Process Integrator and WL6
When is PI going to be available for WL6, anyone have any idea?
We want to use PI, but are using WL6, I couldn't believe it when I saw that
the new release of PI 1.2 requires 5.1.
What can we do???
Thanks
Rich
To get an exact date, please talk to your BEA sales rep. I believe that the
last date I heard was sometime next month (this comment is just informational
and not a committment by BEA)...
weblogic wrote:
When is PI going to be available for WL6, anyone have any idea?
We want to use PI, but are using WL6, I couldn't believe it when I saw that
the new release of PI 1.2 requires 5.1.
What can we do???
Thanks
Rich
Similar Messages
-
Hi SAP Gurus,
I have installed an SAP PO system and am running the Config Wizard from NWA. The functional unit I have selected from NWA is - "Process Integration and Orchestration Package". This functional unit has in turn selected few more functional units like AEX, SLD. The issue that I am facing is that the wizard does not appear for my inputs and it shows that the selected wizards are running. Please see attachment "config_wizard_running.jpeg"
I read some forums and found a thread where in it was mentioned how to stop the config wizard and restart it. http://scn.sap.com/thread/1422958
Even after restarting my server, the functional units are still showing as running in NWA --> Configuration --> Scenarios --> Configuration Wizard --> Functional Unit Configuration UI. Please see attachment "Config_wizard_stuck.jpeg"
I restarted the application as suggested in the post so that I could run Config Wizard again. But its now allowing me to start it as the status is Running.
Please suggest.
Regards,
AmitHi Dimitri,
Thanks a lot. I have resetted the functional units. This time the wizard comes up ok.
Regards,
Amit -
Hi
I am trying to use Process Integrator with two realms, LDAP for my project
and the RDBMS one for Cloudscape. My problem is that if I define the realm
as
weblogic.security.realmClass=weblogic.security.ldaprealm.LDAPRealm
even if I add all the groups and the acls in the ldap (originally in
Cloudscape), the system does not allow me to authenticate, i.e. if I try to
use The PI Studio, it fails the authorisation as admin.
I have tried various combinations of the realms and the acls, but nothing
works. Does anyone have any idea how to make the ldap realm work with the
authorisation?
Thanx,
Kostas.Not yet. But, they will later on this spring.
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
"Michael Madrid" <[email protected]> wrote in message
news:[email protected]..
Do PI and Collaborate run on WLS 6.0? If not, when are there plans forthem
to? -
Hi,
What is SAP PO ( Process Orchestration ) ? How SAP PO is different from SAP PI.
Regards
Ravi GroverHi Ravi,
You can refer above helpful links, shared by hareesh and Harish
Here is one heirarchy for better understanding of NW PO
PI is straight forward : either Single Stack(AEX) or DS
In SAP NW PO(bundle of PI + BPM + BRM) we have 3 options:
1. We have Single stack option , on one System i.e. All together, BRM(Java) + BPM(Java) + PI(AEX)
2. We have Single stack option, on Seperate Systems i.e. {BRM(Java) + BPM(Java)} on one system + PI(AEX) on seperate
3. BPM(Java) + BRM(Java) on one system and PI(DS) on one system
However PI 7.31 can also be installed individually(i.e. without NW BPM and BRM)
Thanks,
Aman -
Process Integrator and Collaborate on WLS 6.0
Do PI and Collaborate run on WLS 6.0? If not, when are there plans for them
to?Not yet. But, they will later on this spring.
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
"Michael Madrid" <[email protected]> wrote in message
news:[email protected]..
Do PI and Collaborate run on WLS 6.0? If not, when are there plans forthem
to? -
Javlin and WL Process Integrator
Does anyone have any ideas how Javlin can be used with the WebLogic
Process Integrator?
DaveDavid Mrozek wrote:
>
Hi,
I'm evaluating WL Process Integrator and Collaborate products.
I need some quick answers to the following:
1. Does WL Process Integrator require its own dedicated WL process?Not necessarily. There is nothing stopping you from running WLPI
along with any other app. WLPI is "merely" a collection of EJBs,
and will quite happily co-exist with other apps.
2. Can WL Process Integrator servers be clustered?Not in the current release. WLPI1.2 makes heavy use of JMS, which
is not clusterable in WLS5.1.
