year, and next two letter with Z table for section and last three letters for sr no with previous batch, which is already created for this section.
Now can you please help me to find out the function exit or screen exit to validate the above requirement at the time of creation of process order i.e. COR1, under the Goods receipt tab.
Thanks in advanced
Naveen -
Error while creating process order
Hi,
While creating a process order I am getting an error.
The error is :
Error while calculating costs for order xxxxxxx.
how to solve this?Dear,
please open this prd order in change mode CO02 then press tab button cost calculation near release button in order header screen now do not save this order go to edit >log> cost calculation
There it will show the error tht occured during costing
Please refer this thread,
Cost error when saving production oredr
Regards,
R.Brahmankar
Maybe you are looking for
-
How to use 1 edge animation in multiple pages without duplicate files?
Hi, I want to display an animation on multiple pages that are all located in there own respective folders. I want to be able to move then animation files into it's own dedicated folder e.g. /includes/edge folder where I can still use this animation i
-
Hello Friends, I have couple of JSP pages. The URL for each of the Jsp page shown in browser looks somelike as follows. http://order.xyz.com/?p_mycode=2Mon_Fr&mnid=in_ss_ppo_hino_soos What I want ti achieve is as follows:-- In my Jsp page, I should b
-
What do I update to after Mac OSX 10.5?
My mac book is still running on the OSX 10.5.8, but I've been having problems with safari shutting down when I watch t.v or movies. What should I update to next?
-
Where are my pictures
-
Logic pro 9 quit unexpectedly while initializing Core audio
i've installed my logic studio 9 and it does not work, it quits unexpectedly while initializing Core audio I am using mbox 2 mini but i don't like protools, i deleted it. I've installed the digidesign standalone core audio drivers 8.0.3 which is comp