Process HU by VL74
Hi ,
In My program I have internal table for HU processing that is to be processed by transaction VL74 in background.
But call transaction is not working for this.so for which function module or Bapi i can do this job in background?Please help me out.
Thanks
Prince
.
Similar Messages
-
VL74-No messages for initial processing exist
Hello All,
At the time of executing tcode VL74 i am getting the following message
No messages for initial processing exist
Message no. VN108
Could anyone please let me know what settings I need to maintain for the same, I have maintained the output type determination procedure and also maintained condition records for the same besides assigning output type in the required output procedure.
Kind Regards
Atul Keshav.Hello Atul,
You need to check 2 things:
- In TCode NACE, Application: V6-Handling Units, your output type should be active for Multiple issuing in General Data tab,
- In TCode VL74 overview. the input parameters for processing mode should be 2 - Repeat processing which 1 by default
Thanks & Regards
JP -
VL74 - Outputing E128 gives error
On VL74 (output from handling units) E128 output it shown.
Certain E128 outputs works fine whilst other do not work as follows :-
When using preview the following message is returned :-
Preview = Output could not be displayed (it may not be complete)
Message no. VN069
When trying to output the log shows the following error :-
Note: Log not from current processing run
Processing log for program RLE_EAN128_LABEL routine ENTRY
Check digit for value 1000013650 is incorrect -- 1000013656 would be correct
Message no. LE_SHP_BF_BARCODE016
Diagnosis
In certain circumstances, the handling unit does not have a SSCC number.
Procedure
Check in Customizing for the handling unit whether a SSCC number was assigned during number assignment to the packaging material type.
R/3 Customizing IMG -> Logistics - General -> Handling Unit Management -> Basics -> Define Packaging Material Types
Regards.
Phil.Hi
Make sure you have maintained correct settings in below IMG:-
1) SSCC Generation Acc. to EAN128-->Maintain SSCC Generation for Each Plant / Storage Location
2) HUM>Basics>Technical Basics
3) And maintain the settings for Output determination for HU in NACE transaction
Rgds
Ramesh
Edited by: ramesh04 on Nov 29, 2010 5:40 PM -
Dear All,
My requirement is to develop a new form for a output type and the print is to be taken from VL74.
Output from handling unit.
I can see the program name is SD70AV6A.
Now tell me what i should do , so that i can take the print of handling units from VL74 as per the required format.
should i copy the program and design my form accordingly , or what (if i copy will me VL74 TX will be there ?)
Regards
RajendraVL74 is not really a print program. It is rather a program which processes output types of handling units.
In it you can find coding like CALL FUNCTION 'WFMC_MESSAGES_PROCESS'.
So yeah it is something like RSNAST00.
Copying this wont help you until you need to change the behaviour of this frame program.
when you need to do a new output type for HU´s then you need to create a new driver program, a new form, and create the output type customizing, specifing the according form, driver program and maybe conditions. Also dont forget to maintain this new output type in the output scheme for HU´s.
depending on the requirement of your form you may not need to create a new driver program, but using one that already exists, or copying one that already exists and modifying this one. Depending on your requirement you also may be able to use an already existing form, or copying that and modifying this one.
regards -
Error while invoking a process
Hi Team,
I get the following error while invoking a process.
ALC-DSC-125-000: com.adobe.idp.dsc.registry.EndpointNotEnabledException: SOAP endpoint is not enabled for: ExtractingXML/ReadResource
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.validateEndpoint(AbstractMes sageReceiver.java:258)
at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invokeCall(SoapSdkEndpoint. java:136)
at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invoke(SoapSdkEndpoint.java :81)
at sun.reflect.GeneratedMethodAccessor755.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.axis.providers.java.RPCProvider.invokeMethod(RPCProvider.java:397)
at org.apache.axis.providers.java.RPCProvider.processMessage(RPCProvider.java:186)
at org.apache.axis.providers.java.JavaProvider.invoke(JavaProvider.java:323)
at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:454)
at org.apache.axis.server.AxisServer.invoke(AxisServer.java:281)
at org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:699)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper. java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at com.adobe.idp.dsc.provider.impl.soap.axis.InvocationFilter.doFilter(InvocationFilter.java :43)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at com.adobe.idp.um.auth.filter.CSRFFilter.doFilter(CSRFFilter.java:41)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletC ontext.java:3496)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2 180)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Can anyone please help me with this error.I checked my server (which has all the default Adobe services) and the only service I have that comes close is:
the Repository service's "Read Resource Content" operation. In the list that comes up as RepositoryService.
