Process Manager fails on startup

Hi,
I have installed the infrastructue on a machine and the midtier on an other machine.
The installation went fine but after rebooting the system it get an error
message in the event viewer:
Process manager failed on startup.
I tried to start is manually but it dows not respond at all.
What can I do?
Thanks
Michael

IIRC, Internet Connect is a Tiger and earlier app which is now rolled into Network for Leopard and Snow Leopard. I can't help with the DSL issues since I dropped that over four years ago and have been on cable ever since.

Similar Messages

RE:The OPMN Process Manage failed to start.

Hi everybody,
Can anybody help with following issue below, please?
I just install Oracle unbreakable linux operating system. I am trying to install infrastructure on it. All the time i am get error "The OPMN Process Manager failed to start". I changed the system requirement like it stated to the installation manual. But I am still getting same error.
I will appreciate to one will give me solution for this problem.
Thank,
Arthur

Poa,
The operating system is Red Hat Enterprise version 4 ( 86-64 bits). My computer specifications: Process is Dual core AMD x86 64bits, and RAM is 2GB. I am trying to install Oracle Application Server 10g Release 2 (10.1.2). I checked all the prerequisite before attempting installation.
Thank you,
Arthur

OPMN Process Manager failed to start - libmodapi.so libclntsh.so not found

Hi all,
I am completely new to Oracle in its entirety. I am trying to install Oracle Enterprise Manager Grid Console 10.2.0.1.0 on Oracle Enterprise Linux 5.1 through the OUI using the new database install. When I get to setting up the Oracle Application Server, it tells me the OPMN Process Manager failed to start, tells me to check the logs in /oms10g/opmn/logs, and to start OPMN manually before hitting retry.
The log files in that directory do not seem to contain any errors.
When I run ./opmnctl stopall, ./opmnctl startall, ./opmnctl status, I get no obvious errors, and then the following:
DSA ~ DSA ~ Down
HTTP_Server ~ HTTPServer ~ Alive
LogLoader ~ logloaderd ~ Down
dcm-daemon ~ dcm-daemon ~ Down
OC4J ~ home ~ Alive
WebCache ~ WebCache ~ Alive
WebCache ~ WebCacheAdmin ~ Alive
When I do ./opmn start I get the following:
./opmn: error while loading shared libraries: libmodapi.so: cannot open shared object file: No such file or directory
When I do a ldd ./opmn I get the following errors:
libmodapi.so => not found
libclntsh.so.10.1 => not found
I am assuming my problem is that these two libraries are not linked in. I have looked through the forums, and found closely related threads, but none that seemed to help, most notably changing my PATH. If anyone has any suggestions, I would welcome them. Thanks for your help.
Sincerely,
Don

