Process Manager is not initialized

Dear MDM/DRM experts,
New to DRM, I seek your help in configuring DRM on my local machine. I have installed server and its is running well. I can connect to database as well. The problem is, when I try to login with mdm_system user, I get this message "Process Manager is not initialized". In DRM console, I see a "No" against MDM Process Manager and MDM event manager. There is no service created with the name MDM Process Manager in Windows services panel.
I have created two users with admin access on my machine: mdm_system and mdm_db. There is a point I need to mention here, I got an error while installing com+ applications. Rest goes fine after that. I don't know if the error has anything to do with COM+ installation.
Any ideas on above problem are appreciated.
Thanks in advance,
Ashish K

As far as the "Process Manager is not initialized" error is concerned, we got the same error recently.
What we did was restart the DRM services on the server - The N-Tier Client and the Web-Publisher.
However, after doing it - we still got the error or DRM would not respond. On looking through it again, we saw that the Task Manager on the Server did not kill the DRM processes and so we did it manually. Then we restarted the services and it worked fine this time. See if this works for you - first kill all the services on the client sides and then on the server side, check for the client and server side process task manager and then restart the service. This worked for us, hopefully it works for you too.
-- Adi

Similar Messages

Facing an error while restarting the services : Process Manager is not initialized.

while setting up the MDM environment I somehow messed up all the database connections.
Now im unable to start or stop the services properly.
Below is the error shown in the event viewer log for process MDM Ntier Process manager :
The description for Event ID ( 3 ) in Source ( MDM NTier Process Manager ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Exception Emdm_Exception with message 'Process Manager is not initialized.'.
Kindly help
I suspect this is because incorrect password for Engine login MDM_SYSTEM or incorrect configuration file (config.xml), However i may be wrong.

As far as the "Process Manager is not initialized" error is concerned, we got the same error recently.
What we did was restart the DRM services on the server - The N-Tier Client and the Web-Publisher.
However, after doing it - we still got the error or DRM would not respond. On looking through it again, we saw that the Task Manager on the Server did not kill the DRM processes and so we did it manually. Then we restarted the services and it worked fine this time. See if this works for you - first kill all the services on the client sides and then on the server side, check for the client and server side process task manager and then restart the service. This worked for us, hopefully it works for you too.
-- Adi

Workflow Process Manager - Could not route message to WfProcMgr with regist

Hi,
We recently started getting a strange error in our DEV environment:
Could not route message to WfProcMgr with registered key (null)
This is happening with the Server Component, Workflow Process Manager, and all services associated with this.
We are using Siebel v7.8.2.8. If anybody can provide any pointers, it would be of great help!
Thanks

Hi Trym,
Thanks for your time!
The target workflow that I am triggering from the WfProcMgr is a custom workflow and it does not have a BO defined. So, the Object Id should not be a mandatory field (I am in any case, not passing any Object Id). Nevertheless, whether I have an Object Id or I do not, I would assume that the Workflow would at least get triggered. I donot see as to why the Workflow would not trigger at all.
Though Siebel does act weird at times, I think the error I am getting is still somehow related to the actual cause! I would really like to understand as to where is this Registered Key stored in Siebel that it is continually searching for.
*When you say "Workflow Process Manager server component directly" do you mean like in a eScript
call in e.g. a Business Service?*
Please refer the second part of my previous post for this. I am trying through Server Requests BS and through Workflow Policies.
Thanks.

Hyperion EPM Architech-Process Manager will not Start

Hello-
On April 1st we had some issues with a re-deployment of an application and Oracle Support told us to change Deployment_Pending_Timeout config from 8 hours to 4 min. Then we tried to restart the Hyperion EPM Architech-Process Manager task on the server and it would not restart. Below are the error message we recieved in Event Viewer. We worked with Oracle Support all last week and they finally suggested we install Patch 9535372 to fix out issue. So we installed patch and it did NOT fix our issue.
Error Message 1
Service cannot be started. System.ServiceProcess.TimeoutException: Time out has expired and the operation has not been completed.
at System.ServiceProcess.ServiceController.WaitForStatus(ServiceControllerStatus desiredStatus, TimeSpan timeout)
at Hyperion.DimensionServer.ProcessManager.ProcessManager.StartNetJNIBridge()
at Hyperion.DimensionServer.ProcessManager.ProcessManager.Initialize()
at Hyperion.DimensionServer.ProcessManager.Service.OnStart(String[] args)
at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
For more information, see Help and Support Center at
Error Message 2
Engine Startup] FATAL An error occurred during initialization of engine ID 1: Object reference not set to an instance of an object..System.NullReferenceException: Object reference not set to an instance of an object.
at Hyperion.DimensionServer.RelationshipMemberList.Add(RelationshipMember item)
at Hyperion.DimensionServer.Dimension.<LoadSharedMembers>b__11(RelationshipRecord relationship)
at Hyperion.DataAccessLayerCore.DALRowset`1.Read()
at Hyperion.DataAccessLayerCore.DALRowset`1.Execute()
at Hyperion.DataAccessLayerCore.SelectCommand`1.Execute(Action`1 callback)
at Hyperion.DataAccessLayerCore.GenericDAO.Select[T](Action`1 callback, SetParamsEvent`1 onSetParams)
1. I was wondering if you have seen this error before and what the result is?
2. Also have you heard of anyone istalling Patch 9535372 and what issues it resolved?
I appreciate your help!
Thanks

