Process IDOC stuck up in TRFC
Hi,
I have an IDOC that is still being stuck in TRFC Queue. The status shows as '03', but I can see that IDOC in the TRFC queue. It is lying there for a month. I need to process that IDOC manually so that it goes to the other system. Which transaction can be used for that.
I tried with BD87 --- But here u have lot of other IDOCs also in TRFC and I cannot pick up only that one single IDOC from TRFC queue.
Please let me know the entire process.
Regards,
Anirban
Hi Anirban,
Please go to transaction <b>SM58</b> and check if the IDocs are stucked up on the t-rfc queue. If so, you can right click and choose Execute LUW to release them.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.
Similar Messages
-
Idocs stuck in tRFC queue - why?
We had an issue where 2 Idocs looked like they where sent from our
logistics box to our HR box, but in reality, they were stuck in the tRFC
queue in our logistics box.
The idocs were created 2 days ago and were never processed. When I found
them in SM58, I executed them and they were sent and processed
successfully.
Why would those idocs get stuck in the tRFC queue? Shouldn't the queue
auto-process those idocs?
thanks,
robert.Hi..
Normally this will happen when you Set the "Collect IDOCs" Option in the Partner profile Outbound Message type.
In that case these IDOCs will be dispatched only when the RSEOUT00 program runs in Batch or Explicitly.
If you set "Transfer Immediately" option in Partner profiles then they will be dispatched Immediately.
reward if Helpful. -
Idocs stuck in workflow at status 51
Hi all,
There are lot of Idocs stuck in status 51 in workflow. Work flow error message reads as "Document OvershipCl does not exist". Can someone explain what does this mean and how do we clear these items.
Regards,
SantoshHi Santosh
You could also use transaction BD87 for further analysis and processing. This is more interactive. Please select the IDOC and on the left screen the the status record with entry 51 will have the details as to why the IDOC failed. Please correct as required in order that the IDOC will get processed.
Hope it helps. Please do assign points if found useful.
Regards,
Karthik -
Hello,
IDOC stuck in sm58 with error No authorization to send IDocs with message type
scenerio is FTP to IDOC. We are using Pi7.1 its simple secenerio can u pls let me know what is case how can we solve this.Hi Michal
do you not use the "Permitted Agent" then? or does that not have any affect at all???
Specifies the job (person or group of people) to be notified if processing errors occur on the IDoc interface. You can define up to three different jobs:
in the inbound or outbound partner profiles for special partners, messages and direction.
in the general partner profiles for special partners.
in the general IDoc Administration settings. -
Select one of the installed languages- Idoc stuck in sm58
Hi,
We have observed a strange issue during testing.
Some interface Idocs going from R/3 system to XI got stuck in sm58 with error
Select one of the installed languages
Later it was found that language EN was not specified in RFC destination and in the user profile which was being used in this RFC.
It was fixed and interface was working fine.
What I was not able to understand was why other interfaces were processing Idocs successfully using the same RFC destination?
regards,
AnirudhHello,
Are your other interfaces still using the same RFC destination and port to PI , or do you have differnt? if different that could explain your issue..... -
In 'mail', after importing mailboxes the process gets stuck on '1619 of 72826' and 'time remaining' climbs infinitely. Please suggest a solution.
I converted my mail boxes from POP to imap for the purpose of syncing all my devices. I backed up my mail boxes and further more perfomed a timemachine backup.
Upon restoring ther mailboxes, either by manually copying them to the mailboxes folder, and restoring a timemachine backup, both pocesses result in the above problem.
Please recomend a solution.
file://localhost/Users/redwood/Desktop/Screen%20Shot%202013-10-15%20at%201.48.10 %20PM.png
file://localhost/Users/redwood/Desktop/Screen%20Shot%202013-10-15%20at%201.38.30 %20PM.pngCan anyone out there please help!
-
How to process Idoc status file within Sap?
Hi All,
We would like to process received status file to update the sent IDOC's. Our current setup is that we send/push the Outbound Idoc to external EDI sub system and pull the status file for processed Idoc from external EDI system to our R/3 server.
Sap Documentation explains the scenario, where this process is triggered from external system using startrfc program, whereas our scenario is to trigger the status update process, once the file is pulled to our system from unix using edi_status_incoming function module.
Your anwers are much appreciated.
Kind Regards,
SandhyaHi Sandhya,
Once the Idocs are sent to the EDI Subsystem, the SAP will have the status that the Idoc has reached the partner sub system. I hope, the workflow should be able to trigger back the status file to the SAP System after the Idoc is processed at the EDI Subsystem.
