Process management color (urgent!!!!)

hi all!
when i used the process management control , i am confused that all cells are red ,who can tell me why the cells are not green or yellow?
and what the colors means ?
thank you very much !!!!

Hi,
Following from HFM user guide might be useful
Using Cell Colors in Data Grids to Determine Status
Cell colors in data grids indicate additional information about the data. The following table shows the default cell colors in data grids:
Off-white This is an input cell. You can enter or edit data manually.
Light green Allows allocations/derived data.
Medium green This cell is read-only.
Dark green This cell has no write or read access/derived data.
Red Invalid intersection of dimension members. You cannot enter data in invalid cells.
Yellow Yellow indicates one of these conditions:
Data in the cells has been modified but has not yet been saved.
The input status is OK, but the status of the adjustment is not OK (CH, CN or TRN). If the status is CN for node level adjustments, you must run Force Calculate Contribution to clear up the adjustment member status.
Gray This cell contains locked/derived data.
Blue This is a header cell.
Black This is the active cell
This applies to Data grid but I don't think there may be any issue as far as colour RED,, Dark Green are concerned.
Rgds
Payous999

Similar Messages

CS6: Can't switch off color management in the printerdriver when photoshop manages colors

So this is weird: I'm using CS6 Extended and Lightroom 5 on a Windows 7 Pro machine, printing to an old Canon Pixma Ip5200R. When i print from Lightroom, i am using a special printer profile for the pixma and my photopaper, so color management is switched off in the printer driver. The photos print fine.
Now when i print the same photo from CS6, it has a magenta color cast, so clearly something is wrong with the color management. Even though i am using the same printer, the same paper, the same printer profile and - of course! - had set photoshop to manage the colors, and switched color managent off in the printer driver. The magenta cast could be an indication that the photo is double colormanaged.
It took my quite a while to find out what happens, and this is really weird: When i re-checked the printer driver settings, i noticed that the color management settings did not stick. The canon printer driver offers the options "driver matching" "windows ICM" "none", e.g. having color management done by the printer driver or windows, or switch color management off. So when i go to the PS print settings and set it to "photoshop manages colors", add the correct printer profile, i have to check the settings in the printer driver and make sure that color management is set to "none". I set it to "none" and click OK. Now everything should be configured correctly. But it's not - because when i re-check the print driver settings, i see color management is set to "diver matching". I can go to the print driver settings again and agian, but whenever i check, color management is set to "driver matching". This setting simply does not stick. No wonder i get a mangenta cast on my prints, the colors are doublemanaged by photoshop AND my printer driver.
Now, this is getting weirder: Only the color management settings don't stick. I can change other settings like print quality and the stick.
But - how do i get rid of this? The culprit seems to be photoshop, not the printer driver. If i print from lightroom, i can change the color management settings in the (very same) printer driver and they stick. When i set the photoshop print dialogue to "printer manages colors" i can change the color management settings in the (very same) printer driver - and they stick! So this looks as if photoshop stops me intentionally from using the correct printer driver settings, that is from switching off the printer drivers color management if it is set to manage colors.
I have already resetted my personal photoshop preferences, but this changed nothing. What am i missing? What is going wrong? Your help is very appreciated.
Tobias

Hi all, Just to let you know that I finally solved my problem myself.
Essentially what had occurred was that I had updated my Epson driver for my printer , but it hadn't installed, despite informing me that it had! To cut a long story short when I checked in System preferences the older driver for Leopard O/S was still the current driver. I proceeded to ask Epson support for assistance, bu despite their efforts I could not immediately resolve the problem. They were directing me to my Utilities program to remove all traces of my current driver from Printer Utility which did not exist. When I queried this they stated it was not always visible and I should proceed to the next step then install the new driver. Problem was they required me to access this invisible utility in order to complete this process, and yes before you ask I had informed them I was using an Intel Mac with Snow Leopard 10.6.2 O/S. Finally I ignored their advice and took the following steps:
1. I opened System Preferences and double clicked the Printer & Fax icon.
2. I highlighted my Epson R2400 Pinter and removed it by clicking the minus sign at the bottom of the Printers window.
3. Next I did a search and deleted any old drivers for my R2400 that were on my system with the exception of the new Driver.
4. I restarted my Mac Pro.
5. I reinstalled my new printer driver which I had previously downloaded from Epson Support.
6. I restarted my Mac Pro and found that the new driver had installed correctly and full functionality had been returned to the Print Features Dialogue box i.e I could now turn of color management and access advanced features to set the quality of printing using the full spec of the R2400.
Hope this post will be helpful to others if they have a similar problem
Regards Denis
Message was edited by: Denisimo
Message was edited by: Denisimo

Printing from CS5, Photoshop Manages Colors

I only do photo quality prints to Epson matte a few times a year so I run test prints with various settings to get what I want. My granddaughters wanted some prints from a web site framed and my wife wanted prints of an emailed photo of their old mountain cabin. I had to do some color manipulation of the cabin, but the web site images had been expertly processed and all I had to do was print properly. I experimented with the cabin image print settings. Epson changed the names of all their papers, so the Epson print profiles in the print dialog didn't match the name on the matte paper box. I deciphered that, but I wasn't happy with the result so I tried two of the other Epson profiles and hated it. There's quite a long list of profiles available, some specific, and some just conventional color spaces like sRGB, aRGB. For the heck of it I tried Pro Photo RGB as a printer to paper profile. The print of the cabinimage with an embedded aRGB profile was everything I could want. I did the web site sRGB images the samwe way and they were really nice.
The puzzle is this: What does using Pro Photo RGB as an instruction to the printer cocerning what it is printing to thru Photoshop even mean? The printer has never heard of the colors possible in Pro Photo, and the source image is in sRGB ( verified by Photoshop). I can conceive that an RAW image should be rendered as aRGB for inkjet and that the inkjet has some blues that are outside the aRGB, but I can't understand telling an inkjet to use Pro Photo to print sRGB.
Maybe gator soup knows what I'm trying to get at.