Hi,
Something appearently went wrong in EPMA database and unfortunately this is not something extraordinarily unusual in EPMA world. If you have a reliable backup dated just before 1st of April, I would advise to restore it back. Otherwise, you have to dive into the dark tunnels of EPMA tables which I would not recommend quiet highly.
Cheers,
Alp

BPEL Process Manager Olite not starting.

Hi,
We have recently installed Oracle BPEL Process Manager 10.1.2 with Jdeveloper. The problem is that I am not able to start BPEL server. It gives following message and stops there itself.
C:\Apps\OraBPELPM_1\integration\orabpel\bin>set PATH=C:\Apps\OraBPELPM_1\integration\orabpel\bin;C:\Apps\OraBPELPM_1\jdk\jre\bin\server;C:\Apps\OraBPELPM_1\jdk\
bin;C:\WINDOWS\system32;C:\WINDOWS\System32\Wbem;C:\Program Files\IBM\Trace Facility\;C:\Program Files\IBM\Personal Communications\;C:\Program Files\Assyst Enterprise 6.5;C:\Program Files\Lotus\Notes;C:\OraNT\ORA11i\bin;C:\OraNT\ORA11i\JRE1
1\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bi
n;C:\ORANT\ORA92\bin;C:\ORANT\ora817\bin;C:\Program Files\Oracle\jre\1.1.7\bin;C:\OraNT\ORA11i\jdk\bin;C:\Apps\OrclJdev\Jdevhome\jdev
C:\Apps\OraBPELPM_1\integration\orabpel\bin>set classpath=C:\Apps\OraBPELPM_1\integration\orabpel\lib\olite40.jar
C:\Apps\OraBPELPM_1\integration\orabpel\bin>call C:\Apps\OraBPELPM_1\integration\orabpel\bin\olsv2040.exe /debug
Debugging Oracle Lite Multiuser Service.
It should lauch another command prompt window for starting the BPEL oracle lite process manager. But its not. Does anyone know whether its a permission issue or anything else.

No idea, but is there a reason to use 10.1.2? Why not step over to 10.1.3.
Marc

Process Order API not initiating PO Acknowledgment Transaction.

I have set up a Customer as trading partner in XML Gateway, taking care that the primary Sold To site is used for set up in XML Gateway. When i am creating orders using API, it is not triggering the Purchase Order Acknowledgment transaction.
Does API support calling POA transaction ?

All of order processing in order management is done using a private version of the process order API. (i.e the OE_PROCESS_ORDER_PVT package.) Hence, it will not matter to the PO acknowledgment transaction, how you create the order. The acknowledgment should get created. POAO is the transaction for the EDI acknowledgment (US: EDI 855 document)
Do you see the "_ACK" tables getting populated with acknowledgment data? If yes, you will need to investigate the extraction program for POAO. If not, you will need to investigate in OM.
Hope this helps.
Thanks.
Kannan