3. Does Collaborate requires its own dedicated WL process?Again, not necessarily.
4. Can Collaborate servers be clustered?Not in the current release.
regards,
Per Jessen
(Senior Systems Engineer, BEA Switzerland) -
Solution Manager - Process Integration
Hi Experts,
I have good experience in SAP Process Integration and Medium level of experience in PI Administration,
Now i am planning to learn Solution Manger, purpose here is to cover Basis and PI Administartion through SOLMAN .
Planning to enroll my self in SAP Educataion,but failed to find relevent course.
Any one pls help me on this.
Regards,
RajHi
Based upon the version you would like to explore goto SMP in RKT and choose the following portion and mainly Technical configuration in the same.
SAP Solution Manager 7.1 : SAP Solution Manager Setup and Operation
SAP Solution Manager 7.0 - EHP1: Overview and Set up of SAP Solution Manager
for sap education
https://training.sap.com/in/en/search?SolutionId=132&FocusAreaId=3%2C1#certification
Regards
Prakhar -
Process Integrator authorization question
Regarding the API that Process integrator exposes for both the client and server
is there any authorization performed at the EJB and method level. I haven't found
any documentation on this. For example, I log in as a non-admin user into Process
Integrator and use the EJB Admin object to try and create a template definition,
but I shouldn't have the permission to do this.I don't know much about WLPI, but I have forwarded this along internally and
someone should be contacting you soon.
Thanks,
Michael
Michael Girdley
BEA Systems Inc
"Hugo Penafiel" <[email protected]> wrote in message
news:[email protected]..
Hi,
I'm not sure where to ask a Process Integrator question so I have
decided to ask here. I have been asked to look at business
process (workflow) automation. I have read the datasheet and your
whitepaper on Process Integrator and my question at the moment
is "How do we integrate Process Integrator with existing sets of
EJB's? How does it tie together with WebLogic 5.1 (is it a bunch
of EJB's deployed on top of the app server ala Commerce Server)?
I'm looking for more technical answers so that I have some
understanding in estimating how much work/effort it would take
to use this product. I also know that this is your engine for your
future Collaborate product, however, that product will not be
available soon enough to tackle our customers current needs.
Thanks for your patience in reading this long message and
I would appreciate any answers including "forget about it until
Collaborate goes to market!". I would like to give an honest
technical reason to my manager about why we should
consider using Process Integrator.
Thanks again!
Hugo
408-861-5292
marchFIRST
Cupertino, CA 95014 -
Process Integrator question?
Hi,
I'm not sure where to ask a Process Integrator question so I have
decided to ask here. I have been asked to look at business
process (workflow) automation. I have read the datasheet and your
whitepaper on Process Integrator and my question at the moment
is "How do we integrate Process Integrator with existing sets of
EJB's? How does it tie together with WebLogic 5.1 (is it a bunch
of EJB's deployed on top of the app server ala Commerce Server)?
I'm looking for more technical answers so that I have a reasonable
understanding in estimating how much work/effort it would take
to use this product. I also know that this is your engine for your
future Collaborate product, however, that product will not be
available soon enough to tackle our customers current needs.
Thanks for your patience in reading this long message and
I would appreciate any answers including "forget about it until
Collaborate goes to market!". I would like to give an honest
technical reason to my manager about why we should
consider (or not consider) using Process Integrator.
Thanks again!
Hugo
408-861-5292
marchFIRST
Cupertino, CA 95014I don't know much about WLPI, but I have forwarded this along internally and
someone should be contacting you soon.
Thanks,
Michael
Michael Girdley
BEA Systems Inc
"Hugo Penafiel" <[email protected]> wrote in message
news:[email protected]..
Hi,
I'm not sure where to ask a Process Integrator question so I have
decided to ask here. I have been asked to look at business
process (workflow) automation. I have read the datasheet and your
whitepaper on Process Integrator and my question at the moment
is "How do we integrate Process Integrator with existing sets of
EJB's? How does it tie together with WebLogic 5.1 (is it a bunch
of EJB's deployed on top of the app server ala Commerce Server)?
I'm looking for more technical answers so that I have some
understanding in estimating how much work/effort it would take
to use this product. I also know that this is your engine for your
future Collaborate product, however, that product will not be
available soon enough to tackle our customers current needs.
Thanks for your patience in reading this long message and
I would appreciate any answers including "forget about it until
Collaborate goes to market!". I would like to give an honest
technical reason to my manager about why we should
consider using Process Integrator.
Thanks again!
