Process in Process chain that shows yellow inspite of being green

Hi,
I have a process chain where one of the processes shows yellow when I look at it in RSMON log view. In the process monitor however it has status 'green'. also the chain is set up in such a manner that the next process does not start unless this current process has a status of red or green. But the next process started and has green status in both RSMON and process monitor. When i click on the context menu for the process that shows Yellow, I get an extra option of 'End process again'. Could anybody please tell me what this option does and why the process which is completed still showing yellow.
Thanks.
Jaya

Hi Stefan,
Check if there are any other infopackage/DTp loads for this DSO/ info cube was running at the same time or may be a bit earlier due to which load into the Data target was not being successful and remained in YELLOW status forever.
try using the FM RSPC_PROCESS_FINISH to manually change the status of the PC to green.
Regards
KP

Similar Messages

Providing external url for the fqdn for webfeed returns error in eventlog that shows internal url is being used - how to change to the external url?

I've got my Rdweb accessible on both my internal and external network by using split dns locally to resolve the external url (remote.domain.com/rdweb) to resolve and everything works fine. However users don't want to use the rdweb interface (as it is slower
than just clicking on a rdp shortcut.
Following the notes at http://social.technet.microsoft.com/wiki/contents/articles/14488.distribution-of-remote-apps-and-desktops-in-windows-server-2012.aspx - I've tried to set up the webfeed on a Win7+ machine but when I enter the external url that
is protected by an SSL cert the eventlog shows that the internal address is being used and it doesn't match the certificate. - "There is a problem with this connection's security certificate.
The remote computer cannot be authenticated due to problems with its security certificate.
Security certificate problems might indicate an attempt to fool you or intercept data you send to the remote computer.
Windows cannot continue setting up this connection. Contact your workplace administrator for assistance.
Connection name:
Connection URL: https://internalservername/rdweb/feed/webfeed.aspx
How do I set the servers to use the external address rather than the internal one - i'm assuming it's similar to exchange's
Set-webservicesvirtualdirectory command but I can't find the equivalent command documented anywhere.
http://absoblogginlutely.net

Hi,
Thank you for posting in Windows Server Forum.
Please check below mention point.
• Create a relevant DNS entry in the mentioned zone to point to the RDS environment’s internal IP address
• Create a relevant DNS entry in external DNS to point to the firewall which is publishing RDS’s external IP address
• You can use the below mention script to change the FQDN of the RDP files provided by RD Web Access / RemoteApp and Desktop connection feed.
Change published FQDN for Server 2012 or 2012 R2 RDS Deployment
http://gallery.technet.microsoft.com/Change-published-FQDN-for-2a029b80
In addition please check below mention thread.
How do I change the URL to the Remote Web Access server in Windows Server 2012?
http://social.technet.microsoft.com/Forums/windowsserver/en-US/67dfab70-7e10-4e0b-a3c8-63ce776f2355/how-do-i-change-the-url-to-the-remote-web-access-server-in-windows-server-2012?forum=winserverTS
Apart from this, also check the settings under; IIS in RDWeb Server as per below mention path.
Expand the default Website >Pages >Application Settings >DefaultTSGateway >
Enter the external address (FQDN) of the RD Gateway in the Value Field.
Hope it helps!
Thanks,
Dharmesh

DSLR workflow showing yellow line and being very slow

I am editing DSLR footage in Adobe Premier Pro CS5.5. The sequence has a yellow line and the workflow is very slow. Is there a way to solve the issue?

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Also read http://blogs.adobe.com/premiereprotraining/2011/02/cuda-mercury-playback-engine-and-adobe- premiere-pro.html

Process chain remains in yellow for long hours

Hi friends,
My process chain remains in yellow state for many hours.
when i check the the message , it shows as chain has been removed from scheduling. Is that a problem or what may be the problem?
generally if a problem of PC remaining in yellow for long time , what are the Tcodes to be looked into.
regards,
Rajesh

Hi Rajesh
GO to RSPCM check the sataus still its in yellow or green.If it is in yellow then
double clicjk on this it will takes to you in to the chain individually .Then check the
process ..
Or go to RSPC check wher exactly the chain is kicking.Then check the monitor
status of that particular process .This monitor u can achieve By double clicking on
the process-->it will show u a popup in that click on monitor.and then depends on t
the issue u can work and repeat .
Regards
R M K
***Assigning points is the only way of saying thanx in SDN ****

Process chain hangs on Yellow , no process no data load, nothing happens...