EPMA process manager service is not starting

Hi gurus,
I'm working on Hyperion v-11.1.1.3 and in that i'm not able to start the EPMA process manager.It is throwing an error message as
The Hyperion EPM Architect - ProcessManager service on local Computer started and then stopped
Some services stop automatically if they have no work to do, for example, the performance Logs and Alerts Service.
When checking in the dimension server logs/eventvwr it is showing the following error message. But some times it is showing 1053 error message that-the process manager is not starting in a timely etc..
*[Engine Startup] Hyperion.DimensionServer.Program.LogMessage(:0) - An error occurred during initialization of engine ID 1: ORA-01115: IO error reading block from file 4 (block # 782666)*
ORA-15081: failed to submit an I/O operation to a disk
ORA-15081: failed to submit an I/O operation to a disk
ORA-01115: IO error reading block from file 4 (block # 782666)
ORA-15081: failed to submit an I/O operation to a disk
ORA-15081: failed to submit an I/O operation to a disk
System.Data.OracleClient.OracleException: ORA-01115: IO error reading block from file 4 (block # 782666)
ORA-15081: failed to submit an I/O operation to a disk
ORA-15081: failed to submit an I/O operation to a disk
ORA-01115: IO error reading block from file 4 (block # 782666)
ORA-15081: failed to submit an I/O operation to a disk
ORA-15081: failed to submit an I/O operation to a disk
at System.Data.OracleClient.OracleConnection.CheckError(OciErrorHandle errorHandle, Int32 rc)
at System.Data.OracleClient.OracleLob.Read(Byte[] buffer, Int32 offset, Int32 count)
at System.IO.StreamReader.ReadBuffer()
at System.IO.StreamReader.ReadToEnd()
at System.Data.OracleClient.OracleLob.get_Value()
at System.Data.OracleClient.OracleColumn.GetValue(NativeBuffer_RowBuffer buffer)
at System.Data.OracleClient.OracleDataReader.GetValue(Int32 i)
at Hyperion.DataAccessLayerCore.DALDatasetCommand.ColumnValue(Int32 index)
at Hyperion.DataAccessLayerCore.DALRowset`1.Read()
at Hyperion.DataAccessLayerCore.DALRowset`1.Execute()
at Hyperion.DataAccessLayerCore.SelectCommand`1.Execute(Action`1 callback)
*at Hyperion.DataAccessLayerCore.GenericDAO.Select[T](Action`1 callback, SetParamsEvent`1 onSetParams)*
at Hyperion.DimensionServer.DAO.DimensionPropertyManagerDAO.LoadDimensionMemberMemoProperties(Int32 libraryID, Int32 dimensionID, Action`1 action)
at Hyperion.DimensionServer.PropertyManager.LoadDimension(Dimension dimension)
at Hyperion.DimensionServer.PropertyManager.LoadProperties()
at Hyperion.DimensionServer.Library.Load()
at Hyperion.DimensionServer.Global.Initialize(String jobManagerConnectString)
at Hyperion.DimensionServer.Program.Main(String[] args)
What could be the reason for the issue and the possible resolution.I have checked in other posts in the forum but unable figure out resolution.
If it is related to Oracle client issue then where can we find out the installed oracle client in the server?
Thanks in advance

Hi John,
Thanks for the information..i have checked and came to know that the db server is down.
It is working fine now.
Could you please let me know..what all the services will not be available if Process manager service is not started?
Thanks in advance

Unable to start obiee11g oracle process manager

hi,
i am unable to start the server
console services are started and bni_server1 also started but oracle process manager is not running
please help
thanks
chinu

–> Start NodeManager from the Command Prompt
Cd bi0104\wlserver_10.3\server\bin
startNodeManager.cmd
Wait untill you see message “Secure socket listener start at port……”
–> Start Admin server from command prompt
Cd bi0104\user_projects\domains\bifoundation_domain\bin
startWebLogic.cmd
It will ask for user name / password. Specify the user details that you used at the time of the Oracle BI 11g install. You could also use a ‘Boot Identity File’ -(boot.properties). Check the documentation for more details.
Wait untill you see message Admin server is in ‘RUNNING MODE’.
–> Now start Managed server from GUI
Access WebLogic console from a webbrowser
http://<machinename>:7001/console
Login, Environment > servers > Control > select bi_server1 > click on start
It would take some time for the Managed server to start. Wait untill you see the ‘Running’ status.
–> Now start the OBIEE components from command prompt
Cd bi0104\instances\instance7\bin
opmnctl startall
Note that it’s a possible startup sequence. There are multiple ways to statup.
i am getting all above messages all but not getting oracle process manager up in the services.msc
error : not getting up in timely fashion -1053
thanks
Edited by: user11165720 on Apr 1, 2011 4:24 AM

Unable to start EPMA PROCESS MANAGER

I'm having an issue starting the EPMA Process Manager service ERROR :
Service cannot be started. Hyperion.DimensionServer.ProcessManager.Interface.ProcessManagerException: Cannot initialize the Session Manager. ---> System.ArgumentException: An item with the same key has already been added.
at System.ThrowHelper.ThrowArgumentException(ExceptionResource resource)
at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
at Hyperion.DataAccessLayerCore.SchemaReaderSqlServer.<FillTableList>b__0(DALDatasetCommand command)
at Hyperion.DataAccessLayerCore.DataAccessLayer.ExecLoadSQL(String SQL, Action`1 onSetParams, Action`1 onRead, DatabaseContext context)
at Hyperion.DataAccessLayerCore.SchemaReaderSqlServer.FillTableList()
at Hyperion.DataAccessLayerCore.BaseSchemaReader.GetTableList()
at Hyperion.DataAccessLayerCore.DataAccessLayer.FillSchema()
at Hyperion.DataAccessLayerCore.DataAccessLayer..ctor(NameValueCollection settings, String tablePrefix, String baseNamespace, String schemaVersion)
at Hyperion.SessionManager.DAO.SessionManagerDataA...
Any help would be greatly appreciated. Thanks