The Barcode's Extract to XML service. In the list that comes up as BarcodedFormsService
Neither of these is an exact match to the error. Is your process calling a sub process you built? Does that service actually exist on the server? If you do a record/playback (in workbench) on which step does the process fail?
If you look through the entire list of SOAP services (in Adminui) are any of them disabled? -
Logical GR in Third Party Process
Hi Friends
There is logical GR involved in third party process. What if we do not want to trigger it?very useful thraed for your Qn-
[stock not updating after doing MIGO (gr) for third party sales |stock not updating after doing MIGO (gr) for third party sales;
BR
Raj -
EH&S WWI for GLM print request processing
Hi all,
we installed EH&S WWI for GLM print request processing scenario, following the note:"1394553", but when we try to print we receive this error from WWI:
Start Function 'WWI_PRINTREQUEST_CREATE'
Initializing parameters
Receiving data from client
calling RfcGetData returned 0
receiving data lasted: 0.0 sec.
Retrieving print request data from RFC interface
Using Temp Directory E:\WWI\TEMP\BSV100000000000062
Delete files in E:\WWI\TEMP\BSV100000000000062
Creating text file E:\WWI\TEMP\BSV100000000000062\r000000000062.val
Writing data to text file 39 lines, 1009 characters
Updating print request status from 0 to 1
[DB time] Writing print request lasted 9 ms
Start processing command 'Create print request' in synchronous mode
Creating print request 000000000062
WwiSapDms::retrieveDocument: RFC error when calling ABAP function moduleRFC connection is not Unicode
WwiSapDms::retrieveDocument: RFC error when calling ABAP function module
key : RFC_ERROR_SYSTEM_FAILURE
message : See RFC trace file or SAP system log for more details
Reading SBV document IB0120510 from Cache failed
WwiCacheRead resulted with -1
Updating print request status from 1 to 5
[DB time] Writing print request lasted 4 ms
##### Command 'Create print request' finished with status E #####
Storing ERR file E:\WWI\TEMP\BSV100000000000062\l000000000062.err into DMS succeeded
22 lines
Sending data to client
calling RfcSendData returned 0
sending data lasted: 0.0 sec.
Elapsed time : 0.1 sec.
We don't understand what kind of RFC or what part of customizing we have to check, could you please help us?
Thanks,
ChristianDear Pugal
we are not using GLM + and I am not sure about the technqiue used there to handle load balancing. Regarding general WWI setup I assume you know this Note: EH&S: Availability and performance of WWI and Expert servers
On the top there is a further SAP Note abvailable which might be of interest. This is referenced here:
http://de.scribd.com/doc/191576739/011000358700000861002013-e
May be check OSS note: 1958655; OSS Note 1155294 is more related to normal WWI stuff; but may be check it as well. May be 1934253 might help better
May be this might help.
C.B.
PS: may be check as well: consolut - EHS_MD_140_01 - EH&S-Management-Server einrichten
The load balancing of synchron WWi servers is donein the "RFC" layer, therefore you have no inffluence here, for asynchron WWI servers you can do a lot to manage the WWI load balancing by using "exits" etc. -
If-statement in application-process
Hi,
First I will tell you which APEX I am using: 3.0.1
Ok, I have got a form where there are 4 fields:
P13_ACCTNO (Popup LOV (fetches first rowset)),
P13_LOCATION_NAME(Text Field (Disabled, saves state)),
P13_COMP_ACCTNO( Popup LOV (fetches first rowset)),
P13_LOCATION(Text Field (Disabled, saves state))
In my table, the company is always filled in, no null values (but it is not the PK, this is the acctno). But location may be null.