Hi friends ,
I have a problem on one of our Meta chain . We have a meta chain , and it have some sub chains . It is a daily scheduled meta chain.
One day some thing happened and one of the sub chain begun to hang on . One of the sub chain of meta Chain I see Yellow light, which means on process . But while I enter into this sub chain I see nothing processed . Meta chain finish previous chain but besides nothing .
I tried to remove this sub chain from schedule , I tried to reactivate , and to schedule again , but all of my attems didn't solve anything . All of them get an short dump because of maximum time
I need your helps .
Thanks

hi dear,
I guess u already got so many solutions and none of them working try these out.....
1.Try activating the chain ...is there some issue in that??
2.Now go to the top...menu..execution tab...remove from schedule...Now schedule again...
3.If you want to run the chain immediately...after doing remove from schedule go to the start variant and change the option as start immediately.
Since the chain is not triggering ,moving forward after start variant then may be the load on the system is too much or else the chain has activation issues...
Regards,
rocks

SQL that shows which client process is connected to which server process

Hi,
I am running database on Linux.
I have many oraclePROD processes (up to 100). These are dedicated server processes, which are opened by several client processes.
I want to know which server process is connected to which client process. I see that v$session gives the session# and client process, but does not give information about the related dedicated server process.
Is there any v$ view that gives this information?
Thank you.

user12952237 wrote:
Hi,
I am running database on Linux.
I have many oraclePROD processes (up to 100). These are dedicated server processes, which are opened by several client processes.
I want to know which server process is connected to which client process. I see that v$session gives the session# and client process, but does not give information about the related dedicated server process.
Is there any v$ view that gives this information?
Thank you.
1* select process from sys.v_$session where username = 'USER1'
SQL> /
PROCESS
29711
SQL> !ps -ef | grep sqlplus
bcm      29711 1980 0 08:04 pts/0    00:00:00 sqlplus
bcm      29761 29711 0 08:07 pts/0    00:00:00 /bin/bash -c ps -ef | grep sqlplus
bcm      29763 29761 0 08:07 pts/0    00:00:00 grep sqlplus
SQL>

TS1363 while updating my IOS to IOS 6 the updating process couldn't be completed for unknown reason and my iphone has nothing but a black screen with an apple and a meter that shows no progess. it completely froze!

When updating my IOS 5.1.1 to IOS 6 and after the download completed the updating of the iphone couldn't be completed for unknown error and the device froze and all i have now is a black screen with an apple and a meter that shows no progress I can't switch off my iphone or do anything!!!

Hi,
I had a similar problem last week with my nice shiny 3 week old iPhone 6. I noticed the Apple logo was on the screen, but it did not progress like a normal boot up. I restarted the phone, and it showed the Apple logo, then a red screen then cycled back to the logo and kept looping. I got the phone to the iTunes connection stage by keeping hold of the power button and the home button until the apple logo appeared then kept holding the home button. iTunes recognised the phone, and wanted to restore, but this was unsuccessful because the phone would keep looping to the red screen and iTunes failed. After loads of Apple support, I was told it was a hardware failure, and like you I live more than an hour away from the store. None the less, I made an appointment with the Genius bods, and they replaced the phone. They said they had never heard of the problem, but really, take a look at these forums and you will see that it is a common problem and I suspect they are keeping it under wraps...
My issue is that as a disappointed customer with faulty goods, why should i have to stick to an appointment to get it replaced? What other store would you have to do this?
The "Genius" didn't even want to see the phone powered up before offering a replacement... Oh, and it turned out they didn't have the exact same model as a replacement so they were going to send me out of the store empty handed.... I kicked off BIG time, and they very reluctantly gave me a phone from the sales stock, rather than the repairs stock..
Not a happy Apple customer anymore, and I feel the more people who know about the lack of service and customer care the better. They need to get off there high horse and join the real world!

Parallel process in process chains

Hi All,
I have created a process chain with two parallel jobs (for forecast run) in APO DP. whenever i'm checking it, it is showing me that "Too many parallel processes for chosen server"
In the diagnosis, the message is "On the server you have chosen, there are only 1 batch processes available. The process chain has been designed in such as way that 2 processes must be processed parallel".
Do I need to maintain any settings.Please let me know.
Thank you.
Regards,
Raj

Hi Raj,
What it is complaining about is that the number of batch processes(background processes) available on the system are only 1 and you have given it 2 background processes..now if the system only has 1 bckgnd process,, how will it run 2 processes ) ??
You can check the number of background processes in SM50 and then modify the number of background processes in RZ10(start up profile)......Ask your basis guy to increase/check that???
Thanks
Abhi

Is there an add-on that shows if any of google results is already in my firefox bookmarks? i.e with a yellow star next to "+1" or preview button.

Is there an add-on that shows if any of google results is already in my firefox bookmarks? i.e with a yellow star next to "+1" or preview button.

A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode

My itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?

my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
Diagnostics test
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
ECS G31T-M7
iTunes 10.5.2.11
QuickTime 7.6.9
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ABAC07F3CCB0
Current user is an administrator.
The current local date and time is 2011-12-31 14:06:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
Description:            Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
IP Address:             192.168.1.5
Subnet Mask:          255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:      Yes
DHCP Server:         192.168.1.1
Lease Obtained:     Sat Dec 31 13:46:09 2011
Lease Expires:       Tue Jan 03 13:46:09 2012
DNS Servers:         192.168.1.1
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
SSL 3.0 Support:     Enabled
TLS 1.0 Support:     Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-12-31 14:00:02.
**** Device Connectivity Tests ****
iPodService 10.5.2.11 is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
rawkiss’s iPhone, iPhone 3G running firmware version 4.0
Serial Number:       86931UEAY7H
**** Device Sync Tests ****
Sync tests completed successfully.