Please check with the workflow that is attached.
Else, if this is using the FM or Message Control, then check the configuration under MN04.
I'm also trying to find the solution for the same.
Regards,
-Syed. -
hi,
i want to process idoc in background means i don't want to use BD20 to process idoc having 51 status.at this time i first use t-code BD20 to process idoc and then i get the data . now i want that whenever idoc comes in folder they automatically processed in background without needing someone.
thanx/regards,
vaneet thakurHi,
check this link.
Link:[http://help.sap.com/saphelp_sm32/helpdata/en/5f/45f93b4139b478e10000000a11402f/content.htm]
hope it'll give some idea.
Regards,
Sneha. -
What is the Successfull processed IDOC status number?
Hi Experts
What is the Successfull processed IDOC status number?
arjent Please.
Thanks in advance
SekharHi Chandra,
Below are IDoc Process Codes
For outboud Idocs:
1 IDoc created
2 Error passing data to port
3 Data passed to port OK
4 Error within control information of EDI subsystem
5 Error during translation
6 Translation OK
7 Error during syntax check
8 Syntax check OK
9 Error during interchange handling
10 Interchange handling OK
11 Error during dispatch
12 Dispatch OK
13 Retransmission OK
14 Interchange Acknowledgement positive
15 Interchange Acknowledgement negative
16 Functional Acknowledgement positive
17 Functional Acknowledgement negative
18 Triggering EDI subsystem OK
19 Data transfer for test OK
20 Error triggering EDI subsystem
21 Error passing data for test
22 Dispatch OK, acknowledgement still due
23 Error during retransmission
24 Control information of EDI subsystem OK
25 Processing despite syntax error (outbound)
26 Error during syntax check of IDoc (outbound)
27 Error in dispatch level (ALE service)
28 Not used
29 Error in ALE service
30 IDoc ready for dispatch (ALE service)
31 Error - no further processing
32 IDoc was edited
33 Original of an IDoc which was edited
34 Error in control record of IDoc
35 IDoc reloaded from archive
36 Electronic signature not performed (timeout)
37 IDoc added incorrectly
38 IDoc archived
39 IDoc is in the receiving system (ALE service)
40 Application document not created in receiving system
41 Application document created in receiving system
42 IDoc was created by test transaction
50 IDoc added
For Inound Idocs
51 Error: Application document not posted
52 Application document not fully posted
53 Application document posted
54 Error during formal application check
55 Formal application check OK
56 IDoc with errors added
57 Test IDoc: Error during application check
58 IDoc-Copy from an R/2 connection
59 Not used
60 Error during syntax check of IDoc (inbound)
61 Processing despite syntax error (inbound)
62 IDoc passed to application
63 Error passing IDoc to application
64 IDoc ready to be transferred to application
65 Error in ALE service
66 IDoc is waiting for predecessor IDoc (serialization)
67 Not used
68 Error - no further processing
69 IDoc was edited
70 Original of an IDoc which was edited
71 IDoc reloaded from archive
72 Not used, only R/2
73 IDoc archived
74 IDoc was created by test transaction
Regards,
Satish -
In 4.6C, How to delete IDoc stuck?
Hi, experts
after I load more than 20000000 records data from R/3 side, I found out there are too many IDoc stuck in R/3 side use SM58.
How can I delete these IDoc in one time? the T-CODE 'WE11' and the program 'RSETESTD' can not use in my 4.6C system.RSETESTD.try BD87
-
Hi ,
While processing Idocs we are facing with 2 error can any one help me out.
1.Order 123 does not exist
2.Error in document: BKPFF $ DR0CLNT400
Message no. RW609
Diagnosis
Errors occurred when checking or posting the document
Reference type = BKPFF
Reference key = $
Logical system = DR0CLNT400
You can find the errors in the log
Thanks and Regards
SriHI,
Please go to transaction WE02 and look at the IDOC.
The IDOC will have a STATUS section. when you expand it, it will give you a log with error status. Double click to look at the detailed error.
Looking at the error it looks like you are bringing in an IDOC from another SAP system to this SAP system. The order # 123 against which IDOC is for, doesn't seem to exist in the receiving SAP system.
Regards -
Hi,
What is the best possible way to process an IDoc (Message type: ORDERS/ORDCHG) in background in an Interactive report.
Thanks in advance.
Rgds,
AKHi AK
Here's the procedure to post IDocs in ALE inbound processing in background.
Inbound IDocs and IDoc packets are first saved in the database. IDoc packets are split into single IDocs beforehand.