you have a choice of Color Sync or Epson (on a Mac
in the "Photoshop Manages Colors" work flow, you shouldn't be concerning yourself with ColorSync (or Epson controls)
you do have Adobe (ACE) set as the Conversion Options: Engine (in Ps Edit> Color Settings> More Options> Conversion Options )?
but let me go over the basic framework of this workflow in CS5:
it may be a wise move to delete your printer from Print & Fax and add it back (as well as updating to the latest driver)
1) Open a copy of WhackedRGB PDI test image in Photoshop
USE THE EMBEDDED PROFILE (do not convert)
confirm the "Document Profile" in the lower-left corner of Ps window
2) File> Print will pull up this window (below)
DOCUMENT PROFILE is WhackedRGB.icc
PRINTER PROFILE is your specific printer/paper/ink ICC profile
RENDERING INTENT (try Perceptual)
BLACK POINT COMPENSATION (try checking this)
if you are using CS6 be sure to uncheck 16-bit color
3) click on Printer Settings... and Printer Settings> Basic to pull up the following screenshot
Media Type is the "type" of paper surface (not an ICC profile)
Color Mode: Off (No Color Management) should be grayed (using Photoshop Manages Colors)
AT THIS POINT HITTING SAVE> PRINT is the correct move to start the printing
you don't need to monkey around the other areas under this basic tutorial
if you want to look at Advanced Color Settings to verify driver color management is "off" (for all practical purposes) -- click on Color Settings and confirm:
here is a more complete EPSON CS5 PRINTING TUTORIAL using an older version of the Epson 7880 print driver
here is a more complete EPSON CS6 PRINTING TUTORIAL
i hope this helps...

Error : Oracle BPEL Process Manager Full Cycle

{color:#3366ff}Hi,
I tried to deploy the UnitedLoan sample demo on to the BPEL server, I ran devprompt.sh to set the environment path and changed the oc4jadmin password in properties file, and when I tried to open the BPEL console I am getting the following error.
Appreciate your inputs.
Regards,
Chandra
{color}<strong>{color:#3366ff}{color:#3366ff}ERROR DESCRIPTION is as follows,{color}
{color}</strong>
Oracle BPEL Process Manager Full Cycle
An unexpected error has occurred while executing your request. This is most likely related to a defect in the Oracle BPEL Process Manager product. We apologize you can post the error to the OTN forum and we will get back to you as soon as possible.
Attachments:
Build Information:
Oracle BPEL Server version 10.1.3.1.0
Build: 0
Build time: Mon Oct 09 08:44:49 PDT 2006
Build type: release
Source tag: PCBPEL_10.1.3.1.0_GENERIC_061009.0802
Exception Message:
[javax.servlet.ServletException]
Timed out waiting for process load lock.
Failed to obtain load lock for process "UnitedLoan-1.0"; timed out after 60 seconds.
Exception Trace:
javax.servlet.ServletException: Timed out waiting for process load lock.
Failed to obtain load lock for process "UnitedLoan-1.0"; timed out after 60 seconds.
at com.evermind.server.http.EvermindPageContext.handlePageThrowable(EvermindPageContext.java:809)
at com.evermind.server.http.EvermindPageContext.handlePageException(EvermindPageContext.java:756)
at ngDeployedProcesses.jspService(_ngDeployedProcesses.java:213)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:453)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:591)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:515)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.unprivileged_include(ServletRequestDispatcher.java:160)
at com.evermind.server.http.ServletRequestDispatcher.access$000(ServletRequestDispatcher.java:50)
at com.evermind.server.http.ServletRequestDispatcher$1.oc4jRun(ServletRequestDispatcher.java:97)
at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
at com.evermind.server.http.ServletRequestDispatcher.include(ServletRequestDispatcher.java:102)
at com.evermind.server.http.EvermindPageContext.include(EvermindPageContext.java:396)
at index.jspService(_index.java:104)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:453)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:591)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:515)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:50)
at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
at com.collaxa.cube.fe.DomainFilter.doFilter(DomainFilter.java:131)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:619)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595

..hi.did u fix it or went for re-install..we got similar error...and found that some jar files are found at more than one classpath directories ...we moved them out..e.g., common-logging???.jar...we removed and it worked just fine...give it a try...

I have lost the photoshop manages color option from my print menu in CS6.

I have lost the photoshop manages color option from my print menu in CS6. It now has colorsync manages color as an option along with printer manages color. I don't know how to reverse this and I can no longer use my printer with any assurance of accurate color.
What could have caused this & how do I reverse it?

Assuming you have not gone to a newer version of WORD and it is just an update issue, then you should be able to go to the addins in the options of word and enable Acrobat. Sometimes the updates of WORD seem to disable the plugin. Note that the plugin is PDF Maker and shows up in the save as menu as well as an Adobe menu item in WORD. The printer is a separate process and does no require activation.
A repair of Acrobat may also solve the problem.