When I select a location (popup will only show fields which are filled in), then the other fields are filled in as well. So the Location (number) and the acctno is the same.
Now, when I select a comp_acctno, the rest of the fields are filled in automatically. But the Location (number) will remain from the first select, although no location might be there.
So I have got 2 javascript codes on the page and 2 applicationprocesses and 1 application item.
I would like to have an if-statement in my application-process (instead of " HTP.prn ('<item id="P13_LOCATION">' || v_null || '</item>');", something like:
if :p13_location_name is null then
:p13_location = ' ';
end if;
But I don't know how to put this into the following code, because it is a mixture, which I don't understand completely.
DECLARE
v_acctno primemines.acctno%type;
v_company primemines.company%type;
v_mineloc primemines.mineloc%type;
v_commodity primemines.commodity1%type;
v_null varchar2(5);
CURSOR cur_c
IS
SELECT acctno, mineloc, company, commodity1
FROM primemines
WHERE acctno = TO_NUMBER (:temporary_application_item);
BEGIN
FOR c IN cur_c
LOOP
v_acctno := c.acctno;
v_company := c.company;
v_mineloc := c.mineloc;
v_commodity :=c.commodity1;
END LOOP;
v_null := '';
OWA_UTIL.mime_header ('text/xml', FALSE);
HTP.p ('Cache-Control: no-cache');
HTP.p ('Pragma: no-cache');
OWA_UTIL.http_header_close;
HTP.prn ('<body>');
HTP.prn ('<desc>this xml genericly sets multiple items</desc>');
HTP.prn ('<item id="P13_ACCTNO">' || v_company || '</item>');
HTP.prn ('<item id="P13_LOCATION_NAME">' || v_MINELOC || '</item>');
HTP.prn ('<item id="P13_COMMODITY">' || v_commodity || '</item>');
HTP.prn ('<item id="P13_LOCATION">' || v_null || '</item>');
HTP.prn ('</body>');
and also I have discovered that the automatically filling of the fields is only working sometimes (i don't know whether it depends on the company I select). Any ideas, why this is happening?
could somebody help me with the code please?
Thanks,
regards,
DeniseHi,
@Chad: thanks for the code, I think it works (UPDATE: no, it does not work :-( )
now i am just left with the other problem that it works only sometimes
@user512746: yes, i guess you have understood correctly. I have changed the items P13_ACCTNO source used to "always replace" and taken out the default value, which I had set to &P13_ACCTNO.
But it still only works partly, I don't know why?
any other ideas?
Thanks so much for your help so far, both of you.
Regards,
Denise -
ANY SY-INDEX REFLECT CHANGES WHEN CONTROL BREAK STATEMENT PROCESS
Dear Guru's,
I have a requirement where i have to move the values to variable when control break (AT END OF) process. So i want to move the values according to the end of Vendor so for that i want to know is there any sy-index available which reflects changes when Control break (AT end of) process.
LIKE Sy-subrc = 0 when select statement fetches record or sy-tabix is like counter for loop.
Hope to get reply soon.
Regards,
Himanshu RangappaHi,
There is no system Fields for it.
But your requirement can be done with 'AT NEW' and 'AT END' statement.
Refer this sample example,
loop at otab.
at new module.
move otab-module to otab2-module.
ENDAT.
at END OF effort.
sum. "Do your calculations here
move otab-count to otab2-count.
append otab2.
endat.
endloop. -
Invoices are not getting displayed in the process receivables for a cust.
Dear All.
Collection Management
I have a situation here in prod environment the worklist is displaying the customer and his outstanding balances/all the data when we select that customer and go for process receivables then i cant find any invoices/documents under the invoices tab.
But we have the open invoices in AR for that particular customer, I am wondering how the invoices will get deleted
Can some one help me in this issue..
Thank you,
D vasanthHi ,
Based on the requirement , check whether the customer contact has been done carried out for the invoice , then possibility it must have gone out of the worklist , chekc whether the Invoice posted in the AR has been transferred to FSCM collection . -
Lexicographic image processing
I want to process the array of an image lexicographically (meaning reading as you write, so from left to right). Normal arithmatic functions (division, multiplication etcetera) multiply the entire array, but I want to push the top-left pixel through my algorithm, and then the one to the right of that, and after that one the one to the right of that, up until the last pixel, and then it starts with the pixel one row beneath the first one all the way on the left.
