Process instruction characteristics and process messages

Hi,
Can anyone tell me why process instruction characteristics is required when only process message characteristics are displayed in PI sheets (input or output).
Regards
Joe

Hi,
Answer is already there in your question.
and that is
(input or output)
Now you creates the one Process Message characteristic let's it is Temperature.But how it's value comes in the PI Sheet (As Ouput or Input manually by user) that is decided by that Process Instruction Characteristic.
Now when you creates the Process Instruction Category (O12C) except type 0 you have choice of creates it by using help of Process Assistant.This Assistant assigns the Process Instruction Characteristic to the process Massage Characteristic automatically when you select the specific radio button or Activate the check box during that PI category creation.
For Example when you creates the PI category Type 2 using Assistant.Here after naming first screen comes to you is to define type of Process data Request.Here when you select the radio Button for Simple process data request then indirectly you assign the process Instruction characteristic PPPI_DATA_REQUEST_TYPE and its Value comes as Simple.
But when you create the PI category type 0 you have to assign this PI Characteristic manually because its Universal Category and there is no assistant which helps you.
Regards,
Dhaval

Similar Messages

Transaction code to find Process message and Process Instruction

Hi
I am new to PP module
Where do i find (In which Transaction) the list of
a) Process Message Category
b) Process message
c) Process Instruction Category
in SAP ERP system??
Regards
Sweety

Hi
Thank u all for responding
Still I was not able to find certain Process Messages like YQ_AIR, YQ_RPM, YQ_TEMP, YQ_CONS, YQ_PHCO, YQ_PHCO2.
and Process Instructions like
YQ_AIR, YQ_ENDPI,YQ_HEAD, YQ_INSTR, YQ_LAY, YQ_MATLI, YQ_PROD, YQ_PTEXT,YQ_RPM, YQ_TEMP, YQ_CON1, YQ_CON2..
do I need to do some (Basis) configuration to get these?? or the above mentioned Process Messages and Process Instructions are not pre defined??
Regards
Sweety

Process message characteristics

hi experts ,
in standard process messgae characteristics we can see process message icon in first tab where we can give input help or
foriegn key etc. for characteristics starting with pppi.
same process message icon i want in Z-characteristics created by me , but its not appearing .
even if i copy the standard and create a new i dont get it .
is this standard SAP behaviour . how can i get that process message icon in a new characteristics .
please advice.
reagrds
satish

Dear,
If we see the characteristics of process management through CT04 an icon 'Proc. mgmt' appears for standard characteristics. But this icon does not appear if we create a characteristic manually. This is standard SAP behavior
Just assign process message category in process instruction category in O12C that's all.
Regards,
R.Brahmankar.

Process Message and PI sheet

Dear All,
I have created one finished product and one raw material. In Master Recipe i created one Phase and assign two instruction category CONS_1 and PROD_1.
Now i generated PI sheet in COR2 and see CO53 that it is present and now i send it and in CO60 it is there.
Now when i see and enter quantity in PIsheet and double click on it to see the Process Message
1) PI_PROD has material number of finished product - It is ok
2) PI_CONS has also material number of finished product but it should have raw material number.
So, my issues are
1) How raw material will be there in PI_CONS Process Message.
2) Should i create two phase and assign it one by one or what else.
3) If i have Process Order of 500 quantity and through PI Sheet i do GR of 10 and GI of 10 then for next time how should i do GI and GR again. Should i send PI Sheet again from CO53 to CO60.
4) Is there only one control Recipe is generated for one process order.

Hi,
process instruction CONS_1 will not show raw material number it will show reservation number of the process order...instead of using CONS_1 use CONS_D and use this control recipe destination and make the settings as shown below...
your final PI sheet output will be like this....
Hope this helps...
Thanks
Kumar

Process instruction sheet and control recipe

dear,
can u let me know how the process instruction sheet is created or maintained and how the control recipe and destination works.
if I want to start with PI sheet and control recipe in my organisation , how do I go ahead with configuration as well as process.
thnx-rgds
Amitabh

Hi,
In control recipe destination the destination type must be browser based.Another is Abap based generally it is using.
So select that recipe destination, select phase & go in deatil u will find INSTR.READ1, READ2,SIGN which can used as a instruction.
There are two types 1:process sheet 2: remote fuction call (RFC)
Process sheet is used for giving instructions to line operator & also entering data during reaction etc per period.
For INSTR- select it give instruction for that particular phase.
READ1 - In which we are one column is available where we can enter 1 value by line opearator
READ2- Here 4 columns are available u can use it as date,time,temp,total etc. as per your requirement.
SIGN- Here u can use it as a to identify who entered the value.Systen will ask for pass word after entering ID
After creation & releasing process order create contriol recipe.
Thern go for T code- CO 53 - send control recipe(control recipe monitor)
http://help.sap.com/saphelp_46c/helpdata/en/f3/6ee4117aed11d2a5fe0060087d1a6b/content.htm
CO60 - Operator will enter the values
CO54 - send process messages
http://help.sap.com/saphelp_46c/helpdata/en/ac/6a101268ce11d2a67600104b57eaa3/content.htm
CO55- Check the report.
Check the above & reward if useful.
Regards,
Suhas

Difference betwn Process insturction and Process Message...