Hi All,
We all agree that best practice involves a test installation. My original post was about a problem I was having with the creation of my test bed. I did create my own manual, which I am sure is not the best manual ever created, but does work to get the software installed. If it is proven out, I will post it to try and return something to the community.
In order to do this, I needed to read thousands of pages of documentation so far, which does not even scratch the surface of the total amount on OTN. I am still revising my instructions as I find that the documentation commonly assumes the reader has been installing Oracle for some time and is fully aware of all the appropriate acronyms and the entire logical and physical structure of the database. In order to just read many of the documents, I had to draw out a map of Oracle on a whiteboard as I went. As a systems administrator, should I have to search through all those papers, manuals, the web, etc. and try to gain an advanced DBA understanding to get a working default installation? Perhaps it seems like I am just a new user who is whining, but how many programs can you think of where this type of effort is required?
In looking at the relationship between the DBA and the Systems Administrator, where should we draw a line between their tasks?
Should the DBA have to learn how to assess appropriate server hardware, and then install and administrate every flavor of Windows, UNIX, Linux, etc. in any given environment? Should a DBA be required to build a Linux kernel, configure Active Directory, or install Solaris before installing Oracle?
Should the Systems Administrator have to learn the nuances of installing and optimizing Oracle databases in order to just put the base software on the system and configure the kernel so it is ready for a DBA?
More interesting, as stated above, I could hand you the Gentoo Handbook, and without knowing a single thing about Gentoo Linux, you would have a default installation of the Gentoo OS. You could also grab step-by-step instructions for a default installation of MySQL on Gentoo, or a myriad of other programs, for that matter. This would hardly replace the Gentoo systems administrator or MySQL DBA, but it does serve a very valid purpose of enabling the systems administrator and DBA. Shouldn’t Oracle have something similar?
I would think the Systems Administrator knowledgeable in the OS and Kernel should be able to perform the first half of the installation task where they are more likely to be an expert, and then allow the DBA to create and optimize the databases they install, which they in turn can spend years learning how to do. Time that the DBA spends learning the OS or time the Systems Administrator spends learning Oracle is valuable in the long run, but it is also extra time to get the initial database up and running. One of the largest reasons IT personnel exist at all is to keep users from having to spend too much time learning about their computers to get their work done. Shouldn’t this also translate between IT groups?
Databases are one of the few software installations that systems administrators commonly don't have to maintain on corporate servers. The best comparison I know of is web services. In this manner web servers are very similar, and are commonly installed by a team as well. I am perfectly capable of creating a default install of Apache, Tomcat, or IIS from step-by-step instructions provided by Apache or Microsoft without much more tailored information than the IP address and system name we are going to use to fill in the blanks during the installation.
While I have performed the role of sole IT staff at a small software engineering company, and have therefore been the SysNetWebSecDB admin hydra in the past, in larger companies there seems to be no problem with having the system administrator create a default installation of Apache or IIS, having the network team configure the switches and DMZ, and having the web team customize the server and design the site without each of them having to know everything.
So the above is a good idea and I would encourage
them to do it because after that, it makes them
stonger than when they use an already completed one
to install.Sometimes there is time to sit down and read all the instructions and become a more robust IT professional. Sometimes there is only time to read the Getting Started section and you have to read the full instructions and optimize later if there is time. Sometimes you have outside influences that mean it has to get done in less time than it should, whether or not the justification for rushing is reasonable.
Should I plan to read every knowledge base article ever published by Microsoft in order to create a test bed installation of Windows 2008? Honestly, I’d still be reading the NT4 docs.
Not only does not every business have a DBA, or the money to hire one, sometimes the business does not want to do so, or sometimes the security is such that the DBA is not part of the unit allowed to utilize administrative access on the servers. That doesn’t mean they don’t need a database tomorrow.
As an IT professional, I will never be able to come close to encompassing the amount of knowledge I actually could use to do my job. I try to specialize in a few areas so that I have the ability to keep up with the exponential rate of IT expansion, but I basically consider a vast part of my job being constantly thrown into the deep end, and, fair or not, getting things done anyway. Hopefully that makes me good at my job. The question is how much time and effort I should need to apply before I can get to a reasonable starting point where everyone else can do their work too.
There
is normally no single document to achieve or complete
and installation unless the bespoke type. Apart from
the Install Guide, there could be Readme, Release
notes, Adendum etc. While I noted in a previous post that I shouldn't be too hard on Oracle in trying to document such a massive effort, that doesn’t mean that their documentation doesn’t need work. Why is the documentation for a single product spread out over tens of thousands of pages? It should be obvious that this has resulted in redundant and often conflicting documents, including the dozen readme documents in the installation files, the readme documents in the installed files, the install guide, the readme and addendum for each of those, the release notes for each of those, and a new set for each patch.
Obviously, for any installation, I need to complete a document for my own environment that contains the proper network configuration for our own LAN, or the proper partitioning. I do this for any program. Oracle needs me to change the name of the OS install to get their installer not to error out on their own OS. If OFA is so desirable, why not make the default install explain and follow OFA? Basic issues like this are highly avoidable, and shouldn’t be seen by the end user, even if in this case the end user is a highly technical audience capable of adjusting.
It will hard to get a single document because they
will be platform dependent and what someone did in
their install, may not always work everywhere.Again, please note that Oracle has "released" an OS that they intend for people to use on their Oracle validated hardware as a premier platform for their Oracle database. It isn't a stretch to feel that Oracle should then be able to provide valid, step-by-step instructions for a default installation of their own software, on validated hardware, on their own OS. I’m not expecting an optimized and populated database, but if the hardware, OS, and software are all under Oracle’s control, there aren’t really any variables other than machine name and IP address for a default install.
Hopefully my current knowledge will work for the time being, and I will be able to optimize appropriately in the future as I can.

