Process Instruction Characteristics

Hi
Can somebody give me some tips on how the Process instruction characteristics data is populated into the PI sheet.
regards
Kiki

hi,
follow the insructions-
1. process intructions contents process instruction category.This PI category contents PI characteristics.This PI characteristic contents characteristic values.Ex-If you select INSTR as PI category.It contents characteristic PPPI_INSTRUCTION.
2.Create control recipe destination in O10C.Enter your plant. entet your destination say 01- MIXING DIVISION.
3.select destination type- transfer to abap based PI sheet.
4.select process instructions to be generated.
5.enters at position & sequence-01
6.select -Ex--INSTR/ OR ANYOTHER KEY.
SAVE THE SETTING
select pi category assignment & assign the pi categories. save settings.
create master recipe.assign phase to operation.
select phase raw & double click.
You see the process instruction. assign pi category INSTR. enter the same. you see the characteristic. go to tab value. Here you could assign your process related intructions/ use PI assistant.
Regards,
Devendra

Similar Messages

Process instruction characteristics and process messages

Hi,
Can anyone tell me why process instruction characteristics is required when only process message characteristics are displayed in PI sheets (input or output).
Regards
Joe

Hi,
Answer is already there in your question.
and that is
(input or output)
Now you creates the one Process Message characteristic let's it is Temperature.But how it's value comes in the PI Sheet (As Ouput or Input manually by user) that is decided by that Process Instruction Characteristic.
Now when you creates the Process Instruction Category (O12C) except type 0 you have choice of creates it by using help of Process Assistant.This Assistant assigns the Process Instruction Characteristic to the process Massage Characteristic automatically when you select the specific radio button or Activate the check box during that PI category creation.
For Example when you creates the PI category Type 2 using Assistant.Here after naming first screen comes to you is to define type of Process data Request.Here when you select the radio Button for Simple process data request then indirectly you assign the process Instruction characteristic PPPI_DATA_REQUEST_TYPE and its Value comes as Simple.
But when you create the PI category type 0 you have to assign this PI Characteristic manually because its Universal Category and there is no assistant which helps you.
Regards,
Dhaval

How to send process instructions to new pcs system

Hi, we have PCS system known as performer. we need to send the process order header data to this pcs system. i created all z characteristics and z process instruction type and assigned to CRD. Now i could not understand how to send this info to perfomer. do i need to send this to xi and from xi i need to send to performer? is there any way to send directly to performer? please guide me so that i follow the same.

Close inactive apps
1. Double tap the home button to bring up the multi-tasking view
2. Swipe the app's windows upwards to close
3. The app will fly off the screen
http://support.apple.com/kb/ht5137

Process message characteristics

hi experts ,
in standard process messgae characteristics we can see process message icon in first tab where we can give input help or
foriegn key etc. for characteristics starting with pppi.
same process message icon i want in Z-characteristics created by me , but its not appearing .
even if i copy the standard and create a new i dont get it .
is this standard SAP behaviour . how can i get that process message icon in a new characteristics .
please advice.
reagrds
satish

Dear,
If we see the characteristics of process management through CT04 an icon 'Proc. mgmt' appears for standard characteristics. But this icon does not appear if we create a characteristic manually. This is standard SAP behavior
Just assign process message category in process instruction category in O12C that's all.
Regards,
R.Brahmankar.

Process industry_PI characteristics

Dear friends,
I am creating mater recipe in t.code C201. While creating, i have given control recipe destination as "01" (Standard), process instruction category as "AORD_1 (Order data--standard).
Under AORD_1, i have called the following characteristics and assigned the characteristics value.
For example,
I have called "PPPI_ORDER_QUANTITY" and assigned the characteristics value of 5.00.
Could any one guide me , what is the importance of PPPI_ORDER_QUANTITY and how its characeristics value (5.00) influence on process order creation?
Any help will be very much appreaciated.
Thanks
Senthil

Hi Rishi,
I think you have maintained 03-Inspection type which is for inprocess inspection.
So when you are trying to confirm 011 operation, due to inspection type 03 maintained, it creates an inspection lot of the same type and as it is inprocess inspection , you have to do result recording for that particular lot.
So after doing result recording for that particular lot, I think this message will not come.
If you dont want inprocess inspection, remove inspection type from material master and if you want, then just do result recording.
Your problem will be solved.
Reward if it hepls.
Regards,
Sunny

Creating new characteristic in Process Instruction Sheet

I need to create new characteristics and i want them to appear on the PI sheet. i.e in the txn CO58. How do I do it?

Dear Neeraj,
First Define Char in O25C or CT04. Now check which Process Instruction Category You are using. You can check all PI categories in O12C. Now assign it under Characteristics/Process instruction category.
Regards
Abhijit Gautam

Custom process Instruction for co-product

Hello everyone,
I have a material BOM in which one of the components has negetive value and hence is a co-product.
Now i have a process order for this material,in which if i go inside operations and then by selecting a phase if i go for Process Instructions
there exists a Process Instruction category ZCONF in which i have created PI custom characteristics fot teh co-product.
Now the problem is I want to fetch the values from the BOm for the co-product when the process order is released.I am not able to find an exit for this.
Kindly help.
Regards,
Yashi Trivedi

Hi Yash,
The below statement is not so clear.
"Now the problem is I want to fetch the values from the BOm for the co-product when the process order is released.I am not able to find an exit for this".
What values are you trying to fectch to production order.
Regards,
Chinna.