The program RBDAPP01 later releases the saved IDocs for processing. Single IDocs can be put into packets and then processed.
Perform the following steps:
1. Set-up background processing (IDoc/ALE area menu):
IDoc Interface/ALE --> Administration --> Runtime Settings --> Partner Profiles (WE20)
Then the required setting is: In the detail screen Inbound Parameters select the option Trigger by background program.
2. Schedule posting (ALE customizing):
Transaction SALE --> Set-Up System Monitoring --> Posting IDocs in Recipient System --> Schedule
You can also process the IDocs manually by passing them to the posting function module. In ALE Administration choose Monitoring --> Status Monitor (BD87), select the IDocs and then select Process.
You should choose background processing, especially if large data volumes are to be distributed. System performance is better.
Packet Processing can be used to process individual inbound IDocs in the background.
Dont forget to reward, if it helps ;>)
Regards,
Rakesh.
Message was edited by: Rakesh -
Hello, I used to purchase games of big fish games. Since February I can't purchase in apps. After purchasing I receive a mail that I've been charged, but the game is not downloaded. The process is stuck and Each time I get another comment, "authenticating", "purchase is being processed right now" etc. I tried to delete apps and download again, restart the ipad, enable and disable restrictions and nothing helps. I always get a refund but the problem remains the same. Did anyone meet the same problem?
Look, I understand I still need a card attached to the account. The problem is, it won't accept my card because I only have 87 cents in my bank account right now.
If I had known there would be so much trouble with the iTunes card, I would have just put the cash in my bank account in the morning instead of buying an iTunes card (I didn't expect the banks to be open on Thanksgiving of course).
Apple will only accept cards that have a balance. The balance is so small in my account that it won't accept it as a valid card.
I'm going to have to contact Apple anyway to reset the security questions. That's obvious. Your answers were not exactly helpful. You didn't tell me anything I don't already know, but thanks for trying to be helpful. -
Hi,
I have a problem when I process IDocs in CRM 5.0 system. The IDocs of BP are sent via middleware into my system. When I use BD87 to select some IDocs, it often to be timeout. And if I use report RBDAPP01 to process IDocs as a background job, it often took long time and not finished.
I have looked at process via SM51, and found the progress seems to stay at program "SAPLBUBA_4" or "SAPLBUD_MEM".
Do anyone know the cause of this problem? And how to solve it?
Thank you very much for your help!
Best regards,
LongHi,
Instaed of sending bulk of idocs ,break them and schedule the program RBDAPP01..say there are 2000 idocs to be processed..
For exmaple create a variant of say 1 to 1000 and then schedule the program RBDAPP01 and once again crerate another variant with 1001 TO 2000 and then once again schedule RBDAPP01..Now in this case 2 jobs will shedule with 1000 idocs...
Regards,
Nagaraj -
Did you meet error AM840 when processing IDocs of BP?
Hi,
When I process IDocs of BP, there is a popup which said "Database error deleting from table ADRCOMC MessageNo:AM840". I have searched Notes, but no useful information founded.
Do you know the cause of that error? How to solve it?
Thanks!
Best regards,
Longhi,
do you delete any address data for your business partner ?
try to check address adata from you IDOC
to see if it's correct
you can send an IDOC from your BP and check
if you populate the address data in the same way
Regards,
michal
Maybe you are looking for
-
I upgraded my Sony Vaio Gate software to 2.4.0.06210 on Wednesday night. Afterwards, my mail functionality is not working with Firefox. It will work with Internet Explorer, but not with Firefox when I try to do the following such as clicking on check
-
Attachments in a group email sent from outlook 2007 do not show in the message
iPad doesn't show attachments in a group email sent from a Windows 7 PC using outlook 2007. Doesn't matter what the attachment is, if it is sent to a group created in Outlook the attachments do not come through. Is this a bug in iOS? My Google Nexus
-
"Backend systems with Release 701 are not supported " - ECC 6.0 to SRM 5.0
Hi , I have 2 doubts . 1. We are getting Error "Backend systems with Release 701 are not supported " while replicating vendors from ECC 6.0 backend system to SRM 5.0 system. There are some notes on simillar topic but are not for SRM 5.0 ,suggested
-
There is an ad at the bottom of my home page that is very annoying. I have tried everything to delete it but it won't go away. I can only assume that it is one of your sponsors. The ad keeps saying I am a winner and just answer a question. I am very
-
ASP recordset quotation mark trouble
Hello everyone, I've got a recordset that pulls sales data based on a specific product that is selected by the client from a dynamic dropdown of all the products in the database. The trouble: If the product name has quotation marks in it, no results