Hi,
I believe this happens when you have a problem with your datasources or instances, if you have two conflicting ones then the process manager will not start up.
Can you check your planning instances and datasources and remove any duplicates or ones that could be conflicting.
Cheers
John
http://john-goodwin.blogspot.com/

Jdev version compatible with BPEL Process Manager

Hi,
I would like to know if there is any compatibility issues between the versions of JDev and BPEL Process Manager. (Please note we have only BPEL Process Manager and not the complete SOA suite).
Thanks.
Vipal

The documentation would mention to use same versions, but may be not be the exact justification. However, here it goes : mostly for testcases related to humanworkflows/custom worklist applications.

S9 EPM Architect Process Manager fails to start.

Hi All,
     I just tried doing Hyperion System9 installation and am encountering a problem.
     The Problem is, Installations are all done and the Configuration also seems to be
     fine as i get to know from seeing the Configuration utility window, but once i am done with
     configuring the Performance Management Architect, i tried starting the
     Hyperion S9 EPM Architect Process Manager and it was not starting,even i tried increasing the
     timeout setting for the startup of the dimension Server in the BPMA_Server_Config.xml file.Still
     it failed in starting..
     Other than all the steps mentioned in the doc,Few steps i skipped during the Planning Installation was,
     1.I didnt check the Activate instance option while creating the Planning Instance
     2.I didnt Increase the Heap Size of App Server.
     So could someone please suggest on what is creating the Problem during the startup.

Hi,
For more detailed information on why it is not starting have a look in windows event log. In windows go to administrative tools > event viewer > application
Double click HyS9BPMA_ProcessManager and there should be a more detailed description in the window.
e.g. Service cannot be started. Hyperion.DimensionServer.ProcessManager.Interface.ProcessManagerException: Process Manager could not start because database connectivity could not be established. --->
Cheers
John
http://john-goodwin.blogspot.com/

Hyperion S9 EPM Architect Process Manager Service Fails

Hello All,
I am fairly new with working on Hyperion. I have installed Hyperion Planning 9.3 on my local machine that runs on Windows XP. I am usning SQL Server 2005 as my database. I am having difficulty getting the EPM Process Manager Architect to start. It fails to start and when I look in the event viewer it displays the following error message:
[Engine Startup] FATAL An error occurred during initialization of engine ID 1: Invalid object name 'DS_Property_list'..Exception: System.Data.SqlClient.SqlException
Message: Invalid object name 'DS_Property_list'.
Source: .Net SqlClient Data Provider
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Hyperion.DataAccessLayerCore.DataAccessLayer.ExecWriteSQL(Boolean CanWrite, String SQL, Action`1 onAddParams)
at Hyperion.DimensionServer.DAO.PropertyManagerDAO.ClearPropertyAllowedValues(Int32 propertyID)
at Hyperion.DimensionServer.PropertyManager.UpdatePropertyAllowedValues(Property property, IList`1 allowedValues)
at Hyperion.DimensionServer.ProductRegistration.ParsePropertyDefinition(XPathNavigator nav)
at Hyperion.DimensionServer.ProductRegistration.ParsePropertyCategory(XPathNavigator nav, ApplicationClass appClass)
at Hyperion.DimensionServer.ProductRegistration.ParseApplicationClass(XPathNavigator nav, String fileName, XmlDocument doc)
at Hyperion.DimensionServer.ProductRegistration.ParseProduct(String fileName, Boolean fileMustExist)
at Hyperion.DimensionServer.Program.Main(String[] args)
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Has anyone come across an issue such as this? The rest of my processes start/stop as expected, but the EPM Process Manager does not. Any quidance or information as to how this can be resolved would be greatly appreciated. Thank you.
Corey

Hi am having same issue. The error is
ervice cannot be started. Hyperion.DimensionServer.ProcessManager.Interface.ProcessManagerException: Process Manager could not start because database connectivity could not be established. ---> System.Data.SqlClient.SqlException: Login failed for user 'windowsAuthentication'.
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword,...
Please any body can help on this.