To illustrate, imagine an image of 12 X 16 pixels:
I want to calculate what value each pixel is supposed to have. I do this by comparing the actual value with the value I want. I calculate the value it needs to be at a certain pixel by looking at how far it is from the origin. The origin is in the center:
The distance then from the origin to the actual pixel is this:
The length of this 'vector' is then calculated by splitting it into a horizontal and vertical part:
The length is then the the x-coordinate squared and the y-coordinate squared added together and then the root of that number is taken. So that's basically the theorem of Pythagoras. I know that in this case, the length found is not the real length, because you use x=1 and y=1. So first off I subtract 8.5 from the x value and 6.5 from the y-value before going any further.
But I want to process the pixels in the order of y=1 x = 1, 2, 3, 4, 5, 6, 7, 8 etcetera and then y=2 x=1, 2, 3, 4, 5, 6, 7 etcetera. That is exactly what lexicographical processing is. But how can I get this to work? In my VI you can see how I am currently exporting just the numbers of the total size of the image (or frame of a video), but I want to process them one by one. I looked up some helpful Labview files that do something similar, like the 'Check Pixel Value' VI but there you have to manually scroll through the data. I want it to happen automatically.
So how can I process pixels of an image lexicographically?
Solved!
Go to Solution.
Attachments:
USB Webcam n-bit to corrected 1 bit.vi 59 KB
Check Pixel Value-2013.vi 31 KBYes, I do have a 2D array. I use the IMAQ Vision VI's to get my webcam to run. The solution is rather simple in that sense, yes.
But here is the deal though: the comparing with the Lorentzian function returns me a value. That is rounded to either a 0 or a 1, because it will be the pattern used for a Digital Micromirror Device (DMD). This induces an error. In order to make up for that, I need to correct it using neighbouring pictures (if a pixel is surrounded by 8 pixels, then the diagonal pixels are primarily used for this). I tried something similar in which I split it into 'rows' and process that, but that ofcourse removes the option to resolve the induced error.
The 'easiest' way is to split it into 1024 times 728 pixels and hook all of these up to the formula and connect each of them to their corresponding pixels, but that would take several months, so that's not an option.
Could you be more concrete in how you would do this? I tried something similar but thought, because of that error resolving, it would remove the option to work in this way, because it doesn't allow 'inter-row interaction'.
To give you some background:
I want to use a DMD to create a laser with a top-hat wavefront, meaning it's intensity distribution is equal everywhere on every point of the wavefront. For this we hook a CCD camera up to our computer which measures the intensity distribution. This image is then sent to our Labview program, which processes this image and turns it into a pattern for the DMD. The DMD or Digital Micromirror Device is a device that is made up of thousands of tiny mirrors, all of which can stand in either + 12 degrees or -12 degrees.
We look at the profile and compare that to a profile as simulted by a Super Lorentzian function
A Super Lorentzian function looks like this:
A / (B + ( (X-C)/X0) ^n)) + D
A/B is the top value
C is the horizontal transliteration
X0 is a value referring to the width of the function
n is a power
D is vertical transliteration
For even numbers of n the function produces a top hat function. In our case, we want to simulate an eigth order Super Lorentzian, so n=8
The image of the CCD Camera is a 12 bit image. Labview saves this as 16 bit, meaning it has 2^16 different grayscale values.
I don't have the CCD camera yet so for now I use the webcam of my laptop and turn that into a 16-bit image.
Here a some screenshots of my program so far:
And a SL function looks like this:
Our error inducement comes from an algorith developed by Dorrer and Zuegel, two german physicists.
A screenshot of their paper concerning binary spatial light modulation:
But the main issue I am concerned with is thus the error inducing. Doesn't normal array processing remove the possibility to do so? And if not, how can I do it? -
Process Chain - Delete File from Application Server
Hi Gurus,
Im working with Process chain, and i have a load from a flat file, so my question is :
How can i delete that file from the application server after was loaded ?