DRM Process Manager failed to start with error Timeout starting the following process: NetJNIBridge.

When we Start the DRM DRM Process Manager failed to start with following error
[Process ID: 3948, Thread ID: 1, Process Manager]
Error loading the NetJNIBridge host process on machine: EU9SC1WNW001
System.Exception: Error loading the NetJNIBridge host process on machine: EU9SC1WNW001 ---> Oracle.Drm.Exceptions.ResourcedException`1[Oracle.Drm.Messages.MsgsProcessManager]: DRM-61028: The following unexpected error occurred communicating with URL 'EU9SC1WNW001': DRM-61023: Timeout starting the following process: NetJNIBridge. DRM Process ID: b3e602fa-f6c1-abcc-4af7-c0a99b51b235
at Oracle.Drm.ProcessManager.Program.ServiceMethod(String machineName, UInt16 port, Action`1 action)
at Oracle.Drm.ProcessManager.Program.StartNonEngineProcesses()
After 11.1.2.3 DRM upgrade

OS:linux
i am getting error in installing OPMN manually
when trying to installing OPMN manually getting error i.e,
opmnctl: starting opmn and all managed processes...
opmnctl: opmn start failed
when checked opmn/logs:
opmn.log is empty
ons.log showing error ie:
13/06/17 19:22:45 [4] ONS server initiated
13/06/17 19:22:45 [2] 10.209.178.16:6200 - thread create failed
ipm.log shoeing error i.e:
13/06/18 11:58:04 [4] OPMN server ready. Request handling enabled.
13/06/18 11:58:16 [4] PM state directory exists: /u02/app/orapp/product/10.1.2/opmn/logs/states
13/06/18 11:58:16 [4] PM state file does not exist: /u02/app/orapp/product/10.1. 2/opmn/logs/states/.opmndat
any idea why it is showing error??

The OPMN process manager failed to start

During the install of the 10g Infrastructure component I get the following
error
The OPMN process manager failed to start. Please check the logs in
/home/oracle/Infrastructure/opmn/logs directory for the cause of failure.
Once the cause of failure has been remedied, start OPMN manually and click
retry.
I've checked the status of OPMN with 'opmnctl status' and it show me that the OPMN is running
What is the prb?
thanks.

It could have taken few seconds to get up and OUI would have erred before that.
As long as all services are coming up, you have nothing to worry. If you want, you can increase logging levels in opmn.xml for more details

S9 EPM Architect Process Manager fails to start.

Hi All,
     I just tried doing Hyperion System9 installation and am encountering a problem.
     The Problem is, Installations are all done and the Configuration also seems to be
     fine as i get to know from seeing the Configuration utility window, but once i am done with
     configuring the Performance Management Architect, i tried starting the
     Hyperion S9 EPM Architect Process Manager and it was not starting,even i tried increasing the
     timeout setting for the startup of the dimension Server in the BPMA_Server_Config.xml file.Still
     it failed in starting..
     Other than all the steps mentioned in the doc,Few steps i skipped during the Planning Installation was,
     1.I didnt check the Activate instance option while creating the Planning Instance
     2.I didnt Increase the Heap Size of App Server.
     So could someone please suggest on what is creating the Problem during the startup.

Hi,
For more detailed information on why it is not starting have a look in windows event log. In windows go to administrative tools > event viewer > application
Double click HyS9BPMA_ProcessManager and there should be a more detailed description in the window.
e.g. Service cannot be started. Hyperion.DimensionServer.ProcessManager.Interface.ProcessManagerException: Process Manager could not start because database connectivity could not be established. --->
Cheers
John
http://john-goodwin.blogspot.com/

Oracle Process Manager failed to start(11.1.2)

Hi all!
I've installed and configured 11.1.2 on my VM(Win 2003 SP2)
Then i've been trying to start system but during launching Oracle Process manager I get the following error
Could not start Oracle Process Manage service(ohsInstance3250625901) on local computer
Error 1053: The service did not respond to the start request in a timely fashion
Then i checked Event log
The Oracle Process Manager (EPM_epmsystem1) service failed to start due to the following error:
Timeout (30000 milliseconds) waiting for the Oracle Process Manager (EPM_epmsystem1) service to connect.
The Oracle Process Manager (ohsInstance3250625901) service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Please help?
Regards
Alexander
Edited by: Softperson on 9/8/2010 15:36