Oracle process manager

hi,
i am unable to start the server
console services are started and bni_server1 also started but oracle process manager is not running
please help
thanks
chinu

Chinu,
What error are you getting?
Have you checked the logs?
The best thing to do is set everything back to the base install, such as RPD and webcat which can prevent presentation services from starting up properly

ServletContainerAdapter manager not initialized correctly wls11g

Hi,
I am using the weblogic 11g(10.3.1 version) to connect with LDAP server.
I created the new authenticatior provider.in provider specific tab of this Authenticator Provider,
i gave the settings for LDap server.
then,i restarted the weblogic server.and check for the users in security realm,then i am not getting any users from Ldap.
The base_domain.log is :
####<Oct 3, 2009 6:13:20 PM GMT+05:30> <Notice> <Security> <d2i3pc002> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1254573800182> <BEA-090082> <Security initializing using security realm myrealm.>
####<Oct 3, 2009 6:13:22 PM GMT+05:30> <Warning> <Deployer> <d2i3pc002> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1254573802964> <BEA-149617> <Non-critical internal application uddi was not deployed. Error: [Deployer:149158]No application files exist at 'C:\oracle\MIDDLE~1\WLS103~1.0\WLSERV~1.3\server\lib\uddi.war'.>
####<Oct 3, 2009 6:13:22 PM GMT+05:30> <Warning> <Deployer> <d2i3pc002> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1254573802964> <BEA-149617> <Non-critical internal application uddiexplorer was not deployed. Error: [Deployer:149158]No application files exist at 'C:\oracle\MIDDLE~1\WLS103~1.0\WLSERV~1.3\server\lib\uddiexplorer.war'.>
####<Oct 3, 2009 6:13:23 PM GMT+05:30> <Notice> <WebLogicServer> <d2i3pc002> <AdminServer> <main> <<WLS Kernel>> <> <> <1254573803979> <BEA-000365> <Server state changed to STANDBY>
####<Oct 3, 2009 6:13:23 PM GMT+05:30> <Notice> <WebLogicServer> <d2i3pc002> <AdminServer> <main> <<WLS Kernel>> <> <> <1254573803979> <BEA-000365> <Server state changed to STARTING>
####<Oct 3, 2009 6:13:44 PM GMT+05:30> <Warning> <oracle.adf.share.jndi.ReferenceStoreHelper> <d2i3pc002> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1254573824729> <BEA-000000> <Incomplete connection information>
####<Oct 3, 2009 6:13:44 PM GMT+05:30> <Warning> <oracle.adf.share.jndi.ReferenceStoreHelper> <d2i3pc002> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1254573824761> <BEA-000000> <Incomplete connection reference object >
####<Oct 3, 2009 6:13:46 PM GMT+05:30> <Notice> <Log Management> <d2i3pc002> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1254573826464> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
####<Oct 3, 2009 6:13:46 PM GMT+05:30> <Notice> <WebLogicServer> <d2i3pc002> <AdminServer> <main> <<WLS Kernel>> <> <> <1254573826557> <BEA-000365> <Server state changed to ADMIN>
####<Oct 3, 2009 6:13:46 PM GMT+05:30> <Notice> <WebLogicServer> <d2i3pc002> <AdminServer> <main> <<WLS Kernel>> <> <> <1254573826557> <BEA-000365> <Server state changed to RESUMING>
####<Oct 3, 2009 6:13:46 PM GMT+05:30> <Notice> <Server> <d2i3pc002> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1254573826604> <BEA-002613> <Channel "Default" is now listening on 192.168.1.63:7001 for protocols iiop, t3, ldap, snmp, http.>
####<Oct 3, 2009 6:13:46 PM GMT+05:30> <Notice> <Server> <d2i3pc002> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1254573826604> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
####<Oct 3, 2009 6:13:46 PM GMT+05:30> <Notice> <WebLogicServer> <d2i3pc002> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1254573826604> <BEA-000331> <Started WebLogic Admin Server "AdminServer" for domain "base_domain" running in Development Mode>
####<Oct 3, 2009 6:13:46 PM GMT+05:30> <Notice> <WebLogicServer> <d2i3pc002> <AdminServer> <main> <<WLS Kernel>> <> <> <1254573826636> <BEA-000360> <Server started in RUNNING mode>
####<Oct 3, 2009 6:13:46 PM GMT+05:30> <Notice> <WebLogicServer> <d2i3pc002> <AdminServer> <main> <<WLS Kernel>> <> <> <1254573826636> <BEA-000365> <Server state changed to RUNNING>
####<Oct 3, 2009 6:15:55 PM GMT+05:30> <Error> <org.apache.beehive.netui.pageflow.internal.AdapterManager> <d2i3pc002> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1254573955292> <BEA-000000> <ServletContainerAdapter manager not initialized correctly.>
####<Oct 3, 2009 6:16:31 PM GMT+05:30> <Error> <Console> <d2i3pc002> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1254573991120> <BEA-240003> <Console encountered the following error weblogic.security.providers.authentication.LDAPAtnDelegateException: [Security:090294]could not get connection
     at weblogic.security.providers.authentication.LDAPAtnDelegate.getConnection(LDAPAtnDelegate.java:3224)
     at weblogic.security.providers.authentication.LDAPAtnDelegate.listUsers(LDAPAtnDelegate.java:2248)
     at weblogic.security.providers.authentication.LDAPAuthenticatorImpl.listUsers(LDAPAuthenticatorImpl.java:178)
     at weblogic.security.providers.authentication.ActiveDirectoryAuthenticatorMBeanImpl.listUsers(ActiveDirectoryAuthenticatorMBeanImpl.java:225)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at weblogic.management.jmx.modelmbean.WLSModelMBean.invoke(WLSModelMBean.java:437)
     at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:836)
     at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:761)
     at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:449)
     at java.security.AccessController.doPrivileged(Native Method)
     at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:447)
     at weblogic.management.mbeanservers.internal.JMXContextInterceptor.invoke(JMXContextInterceptor.java:268)