SSL in BPEL PROCESS Manager 10.1.3.1

Hi,
How to set the SSL configuration in BPEL process manager? ( Oracle AS Middle tier version).
BPEL version is 10.1.3.1. This is quite urgent.
Kinldy hellp me out.
Regards,
Latha

Hi,
I followed the same documentaion only. but still it is not working.
i created the wallet like
1) c:\oracle\oas_mf>orapki wallet create -wallet c:\ssl\oas_mf -pwd **** -auto_login
2) c:\oracle\oas_mf>orapki wallet add -wallet c:\ssl\oas_mf -dn "CN=vmwpc138,OU=Middleware Team,O=AAA SA,L=Nylon, C=CH"
- keysize 1024 -self_signed -validity 365 -pwd ***
Succesfully wallet created. But if i use https port, it is not working.
like
https://vm143:443/em
https://vm143:443/BPELAdmin.
Is there any other configuration missed out?
Regards,
Latha

BPEL Process Manager Oracle BPEL Domain Initialization Failed

I was able to login into BPEL Process Manager without any error. Then I changed one entry in the oc4j-ra.xml file and restarted the BPEL server and started getting the error message.
Oracle BPEL Domain Initialization Failed
The Oracle BPEL Domain default did not initialize successfully. The following error was detected during startup. Please contact the Oracle Support
Team if you are not able to resolve this problem.
Reported Error:
Cannot lookup jdbc datasource.
The process domain was unable to lookup the TX datasource "eis/DB/DBConnection1".
Please check that the machine hosting the datasource is physically connected to the network. Additionally check that the
connection pool properties as defined in the application server startup
properties are valid.
I put back the original oc4j-ra.xml back in appropriate dir , restarted the BPEL server and database server still getting the same errro message listed above, It's urgent can anybody post the possible solution/suggestion experience.
Thanks

I opened the file under
./application-deployments/default/DbAdapter/oc4j-ra.xml and it has the following entry
<connector-factory location="eis/DB/DBConnection1" connector-name="Database Adapter">
<config-property name="xADataSourceName" value="jdbc/DBConnection1DataSource"/>
<config-property name="dataSourceName" value="loc/DBConnection1DataSource"/>
<config-property name="platformClassName" value="oracle.toplink.platform.database.Oracle9Platform"/>
<config-property name="usesNativeSequencing" value="true"/>
<config-property name="sequencePreallocationSize" value="50"/>
<config-property name="defaultNChar" value="false"/>
<config-property name="usesBatchWriting" value="true"/>
<connection-pooling use="none">
</connection-pooling>
<security-config use="none">
</security-config>
</connector-factory>
I opened that file (
./connectors/DbAdapter/DbAdapter/META-INF/oc4j-ra.xml) and it has no entry for
<connector-factory location="eis/DB/DBConnection1" connector-name="Database Adapter">
<config-property name="xADataSourceName" value="jdbc/DBConnection1DataSource"/>
<config-property name="dataSourceName" value="loc/DBConnection1DataSource"/>
<config-property name="platformClassName" value="oracle.toplink.platform.database.Oracle9Platform"/>
<config-property name="usesNativeSequencing" value="true"/>
<config-property name="sequencePreallocationSize" value="50"/>
<config-property name="defaultNChar" value="false"/>
<config-property name="usesBatchWriting" value="true"/>
<connection-pooling use="none">
</connection-pooling>
<security-config use="none">
</security-config>
</connector-factory>
So I entered this and restarted the BPEL PM but still no luck,
Is anything else I will be looking in that file let me know

How to configure Oracle BPEL Process Manager for JBoss 4.2.1

can any body help me to configure Oracle BPEL Process Manager for JBoss 4.2.1

Look here:
http://download.oracle.com/docs/cd/E10291_01/doc.1013/e10538/toc.htm
Marc
http://orasoa.blogspot.com

Unable to start Oracle Process Manager from the windows services for OBIEE

Hi,
I have OBIEE 11g installed on a 32-bit windows machine. Of the two windows services installed, I am unable to start the Oracle Process Manager. When I try to start it I get the following error:
Error 1053: The service did not respond to the start or control request in a timely fashion.
At the back end, this service is calling the file opmn.exe which is placed at MIDDLEWAREHOME\Oracle_BI1\opmn\bin. On trying to execute this file the error we get is:
The procedure entry point longjmp could not be located in the dynamic link library orauts.dll
I have tried replacing the orauts.dll file, but to no avail.
Please let me know if you have any clue regarding what is to be done.
Thanks
Naman

Hi Naman,
This error occurs for the following reasons,
*Path variable is not set properly
*Multiple Oracle homes exists in the same machine.
Follow the below steps and let me know if it works,
1. Select My Computer -> Right Click -> Properties
2. In the System Properties screen go to Advanced Tab
3. Click on Environment Variables
4. In the System Variables section select PATH variable & Click edit
5. Now you will find that it will contain invalid directories. Remove the incorrect entries. This may happen when you have multiple oracle homes in the same machine
6. Restart the service.
Rgds,
Dpka

BPEL Process Manager Generated WSDL

We are working on an ant build framework for a Oracle SOA Suite 10.1.3.3.0 project, consisting of a main BPEL process that is synchronously calling another BPEL process via an ESB. This second process uses the same ESB to call back the original process.
This of course leads to a circular deployment dependency, where the ESB requires both BPEL WSDLs before it can be deployed, and each BPEL process needs a WSDL for the ESB endpoint to be deployed.
We are attempting to short circuit this dependency by deploying a web application registry for the WSDLs in question, but this presents us with a further problem. The WSDLs used to communicate with the BPEL processes and ESB are not the project WSDLs, but appear to actually be describing web service wrappers generated on the application server side. In order to use the proposed web registry, we would need to be able to predictably generate these WSDLs (or at least representative versions).
In our example it looks like a case of generating binding and service elements and merging them with the BPEL project WSDL , but we do not feel that it is safe to assume anything about this behaviour and would prefer some kind of documentation to inform our decision.
So, a couple of questions:
1) Can anyone provide documentation and/or description of how the required web service endpoints are generated by the application server/BPEL process manager?
2) Alternatively, is there a better way of avoiding or dealing with the aforementioned circular dependency?
Thankyou

I was wondering too what would be a could solution for the "circular dependency" situation.
In my current project we will build some mockup-bpels(just for the interface) for the time being.