Dear all,
What is meant by Process Instruction category and Process Message category. what is the difference between this two and it is applicable in PI sheet.
What is control recipe destination.
pls explain this question clearly
regards,
s.sakthivel

Hi,
You can go through below links for better understanding...
http://help.sap.com/saphelp_45B/helpdata/en/d5/e264b20437d1118b3f0060b03ca329/frameset.htm
Process flow in Process industry
Process Instruction Category
Process Message Category
Regards
Edited by: Julfikar Ali on Aug 21, 2009 11:06 AM

Oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters

Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
        While testing the Webservice...
               I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
               1. I added the webservice SOAP and added the method.
               2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E

Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
        While testing the Webservice...
               I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
               1. I added the webservice SOAP and added the method.
               2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E

Exception processing message 0xc0000013 after updating itunes and Quicktime

After updating itunes and Quicktime, every time I remove a CD from my DVD drives I get an error saying no disk exception processing message 0xc0000013 Parameters 0x759f023c 0x87f51934 0x759f023c 0x759f023c.
I tried doing a restore to a time before that update and that didn't seem to help. It just gave me different parameters.
I'm using Windows Vista and this is driving me nuts.
Any help would be greatly appreciated.

I also have the same problems as you guys after installing Corel Painshop Pro X12. I went into the task list and stop the CorelIOMonitor process and then the problem went away. I found out that you can disable this from starting up using System Configuration tool via Start -> Run -> msconfig
. It's an interm solution untell they fix it. Maybe someone needs to notify Corel or Apple to fix this problem.

PP-PI - Process message processing and batch management in PI_CONS message

Hi All,
Hope you can help me to find the better solution... I will try to explain my scenario
Scenario: to control the production run PP-PI module is in use. Process order are created in SAP system and then transferred to the process control system where the execution of the process order is controlled On-line. Once per month the confirmations are transferred from this control system to SAP. In the Process control system batch are not managed. For good issue posting standard process message PI_CONS is used.
Now we have the situation that some raw materials used for process order processing are managed with batch. During the process order creation the batch related with this raw materials can be determined, only during the month when the raw material is entered in the plant is where the batch is determined. At the end of the month the batch of this materials is available in the SAP system (not in the process control system). Due to behavior of PI_CONS regarding batch if this characteristic is not informed in the process message or in the reservation an issue is trigger.My doubts are:
1.- If I need inform the batch during this confirmation ,an even split the quantities in the process message according the batch availability, I'm force to use a custom process message or there is other workaround? (remember is not feasible send the batch to the process control system)
2.- probably i miss something because I'm can't debug the execution of the process message. How can I debug the execution of a manually created process message?
Sorry for the long explanation I try to explain my scenario as better as possible.
Thanks in advance for your valuable inputs.

Thanks for your replay.
No really I don't like to make the batch mandatory, during the good issue is not feasible inform the batch due to it is not managed in the Process Control System. Due to the behavior of PI_CONS if for batch managed materials the batch is not informed in the message or in the reservation an error is trigger. In the reservation snot feasible inform the batch because in that moment is unknown.
My question is if it is feasible some how have like FIFO batch determination when the process message is processed without creating a custom message.
Thanks in advance

Process Message failed: System.ArgumentOutOfRangeException: Index and length must refer to a location within the string.

Hi
I am trying to process an X12 message and I am getting following error.
Method : ProcessMessage
Message : Process Message failed: System.ArgumentOutOfRangeException: Index and length must refer to a location within the string.
Parameter name: length
   at System.String.InternalSubStringWithChecks(Int32 startIndex, Int32 length, Boolean fAlwaysCopy)
   at Q.Inbound.X12Preprocessor.getTranTypeFromFuncCode()
   at Q.Inbound.X12Preprocessor.setProcessType()
   at Q.Inbound.X12Preprocessor.getFuncGroupHeader(StreamReader sr)
   at Q.Inbound.X12Preprocessor.ProcessMessage(X12Definition& docInfo)
Please help.
Thanks

Might try them over here.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=csharpgeneral%2Cvbgeneral%2Cvcgeneral&filter=alltypes&sort=lastpostdesc
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

What are the best ways (for best performance) in MII to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?

Hi All,
Can you please suggest to choose the best ways (for best performance) in MII (12.2 on NW 7.3), to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?
Thanks

Hi Surya,
Best practices for flow of data from ECC --> SAP MII --> Shop floor & Vice verse:
1. Send ECC data through IDOC's/RFC's as messages to SAP MII message listener and BSL transaction process data and update directly on shop floor database as if you configured in Data services or later send those data by web service to shop floor system (i.e. depends on Shop floor machines).
From Shop floor:
shop floor --> SAP MII --> ECC
1. Use either Web service or fetch data from DB and pass data to BAPI's for sending to ECC through BLS transaction.
Regards,
Praveen Reddy

How to check if Message already exists in the queue and if message is processing currently