     at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:449)
     at java.security.AccessController.doPrivileged(Native Method)
     at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:447)
     at weblogic.management.mbeanservers.internal.SecurityInterceptor.invoke(SecurityInterceptor.java:443)
     at weblogic.management.jmx.mbeanserver.WLSMBeanServer.invoke(WLSMBeanServer.java:314)
     at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$11$1.run(JMXConnectorSubjectForwarder.java:663)
     at java.security.AccessController.doPrivileged(Native Method)
     at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$11.run(JMXConnectorSubjectForwarder.java:661)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.invoke(JMXConnectorSubjectForwarder.java:654)
     at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1426)
     at javax.management.remote.rmi.RMIConnectionImpl.access$200(RMIConnectionImpl.java:72)
     at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1264)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1366)
     at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:788)
     at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
     at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:222)
     at javax.management.remote.rmi.RMIConnectionImpl_1031_WLStub.invoke(Unknown Source)
     at javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.invoke(RMIConnector.java:978)
     at weblogic.management.jmx.MBeanServerInvocationHandler.doInvoke(MBeanServerInvocationHandler.java:544)
     at weblogic.management.jmx.MBeanServerInvocationHandler.invoke(MBeanServerInvocationHandler.java:380)
     at $Proxy122.listUsers(Unknown Source)
     at com.bea.console.utils.security.UserUtils.getUsers(UserUtils.java:78)
     at com.bea.console.actions.security.users.UserTableAction.getCollection(UserTableAction.java:100)
     at com.bea.console.actions.security.ManagementBaseTableAction.execute(ManagementBaseTableAction.java:83)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044)
     at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:91)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116)
     at com.bea.console.internal.ConsolePageFlowRequestProcessor.processActionPerform(ConsolePageFlowRequestProcessor.java:262)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
     at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
     at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
     at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
     at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133)
     at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
     at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:686)
     at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.renderInternal(ScopedContentCommonSupport.java:266)
     at com.bea.portlet.adapter.scopedcontent.StrutsStubImpl.render(StrutsStubImpl.java:107)
     at com.bea.netuix.servlets.controls.content.NetuiContent.preRender(NetuiContent.java:292)
     at com.bea.netuix.nf.ControlLifecycle$6.visit(ControlLifecycle.java:428)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:727)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
     at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:146)
     at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
     at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
     at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:208)
     at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:162)
     at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
     at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
     at com.bea.netuix.servlets.manager.UIServlet.doGet(UIServlet.java:211)
     at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:196)
     at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at com.bea.console.utils.MBeanUtilsInitSingleFileServlet.service(MBeanUtilsInitSingleFileServlet.java:47)
     at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3588)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2200)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2106)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1428)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.reflect.InvocationTargetException
     at weblogic.security.providers.authentication.LDAPAtnDelegate$LDAPFactory.newInstance(LDAPAtnDelegate.java:3890)
     at weblogic.security.utils.Pool.newInstance(Pool.java:37)
     at weblogic.security.utils.Pool.getInstance(Pool.java:33)
     at weblogic.security.providers.authentication.LDAPAtnDelegate.getConnection(LDAPAtnDelegate.java:3219)
     ... 119 more
Caused by: netscape.ldap.LDAPException: error result (49); 80090308: LdapErr: DSID-0C090334, comment: AcceptSecurityContext error, data 525, vece
     at netscape.ldap.LDAPConnection.checkMsg(LDAPConnection.java:4871)
     at netscape.ldap.LDAPConnection.simpleBind(LDAPConnection.java:1766)
     at netscape.ldap.LDAPConnection.authenticate(LDAPConnection.java:1264)
     at netscape.ldap.LDAPConnection.authenticate(LDAPConnection.java:1273)
     at netscape.ldap.LDAPConnection.bind(LDAPConnection.java:1562)
     at weblogic.security.providers.authentication.LDAPAtnDelegate$LDAPFactory.newInstance(LDAPAtnDelegate.java:3860)
     ... 122 more
>
org.apache.beehive.netui.util.logging.logger error
why i am getting the error:
####<Oct 3, 2009 6:15:55 PM GMT+05:30> <Error> <org.apache.beehive.netui.pageflow.internal.AdapterManager> <d2i3pc002> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1254573955292> <BEA-000000> <ServletContainerAdapter manager not initialized correctly.>
can anyone help me to figure out wherer the problem is.
Sailaja