Error while creating process instruction sheet in COR2

While creating Process instruction sheet, the following error is occuring. Please guide me to resolve the issue.
Define variable QTYPRODUCED for default value
Message no. CPOC110
Diagnosis
In the process instruction, variable QTYPRODUCED is defined for the value that you want the system to propose when data is entered in the PI sheet. This value does, however, not exist because it has not yet been defined as a variable.
If you want to use a variable in a process instruction, however, you must first have defined it in a preceding process instruction or in the same process instruction.
Procedure
Define variable QTYPRODUCED in one of the preceding process instructions or in the same process instruction.
Define Variable
Regards
Kumar

1. Assign characteristic PPPI_VARIABLE to the process instruction before the message characteristic to which the variable is to refer
2. Assign the required variable name to characteristic PPPI_VARIABLE.

How to print process instruction in process order.

Hi dudes,
,y client is not having Process management interface, but they want to maintain process instruction for phases in recipe and want to take print of process instructions in process order after release process order.
Please explain the path for printing process instructions copied into process order.
if some one assign PIs to phase in recipe, will control recipes be created after release of process order.
Regards
Daniel

The easiest way to do what you want is to actually create the PI sheet and then print it off from the view PI sheet transaction (CO60). This is then all standard functionality.
to do this you will need to set the configuration to create the control recipe when the process order is released and send it to a recipe destination.
Regards
Laurence

Updating a XML document with a processing instruction

Greetings Guru's
I have a fully functional XML database solution for our new system. The only thing left is for me to update a xml document in the database with a processing instruction to find the style sheet (JAXB strips it out when the XML must go back into the database).
I can update complete nodes and node elements in the xml document using updateXML in a regular update statement, but I do not know how to add the following processing instruction to my documents.
<?xml-stylesheet type="text/xsl" href="/RASWEB/JIT_REPORT.xslt"?>
[pre]
Thanks in advance
Derrick

SQL> var xmltext varchar2(4000)
SQL> --
SQL> begin
2    :xmlText := '<Hello>World</Hello>';
3 end;
4 /
PL/SQL procedure successfully completed.
SQL> drop table t
2 /
drop table t
ERROR at line 1:
ORA-00942: table or view does not exist
SQL> create table t of xmltype
2 /
Table created.
SQL> set long 10000
SQL> --
SQL> insert into t values (xmltype(:xmltext))
2 /
1 row created.
SQL> select *
2    from t
3 /
SYS_NC_ROWINFO$
<Hello>World</Hello>
SQL> update t set object_value = updateXML
2                              (
3                                object_value,
4                                '/',
5                                xmlconcat
6                                (
7                                  xmlpi("xml-stylesheet",'type="text/xsl" href="/RASWEB/JIT_REPORT.xslt"'),
8                                  object_value
9                                )
10                              )
11 /
1 row updated.
SQL> select * from t
2 /
SYS_NC_ROWINFO$
<?xml-stylesheet type="text/xsl" href="/RASWEB/JIT_REPORT.xslt"?>
<Hello>World</Hello>
SQL>

Process instructions for particular process order.

Hi SAP gurus,
How can I find table level data of process instructions (Like READ 1 , READ2 , INSTR ) maintain for particular process order.
If should not with respect to recipe but it should be respect to process order.
Can any Plz buddy explain me the chain of tables starting from order number?
Best Regards,
Parag Save

Hi...
i could not find the table for the relationship u r looking for... but i would suggest the following...
Go to SE16.. press F4 in the table list...go to the application help... their you will find tables for each module... even for PP you will find table specific to process industry... this you can search ur own what can be relevant for ur requirement... finally u can use SAP query to join some table to the get the information u want....
Try this...hopw it should work for u...
Neeraj

Process Instruction (PI) Sheet text (Browser version)

Our Process Instruction (PI) Sheet information is stored in the text tables (STXH/STXL) under TDOBJECT = 'COPOC' and TDID = '0001', but has a cryptic TDNAME key value. We use the 'browser' PI Sheet display version, not the ABAP base display version which stores the PI data on tables COCHP (Header data) and COFTP (PI Sheet: Process Instructions). Function Module COP0_DISPLAY_PI_SHEET would be used to display the ABAP PI Sheet information. During debug of tcode CO60 (Find PI Sheet), it appears that the Control Recipe (CRID) value is used to create the TDNAME key value via Classes/Methods. Unfortunately, accessing the text thru the different Classes does not seem straight forward. Does anyone have code/logic to extract the PI Sheet text directly using the CRID in a more simpler procedure?
Thank you in advance for your assistance.
jm