Problem to start BPEL Console of Oracle BPEL Process Manager 10.1.3.1.0

Hi everyone!
I'm writing to yours because I installed Oracle BPEL Process Manager 10.1.3.1.0 but I can't start BPEL Console. I tried to start it by the option menu of Windows XP and by Developer Prompt, but I get a HTTP 404 Not Found page. When I was installing the universall installer told me that it wasn't possible to set ORACLE_HOME variable because it had a value older than 1023 characteres. So, I continue the installation but I can't start the BPEL Console. The Dos Console teld me sometimes when I put http://localhost:9700/BPELConsole..timed out. So, tell me how to resolve that problem.
I'll be waiting your responses.
This is the log of "Select Start BPEL PM Server",
Could not canonicalize 'ERROR: product bean SAWebBinCompBean does not exist' (Th
e filename, directory name, or volume label syntax is incorrect). From system pr
operty java.library.path.
Could not canonicalize 'ERROR: product bean EclipseSACatalogMangerCompBean does
not exist' (The filename, directory name, or volume label syntax is incorrect).
From system property java.library.path.
Could not canonicalize 'ERROR: product bean SQLAnywhereOdbcDriverCompBean does n
ot exist' (The filename, directory name, or volume label syntax is incorrect). F
rom system property java.library.path.
Could not canonicalize 'ERROR: product bean DWSharedUtilityCompBean does not exi
st' (The filename, directory name, or volume label syntax is incorrect). From sy
stem property java.library.path.
Jul 15, 2007 12:48:36 PM com.evermind.server.XMLDataSourcesConfig parseRootNode
INFO: Legacy datasource detected...attempting to convert to new syntax.
2007-07-15 12:48:45.378 NOTIFICATION JMSServer[]: OC4J JMS server recovering tra
nsactions (commit 0) (rollback 0) (prepared 0).
2007-07-15 12:48:45.408 NOTIFICATION JMSServer[]: OC4J JMS server recovering loc
al transactions Queue[OC4J Domain Queue].
2007-07-15 12:48:45.448 NOTIFICATION JMSServer[]: OC4J JMS server recovering loc
al transactions Queue[jms/Oc4jJmsExceptionQueue].
2007-07-15 12:48:45.628 NOTIFICATION JMSServer[]: OC4J JMS server recovering loc
al transactions Queue[jms/notifications].
2007-07-15 12:48:45.649 NOTIFICATION JMSServer[]: OC4J JMS server recovering loc
al transactions Queue[OracleASRouter_store].
2007-07-15 12:48:45.959 NOTIFICATION JMSServer[]: OC4J JMS server recovering loc
al transactions Queue[jms/events].
2007-07-15 12:48:46.049 NOTIFICATION JMSServer[]: OC4J JMS server recovering loc
al transactions Queue[jms/jobstore].
2007-07-15 12:48:46.149 ERROR Failed to set the internal configuration of the OC
4J JMS Server with: XMLJMSServerConfig[file:/C:/product/10.1.3.1/OraBPEL_1/bpel/
system/appserver/oc4j/j2ee/home/config/jms.xml]
07/07/15 12:48:46 *** (SEVERE) Failed to set the internal configuration of the O
C4J JMS Server with: XMLJMSServerConfig[file:/C:/product/10.1.3.1/OraBPEL_1/bpel
/system/appserver/oc4j/j2ee/home/config/jms.xml]
2007-07-15 12:48:46.149 ERROR J2EE OJR-00011 Exception starting JMS server: Fail
ed to set the internal configuration of the OC4J JMS Server with: XMLJMSServerCo
nfig[file:/C:/product/10.1.3.1/OraBPEL_1/bpel/system/appserver/oc4j/j2ee/home/co
nfig/jms.xml]
2007-07-15 12:49:29.952 WARNING J2EE JNDI-00002 Resource reference jms/Queue/Not
ificationSenderQueueConnectionFactory not found. Allowing J2EEContext creation
to continue anyway.
2007-07-15 12:49:29.962 WARNING J2EE JNDI-00004 No javax.jms.QueueConnectionFact
ory found at jms/QueueConnectionFactory
2007-07-15 12:49:29.962 WARNING J2EE JNDI-00002 Resource reference jms/Queue/Not
ificationSenderQueue not found. Allowing J2EEContext creation to continue anywa
y.
2007-07-15 12:49:29.962 WARNING J2EE JNDI-00004 No javax.jms.Queue found at null
2007-07-15 12:49:29.962 WARNING J2EE JNDI-00002 Resource reference jms/Queue/Not
ificationSenderQueueConnectionFactory not found. Allowing J2EEContext creation
to continue anyway.
2007-07-15 12:49:29.972 WARNING J2EE JNDI-00004 No javax.jms.QueueConnectionFact
ory found at jms/QueueConnectionFactory
2007-07-15 12:49:29.982 WARNING J2EE JNDI-00002 Resource reference jms/Queue/Not
ificationSenderQueue not found. Allowing J2EEContext creation to continue anywa
y.
2007-07-15 12:49:29.982 WARNING J2EE JNDI-00004 No javax.jms.Queue found at null
2007-07-15 12:49:30.112 ERROR J2EE EJB-03027 [orabpel] An error occured deployin
g EJB module: java.lang.InstantiationException: Resource exception(BPELjms) for
MessageDrivenBean InvokerBean during endpoint activation: failure looking up res
ource provider factory for QueueConnectionFactoryWrapper [Queue]-OracleASJMSConn
ector.QueueConnectionFactoryWrapper.Demos7.-3f9cb723:113ca91421c:-7fff.22 []: ja
vax.resource.spi.ResourceAdapterInternalException: Looking up java:comp/resource
/oc4jjms/jms/collaxa/BPELInvokerQueueFactory: javax.naming.NameNotFoundException
