Process Manager Vrs Performance Meter

Does anyone know the differences between the Process Manager and the Performance Meter. I am running both at the same time on the same system and I am getting completely different values for CPU% usage. The Performance Meter always seems to be much higher than that of the Process Manager. 40% to 10%. I have the time sample set to the same amount of time for each, and I am completely stumped as to why there is such a differnce. I wich I knew what the Performance Meter was measurring, and why it is so much higher. Any ideas? Thanks

Well I didn't post an exhaustive list of possibilities. Here's the macupdate link for Renicer. Look further down the page at the Similar Software section. There are other possibilities there. Maybe you find a free one you like.
Note, you could always encpsulate the renice terminal command if you have the knowledge to do it that way.

Similar Messages

Problem to start BPEL Console of Oracle BPEL Process Manager 10.1.3.1.0

Hi everyone!
I'm writing to yours because I installed Oracle BPEL Process Manager 10.1.3.1.0 but I can't start BPEL Console. I tried to start it by the option menu of Windows XP and by Developer Prompt, but I get a HTTP 404 Not Found page. When I was installing the universall installer told me that it wasn't possible to set ORACLE_HOME variable because it had a value older than 1023 characteres. So, I continue the installation but I can't start the BPEL Console. The Dos Console teld me sometimes when I put http://localhost:9700/BPELConsole..timed out. So, tell me how to resolve that problem.
I'll be waiting your responses.
This is the log of "Select Start BPEL PM Server",
Could not canonicalize 'ERROR: product bean SAWebBinCompBean does not exist' (Th
e filename, directory name, or volume label syntax is incorrect). From system pr
operty java.library.path.
Could not canonicalize 'ERROR: product bean EclipseSACatalogMangerCompBean does
not exist' (The filename, directory name, or volume label syntax is incorrect).
From system property java.library.path.
Could not canonicalize 'ERROR: product bean SQLAnywhereOdbcDriverCompBean does n
ot exist' (The filename, directory name, or volume label syntax is incorrect). F
rom system property java.library.path.
Could not canonicalize 'ERROR: product bean DWSharedUtilityCompBean does not exi
st' (The filename, directory name, or volume label syntax is incorrect). From sy
stem property java.library.path.
Jul 15, 2007 12:48:36 PM com.evermind.server.XMLDataSourcesConfig parseRootNode
INFO: Legacy datasource detected...attempting to convert to new syntax.
2007-07-15 12:48:45.378 NOTIFICATION JMSServer[]: OC4J JMS server recovering tra
nsactions (commit 0) (rollback 0) (prepared 0).
2007-07-15 12:48:45.408 NOTIFICATION JMSServer[]: OC4J JMS server recovering loc
al transactions Queue[OC4J Domain Queue].
2007-07-15 12:48:45.448 NOTIFICATION JMSServer[]: OC4J JMS server recovering loc
al transactions Queue[jms/Oc4jJmsExceptionQueue].
2007-07-15 12:48:45.628 NOTIFICATION JMSServer[]: OC4J JMS server recovering loc
al transactions Queue[jms/notifications].
2007-07-15 12:48:45.649 NOTIFICATION JMSServer[]: OC4J JMS server recovering loc
al transactions Queue[OracleASRouter_store].
2007-07-15 12:48:45.959 NOTIFICATION JMSServer[]: OC4J JMS server recovering loc
al transactions Queue[jms/events].
2007-07-15 12:48:46.049 NOTIFICATION JMSServer[]: OC4J JMS server recovering loc
al transactions Queue[jms/jobstore].
2007-07-15 12:48:46.149 ERROR Failed to set the internal configuration of the OC
4J JMS Server with: XMLJMSServerConfig[file:/C:/product/10.1.3.1/OraBPEL_1/bpel/
system/appserver/oc4j/j2ee/home/config/jms.xml]
07/07/15 12:48:46 *** (SEVERE) Failed to set the internal configuration of the O
C4J JMS Server with: XMLJMSServerConfig[file:/C:/product/10.1.3.1/OraBPEL_1/bpel
/system/appserver/oc4j/j2ee/home/config/jms.xml]
2007-07-15 12:48:46.149 ERROR J2EE OJR-00011 Exception starting JMS server: Fail
ed to set the internal configuration of the OC4J JMS Server with: XMLJMSServerCo
nfig[file:/C:/product/10.1.3.1/OraBPEL_1/bpel/system/appserver/oc4j/j2ee/home/co
nfig/jms.xml]
2007-07-15 12:49:29.952 WARNING J2EE JNDI-00002 Resource reference jms/Queue/Not
ificationSenderQueueConnectionFactory not found. Allowing J2EEContext creation
to continue anyway.
