Process instruction

Hi
Can any one give dtails of Configuration and Tcodes for PP-Pi
regards

Hi,
Pls. find PP-PI Tcode list as below :
PP-PI TCODES:
CRC1 - Create Resource
CR24 - Create Resource Network
CR31 - Create Hierarchy
C201 - Create Master Recipe
C251 - Print Master Recipe
C223 - Maintain Production Versions
COIO - Order Info System for PP-PI
COPD - Print Process Order
COPI - Print Process Order ShopFloor Papers
COR1 - Create Process Order
COR5 - Collective Process Order Release
COR6 - Single Process Order Confirmation
COR6N - Single Screen Entry of Confirmations
COR7 - Convert Planned Order to Proc. Order
COR7_PC - Part.Conv.: Plnned Ord. to Proc.Ord.
COR8 - Coll.Conv.: Plnned Ord. to Proc.Ord.
CORK - Process Order Confirmations (Total)
CORM - Mass Processing
CORO - Create Process Order w/o Material
CORR - Collective Entry of Confirmations
CORS - Cancel Process Order Confirmation
CORT - Display Process Order Confirmation
CORZ - Process Order: Time Event Confirmat.
COA6 - Process Order: Archiving
COA7 - Process Order: Retrieval - Archive
COA8 - Process Order: Archive Management
CO56 - Display PI Sheet
CO58 - Maintain PI Sheet
CO59 - Delete PI Sheet
CO60 - Find PI Sheet
COPOC - Process Manufacturing Cockpit
CO53 - Control Recipe Monitor
O10C - Assig. Ctrl Rec. Dest./Proc. Instr.
O12C - Assign Charact. / Proc. Instr. Cat.
List of PP-PI Transport Request and their IMG Path :
1) Define Distribution Keys
IMG > Production Planning for Process Industries > Master Data > Material List > Item Data > Item Data from related areas > Define Distribution Keys
2) Determine Person responsible for Resource u2013
IMG > Production Planning for Process Industries > Master Data > Resource > General Data > Determine Person responsible
3Define Planner Group-
IMG > Production Planning for Process Industries > Master Data > Master Recipe > Define Capacity Planner
4) Define Capacity Planner u2013
IMG > Production Planning for Process Industries > Master Data > Resource > Capacity Requirement Planning > Determine Capacity Planner
5) Determine Standard Value Parameter u2013
IMG > Production Planning for Process Industries > Master Data > Resource > General Data > Standard Value > Define Parameter
6) Define Setup Groups and Setup Group Categories
Define set up groups and set up categories u2013
IMG > Production Planning for Process Industries > Master Data > Master Recipe > Data for operations and phases > Define set up groups and set up group categories
7) Define copy setting between plants-Process
IMG > Production Planning for Process Industries > Process Management > Tools > Define copy setting between plants
8) Define Set Up Control Recipe destination u2013
IMG > Production Planning for Process Industries > Process Management > Control Recipe/PI sheet > Set up control recipe destination
9Define MRP controller u2013
IMG > Material Management > Consumption based Planning > Master Data > Define MRP controller
10) Special Procurement u2013
IMG > Material Management > Consumption based Planning > Master Data > Define Special procurement types
11) Define Floats (Scheduled Margin Key)-
IMG > Material Management > Consumption based Planning > Planning > Define Floats (Scheduled Margin Key)
12Define Splitting of Forecast requirements for MRP-
IMG > Material Management > Consumption based Planning > Evaluation > Forecast > Define Splittng of forecast requirements of MRP
13) Maintain Correction Factors for Forecast
IMG > Material Management > Consumption based Planning > Planning > Procurement > Maintain Correction factors for forecast
14 Carry Out Overall Maintenance of Plant Parameters
Maintaining plant parameters in MRP u2013
IMG > Material Management > Consumption based Planning > Plant Parameters > Carry out overall maintenance of plant parameters