Hi Jasmine
I've found a lot of errors in event viewer
Some of them bellow
"The Oracle Process Manager (EPM_epmsystem1) service failed to start due to the following error:
Timeout (30000 milliseconds) waiting for the Oracle Process Manager (EPM_epmsystem1) service to connect.
The Oracle Process Manager (ohsInstance3250625901) service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion."
Regards
Alexander

Rogue Process Management installation failing

Am failing to get even an admin user to run 'Rogue Process Management'
App.Object as per the "Setting up..." TID. I get the (helpful) error
message:
"Unknown error occurred for application
System-RoguePM.Applications.STC(id=-1 [FFFFFFFF], -1(FFFFFF])
after a rather long NAL splashscreen display. Probably something silly
but it passes me by. I can't send a regedit export dump as I haven't
been able to run it completion yet!
Even just creating as far as the key 'Process Management' fails...
I am running Win2K w'stations off NW6, ZW4.01

NetPerson wrote:
> There is no .axt (er, these are only generated by Snappshot, aren't
> they?). *The section in the above, 'Creating an Application Object to
> Distribute the Registry Modifications', has the entire registry change
> implemented in the App Object as it is generated in ConsoleOne
true... but via tools application launcher tools or similar in c1 you can
export an app...
Marcus Breiden
If you are asked to email me information please change -- to - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

Installing AS: special problem with OPMN Process Manager...

Hi everybody,
Actually, i'm trying to install a Grig control 10.2.0.1 on an existing database (10.2.0.1 patched to 10.2.0.4). OS is RHEL5.
I have the following problem during setup IAS for 3 days.
Note that my database is open and that didn't succeed in installing some rpm's, especially pdksh...
Here is the warning box:
The OPMN Process Manager failed to start.
Please check the logs in the
/u00/app/oracle/product/10.2.0/oms10g/opmn/logs directory for the cause of failue. Once the cause of the failure has been remedied, start OPMN manually and click Retry.
I start manually opmn and obtain this:
Processes in Instance: EnterpriseManager0.vmbasegrid
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | 6106 | Alive
HTTP_Server | HTTP_Server | 5955 | Alive
LogLoader | logloaderd | 6137 | Alive
dcm-daemon | dcm-daemon | 6189 | Alive
OC4J | home | 5962 | Alive
WebCache | WebCache | 5982 | Alive
WebCache | WebCacheAdmin | 5963 | Alive
But after clicking on retry, the same warning appears again!
By watching logs for each process at $ORACLE_HOME/opmn/logs, i didn't se any errors
moreover opmn.log is empty.
I already set $ORACLE_HOME, $PATH, $LD_LIBRARY_PATH.
I didn't find solutions nowhere so that's why I'm posting here.
Ideas and direction will be very helpful for me.
Thank you a lot,
Daniel.

Hi,
Thank your for answering.
Actually, i don't have this issues anymore, because I choice to intall this on RHEL4.6.
My DSA process was started because, i started it manually to see what will happen.
Now I succeeded for the installation, I have a new probleme during the configuration with OUI CA.
The OMS configuration failed and the file configToolFailedCommands show that:
oracle.sysman.emcp.agent.AgentPlugin failed.
Have you any idea ?

Installing Grid console: special problem with OPMN Process Manager...

Hi everybody,
Actually, i'm trying to install a Grig control 10.2.0.1 on an existing database (10.2.0.1 patched to 10.2.0.4). OS is RHEL5.
I have the following problem during for 3 days.
Note that my database is open and that didn't succeed in installing some rpm's, especially pdksh...
Here is the warning box:
The OPMN Process Manager failed to start.
Please check the logs in the
/u00/app/oracle/product/10.2.0/oms10g/opmn/logs directory for the cause of failue. Once the cause of the failure has been remedied, start OPMN manually and click Retry.
I start manually opmn and obtain this:
Processes in Instance: EnterpriseManager0.vmbasegrid
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | 6106 | Alive
HTTP_Server | HTTP_Server | 5955 | Alive
LogLoader | logloaderd | 6137 | Alive
dcm-daemon | dcm-daemon | 6189 | Alive
OC4J | home | 5962 | Alive
WebCache | WebCache | 5982 | Alive
WebCache | WebCacheAdmin | 5963 | Alive
But after clicking on retry, the same warning appears again!
By watching logs for each process at $ORACLE_HOME/opmn/logs, i didn't se any errors
moreover opmn.log is empty.
I already set $ORACLE_HOME, $PATH, $LD_LIBRARY_PATH.
I didn't find solutions nowhere so that's why I'm posting here.
Ideas and direction will be very helpful for me.
Thank you a lot,
Daniel.