Hi,
use this Function module to get the text.
<b>COCB_CONTROL_RECIPE_GET_DETAIL</b> pass the control recipe ID.
try this also..
COCB_CONTROL_RECIPE_GET_TEXTS
regards
vijay
Message was edited by: Vijay Babu Dudla

Automatic Process Instructions - config trnx O10C

Automatic process instructions and messages are generated when the control recipe is created. These created instructions have an associated field "Line Number of Process Instruction" (field AFFTD-FTRNR). This field should designate the "sequence of process instructions within a phase".
I get only 2 values in this field, 0000 and 9999.
This works for PI Sheets. Internally SAP has a way to manage it.
Send to a control system ten times, phase 0020, instruction "9999 ACONS_1" ... The external system will get lost.
Is there a way to control the sequence of this number?
Thanks in advance.

Automatic process instructions and messages are generated when the control recipe is created. These created instructions have an associated field "Line Number of Process Instruction" (field AFFTD-FTRNR). This field should designate the "sequence of process instructions within a phase".
I get only 2 values in this field, 0000 and 9999.
This works for PI Sheets. Internally SAP has a way to manage it.
Send to a control system ten times, phase 0020, instruction "9999 ACONS_1" ... The external system will get lost.
Is there a way to control the sequence of this number?
Thanks in advance.

Seeking for API to deal with XML processing instructions

Hi all,
I have a requirement to list all the processing instructions inside a xml document.
E.g. For the document
<?xml version="1.0" encoding="utf-8"?>
<?AAA att1="att 1"?>
<?BBB?>
<?CCC?>
<body>
<empty>True</empty>
</body>
I need to print out PIs AAA, BBB, CCC.
Two solutions i can find are:
1. to treat the doc as a string and do a pattern search for <?*?>.
2. use IF_IXML_DOCUMENT to traverse all the nodes and check their node types against IF_IXML_NODE=>CO_NODE_PI_PARSED and TYPE = IF_IXML_NODE=>CO_NODE_PI_UNPARSED.
However, I am wondering if there's any xml API to deal with XML PIs.
During my research on this, i got IF_IXML_DOCUMENT. It provides two creation APIs for XML PI: CREATE_PI_PARSED and CREATE_PI_UNPARSED. However, there is no corresponding getter API found.
Does anybody know if there is such one?
Thanks in advance.

Never do yourself down Richard.
Leave that to other people.
It's quite common for smart developers to think they're not as good as they are.
I coach a fair bit and it's a surprisingly common feeling.
And to repeat.
Never use anything ends .. provider. They're for trivial demo apps. Transform xml into objects and use them. Write it back as xml. Preferably, use a database.
You want to read a little mvvm theory first.
http://en.wikipedia.org/wiki/Model_View_ViewModel
Whatever you do, don't read Josh Smiths explanation. I used to recommend it but it confuses the heck out newbies. Leave that until later.
Laurent Bugnion did a great presentation at mix10. Unfortunately that doesn't seem to be working on the MS site, but I have a copy. Download and watch:
http://1drv.ms/1IYxl3z
I'm writing an article at the moment which is aimed at beginners.
http://social.technet.microsoft.com/wiki/contents/articles/30564.wpf-uneventful-mvvm.aspx
The sample is just a collection of techniques really.
I have a sample which involves no real data but is intended to illustrate some aspects of how viewmodels "do stuff" and how you use datatemplates to generate UI.
I can't remember if I recommended it previously to you:
https://gallery.technet.microsoft.com/WPF-Dialler-simulator-d782db17
And I have working samples which are aimed at illustrating line of business architecture. This is an incomplete step by step series but I think more than enough to chew on once you've done the previous stuff.
http://social.technet.microsoft.com/wiki/contents/articles/28209.wpf-entity-framework-mvvm-walk-through-1.aspx
The write up for step2 is work in progress.
https://gallery.technet.microsoft.com/WPF-Entity-Framework-MVVM-78cdc204
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML

XML parsing error: xml processing instruction not at start of external entity (error code 17)

I created a form and recieve the filled in form by email from participants. It has always worked in the past. Recently when importing data into the master form (from filled in forms in xml files sent by applicants) I am getting this error message..."xml processing instruction not at start of external entity (error code 17), line 2, column 1...." pointing to the file of data (xml) I am trying to input. If I pull up old data forms (from 2009) they work, but now I am getting this error. I run Adobe Design Premium CS3 for Windows. Can anyone tell me what to do to fix?

I created a form and recieve the filled in form by email from participants. It has always worked in the past. Recently when importing data into the master form (from filled in forms in xml files sent by applicants) I am getting this error message..."xml processing instruction not at start of external entity (error code 17), line 2, column 1...." pointing to the file of data (xml) I am trying to input. If I pull up old data forms (from 2009) they work, but now I am getting this error. I run Adobe Design Premium CS3 for Windows. Can anyone tell me what to do to fix?

Process Instruction Characteristics

Similar Messages

Maybe you are looking for