2007-07-15 12:49:29.962 WARNING J2EE JNDI-00004 No javax.jms.QueueConnectionFact
ory found at jms/QueueConnectionFactory
2007-07-15 12:49:29.962 WARNING J2EE JNDI-00002 Resource reference jms/Queue/Not
ificationSenderQueue not found. Allowing J2EEContext creation to continue anywa
y.
2007-07-15 12:49:29.962 WARNING J2EE JNDI-00004 No javax.jms.Queue found at null
2007-07-15 12:49:29.962 WARNING J2EE JNDI-00002 Resource reference jms/Queue/Not
ificationSenderQueueConnectionFactory not found. Allowing J2EEContext creation
to continue anyway.
2007-07-15 12:49:29.972 WARNING J2EE JNDI-00004 No javax.jms.QueueConnectionFact
ory found at jms/QueueConnectionFactory
2007-07-15 12:49:29.982 WARNING J2EE JNDI-00002 Resource reference jms/Queue/Not
ificationSenderQueue not found. Allowing J2EEContext creation to continue anywa
y.
2007-07-15 12:49:29.982 WARNING J2EE JNDI-00004 No javax.jms.Queue found at null
2007-07-15 12:49:30.112 ERROR J2EE EJB-03027 [orabpel] An error occured deployin
g EJB module: java.lang.InstantiationException: Resource exception(BPELjms) for
MessageDrivenBean InvokerBean during endpoint activation: failure looking up res
ource provider factory for QueueConnectionFactoryWrapper [Queue]-OracleASJMSConn
ector.QueueConnectionFactoryWrapper.Demos7.-3f9cb723:113ca91421c:-7fff.22 []: ja
vax.resource.spi.ResourceAdapterInternalException: Looking up java:comp/resource
/oc4jjms/jms/collaxa/BPELInvokerQueueFactory: javax.naming.NameNotFoundException
: No resource named 'oc4jjms/jms/collaxa/BPELInvokerQueueFactory'found
07/07/15 12:49:30 WARNING: Application.setConfig Application: orabpel is in fail
ed state as initialization failed.
java.lang.InstantiationException: Error initializing ejb-modules: Resource excep
tion(BPELjms) for MessageDrivenBean InvokerBean during endpoint activation: fail
ure looking up resource provider factory for QueueConnectionFactoryWrapper [Queu
e]-OracleASJMSConnector.QueueConnectionFactoryWrapper.Demos7.-3f9cb723:113ca9142
1c:-7fff.22 []: javax.resource.spi.ResourceAdapterInternalException: Looking up
java:comp/resource/oc4jjms/jms/collaxa/BPELInvokerQueueFactory: javax.naming.Nam
eNotFoundException: No resource named 'oc4jjms/jms/collaxa/BPELInvokerQueueFacto
ry'found
2007-07-15 12:49:30.513 WARNING DEBUG GJRA-1100, oracle.j2ee.connector.messagein
flow.MessageEndpointFactoryImpl@121c5df.
2007-07-15 12:49:30.763 WARNING J2EE OJR-00013 Exception initializing deployed a
pplication: orabpel. Application: orabpel is in failed state as initialization f
ailed
2007-07-15 12:49:31.374 ERROR J2EE EJB-03027 [hw_services] An error occured depl
oying EJB module: com.evermind.server.ejb.deployment.InvalidEJBAssemblyException
: [hw_services:hw_services_ejb:RemoteWorklistService] - Unable to load ejb-class
oracle.tip.pc.services.hw.worklist.RemoteWorklistServiceBean, see section 23.2
of the EJB 2.1 specificationoracle.classloader.util.AnnotatedClassNotFoundExcept
ion:
Missing class: oracle.tip.pc.services.hw.worklist.RemoteWorklistServic
eBean
Dependent class: com.evermind.server.ejb.deployment.BeanDescriptor
Loader: oc4j:10.1.3
Code-Source: /C:/product/10.1.3.1/OraBPEL_1/bpel/system/appserver/oc
4j/j2ee/home/lib/oc4j-internal.jar
Configuration: <code-source> in META-INF/boot.xml in C:\product\10.1.3
.1\OraBPEL_1\bpel\system\appserver\oc4j\j2ee\home\oc4j.jar
This load was initiated at hw_services.root:0.0.0 using the Class.forName() meth
od.