I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
Here is a link that will take you directly to the Tech Note:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
When using this fix the Tech Note indicates:
"Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
however it did retain the captions (at least it did for me).

Back ground processes, dialogue processes and Process chains

Hai all,
I am going through making process chains and I am struck with one thing:
"How many background process chains and dialogue processes you have during run time"
This is the problem. I understood everything else except this.The concept says that I have to know what is the capacity of the system, how many background and dialogue processes it could accomodate, how many are left and how many you can use for your process chain.How do we find out this? and could somebody please explain me or refer to documentation about the Back ground processes, dialogue processes and Process chains.
Thanks.

Hi Visu,
You can see the number of dialog and background processes by using transaction SM51 and then double clicking on the server (we only have one but it may be different for each). Our BASIS folks take care of the number of processes as well. And, for us we have a schedule that changes the number at a certain time of day because you tend to need more dialog during the day but more batch at night.
The transaction to look at and change the settings is RZ03. Then use the menu path Edit->Operation Modes you can select either Configuration or Timetable here. Both give information in different ways. I tend to double click around to see what it might tell me.
I hope this helps a bit,
Diane

Add at least one process to the chain before saving !!!

Hello SDN s,
How ya all ?
I am building a Process Chain which loads around 35 Transactional Data InfoPackages. For this the requirement is to Delete Indexes collectively before the 35 data loads and after the data loads the Indexes has to be Generated.
Here i D&D the Data Target Administration -> Delete Index with that Create Index (Generated from DROPINDEX) came automatically. I removed the link between these 2, and tried to keep the 1 st InfoPackage with Execute InfoPackage, it gave me the message
Display More Chains:
Process Z_DELODS (type DROPCUBE) has already been used in other chains
Do you want these chains to be displayed in the maintenance screen too
Yes / No / Cancel
Then i tried to save or activate the PC it throws this message "Add at least one process to the chain before saving"
What could be the problem here ?
Best Regards....
Sankar Kumar
+91 98403 47141

Hi,
Please select No when it displays the message
Display More Chains:
Process Z_DELODS (type DROPCUBE) has already been used in other chains
Do you want these chains to be displayed in the maintenance screen too
Yes / No / Cancel
Include atleast one process after the start process before saving..
Hope this helps you...

Set delay for process in process chain (BI7)

Hi gurus.
Can anybody advice me on how to set delay for a process in process chain in BI7
Thanks in advance

Hi,
If you right-click on a process in the Process Chain, there should be an option called Debug Loop. Here you can enter the number of seconds to delay a process.
The only difference between 3.5 and 7.0 is that Option Waiting Time in context menu of "any" process is replaced by Debug Loop.Here you can enter the # of seconds for which you want your process to be delayed.
See below:
Re: Start a Process Chain after every 15 mins
Hope this helps.
Regards
CSM Reddy

Abap process setup in chains

Hello,
I see that to use an abap process in a chain, I can either:
1. call a program with / without a variant
2. call a event triggered abap program.
What I need to clarify is setup method 2.
Is it true that whatever event I set here will trigger whatever program I entered here?
Is this the equivalent of sm37 job that is setup to run only if event is triggered?
Can a program be set to trigger by an event from se38?
I am just unclear about setting up a abap as a process in a chain.
Hope you could advise.
Pascal Gabin

Pascal
Check this link if you have not seen already. You could include your program in a Variant and when ever you ttigger that event Process chain will start.
Thnaks
Sat
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7

How can we stop the Collapse process in process chain.

hi
guys
How can we stop the Collapse process in process chain.if any one know's plz tell me
your regards
suresh

Hi,
All the above post duly suggest a the methods we usually follow to cancel a collapse request i.e sm37 ---> Cancel without core,but these solution only applies if we are running collapse as a seperate variant in the process chain, in case its running as a part of change run the all above process will lead to the locking of the target.
In that case if you could "lock the target" even before the collapse ran will result in the "Stopping of the collapse on the target automatically" .
As far as figuring out the exat job of the collapse, you can directly get the job details in the "display message' , context menu option of the "Collapse variant" in the chain, clicking on the batch monitor and then clicking on the job to get its detail,then going to the specific "Application server " via SM51 and cacelling the job.
Do check wearther the target is unlocked or not in sm12 if not then choose the object in se03 and select "Unlock".
Hope it will serve yoour purpose
Thax & Regards
Vaibhave Sharma

Process in Process chain that shows yellow inspite of being green

Similar Messages

Maybe you are looking for