15) Define Planning Horizon
Define Planning Horizon u2013
IMG > Material Management > Consumption based Planning > Planning > MRP calculation > Define Planning Horizon
16) Activate Requirement Planning u2013
IMG > Material Management > Consumption based Planning > Planning > Activate Requirement Planning
17) Define Range of Coverage Profiles (Dynamic Safety Stock)
Range of coverage profile u2013
IMG > Material Management > Consumption based Planning > Planning > MRP calculation > Define range of coverage profile (Dynamic Safety Stock)
18) Define Stock in Transfer and Blocked Stock Availability
IMG > Material Management > Consumption based Planning > Planning > MRP calculation > Stocks > Define Stock in transfer and blocked stock
19) Define MRP Areas
IMG > Material Management > Consumption based Planning > Master Data > MRP areas > Define MRP areas
20) Carry out maintenance of MRP groups
IMG > Material Management > Consumption based Planning > MRP groups> Carry out maintenance of MRP groups
21) Define Scope of total Planning - MRP
IMG > Material Management > Consumption based Planning > Planning > Define Scope of total Planning
22 Define Order Types
Define Order Type-
IMG > Production Planning for Process Industries > Process Order > Master Data > Order > Define Order Type
23Define Order Type Dependent parameters u2013
IMG > Production Planning for Process Industries > Process Order > Master Data > Order > Define Order Type Dependent parameters
24) Define Production Scheduler u2013
IMG > Production Planning for Process Industries > Process Order > Master Data > Bill of Material > Define Production Scheduler
25 Define Checking Control - Process Order
Define Availability Check u2013 Define Checking Control u2013
IMG > Production Planning for Process Industries > Process Order > Operations > Availabilty Check > Define Checking Control
26) Define Checking Rule for backorder processing u2013
IMG > Production Planning for Process Industries > Process Order > Operations > Availabilty Check > Define Checking rule for back order processing
27Define Stock and batch determination for good movement u2013
IMG > Production Planning for Process Industries > Process Order > Operations > Define Stock and batch determination for good movement
28) Specify Scheduling Parameters
Specify Scheduling Parameters u2013
IMG > Production Planning for Process Industries > Process Order > Operations > Scheduling > Specify Scheduling Parameters
29) Define Reduction Strategies
Define Reduction Strategy u2013
IMG > Production Planning for Process Industries > Process Order > Operations > Scheduling > Resource data > Define Reduction Strategy
30) Define Confirmation Parameters
Define Order Confirmation u2013
IMG > Production Planning for Process Industries > Process Order > Operations >
Confirmation > Define Confirmation Parameters
31) Define Valuation of Goods Received
Define valuation of goods receive u2013
IMG > Production Planning for Process Industries > Process Order > Integration > Define Valuation of goods received
32) MRP creation indicator u2013
IMG > Material Management > Consumption based Planning > Planning > Define creation indicator
33) Define safety stock u2013
IMG > Material Management > Consumption based Planning > Planning > MRP calculation > Stocks > Define Safety Stocks
34) Define alternative determination of Production u2013
IMG > Production Planning for Process Industries > Process Order > Operations > BOM selection > Define alternate determination of production
35) Define no. ranges u2013
IMG > Production Planning for Process Industries > Process Order > Master data > Order > Number Ranges > Define number ranges for orders
HOpe this helps.
Reward if useful.
Regards,
Tejas
Edited by: Tejas Pujara on Jul 24, 2008 9:22 AM