Please paste the install action log for this install

Hyperion S9 EPM Architect Process Manager Service Fails

Hello All,
I am fairly new with working on Hyperion. I have installed Hyperion Planning 9.3 on my local machine that runs on Windows XP. I am usning SQL Server 2005 as my database. I am having difficulty getting the EPM Process Manager Architect to start. It fails to start and when I look in the event viewer it displays the following error message:
[Engine Startup] FATAL An error occurred during initialization of engine ID 1: Invalid object name 'DS_Property_list'..Exception: System.Data.SqlClient.SqlException
Message: Invalid object name 'DS_Property_list'.
Source: .Net SqlClient Data Provider
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Hyperion.DataAccessLayerCore.DataAccessLayer.ExecWriteSQL(Boolean CanWrite, String SQL, Action`1 onAddParams)
at Hyperion.DimensionServer.DAO.PropertyManagerDAO.ClearPropertyAllowedValues(Int32 propertyID)
at Hyperion.DimensionServer.PropertyManager.UpdatePropertyAllowedValues(Property property, IList`1 allowedValues)
at Hyperion.DimensionServer.ProductRegistration.ParsePropertyDefinition(XPathNavigator nav)
at Hyperion.DimensionServer.ProductRegistration.ParsePropertyCategory(XPathNavigator nav, ApplicationClass appClass)
at Hyperion.DimensionServer.ProductRegistration.ParseApplicationClass(XPathNavigator nav, String fileName, XmlDocument doc)
at Hyperion.DimensionServer.ProductRegistration.ParseProduct(String fileName, Boolean fileMustExist)
at Hyperion.DimensionServer.Program.Main(String[] args)
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Has anyone come across an issue such as this? The rest of my processes start/stop as expected, but the EPM Process Manager does not. Any quidance or information as to how this can be resolved would be greatly appreciated. Thank you.
Corey

Hi am having same issue. The error is
ervice cannot be started. Hyperion.DimensionServer.ProcessManager.Interface.ProcessManagerException: Process Manager could not start because database connectivity could not be established. ---> System.Data.SqlClient.SqlException: Login failed for user 'windowsAuthentication'.
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword,...
Please any body can help on this.

BPEL Process Manager Oracle BPEL Domain Initialization Failed

I was able to login into BPEL Process Manager without any error. Then I changed one entry in the oc4j-ra.xml file and restarted the BPEL server and started getting the error message.
Oracle BPEL Domain Initialization Failed
The Oracle BPEL Domain default did not initialize successfully. The following error was detected during startup. Please contact the Oracle Support
Team if you are not able to resolve this problem.
Reported Error:
Cannot lookup jdbc datasource.
The process domain was unable to lookup the TX datasource "eis/DB/DBConnection1".
Please check that the machine hosting the datasource is physically connected to the network. Additionally check that the
connection pool properties as defined in the application server startup
properties are valid.
I put back the original oc4j-ra.xml back in appropriate dir , restarted the BPEL server and database server still getting the same errro message listed above, It's urgent can anybody post the possible solution/suggestion experience.
Thanks