The missing class is available from the following locations:
1. Code-Source: /C:/product/10.1.3.1/OraBPEL_1/bpel/system/services/lib/
bpm-services.jar (from <code-source> in /C:/product/10.1.3.1/OraBPEL_1/bpel/syst
em/appserver/oc4j/j2ee/home/config/server.xml)
This code-source is available in loader oracle.bpel.common:10.1.3. Th
is shared-library can be imported by the "hw_services" application.
07/07/15 12:49:31 WARNING: Application.setConfig Application: hw_services is in
failed state as initialization failed.
java.lang.InstantiationException: Error initializing ejb-modules: [hw_services:h
w_services_ejb:RemoteWorklistService] - Unable to load ejb-class oracle.tip.pc.s
ervices.hw.worklist.RemoteWorklistServiceBean, see section 23.2 of the EJB 2.1 s
pecificationoracle.classloader.util.AnnotatedClassNotFoundException:
Missing class: oracle.tip.pc.services.hw.worklist.RemoteWorklistServic
eBean
Dependent class: com.evermind.server.ejb.deployment.BeanDescriptor
Loader: oc4j:10.1.3
Code-Source: /C:/product/10.1.3.1/OraBPEL_1/bpel/system/appserver/oc
4j/j2ee/home/lib/oc4j-internal.jar
Configuration: <code-source> in META-INF/boot.xml in C:\product\10.1.3
.1\OraBPEL_1\bpel\system\appserver\oc4j\j2ee\home\oc4j.jar
This load was initiated at hw_services.root:0.0.0 using the Class.forName() meth
od.
The missing class is available from the following locations:
1. Code-Source: /C:/product/10.1.3.1/OraBPEL_1/bpel/system/services/lib/
bpm-services.jar (from <code-source> in /C:/product/10.1.3.1/OraBPEL_1/bpel/syst
em/appserver/oc4j/j2ee/home/config/server.xml)
This code-source is available in loader oracle.bpel.common:10.1.3. Th
is shared-library can be imported by the "hw_services" application.
2007-07-15 12:49:31.394 WARNING J2EE OJR-00013 Exception initializing deployed a
pplication: hw_services. Application: hw_services is in failed state as initiali
zation failed
2007-07-15 12:49:31.534 ERROR J2EE EJB-03027 [owf] An error occured deploying EJ
B module: com.evermind.server.ejb.deployment.InvalidEJBAssemblyException: [owf:O
WFWrapperEJB:OWFRemoteWrapper] - Unable to load ejb-class oracle.tip.pc.services
.owf.OWFRemoteWrapperBean, see section 23.2 of the EJB 2.1 specificationoracle.c
lassloader.util.AnnotatedClassNotFoundException:
Missing class: oracle.tip.pc.services.owf.OWFRemoteWrapperBean
Dependent class: com.evermind.server.ejb.deployment.BeanDescriptor
Loader: oc4j:10.1.3
Code-Source: /C:/product/10.1.3.1/OraBPEL_1/bpel/system/appserver/oc
4j/j2ee/home/lib/oc4j-internal.jar
Configuration: <code-source> in META-INF/boot.xml in C:\product\10.1.3
.1\OraBPEL_1\bpel\system\appserver\oc4j\j2ee\home\oc4j.jar
This load was initiated at owf.root:0.0.0 using the Class.forName() method.
The missing class is available from the following locations:
1. Code-Source: /C:/product/10.1.3.1/OraBPEL_1/bpel/system/services/lib/
bpm-services.jar (from <code-source> in /C:/product/10.1.3.1/OraBPEL_1/bpel/syst
em/appserver/oc4j/j2ee/home/config/server.xml)
This code-source is available in loader oracle.bpel.common:10.1.3. Th
is shared-library can be imported by the "owf" application.