Hi everyone
I am new to Azure and worked on adding messages to the queue through workerrole1. Worker role 2 pulls them out from queue and processing them and de-queing them.
Worker role1 runs method gets called after every 10 seconds and puts messages in queue
CloudQueueMessage
message = newCloudQueueMessage(oAzureWorker.WorkerInstanceOf
+ "_"+ oAzureWorker.AgentId.ToString()
+ "|"+ ExecutionId.ToString());
queue.AddMessage(message);
Worker role2 runs method gets called after every 10 seconds too and checks the queue like this
foreach
(CloudQueueMessagemessage
inqueue.GetMessages(20,
TimeSpan.FromMinutes(5)))
// Process all (20) messages in less than 5 minutes, deleting each message after processing.
// Process message
queue.DeleteMessage(message);
Following are my questions
1) How do I check in worker role1 if the message is already in queue, Because I don't want to queue it back again if its not yet processed and is in the queue already
2) How do I check in worker role1 if the message is currently processing. Because I don't want to queue it back again.
3) How do I make sure that ALL the messages get processed in the order they are inserted. I know Queue is FIFO, but I know if the message gets delayed in processing another instance can pick it up, even if it gets picked up by another instance, I want to
make sure that the order remains.
Right now the instances of both these worker roles are 1, in the future when we increase them, I don't want them to queue the same messages multiple times or queue them if the message is already in process mode.

Hi Sarah,
I agree to the Frank's suggestion. Why you need to burden the worker role 1 to check if the message really sits on the queue or not? You can do this simply in your code before pushing it on queue instead querying queue.
All you need to do on worker role 1 is - push the message on the queue and forget as the entire queue design in azure is designed from asynchronous processing.
About worker role 2 - Use the GetMessage method which hides retrieved message's from other clients and hence makes sure that only one client is processing it at a time. If processing is successful - delete the message. if it is not - the message will be
visible anyways after the mentioned time provided in the GetMessage method.
I agree that when you will increase number of instances of your worker role 1 which might insert duplicates in the queue - in that case - you might need to introduce the shared entity (like database) and let all instances communicate through it to avoid
the duplication of messages on queue.
Bhushan | http://www.passionatetechie.blogspot.com | http://twitter.com/BhushanGawale

Control recipe and process messages

Hi experts,
When I create a control recipe and send to an external destination, is it going as an outbound IDoc from SAP to external system?.
I have the same doubt about the process messages also. ie whether the process messages are coming from external system to SAP as inbound IDocs?
Thanks in advance
pradeep

Hi Prathib,
To realize data transfer between PP-PI and the control system, the SAP system provides the following alternative technologies:
· Function modules
· BAPIs (Business Application Programming Interfaces) that are defined as methods applied to SAP business objects and enable the standardized, object-oriented access to business functions in the SAP system. They are implemented as function modules, too.
Follow the link below for further detail
http://help.sap.com/saphelp_erp60_sp/helpdata/en/12/3bc6f8504811d182c20000e829fbfe/frameset.htm
Do let us knowi if you have any further query on the same
Thanks
Kaushik

Bpel process to take input and show message

Hii All,
I want to desgin a BPEL process whic will take three input variable and show message "Your ticket is booked".
Can anyone plz help me how to design it?
Thanks and regards,
Deekay.

Hi,
You have to modify the xsd of your project.
For example, for your project BPELProcess1.jpr, modify the file BPELProcess1.xsd :
<schema attributeFormDefault="unqualified"
     elementFormDefault="qualified"
     targetNamespace="http://xmlns.oracle.com/BPELProcess1"
     xmlns="http://www.w3.org/2001/XMLSchema">
     <element name="BPELProcess1ProcessRequest">
          <complexType>
               <sequence>
                    <element name="input1" type="string"/>
                    <element name="input2" type="string"/>
                    <element name="input3" type="string"/>
               </sequence>
          </complexType>
     </element>
     <element name="BPELProcess1ProcessResponse">
          <complexType>
               <sequence>
                    <element name="result" type="string"/>
               </sequence>
          </complexType>
     </element>
</schema>
Where do you want to show the message"Your ticket is booked" ?
Romain.

Process Instruction Characteristics

Hi
Can somebody give me some tips on how the Process instruction characteristics data is populated into the PI sheet.
regards
Kiki

hi,
follow the insructions-
1. process intructions contents process instruction category.This PI category contents PI characteristics.This PI characteristic contents characteristic values.Ex-If you select INSTR as PI category.It contents characteristic PPPI_INSTRUCTION.
2.Create control recipe destination in O10C.Enter your plant. entet your destination say 01- MIXING DIVISION.
3.select destination type- transfer to abap based PI sheet.
4.select process instructions to be generated.
5.enters at position & sequence-01
6.select -Ex--INSTR/ OR ANYOTHER KEY.
SAVE THE SETTING
select pi category assignment & assign the pi categories. save settings.
create master recipe.assign phase to operation.
select phase raw & double click.
You see the process instruction. assign pi category INSTR. enter the same. you see the characteristic. go to tab value. Here you could assign your process related intructions/ use PI assistant.
Regards,
Devendra

Process instruction characteristics and process messages

Similar Messages

Maybe you are looking for