: No resource named 'oc4jjms/jms/collaxa/BPELInvokerQueueFactory'found
07/07/15 12:49:30 WARNING: Application.setConfig Application: orabpel is in fail
ed state as initialization failed.
java.lang.InstantiationException: Error initializing ejb-modules: Resource excep
tion(BPELjms) for MessageDrivenBean InvokerBean during endpoint activation: fail
ure looking up resource provider factory for QueueConnectionFactoryWrapper [Queu
e]-OracleASJMSConnector.QueueConnectionFactoryWrapper.Demos7.-3f9cb723:113ca9142
1c:-7fff.22 []: javax.resource.spi.ResourceAdapterInternalException: Looking up
java:comp/resource/oc4jjms/jms/collaxa/BPELInvokerQueueFactory: javax.naming.Nam
eNotFoundException: No resource named 'oc4jjms/jms/collaxa/BPELInvokerQueueFacto
ry'found
2007-07-15 12:49:30.513 WARNING DEBUG GJRA-1100, oracle.j2ee.connector.messagein
flow.MessageEndpointFactoryImpl@121c5df.
2007-07-15 12:49:30.763 WARNING J2EE OJR-00013 Exception initializing deployed a
pplication: orabpel. Application: orabpel is in failed state as initialization f
ailed
2007-07-15 12:49:31.374 ERROR J2EE EJB-03027 [hw_services] An error occured depl
oying EJB module: com.evermind.server.ejb.deployment.InvalidEJBAssemblyException
: [hw_services:hw_services_ejb:RemoteWorklistService] - Unable to load ejb-class
oracle.tip.pc.services.hw.worklist.RemoteWorklistServiceBean, see section 23.2
of the EJB 2.1 specificationoracle.classloader.util.AnnotatedClassNotFoundExcept
ion:
Missing class: oracle.tip.pc.services.hw.worklist.RemoteWorklistServic
eBean
Dependent class: com.evermind.server.ejb.deployment.BeanDescriptor
Loader: oc4j:10.1.3
Code-Source: /C:/product/10.1.3.1/OraBPEL_1/bpel/system/appserver/oc
4j/j2ee/home/lib/oc4j-internal.jar
Configuration: <code-source> in META-INF/boot.xml in C:\product\10.1.3
.1\OraBPEL_1\bpel\system\appserver\oc4j\j2ee\home\oc4j.jar
This load was initiated at hw_services.root:0.0.0 using the Class.forName() meth
od.
The missing class is available from the following locations:
1. Code-Source: /C:/product/10.1.3.1/OraBPEL_1/bpel/system/services/lib/
bpm-services.jar (from <code-source> in /C:/product/10.1.3.1/OraBPEL_1/bpel/syst
em/appserver/oc4j/j2ee/home/config/server.xml)
This code-source is available in loader oracle.bpel.common:10.1.3. Th
is shared-library can be imported by the "hw_services" application.
07/07/15 12:49:31 WARNING: Application.setConfig Application: hw_services is in
failed state as initialization failed.
java.lang.InstantiationException: Error initializing ejb-modules: [hw_services:h
w_services_ejb:RemoteWorklistService] - Unable to load ejb-class oracle.tip.pc.s
ervices.hw.worklist.RemoteWorklistServiceBean, see section 23.2 of the EJB 2.1 s
pecificationoracle.classloader.util.AnnotatedClassNotFoundException:
Missing class: oracle.tip.pc.services.hw.worklist.RemoteWorklistServic
eBean
Dependent class: com.evermind.server.ejb.deployment.BeanDescriptor
Loader: oc4j:10.1.3
Code-Source: /C:/product/10.1.3.1/OraBPEL_1/bpel/system/appserver/oc
4j/j2ee/home/lib/oc4j-internal.jar
Configuration: <code-source> in META-INF/boot.xml in C:\product\10.1.3
.1\OraBPEL_1\bpel\system\appserver\oc4j\j2ee\home\oc4j.jar
This load was initiated at hw_services.root:0.0.0 using the Class.forName() meth
od.
The missing class is available from the following locations:
1. Code-Source: /C:/product/10.1.3.1/OraBPEL_1/bpel/system/services/lib/
bpm-services.jar (from <code-source> in /C:/product/10.1.3.1/OraBPEL_1/bpel/syst
em/appserver/oc4j/j2ee/home/config/server.xml)
This code-source is available in loader oracle.bpel.common:10.1.3. Th
is shared-library can be imported by the "hw_services" application.
2007-07-15 12:49:31.394 WARNING J2EE OJR-00013 Exception initializing deployed a
pplication: hw_services. Application: hw_services is in failed state as initiali
zation failed
2007-07-15 12:49:31.534 ERROR J2EE EJB-03027 [owf] An error occured deploying EJ
B module: com.evermind.server.ejb.deployment.InvalidEJBAssemblyException: [owf:O
WFWrapperEJB:OWFRemoteWrapper] - Unable to load ejb-class oracle.tip.pc.services
.owf.OWFRemoteWrapperBean, see section 23.2 of the EJB 2.1 specificationoracle.c
lassloader.util.AnnotatedClassNotFoundException:
Missing class: oracle.tip.pc.services.owf.OWFRemoteWrapperBean
Dependent class: com.evermind.server.ejb.deployment.BeanDescriptor
Loader: oc4j:10.1.3
Code-Source: /C:/product/10.1.3.1/OraBPEL_1/bpel/system/appserver/oc
4j/j2ee/home/lib/oc4j-internal.jar
Configuration: <code-source> in META-INF/boot.xml in C:\product\10.1.3
.1\OraBPEL_1\bpel\system\appserver\oc4j\j2ee\home\oc4j.jar
This load was initiated at owf.root:0.0.0 using the Class.forName() method.
The missing class is available from the following locations:
1. Code-Source: /C:/product/10.1.3.1/OraBPEL_1/bpel/system/services/lib/