Similar Messages

Error while creating process instruction sheet in COR2

While creating Process instruction sheet, the following error is occuring. Please guide me to resolve the issue.
Define variable QTYPRODUCED for default value
Message no. CPOC110
Diagnosis
In the process instruction, variable QTYPRODUCED is defined for the value that you want the system to propose when data is entered in the PI sheet. This value does, however, not exist because it has not yet been defined as a variable.
If you want to use a variable in a process instruction, however, you must first have defined it in a preceding process instruction or in the same process instruction.
Procedure
Define variable QTYPRODUCED in one of the preceding process instructions or in the same process instruction.
Define Variable
Regards
Kumar

1. Assign characteristic PPPI_VARIABLE to the process instruction before the message characteristic to which the variable is to refer
2. Assign the required variable name to characteristic PPPI_VARIABLE.

How to print process instruction in process order.

Hi dudes,
,y client is not having Process management interface, but they want to maintain process instruction for phases in recipe and want to take print of process instructions in process order after release process order.
Please explain the path for printing process instructions copied into process order.
if some one assign PIs to phase in recipe, will control recipes be created after release of process order.
Regards
Daniel

The easiest way to do what you want is to actually create the PI sheet and then print it off from the view PI sheet transaction (CO60). This is then all standard functionality.
to do this you will need to set the configuration to create the control recipe when the process order is released and send it to a recipe destination.
Regards
Laurence

Updating a XML document with a processing instruction

Greetings Guru's
I have a fully functional XML database solution for our new system. The only thing left is for me to update a xml document in the database with a processing instruction to find the style sheet (JAXB strips it out when the XML must go back into the database).
I can update complete nodes and node elements in the xml document using updateXML in a regular update statement, but I do not know how to add the following processing instruction to my documents.
<?xml-stylesheet type="text/xsl" href="/RASWEB/JIT_REPORT.xslt"?>
[pre]
Thanks in advance
Derrick

SQL> var xmltext varchar2(4000)
SQL> --
SQL> begin
2 :xmlText := '<Hello>World</Hello>';
3 end;
4 /
PL/SQL procedure successfully completed.
SQL> drop table t
2 /
drop table t
ERROR at line 1:
ORA-00942: table or view does not exist
SQL> create table t of xmltype
2 /
Table created.
SQL> set long 10000
SQL> --
SQL> insert into t values (xmltype(:xmltext))
2 /
1 row created.
SQL> select *
2 from t
3 /
SYS_NC_ROWINFO$
<Hello>World</Hello>
SQL> update t set object_value = updateXML
2 (
3 object_value,
4 '/',
5 xmlconcat
6 (
7 xmlpi("xml-stylesheet",'type="text/xsl" href="/RASWEB/JIT_REPORT.xslt"'),
8 object_value
9 )
10 )
11 /
1 row updated.
SQL> select * from t
2 /
SYS_NC_ROWINFO$
<?xml-stylesheet type="text/xsl" href="/RASWEB/JIT_REPORT.xslt"?>
<Hello>World</Hello>
SQL>

Process instructions for particular process order.

Hi SAP gurus,
How can I find table level data of process instructions (Like READ 1 , READ2 , INSTR ) maintain for particular process order.
If should not with respect to recipe but it should be respect to process order.
Can any Plz buddy explain me the chain of tables starting from order number?
Best Regards,
Parag Save

Hi...
i could not find the table for the relationship u r looking for... but i would suggest the following...
Go to SE16.. press F4 in the table list...go to the application help... their you will find tables for each module... even for PP you will find table specific to process industry... this you can search ur own what can be relevant for ur requirement... finally u can use SAP query to join some table to the get the information u want....
Try this...hopw it should work for u...
Neeraj

Process Instruction (PI) Sheet text (Browser version)

Our Process Instruction (PI) Sheet information is stored in the text tables (STXH/STXL) under TDOBJECT = 'COPOC' and TDID = '0001', but has a cryptic TDNAME key value. We use the 'browser' PI Sheet display version, not the ABAP base display version which stores the PI data on tables COCHP (Header data) and COFTP (PI Sheet: Process Instructions). Function Module COP0_DISPLAY_PI_SHEET would be used to display the ABAP PI Sheet information. During debug of tcode CO60 (Find PI Sheet), it appears that the Control Recipe (CRID) value is used to create the TDNAME key value via Classes/Methods. Unfortunately, accessing the text thru the different Classes does not seem straight forward. Does anyone have code/logic to extract the PI Sheet text directly using the CRID in a more simpler procedure?
Thank you in advance for your assistance.
jm

Hi,
use this Function module to get the text.
COCB_CONTROL_RECIPE_GET_DETAIL pass the control recipe ID.
try this also..
COCB_CONTROL_RECIPE_GET_TEXTS
regards
vijay
Message was edited by: Vijay Babu Dudla

Process instruction characteristics and process messages

Hi,
Can anyone tell me why process instruction characteristics is required when only process message characteristics are displayed in PI sheets (input or output).
Regards
Joe