I opened the file under
./application-deployments/default/DbAdapter/oc4j-ra.xml and it has the following entry
<connector-factory location="eis/DB/DBConnection1" connector-name="Database Adapter">
<config-property name="xADataSourceName" value="jdbc/DBConnection1DataSource"/>
<config-property name="dataSourceName" value="loc/DBConnection1DataSource"/>
<config-property name="platformClassName" value="oracle.toplink.platform.database.Oracle9Platform"/>
<config-property name="usesNativeSequencing" value="true"/>
<config-property name="sequencePreallocationSize" value="50"/>
<config-property name="defaultNChar" value="false"/>
<config-property name="usesBatchWriting" value="true"/>
<connection-pooling use="none">
</connection-pooling>
<security-config use="none">
</security-config>
</connector-factory>
I opened that file (
./connectors/DbAdapter/DbAdapter/META-INF/oc4j-ra.xml) and it has no entry for
<connector-factory location="eis/DB/DBConnection1" connector-name="Database Adapter">
<config-property name="xADataSourceName" value="jdbc/DBConnection1DataSource"/>
<config-property name="dataSourceName" value="loc/DBConnection1DataSource"/>
<config-property name="platformClassName" value="oracle.toplink.platform.database.Oracle9Platform"/>
<config-property name="usesNativeSequencing" value="true"/>
<config-property name="sequencePreallocationSize" value="50"/>
<config-property name="defaultNChar" value="false"/>
<config-property name="usesBatchWriting" value="true"/>
<connection-pooling use="none">
</connection-pooling>
<security-config use="none">
</security-config>
</connector-factory>
So I entered this and restarted the BPEL PM but still no luck,
Is anything else I will be looking in that file let me know

Dreaded "Operations Manager failed to start a process" error (2012 R2)

I know this error has been covered many times, and on many topics, but this time mine is slightly different.   It's
NOT the
"SCOMpercentageCPUTimeCounter" error covered by Kevin Holman.
Also, I am running SCOM 2012 R2 UR4 (7.1.10226.1046) and everything seems correctly patched (MS and agents), like
suggested by Nicole Welch and Kevin Holman as well.
So my environment is a fresh installation of SCOM 2012 R2, and I am transferring to this new Management Group, the monitored servers from our old SCOM 2012 "R1" (which I did not upgrade but rather made a brand new independent install). So
all servers aren't migrated yet, but I would like to solve this error before. This error did NOT happen in "R1", nor was it overridden (I imported the exact same Management Packs anyway).
On 2012 R2, it happens on almost all new monitored machines, mainly Read-Only Domain Controllers (RODCs).
Here is the kind of alert text I am getting:
Het om 10:10:15 gestarte proces is beëindigd als gevolg van een uitvoerverzamelfout als gevolg van fout 0x80070057 :
The parameter is incorrect.
; mogelijk zijn er gegevens verloren gegaan.
Opdracht die is uitgevoerd: "C:\Windows\system32\cscript.exe" //nologo "C:\Program Files\Microsoft Monitoring Agent\Agent\Health Service State\Monitoring Host Temporary Files 193\24788\AD_Global_Catalog_Search_Response.vbs"
RODC02.mydomain.be (objectCategory=DMD) false 4 {9E253FCB-8AAF-491F-CCA3-E632C6C2800C}
Werkmap: C:\Program Files\Microsoft Monitoring Agent\Agent\Health Service State\Monitoring Host Temporary Files 193\24788\
Dit is van invloed op een of meer werkstromen.
Werkstroomnaam: Microsoft.Windows.Server.2008.AD.DomainController.GCSearchTime.Monitor
Exemplaarnaam: RODC02
Our servers have Belgian (Dutch) regional settings, hence the language. But check out the highlighted info in bold.
The related event Number (in Alert Context) is 21404. Most other articles about this, mention 21402 or 21403. I suppose they all must be related but still, it's a new one here.
There you have the failing VBS file. I checked all alerts and there seem to be different files concerned overall. Other examples:
C:\Program Files\Microsoft Monitoring Agent\Agent\Health Service State\Monitoring Host Temporary Files 233\22737\AD_Database_and_Log.vbs    (from almost all RODCs)
C:\Program Files\Microsoft Monitoring Agent\Agent\Health Service State\Monitoring Host Temporary Files 196\19876\Microsoft.Windows.Server.Legacy.FreeSpace.vbs
(also from an RODC)
C:\Program Files\Microsoft System Center 2012 R2\Operations Manager\Server\Health Service State\Monitoring Host Temporary Files 5891\338282\Microsoft.Windows.Server.CPUUtilization.Monitortype.vbs 95 15
SCOM02.mydomain.be 1.4119384288787842     (this one is from my second Management Server..)
Repeat count of the alert is 1 to 2 a day, so it's not nightmareish, but still, requires to be fixed. I suspect that even if there is a different VBS file concerned, since the eventID and the alert text are the same, the repeat count will just increase,
not showing the last actual VBS concerned.
I connect to each of these servers, and browse to the directory containing the file, and the folder is there, the file is there. The error text mentions incorrect parameters but they still seem OK to me.
I found something which might be worth noting: when browsing to the directory, be it on an RODC or on the SCOM server, I get a permission popup requiring some admin rights to do so - although I am using my domain admin (+SCOM+SQL+local
admin everywhere) account:
SCOM services use the Local System account to run, on every machine. I thought Local System shouldn't be concerned with these permissions popups, but normally the domain/local admins aren't either, yet I am.
The "Health service" folder is the only one from the "C:\Program Files\Microsoft Monitoring Agent\Agent" folder to be concerned with this; I can browse without trouble to any other directory there.
After a SCOM service stop, I renamed the "Health Service state" folder (as you can see on the screenshot, there is a "Health Service State bak" folder) and let the service recreate it after a restart, to ensure it was clean and with
appropriate permissions , but it doesn't help.
Might that be a clue?
Or else what? I'm getting confused and don't find a suitable solution.
dd
Bix