THANKS IN ADVANCED !!! I REALLY APRECCIATE YOUR HELP.
Marcoshi,
I have gone through the forum you have posted for deleting files from application server through process chain.
I have similar reuirement in my project.
Can you please provide me the solution?
Your inputs will be highly appreciated.
Thanks in advance.
Regards,
Lavanya. -
Problem with item and/or data during page-processing-PS/SQL
Greetings!
On my page I have a custom report (from 2 tables) and a small form-field, that adds and edits data in the report. After generating the form with the wizard I added an extra item, to store the id from one of the tables from the report data.
Now, on submit a calculation should take place, that updates data according user input with a procedure in Page-Prosseses:
declare a number;
begin
case :PLATZ
when 1 then a:=100;
when 2 then a:= 50;
else a:=25;
end case;
update TBL_MITGLIEDER set TURNIERPUNKTE = TURNIERPUNKTE + a
where ID_MITGL = :P14_ID_MITGL;
end;
:PLATZ is user selected (1,2,3), :P14_ID_MITGL stores the reference to TBL_MITGLIEDER (and shows the change, when I select another record)
As I understand, that process should also run, when I submit a chance, but nothing happens then.
But when I try to save a new record (which worked without any problems before adding that process), I get this error message:
ORA-06550: line 1, column 64: PL/SQL: ORA-00957: duplicate column name ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
Error Unable to process row of table TBL_TURNIERSIEGER.
Then, when I go back into the app-builder and try to run the page again, I get this message:
ORA-01403: no data found
Error Unable to fetch row.
I am not sure, if you guys have all the information you need, to know whats going on. Maybe this has to do with session-id and the whay, items are updated. I hope you can help me.
Thanks, best regards,
tobiFirst can you please post all log file errors
>> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
2. You can try reinstall from start (In this case you have to make sure that you un-install all)
[Personal Site] [Blog] [Facebook] -
Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1) Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2) Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3) Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selectedYou need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.
-
Report for open process orders
Dear SAP experts,
As the period of the process order from open to close is not short, will take 1 or 2 months in our business case, so we want to find a report which can get the information just like the output of KSPP(for planned orders) .
I tried to analysis the logic of program KSPP, and it seems the function modules based on the planned orders only.
Is there any way to get the similar report for open process orders?
Many Thanks,
Lisa YaoIs there any clues?
Maybe you are looking for
-
That's great I can see my iCloud calendar in Outlook, but I can't see my Outlook calendar in iCloud. Any ideas on this one? I don't want to copy the calendar into iCloud, because they wouldn't be in sync. How do I view my Outlook calendar in iCloud s
-
As the subject says... the old CD wants to launch itself in the Classic environment but I don't have one of those. I'd liek to pull out some of the source video files - or salvage anything from it (sentimental value only), if anyone knows of a progr
-
GOOD AFTERNON PEOPLE OF APPLE SUPPORT COMMUNITIES. LAST THURSDAY I UPDATED MY iPAD 2 WITH iOS7 SOFTWARE SYSTEM EVERYTHING WENT OK. BUT I TURNED ON THE iPAD 2 A FEW AHOURS LATER AND THE PASSCODE A GAVE IT IS NOT WORKING. MY iPAD 2 IS DISABLE NOW. AND
-
SQL Server 2012 SP2 NTService Accounts Access Denied starting services
We have an SQL Server 2012 SP1 which was running perfectly until we applied the SQL Server 2012 SP2. After SP2 was installed and the server rebooted all the associated SQL services that uses NTService\xxxxxxx accounts failed to start with Error 5: Ac
-
[svn:fx-trunk] 15314: Merging revision 15312 from 4.x to trunk
Revision: 15314 Revision: 15314 Author: [email protected] Date: 2010-04-09 14:02:53 -0700 (Fri, 09 Apr 2010) Log Message: Merging revision 15312 from 4.x to trunk ComboBox bug fix http://bugs.adobe.com/jira/browse/SDK-26089 - s:ComboBox is not