Hi,
Answer is already there in your question.
and that is
(input or output)
Now you creates the one Process Message characteristic let's it is Temperature.But how it's value comes in the PI Sheet (As Ouput or Input manually by user) that is decided by that Process Instruction Characteristic.
Now when you creates the Process Instruction Category (O12C) except type 0 you have choice of creates it by using help of Process Assistant.This Assistant assigns the Process Instruction Characteristic to the process Massage Characteristic automatically when you select the specific radio button or Activate the check box during that PI category creation.
For Example when you creates the PI category Type 2 using Assistant.Here after naming first screen comes to you is to define type of Process data Request.Here when you select the radio Button for Simple process data request then indirectly you assign the process Instruction characteristic PPPI_DATA_REQUEST_TYPE and its Value comes as Simple.
But when you create the PI category type 0 you have to assign this PI Characteristic manually because its Universal Category and there is no assistant which helps you.
Regards,
Dhaval

Automatic Process Instructions - config trnx O10C

Automatic process instructions and messages are generated when the control recipe is created. These created instructions have an associated field "Line Number of Process Instruction" (field AFFTD-FTRNR). This field should designate the "sequence of process instructions within a phase".
I get only 2 values in this field, 0000 and 9999.
This works for PI Sheets. Internally SAP has a way to manage it.
Send to a control system ten times, phase 0020, instruction "9999 ACONS_1" ... The external system will get lost.
Is there a way to control the sequence of this number?
Thanks in advance.

Automatic process instructions and messages are generated when the control recipe is created. These created instructions have an associated field "Line Number of Process Instruction" (field AFFTD-FTRNR). This field should designate the "sequence of process instructions within a phase".
I get only 2 values in this field, 0000 and 9999.
This works for PI Sheets. Internally SAP has a way to manage it.
Send to a control system ten times, phase 0020, instruction "9999 ACONS_1" ... The external system will get lost.
Is there a way to control the sequence of this number?
Thanks in advance.

Seeking for API to deal with XML processing instructions

Hi all,
I have a requirement to list all the processing instructions inside a xml document.
E.g. For the document
<?xml version="1.0" encoding="utf-8"?>
<?AAA att1="att 1"?>
<?BBB?>
<?CCC?>
<body>
<empty>True</empty>
</body>
I need to print out PIs AAA, BBB, CCC.
Two solutions i can find are:
1. to treat the doc as a string and do a pattern search for <?*?>.
2. use IF_IXML_DOCUMENT to traverse all the nodes and check their node types against IF_IXML_NODE=>CO_NODE_PI_PARSED and TYPE = IF_IXML_NODE=>CO_NODE_PI_UNPARSED.
However, I am wondering if there's any xml API to deal with XML PIs.
During my research on this, i got IF_IXML_DOCUMENT. It provides two creation APIs for XML PI: CREATE_PI_PARSED and CREATE_PI_UNPARSED. However, there is no corresponding getter API found.
Does anybody know if there is such one?
Thanks in advance.

Never do yourself down Richard.
Leave that to other people.
It's quite common for smart developers to think they're not as good as they are.
I coach a fair bit and it's a surprisingly common feeling.
And to repeat.
Never use anything ends .. provider. They're for trivial demo apps. Transform xml into objects and use them. Write it back as xml. Preferably, use a database.
You want to read a little mvvm theory first.
http://en.wikipedia.org/wiki/Model_View_ViewModel
Whatever you do, don't read Josh Smiths explanation. I used to recommend it but it confuses the heck out newbies. Leave that until later.
Laurent Bugnion did a great presentation at mix10. Unfortunately that doesn't seem to be working on the MS site, but I have a copy. Download and watch:
http://1drv.ms/1IYxl3z
I'm writing an article at the moment which is aimed at beginners.
http://social.technet.microsoft.com/wiki/contents/articles/30564.wpf-uneventful-mvvm.aspx
The sample is just a collection of techniques really.
I have a sample which involves no real data but is intended to illustrate some aspects of how viewmodels "do stuff" and how you use datatemplates to generate UI.
I can't remember if I recommended it previously to you:
https://gallery.technet.microsoft.com/WPF-Dialler-simulator-d782db17
And I have working samples which are aimed at illustrating line of business architecture. This is an incomplete step by step series but I think more than enough to chew on once you've done the previous stuff.
http://social.technet.microsoft.com/wiki/contents/articles/28209.wpf-entity-framework-mvvm-walk-through-1.aspx
The write up for step2 is work in progress.
https://gallery.technet.microsoft.com/WPF-Entity-Framework-MVVM-78cdc204
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML

XML parsing error: xml processing instruction not at start of external entity (error code 17)

I created a form and recieve the filled in form by email from participants. It has always worked in the past. Recently when importing data into the master form (from filled in forms in xml files sent by applicants) I am getting this error message..."xml processing instruction not at start of external entity (error code 17), line 2, column 1...." pointing to the file of data (xml) I am trying to input. If I pull up old data forms (from 2009) they work, but now I am getting this error. I run Adobe Design Premium CS3 for Windows. Can anyone tell me what to do to fix?

I created a form and recieve the filled in form by email from participants. It has always worked in the past. Recently when importing data into the master form (from filled in forms in xml files sent by applicants) I am getting this error message..."xml processing instruction not at start of external entity (error code 17), line 2, column 1...." pointing to the file of data (xml) I am trying to input. If I pull up old data forms (from 2009) they work, but now I am getting this error. I run Adobe Design Premium CS3 for Windows. Can anyone tell me what to do to fix?

XML Processing Instructions

Hi,
I have two questions about how the XML class in AS3 works.
First, does the XML class care about the initial processing instruction when created from a string like this?:
<?xml version="1.0" encoding="UTF-8" ?>
<painting>
<img src="madonna.jpg" alt='Foligno Madonna, by Raphael'/>
<caption>This is Raphael's "Foligno" Madonna, painted in
<date>1511</date>–<date>1512</date>.
</caption>
</painting>
Second, how can I add that procession instruction to an XML object that I am working with so that toXMLString() returns a string that looks like the above XML? (So that it includes the processing instruction.)

Hi!
Normally you won't see processing instructions when working with AS3 and XML but you can change that using the following line of code:
XML.ignoreProcessingInstructions = false;
If you will, you can also see your comments by using the following:
XML.ignoreComments = false;
I think it's usual to use those lines inside your package body, even before your imports but I think you could have it anywhere else (even outside your package body I think).
Hope it helps.
edit: don't forget you can manage those items as a XMLList too...

How to use System Variable SY_ROW in the Process Instruction Category

Hi ,
I want to assign a value of System variable SY_ROW to a Normal Variable in the Process Instruction Category and use it in the formula. Please help me with the Syntax in the Process Instruction Category to get the System Variable: SY_ROW value into a Variable.
Thanks,
SV

Hello,
You can use these variables in formulas or, for example, to pass on certain pieces of information to a function module. How the function called by the function module behaves depends on the type of information passed on.
SY_ROW is used to view the current Table line.
Please look into the below link for more details on syntax :
http://help.sap.com/saphelp_46c/helpdata/en/1a/514e38493e4774e10000009b38f889/frameset.htm
http://help.sap.com/saphelp_470/helpdata/en/1a/514e38493e4774e10000009b38f889/frameset.htm
Hope the information is helpful
Regards

XSLT processing instructions ignored, and namespaces excluded

Hi folks,
I am developing a BPEL process and created the following XSLT:
<xsl:stylesheet version="1.0"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:ehdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.esb.server.headers.ESBHeaderFunctions"
xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
 xmlns:agrlib="http://services.agresso.com/schema/ABWSchemaLib/2005/05/13"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
 exclude-result-prefixes="xsl xp20 bpws ora ehdr orcl ids hwf">
 <xsl:output omit-xml-declaration="no"/>
<xsl:output standalone="yes"/>
 <xsl:template match="*[not(node())]"/>
<xsl:template match="node()">
<xsl:copy>
<xsl:apply-templates select="node()"/>
</xsl:copy>
</xsl:template>
</xsl:stylesheet>
The transform activity is:
<copy>
<from expression="ora:processXSLT('Transformation_1.xsl',bpws:getVariableData('Variable_1'))"/>
<to variable="Variable_2"/>
</copy>
This XSLT has been tested in Oxygen and produces the required result with the required namespaces included...i.e.