As for this error
at weblogic.security.providers.authentication.LDAPAtnDelegate.getConnection(LDAPAtnDelegate.java:3219)
... 119 more
Caused by: netscape.ldap.LDAPException: error result (49); 80090308: LdapErr: DSID-0C090334, comment: AcceptSecurityContext error, data 525, vece
It means the password for the principal is incorrect.. please try to connect to the LDAP Server from a stanalone client and verify..

OPMN Process Manager failed to start - libmodapi.so libclntsh.so not found

Hi all,
I am completely new to Oracle in its entirety. I am trying to install Oracle Enterprise Manager Grid Console 10.2.0.1.0 on Oracle Enterprise Linux 5.1 through the OUI using the new database install. When I get to setting up the Oracle Application Server, it tells me the OPMN Process Manager failed to start, tells me to check the logs in /oms10g/opmn/logs, and to start OPMN manually before hitting retry.
The log files in that directory do not seem to contain any errors.
When I run ./opmnctl stopall, ./opmnctl startall, ./opmnctl status, I get no obvious errors, and then the following:
DSA ~ DSA ~ Down
HTTP_Server ~ HTTPServer ~ Alive
LogLoader ~ logloaderd ~ Down
dcm-daemon ~ dcm-daemon ~ Down
OC4J ~ home ~ Alive
WebCache ~ WebCache ~ Alive
WebCache ~ WebCacheAdmin ~ Alive
When I do ./opmn start I get the following:
./opmn: error while loading shared libraries: libmodapi.so: cannot open shared object file: No such file or directory
When I do a ldd ./opmn I get the following errors:
libmodapi.so => not found
libclntsh.so.10.1 => not found
I am assuming my problem is that these two libraries are not linked in. I have looked through the forums, and found closely related threads, but none that seemed to help, most notably changing my PATH. If anyone has any suggestions, I would welcome them. Thanks for your help.
Sincerely,
Don