On Thu, 4 Dec 2014 14:20:22 +0000, Bixessss wrote:
I know this error has been covered many times, and on many topics, but this time mine is slightly different.   It's*NOT* the "SCOMpercentageCPUTimeCounter" error covered by Kevin Holman <http://blogs.technet.com/b/kevinholman/archive/2010/02/23/a-new-script-error-scompercentagecputimecounter-vbs-invalid-class.aspx>.
Also, I am running *SCOM 2012 R2 UR4* (7.1.10226.1046) and everything seems correctly patched (MS and agents), likesuggested by Nicole Welch <http://nicolewelchscom.wordpress.com/2013/10/01/operations-manager-failed-to-start-a-process/>
and Kevin Holman as well.
This forum is for security issues related to Windows Server and not for
System Center questions.
Post your question in one of the following forums:
https://social.technet.microsoft.com/Forums/systemcenter/en-US/home?category=systemcenteroperationsmanager
Thanks.
Paul Adare - FIM CM MVP
Never trust a computer you can't lift. - Stan Masor

SMS_DISCOVERY_DATA_MANAGER Message ID 2636 and 620. Discovery Data Manager failed to process the discovery data record (DDR)

Hi
I'm seeing this critical error on my primary.
SMS_DISCOVERY_DATA_MANAGER Message ID 2636 and 620.
Discovery data manager failed to process the discovery data record (DDR)"D:\Prog.....\inboxes\auth\ddm.box\userddrsonly\adu650dh.DDR", because it cannot update the data source.
Where these ddr's are actually under ddm.box\userddrsonly\BAD_DDRS folder
I see a ton of DDR files in that folder. Not sure if I can delete them, so I moved them to a temp folder. AD User discovery keeps generating them.
Any help ?
Thanks
UK

Check the ddm.log file for more information.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Distribution Manager failed to process package triggers an update of the packages

Hi all,
we have randomly following issue:
SCCM 2012 Sp1 CAS, takes a snapshot of a Windows update package in the morning (not sure how the frequency of this check is done). If for any reason it fails, SCCM automatically redistributes the package to all sites. This happened this morning again for 5
Windows updates packages. You understand that this means GB sent to all Secondary sites (66) with an useles amount of data sent out.
From the Status messages I see
Information Milestone RC0 06.11.2014 07:12:11 SCHVSGGSC600.rccad.net SMS_DISTRIBUTION_MANAGER 2300 Distribution Manager is beginning to process package "SUP-2014.09" (package ID = RC00017B).
Then lot of updates lists with comment taking a snapshot and finally
Error Milestone RC0 06.11.2014 07:12:29 SCHVSGGSC600.rccad.net SMS_DISTRIBUTION_MANAGER 2302 Distribution Manager failed to process package "SUP-2014.09" (package ID = RC00017B). Possible cause: Distribution manager does not have access to either the package source directory or the distribution point. Solution: Verify that distribution manager can access the package source directory/distribution point. Possible cause: The package source directory contains files with long file names and the total length of the path exceeds the maximum length supported by the operating system. Solution: Reduce the number of folders defined for the package, shorten the filename, or consider bundling the files using a compression utility. Possible cause: There is not enough disk space available on the site server computer or the distribution point. Solution: Verify that there is enough free disk space available on the site server computer and on the distribution point. Possible cause: The package source directory contains files that might be in use by an active process. Solution: Close any processes that maybe using files in the source directory. If this failure persists, create an alternate copy of the source directory and update the package source to point to it.
This triggers immediately an update of all DPs
Information Milestone RC0 06.11.2014 07:43:52 SCHVSGGSC600.rccad.net SMS_DISTRIBUTION_MANAGER 2304 Distribution Manager is retrying to distribute package "RC00017B". Wait to see if the package is successfully distributed on the retry.
Any idea
How this can be avoided, since nobody changed the package and we suppose it was a temp connection issue between the CAS and the package repository server
If this check can be set up to once a week for instance or even less?
Thanks,
Marco