<?xml version="1.0" encoding="utf-8"?>


<ABWSupplierCustomer xmlns="http://services.agresso.com/schema/ABWSupplierCustomer/2005/05/13" xmlns:agrlib="http://services.agresso.com/schema/ABWSchemaLib/2005/05/13" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">


...rest of file...
But when the BPEL process executes, it outputs this:


<ABWSupplierCustomer xmlns="http://services.agresso.com/schema/ABWSupplierCustomer/2005/05/13">

Anyone any ideas?

This is how I create my DOM...
DocumentBuilder builder = DocumentBuilderFactory.newInstance().newDocumentBuilder();
org.w3c.dom.Document doc = builder.newDocument();
Element docElement = doc.createElement("Document");
docElement.setAttribute("Title", "Home");
org.w3c.dom.ProcessingInstruction pi = doc.createProcessingInstruction("xml", "type=\"xslt\"");
doc.appendChild( pi );
doc.appendChild( docElement );
And this is the output I get...
<?xml version="1.0"?>
<Document Title="Home"/>
I dont get it, Im using jdk1.4.0, and you get the processing instruction coming through, but I dont...?

OSB Proxy Service - ignore XML processing instructions (PIs)

Hello,
I've got a proxy service in OSB that takes any XML, transforms it, and passes it through to a business service. i.e. it just has a simple routing node containing something like:
Route to [ BusinessServiceDB ] invoking [ merge ]
Replace [ node contents ] of [ undefined XPath ] in [ body ] with [ XQuery Resource... ]
This works fine until the XML contains a processing instruction other than the standard XML version one; <?XML...?>. So if the first line (or first line after the XML version, if present) contains a PI (e.g. <?some-app-specific-instruction?>), then the proxy service passes nothing through to the Business Service.
Well, I guess it assumes that the <?some-app-specific-instruction?> is the entire node contents, and so effectively passes through nothing that matches in the XQuery code...
Is there a setting or easy way to make OSB globally ignore PIs? Or will I have to do something with the Replace, e.g. define the XPath or variable bindings differently?
Cheers...

Thanks, I will do that...once I've found out what our support ID is.
The problem is easily repeatable in less than five minutes - all you have to do is create an 'Any XML' JMS proxy service (with all settings as defauts), and just have an empty route node in the message flow.
Then all you do is try the test console with something like "<blah>test</blah>" as the payload; on the results you will see the correct XML inside the soapenv body when you expand: receiving request > Initial Message Context > $body. Then repeat the test with"<?something?><blah>test</blah>", which will only pass through the soapenv:Body tag with no contents.
I presume this is not expected behaviour? i.e. OSB isn't meant to try the processing instruction, then pass through the results of that? I can't imagine it would...
Anyway, as I say, I will raise the support request...but if anyone that is on a version above 10.3.1 has time to quickly run this test and let me know the results, I'd be really grateful.

JAXB v. processing instructions

Hey,
I've been trying JAXB and everithing works fine, only question rised up that is there a way to get/process/generate processing instructions via JAXB? Or even if it is reasonable (since XSD doesn't seem to suport processing instructions).
If there isn't good way to implement processing instructions in JAXB then is there a good pattern how to do a work-around?
regards,
Hardi

In a Schema the <xs:appInfo/> element specifies the instruction for the application.
<xs:annotation>
<xs:appinfo>
<fn:applicationInstruction>
Instruction for Application
</fn:applicationInstruction>
</xs:appinfo>
</xs:annotation>

Adding Processing Instruction in the insertionpoint

Hi,
I want insert processing instruction to the insertionpoint[0], is that possible?
something like this,
var PI = app.selection[0].insertionPoints[0];
PI.xmlInstructions.add("target", "data");
Vandy

Hello Vandy,
try this:
var PI = app.selection[0].insertionPoints[0];
var xmlElementOfPI = PI.associatedXMLElements[0];
xmlElementOfPI.xmlInstructions.add("target","data", PI);
Roland

Process instruction

Similar Messages

Maybe you are looking for