Hi All,
We all agree that best practice involves a test installation. My original post was about a problem I was having with the creation of my test bed. I did create my own manual, which I am sure is not the best manual ever created, but does work to get the software installed. If it is proven out, I will post it to try and return something to the community.
In order to do this, I needed to read thousands of pages of documentation so far, which does not even scratch the surface of the total amount on OTN. I am still revising my instructions as I find that the documentation commonly assumes the reader has been installing Oracle for some time and is fully aware of all the appropriate acronyms and the entire logical and physical structure of the database. In order to just read many of the documents, I had to draw out a map of Oracle on a whiteboard as I went. As a systems administrator, should I have to search through all those papers, manuals, the web, etc. and try to gain an advanced DBA understanding to get a working default installation? Perhaps it seems like I am just a new user who is whining, but how many programs can you think of where this type of effort is required?
In looking at the relationship between the DBA and the Systems Administrator, where should we draw a line between their tasks?
Should the DBA have to learn how to assess appropriate server hardware, and then install and administrate every flavor of Windows, UNIX, Linux, etc. in any given environment? Should a DBA be required to build a Linux kernel, configure Active Directory, or install Solaris before installing Oracle?
Should the Systems Administrator have to learn the nuances of installing and optimizing Oracle databases in order to just put the base software on the system and configure the kernel so it is ready for a DBA?
More interesting, as stated above, I could hand you the Gentoo Handbook, and without knowing a single thing about Gentoo Linux, you would have a default installation of the Gentoo OS. You could also grab step-by-step instructions for a default installation of MySQL on Gentoo, or a myriad of other programs, for that matter. This would hardly replace the Gentoo systems administrator or MySQL DBA, but it does serve a very valid purpose of enabling the systems administrator and DBA. Shouldn’t Oracle have something similar?
I would think the Systems Administrator knowledgeable in the OS and Kernel should be able to perform the first half of the installation task where they are more likely to be an expert, and then allow the DBA to create and optimize the databases they install, which they in turn can spend years learning how to do. Time that the DBA spends learning the OS or time the Systems Administrator spends learning Oracle is valuable in the long run, but it is also extra time to get the initial database up and running. One of the largest reasons IT personnel exist at all is to keep users from having to spend too much time learning about their computers to get their work done. Shouldn’t this also translate between IT groups?
Databases are one of the few software installations that systems administrators commonly don't have to maintain on corporate servers. The best comparison I know of is web services. In this manner web servers are very similar, and are commonly installed by a team as well. I am perfectly capable of creating a default install of Apache, Tomcat, or IIS from step-by-step instructions provided by Apache or Microsoft without much more tailored information than the IP address and system name we are going to use to fill in the blanks during the installation.
While I have performed the role of sole IT staff at a small software engineering company, and have therefore been the SysNetWebSecDB admin hydra in the past, in larger companies there seems to be no problem with having the system administrator create a default installation of Apache or IIS, having the network team configure the switches and DMZ, and having the web team customize the server and design the site without each of them having to know everything.
So the above is a good idea and I would encourage
them to do it because after that, it makes them
stonger than when they use an already completed one
to install.Sometimes there is time to sit down and read all the instructions and become a more robust IT professional. Sometimes there is only time to read the Getting Started section and you have to read the full instructions and optimize later if there is time. Sometimes you have outside influences that mean it has to get done in less time than it should, whether or not the justification for rushing is reasonable.
Should I plan to read every knowledge base article ever published by Microsoft in order to create a test bed installation of Windows 2008? Honestly, I’d still be reading the NT4 docs.
Not only does not every business have a DBA, or the money to hire one, sometimes the business does not want to do so, or sometimes the security is such that the DBA is not part of the unit allowed to utilize administrative access on the servers. That doesn’t mean they don’t need a database tomorrow.
As an IT professional, I will never be able to come close to encompassing the amount of knowledge I actually could use to do my job. I try to specialize in a few areas so that I have the ability to keep up with the exponential rate of IT expansion, but I basically consider a vast part of my job being constantly thrown into the deep end, and, fair or not, getting things done anyway. Hopefully that makes me good at my job. The question is how much time and effort I should need to apply before I can get to a reasonable starting point where everyone else can do their work too.
There
is normally no single document to achieve or complete
and installation unless the bespoke type. Apart from
the Install Guide, there could be Readme, Release
notes, Adendum etc. While I noted in a previous post that I shouldn't be too hard on Oracle in trying to document such a massive effort, that doesn’t mean that their documentation doesn’t need work. Why is the documentation for a single product spread out over tens of thousands of pages? It should be obvious that this has resulted in redundant and often conflicting documents, including the dozen readme documents in the installation files, the readme documents in the installed files, the install guide, the readme and addendum for each of those, the release notes for each of those, and a new set for each patch.
Obviously, for any installation, I need to complete a document for my own environment that contains the proper network configuration for our own LAN, or the proper partitioning. I do this for any program. Oracle needs me to change the name of the OS install to get their installer not to error out on their own OS. If OFA is so desirable, why not make the default install explain and follow OFA? Basic issues like this are highly avoidable, and shouldn’t be seen by the end user, even if in this case the end user is a highly technical audience capable of adjusting.
It will hard to get a single document because they
will be platform dependent and what someone did in
their install, may not always work everywhere.Again, please note that Oracle has "released" an OS that they intend for people to use on their Oracle validated hardware as a premier platform for their Oracle database. It isn't a stretch to feel that Oracle should then be able to provide valid, step-by-step instructions for a default installation of their own software, on validated hardware, on their own OS. I’m not expecting an optimized and populated database, but if the hardware, OS, and software are all under Oracle’s control, there aren’t really any variables other than machine name and IP address for a default install.
Hopefully my current knowledge will work for the time being, and I will be able to optimize appropriately in the future as I can.

Process Manager is not initialized

Similar Messages

Maybe you are looking for