bpm-services.jar (from <code-source> in /C:/product/10.1.3.1/OraBPEL_1/bpel/syst
em/appserver/oc4j/j2ee/home/config/server.xml)
This code-source is available in loader oracle.bpel.common:10.1.3. Th
is shared-library can be imported by the "owf" application.
07/07/15 12:49:31 WARNING: Application.setConfig Application: owf is in failed s
tate as initialization failed.
java.lang.InstantiationException: Error initializing ejb-modules: [owf:OWFWrappe
rEJB:OWFRemoteWrapper] - Unable to load ejb-class oracle.tip.pc.services.owf.OWF
RemoteWrapperBean, see section 23.2 of the EJB 2.1 specificationoracle.classload
er.util.AnnotatedClassNotFoundException:
Missing class: oracle.tip.pc.services.owf.OWFRemoteWrapperBean
Dependent class: com.evermind.server.ejb.deployment.BeanDescriptor
Loader: oc4j:10.1.3
Code-Source: /C:/product/10.1.3.1/OraBPEL_1/bpel/system/appserver/oc
4j/j2ee/home/lib/oc4j-internal.jar
Configuration: <code-source> in META-INF/boot.xml in C:\product\10.1.3
.1\OraBPEL_1\bpel\system\appserver\oc4j\j2ee\home\oc4j.jar
This load was initiated at owf.root:0.0.0 using the Class.forName() method.
The missing class is available from the following locations:
1. Code-Source: /C:/product/10.1.3.1/OraBPEL_1/bpel/system/services/lib/
bpm-services.jar (from <code-source> in /C:/product/10.1.3.1/OraBPEL_1/bpel/syst
em/appserver/oc4j/j2ee/home/config/server.xml)
This code-source is available in loader oracle.bpel.common:10.1.3. Th
is shared-library can be imported by the "owf" application.
2007-07-15 12:49:31.544 WARNING J2EE OJR-00013 Exception initializing deployed a
pplication: owf. Application: owf is in failed state as initialization failed
2007-07-15 12:50:07.096 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: admin_war defined in web site OC4J 10g (10.1.3) Defau
lt Web Site. Application: admin_war has been stopped
2007-07-15 12:50:07.096 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: console_war defined in web site OC4J 10g (10.1.3) Def
ault Web Site. Application: console_war has been stopped
2007-07-15 12:50:07.246 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: startup_war defined in web site OC4J 10g (10.1.3) Def
ault Web Site. Application: startup_war has been stopped
2007-07-15 12:50:07.386 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: httpbinding defined in web site OC4J 10g (10.1.3) Def
ault Web Site. Application: httpbinding has been stopped
2007-07-15 12:50:26.003 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: deploy defined in web site OC4J 10g (10.1.3) Default
Web Site. Application: deploy has been stopped
2007-07-15 12:50:26.013 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: testconnection defined in web site OC4J 10g (10.1.3)
Default Web Site. Application: testconnection has been stopped
2007-07-15 12:50:26.023 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: taskservice defined in web site OC4J 10g (10.1.3) Def
ault Web Site. Application: taskservice has been stopped
2007-07-15 12:50:26.033 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: taskmetadataservice defined in web site OC4J 10g (10.
1.3) Default Web Site. Application: taskmetadataservice has been stopped
2007-07-15 12:50:26.033 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: taskqueryservice defined in web site OC4J 10g (10.1.3
) Default Web Site. Application: taskqueryservice has been stopped
2007-07-15 12:50:26.033 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: IdentityService defined in web site OC4J 10g (10.1.3)
Default Web Site. Application: IdentityService has been stopped
2007-07-15 12:50:26.033 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: usermetadataservice defined in web site OC4J 10g (10.
1.3) Default Web Site. Application: usermetadataservice has been stopped
2007-07-15 12:50:26.043 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: runtimeconfigservice defined in web site OC4J 10g (10
.1.3) Default Web Site. Application: runtimeconfigservice has been stopped
2007-07-15 12:50:26.043 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: hw_services defined in web site OC4J 10g (10.1.3) Def
ault Web Site. Application: hw_services has been stopped
2007-07-15 12:50:26.043 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: worklistxpress defined in web site OC4J 10g (10.1.3)
Default Web Site. Application: worklistxpress has been stopped
2007-07-15 12:50:26.043 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: worklistapp defined in web site OC4J 10g (10.1.3) Def
ault Web Site. Application: worklistapp has been stopped
2007-07-15 12:50:26.043 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: owf defined in web site OC4J 10g (10.1.3) Default Web
Site. Application: owf has been stopped
07/07/15 12:50:36 Oracle Containers for J2EE 10g (10.1.3.1.0) initialized
Thanks for your responses.
Greetings.