Hi Daniel,
thanks for the prompt answer. Actually I saw it yesterday at least for 1 package (the last one). The error is generate by SQL killing a task
Adding these contents to the package RC00010D version 347.
SMS_DISTRIBUTION_MANAGER 06.11.2014 07:12:23
7796 (0x1E74)
Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER
06.11.2014 07:12:23 3652 (0x0E44)
*** [40001][1205][Microsoft][SQL Server Native Client 11.0][SQL Server]Transaction (Process ID 152) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
SMS_DISTRIBUTION_MANAGER 06.11.2014 07:12:25
5460 (0x1554)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SCHVSGGSC600.rccad.net SITE=RC0 PID=2144 TID=5460 GMTDATE=jeu. nov. 06 06:12:25.422 2014 ISTR0="SUP-2012.Q4" ISTR1="RC000068" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="RC000068"
SMS_DISTRIBUTION_MANAGER 06.11.2014 07:12:25
5460 (0x1554)
Failed to process package RC000068 after 0 retries, will retry 100 more times
SMS_DISTRIBUTION_MANAGER 06.11.2014 07:12:25
5460 (0x1554)
Exiting package processing thread. SMS_DISTRIBUTION_MANAGER
06.11.2014 07:12:25 5460 (0x1554)
Used 4 out of 5 allowed processing threads.
SMS_DISTRIBUTION_MANAGER 06.11.2014 07:12:26
3300 (0x0CE4)
Starting package processing thread, thread ID = 0x894 (2196)
SMS_DISTRIBUTION_MANAGER 06.11.2014 07:12:27
3300 (0x0CE4)
Used all 5 allowed processing threads, won't process any more packages.
SMS_DISTRIBUTION_MANAGER 06.11.2014 07:12:27
3300 (0x0CE4)
Sleep 1828 seconds... SMS_DISTRIBUTION_MANAGER
06.11.2014 07:12:27 3300 (0x0CE4)
STATMSG: ID=2300 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SCHVSGGSC600.rccad.net SITE=RC0 PID=2144 TID=2196 GMTDATE=jeu. nov. 06 06:12:27.716 2014 ISTR0="SUP-2014.M05" ISTR1="RC00011D" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="RC00011D"
SMS_DISTRIBUTION_MANAGER 06.11.2014 07:12:27
2196 (0x0894)
Start updating the package RC00011D... SMS_DISTRIBUTION_MANAGER
06.11.2014 07:12:27 2196 (0x0894)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=RC00011D, Version=14, Status=2300
SMS_DISTRIBUTION_MANAGER 06.11.2014 07:12:27
2196 (0x0894)
*** [40001][1205][Microsoft][SQL Server Native Client 11.0][SQL Server]Transaction (Process ID 154) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
SMS_DISTRIBUTION_MANAGER 06.11.2014 07:12:27
1424 (0x0590)
Taking package snapshot for package RC00011D
SMS_DISTRIBUTION_MANAGER 06.11.2014 07:12:27
2196 (0x0894)
Now as I mentioned it was probably an SQL (more likely) or networ issue, however the question was more about how to avoid that. Finally the packages were not changed and if possible I would avoid any automatic SCCM action on packages unless an operator manually
triggers them.
I didn't see any error today, so it should not be a configuration issue.
Is this possible?

Process Manager fails on startup

Similar Messages

Maybe you are looking for