Hugo
408-861-5292
marchFIRST
Cupertino, CA 95014 -
Business Process & Integration between FI and CML
Hi,
Could you please brief about Business Process & Integration between FI and CML.
Thanks in advance
PrabhakarAny Inputs please for CML
-
Solman HP- ALM Integration and Business Process Configuration
Hello Solman Experts,
Can anyone provide me the links/docs/materials/SAP application Help/Wiki etc for Solution Manager to
HP-ALM Integration and Business Process Mapping/Configuration.
Thank you in advance and waiting for the answers.
Regards,
EswaranHi
check below blog for this
End to End testing with HP ALM 11 and SAP Solution Manager 7.1
thanks
Prakhar -
Difference between Process integration scenario and configuration scenario.
Hi,
Please tell me what is difference between Process integration scenarion and configuration scenarion in SAP PI.
Is Process integration scenario is BPM concept? also what is the advantages over configuration scenario.
Regards,
ManigandanHi Manigandan,
Speaking widely:
Process integration scenario: there is a ccBPM, like the workflow in ABAP, even when you one inside the PI it's generated a workflow in the ABAP stuck
Configuration scenario: it is object to link the integration directory and the esr/IR when you define the logic of your implementation. It isnt mandatory, but you can organize better you develoments if you make an scenario for a "real scenario" like a file to soap integration, you can define it like a configuration scenario.
Regards. -
Process Manager and Integration on AIX
Hello,
We have installed an Application Server 10.1.2.0.2 on AIX, but without Process Manager and Integration. On Metalink it is specified that these products are not Certified but still present on any platform on the Application Server 10.1.2.0.2. On OTN it is said it is 'Projected' and available for windows, linux and Sun.
Could anyone tell me if this will be soon available for AIX? Or is there another way to get these installation files? Is it also possible to use an early version of Process Manager and Integration on the Application Server 10.1.2.0.2?
Gr.
PatrickBPEL PM 10.1.2.0.2 is available on AIX.
-
Assigning a node value from an XML variable to a String type in Weblogic Process Integrator
Hi,
Is there any way to assign a node value from an XML variable to a String variable
in Weblogic Process Integrator...
Thanx.
Narendra.Nerendra
Are you talking about using Xpath on the XML document and assigning to a
variable, it is unclear what you are asking
Tony
"Narendra" <[email protected]> wrote in message
news:3bba1215$[email protected]..
>
Hi,
Is there any way to assign a node value from an XML variable to a Stringvariable
in Weblogic Process Integrator...
Thanx.
Narendra. -
Unit testing, integration and functional testing
Hello all,
I would like to know the difference between Unit testing, integration and functional testing. And also what are the testing tools that are more commonly used?
Thanks,
MaxxHi,
Unit testing :
A complete cycle of each module will be tested
ie for PP Right from requirements to planned orders /production orders
confirmation .
Integration testing:
Here cross module testing will be carried out.
ie PP and MM integration
After confirming production order a GR is made /billing is carried out
and delivered.
Functional testing:
This testing is carried out to see whether the system can with stand l the loads during processing by users.
Stress test and volume test.
Regards,
nandha
Maybe you are looking for
-
After Effects Unresponsive. Project from Mac to PC
Hey guys.. I've been using the Element 3d plugin quite a bit lately, but it wasn't running correctly on my system because I was using a custom built "hackintosh" (an error with the video driver, or lack thereof). So I decided to give Windows a try. I
-
Mapping issue with mapWithDefault
Well i am a liitle confused: i have following mapping for target field: /MT_NC_ART_edit/ARTRecordSet/ARTDetailsStruct/sAfoBez=replaceString(oneToMany(concat([delimeter=]/ZBC14_ARTIKEL/IDOC/ZBC14_ARTIKEL/ZBC14_ARTIKEL_VORNR/SAFOBEZ=, const([value=:]))
-
MESSAGE_TYPE_X in POS Retail
Hi, I'm facing a short dump error is POS DM. When I read data from the remote cube using LISTCUBE / RSA3 (checking the datasource), I'm getting MESSAGE_TYPE_X error in the following line, this is due to the SY-SUBRC NE 0. If NOT SY-SUBRC IS INI
-
ABAP Code for loading the flat files kept at FTP locations
Hi all, I need to automate the process of data loading via flat files with the help of process chains , with respect to which I require following help: 1. what steps should I follow to load the data with respect that whenever the new file comes in th
-
Same batch number for different order materials
Hi, pls advise can we assign same batch no's for different production order finished products?