Hi,
you said:
it wasn't possible to set ORACLE_HOME variable because it had a value older than 1023 characteres
What do you mean with older than 1023 chars?
I think the easiest way is to uninstall the BPEL Console and run the installer again with correcting the ORACLE_HOME problem...

Problem installing BPEL Process Manager 10.1.3.1.0

Hi,
I'm new to BPEL. I downloaded BPEL Process Manager 10.1.3.1.0 for OC4J for Windows. After the download while doing the Oracle Universal Installer I selected "BPEL Process Manager for OracleAS Middle Tier"
I get the following error:
BPEL Process Manager for OracleAS Middle Tier will run on top of a supported Oracle Applications Server 10.1.3.0 J2EE Server and Web Server OR J2EE Server instance. This location does not contain this instance. Please refer to the Installation Guide for supported versions. Please select a new Oracle Home that contains a supported instance.
Can anyone please let me know what could be the issue.
Thanks
-Prapoorna

Hi,
I'm new to BPEL. I downloaded BPEL Process Manager
10.1.3.1.0 for OC4J for Windows. After the download
while doing the Oracle Universal Installer I selected
"BPEL Process Manager for OracleAS Middle Tier" You would select the above installation option only if you already have an OracleAS Middle Tier - and it would then install BPEL PM into the same ORACLE_HOME.
The below error message is telling you the same. You have one of two options:
1. install Oracle AS midtier first and then redo the above install of the BPEL PM
2. select the standalone option (not the midtier option)
HTH
>
I get the following error:
BPEL Process Manager for OracleAS Middle Tier will
run on top of a supported Oracle Applications Server
10.1.3.0 J2EE Server and Web Server OR J2EE Server
instance. This location does not contain this
instance. Please refer to the Installation Guide for
supported versions. Please select a new Oracle Home
that contains a supported instance.
Can anyone please let me know what could be the
issue.
Thanks
-Prapoorna

Help needed in oracle 11g soa suite.........(BPEL Process manager)

we tried to download bpel process manager 11g but as per oracle it is under Oracle Fusion Middleware 11gR1 so we have downloaded the same also.....*
but the problem is agter installation we are not getting anuthing called oracle bpel process manager and also we are not able to run soa suite..........*
Can you please suggest how we can install the same or is there any other way so that we can run bpel process manager.*

Hi,
Download SOA 11.1.1.2.0 from OTN.
1. Don't forget to download RCU (Repository Configuration Utility). It is an extractable zip folder. Extract it. Navigate to its bin folder. Invoke rcu.sh/rcu.bat. It will open RCU. Choose Create. Enter your db details. In the next screen, choose SOA Infrastructure schema. Provide a schema prefix. Default would be 'DEV'. Proceed with further steps.
2. After installing 11gR1, navigate to your $ORACLE_HOME/common/bin
Invoke config.sh/config.cmd based on your OS. This will open the configuration wizard.
Choose create domain option. Enter the domain name. Select the templates: SOA Suite and Enterprise Manager. In the JDBC Datasources screen, enter the SOA schema information, db details. Complete the wizard. No need to customize anything else. This will create a SOA Domain.
3. Run the setNMProps.sh/cmd from $MW_HOME/oracle_common/common/bin folder.
4. Navigate to $MW_HOME/wlserver_10.3/server/bin. Execute startNodeManager.sh/cmd. This will start the node manager.
5. Now navigate to your $DOMAIN_HOME. You will be able to find startWeblogic.cmd/sh file. Execute it. This will start your Admin Server.
6. Once the server started, login to WLS Admin Console (http://host:7001/console). Navigate to Servers. Click on Control tab. Select soa_server1. Start the server.
This will start the SOA server. To test your soa is up, access the url http://host:8001/soa-infra
There is no BPEL Console/ ESB Console / OWSM console in 11g. Everything is managed from your EM. EM url would be http://host:admin_server_port/em (http://host:7001/em)

How to install Oracle BPEL Process Manager for OracleAS Middle Tier

hi,
i need to install BPEL process manager, so i download the following file from otn
1.soa_windows_x86_101310_disk1
2.soa_windows_x86_bpel_101310
here i read the document named b28980.pdf from bpel\doc\pc.1012 to install BPEL PM
so i start to complete the pre-installation task
1.installed Oracle database 10g
2.Run the Integration Repository Creation Assistant on the Database
3.Install Oracle Application Server 10g Release3 (10.1.3.1.0) and select either the J2EE Server installation type or the J2EE and Web Server installation type. selected J2EE and Web Server installation type
and installed according to the Oracle application server installation guide.
installed OracleAS in the path : D:\product\10.1.3.1\OracleAS_1
4.Install the current release of Oracle BPEL Process Manager for OracleAS Middle Tier
here they mention to select the J2EE and Web Server installation type because that type is selected in Oracle AS installed in Oracle Application Server
so i start to install the BPEL PM by selecting the setup.exe-->and shows the location source and destination
default destination is : D:\product\10.1.3.1\OraBPEL_1 selected next on the screen
the next screen is select installation type here there are two types named
1.BPEL process Manager for Developer (371MB)
2.BPEL process manager for Oracle AS Middle tier (107MB)
i selected 2.BPEL process manager for Oracle AS Middle tier (107MB) and click next
pop up window opens with title dependencies
error:
BPEL Process manager for oracle AS Middle tier will run on top of a supported Oracle Application Server 10.1.3.1.0 J2EE server and Web Server Or J2EE server instance. this location does not contain this instance. Please select new Oracle home that contains a supported instance.
so i changed the destination path to : D:\product\10.1.3.1\OracleAS_1\BIN then also i got the same error.
please any one mention the path for J2EE and Web Server instance for installing the BPEL PM for Oracle AS Middle Tier.
Thanks in Advance
Aswath Thaniga

If you choose the developer version you will be fine.
If you have installed J2EE and Web Server installation into D:\product\10.1.3.1\OracleAS_1 then this is the location you install your BPEL PM into, not D:\product\10.1.3.1\OraBPEL_1 or D:\product\10.1.3.1\OracleAS_1\BIN.
D:\product\10.1.3.1\OracleAS_1 is what we call the ORACLE_HOME, generally we create a new home for each install, but in this case there is a dependency on 10.1.3.1 OC4J container. So it needs to be installed into 10.1.3.1 oracle home.
The bin directory is just the executables for that home, its not the actual. home.
cheers
James

11.1.2 Oracle Process Manager - start error

Hi,
i start EPM system batch file, the Oracle Process Manager (EPM_epmsystem1) service did not start, i found this in starter.log.
First time after installation the service went up without any problems.
start:
[starter] oracle.as.management.opmn.optic.OpticException: Error in starting opmn server
[starter] Operation aborted because of a parse error or bad value specified in opmn.xml
[starter]      at oracle.as.management.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:310)
[starter]      at oracle.as.management.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:87)
[starter]      at com.hyperion.cis.ant.starter.OPMNStarter.startAndReloadOpmnCtl(OPMNStarter.java:174)
[starter]      at com.hyperion.cis.ant.starter.OPMNStarter.init(OPMNStarter.java:47)
[starter]      at com.hyperion.cis.ant.starter.StarterEngine.load(StarterEngine.java:129)
[starter]      at com.hyperion.cis.ant.starter.StarterEngine.execute(StarterEngine.java:103)
[starter]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
[starter]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[starter]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[starter]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[starter]      at java.lang.reflect.Method.invoke(Method.java:597)
[starter]      at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
[starter]      at org.apache.tools.ant.Task.perform(Task.java:348)
[starter]      at org.apache.tools.ant.Target.execute(Target.java:357)
[starter]      at org.apache.tools.ant.Target.performTasks(Target.java:385)
[starter]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
[starter]      at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
[starter]      at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
[starter]      at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
[starter]      at org.apache.tools.ant.Main.runBuild(Main.java:698)
[starter]      at org.apache.tools.ant.Main.startAnt(Main.java:199)
[starter]      at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
[starter]      at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
[starter] Components sequence: [[AnalyticProviderServices.properties, BPMS_bpms1_Server.properties, CalcMgr.properties, EIS.properties, EisServer.properties, EpmaDataSync.properties, EpmaWebReports.properties, Essbase.properties, EssbaseAdminServices.properties, FoundationServices.properties, OHS.properties, Planning.properties, ProcessManager.properties, RMI.properties, RaFramework.properties, RaFrameworkAgent.properties, ocm.properties]]
[starter] Starting component: FoundationServices.properties
[starter] Selected starter: com.hyperion.cis.ant.starter.ServiceStarter@193a66f[name=HyS9FoundationServices,checker=com.hyperion.cis.ant.starter.checkers.J2eeChecker@c9131c,engine=<null>,id=<null>,type=<null>,waitFor=true,running=false,timeout=500000,interval=5000,softDependency=[],strongDependency=[],isExecuted=false]
[starter] Start time: Thu May 13 10:01:48 CEST 2010
[starter] End time: Thu May 13 10:03:30 CEST 2010. Delay : 101937ms
[starter] Starting component: AnalyticProviderServices.properties
[starter] Selected starter: com.hyperion.cis.ant.starter.ServiceStarter@1ec8909[name=HyS9aps,checker=com.hyperion.cis.ant.starter.checkers.J2eeChecker@18c56d,engine=<null>,id=<null>,type=<null>,waitFor=true,running=false,timeout=500000,interval=5000,softDependency=[FoundationServices.properties],strongDependency=[],isExecuted=false]
[starter] Start time: Thu May 13 10:03:32 CEST 2010
[starter] End time: Thu May 13 10:05:01 CEST 2010. Delay : 89688ms

Hi,
i start EPM system batch file, the Oracle Process Manager (EPM_epmsystem1) service did not start, i found this in starter.log.
First time after installation the service went up without any problems.
start:
[starter] oracle.as.management.opmn.optic.OpticException: Error in starting opmn server
[starter] Operation aborted because of a parse error or bad value specified in opmn.xml
[starter]      at oracle.as.management.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:310)
[starter]      at oracle.as.management.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:87)
[starter]      at com.hyperion.cis.ant.starter.OPMNStarter.startAndReloadOpmnCtl(OPMNStarter.java:174)
[starter]      at com.hyperion.cis.ant.starter.OPMNStarter.init(OPMNStarter.java:47)
[starter]      at com.hyperion.cis.ant.starter.StarterEngine.load(StarterEngine.java:129)
[starter]      at com.hyperion.cis.ant.starter.StarterEngine.execute(StarterEngine.java:103)
[starter]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
[starter]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[starter]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[starter]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[starter]      at java.lang.reflect.Method.invoke(Method.java:597)
[starter]      at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
[starter]      at org.apache.tools.ant.Task.perform(Task.java:348)
[starter]      at org.apache.tools.ant.Target.execute(Target.java:357)
[starter]      at org.apache.tools.ant.Target.performTasks(Target.java:385)
[starter]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
[starter]      at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
[starter]      at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
[starter]      at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
[starter]      at org.apache.tools.ant.Main.runBuild(Main.java:698)
[starter]      at org.apache.tools.ant.Main.startAnt(Main.java:199)
[starter]      at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
[starter]      at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
[starter] Components sequence: [[AnalyticProviderServices.properties, BPMS_bpms1_Server.properties, CalcMgr.properties, EIS.properties, EisServer.properties, EpmaDataSync.properties, EpmaWebReports.properties, Essbase.properties, EssbaseAdminServices.properties, FoundationServices.properties, OHS.properties, Planning.properties, ProcessManager.properties, RMI.properties, RaFramework.properties, RaFrameworkAgent.properties, ocm.properties]]
[starter] Starting component: FoundationServices.properties
[starter] Selected starter: com.hyperion.cis.ant.starter.ServiceStarter@193a66f[name=HyS9FoundationServices,checker=com.hyperion.cis.ant.starter.checkers.J2eeChecker@c9131c,engine=<null>,id=<null>,type=<null>,waitFor=true,running=false,timeout=500000,interval=5000,softDependency=[],strongDependency=[],isExecuted=false]
[starter] Start time: Thu May 13 10:01:48 CEST 2010
[starter] End time: Thu May 13 10:03:30 CEST 2010. Delay : 101937ms
[starter] Starting component: AnalyticProviderServices.properties
[starter] Selected starter: com.hyperion.cis.ant.starter.ServiceStarter@1ec8909[name=HyS9aps,checker=com.hyperion.cis.ant.starter.checkers.J2eeChecker@18c56d,engine=<null>,id=<null>,type=<null>,waitFor=true,running=false,timeout=500000,interval=5000,softDependency=[FoundationServices.properties],strongDependency=[],isExecuted=false]
[starter] Start time: Thu May 13 10:03:32 CEST 2010
[starter] End time: Thu May 13 10:05:01 CEST 2010. Delay : 89688ms

Process management color (urgent!!!!)

Similar Messages

Maybe you are looking for