07/07/15 12:49:31 WARNING: Application.setConfig Application: owf is in failed s
tate as initialization failed.
java.lang.InstantiationException: Error initializing ejb-modules: [owf:OWFWrappe
rEJB:OWFRemoteWrapper] - Unable to load ejb-class oracle.tip.pc.services.owf.OWF
RemoteWrapperBean, see section 23.2 of the EJB 2.1 specificationoracle.classload
er.util.AnnotatedClassNotFoundException:
Missing class: oracle.tip.pc.services.owf.OWFRemoteWrapperBean
Dependent class: com.evermind.server.ejb.deployment.BeanDescriptor
Loader: oc4j:10.1.3
Code-Source: /C:/product/10.1.3.1/OraBPEL_1/bpel/system/appserver/oc
4j/j2ee/home/lib/oc4j-internal.jar
Configuration: <code-source> in META-INF/boot.xml in C:\product\10.1.3
.1\OraBPEL_1\bpel\system\appserver\oc4j\j2ee\home\oc4j.jar
This load was initiated at owf.root:0.0.0 using the Class.forName() method.
The missing class is available from the following locations:
1. Code-Source: /C:/product/10.1.3.1/OraBPEL_1/bpel/system/services/lib/
bpm-services.jar (from <code-source> in /C:/product/10.1.3.1/OraBPEL_1/bpel/syst
em/appserver/oc4j/j2ee/home/config/server.xml)
This code-source is available in loader oracle.bpel.common:10.1.3. Th
is shared-library can be imported by the "owf" application.
2007-07-15 12:49:31.544 WARNING J2EE OJR-00013 Exception initializing deployed a
pplication: owf. Application: owf is in failed state as initialization failed
2007-07-15 12:50:07.096 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: admin_war defined in web site OC4J 10g (10.1.3) Defau
lt Web Site. Application: admin_war has been stopped
2007-07-15 12:50:07.096 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: console_war defined in web site OC4J 10g (10.1.3) Def
ault Web Site. Application: console_war has been stopped
2007-07-15 12:50:07.246 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: startup_war defined in web site OC4J 10g (10.1.3) Def
ault Web Site. Application: startup_war has been stopped
2007-07-15 12:50:07.386 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: httpbinding defined in web site OC4J 10g (10.1.3) Def
ault Web Site. Application: httpbinding has been stopped
2007-07-15 12:50:26.003 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: deploy defined in web site OC4J 10g (10.1.3) Default
Web Site. Application: deploy has been stopped
2007-07-15 12:50:26.013 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: testconnection defined in web site OC4J 10g (10.1.3)
Default Web Site. Application: testconnection has been stopped
2007-07-15 12:50:26.023 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: taskservice defined in web site OC4J 10g (10.1.3) Def
ault Web Site. Application: taskservice has been stopped
2007-07-15 12:50:26.033 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: taskmetadataservice defined in web site OC4J 10g (10.
1.3) Default Web Site. Application: taskmetadataservice has been stopped
2007-07-15 12:50:26.033 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: taskqueryservice defined in web site OC4J 10g (10.1.3
) Default Web Site. Application: taskqueryservice has been stopped
2007-07-15 12:50:26.033 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: IdentityService defined in web site OC4J 10g (10.1.3)
Default Web Site. Application: IdentityService has been stopped
2007-07-15 12:50:26.033 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: usermetadataservice defined in web site OC4J 10g (10.
1.3) Default Web Site. Application: usermetadataservice has been stopped
2007-07-15 12:50:26.043 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: runtimeconfigservice defined in web site OC4J 10g (10
.1.3) Default Web Site. Application: runtimeconfigservice has been stopped
2007-07-15 12:50:26.043 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: hw_services defined in web site OC4J 10g (10.1.3) Def
ault Web Site. Application: hw_services has been stopped
2007-07-15 12:50:26.043 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: worklistxpress defined in web site OC4J 10g (10.1.3)
Default Web Site. Application: worklistxpress has been stopped
2007-07-15 12:50:26.043 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: worklistapp defined in web site OC4J 10g (10.1.3) Def
ault Web Site. Application: worklistapp has been stopped
2007-07-15 12:50:26.043 ERROR J2EE HTTP-00004 Internal error raised tyring to in
stantiate web-application: owf defined in web site OC4J 10g (10.1.3) Default Web
Site. Application: owf has been stopped
07/07/15 12:50:36 Oracle Containers for J2EE 10g (10.1.3.1.0) initialized
Thanks for your responses.
Greetings.

Hi,
you said:
it wasn't possible to set ORACLE_HOME variable because it had a value older than 1023 characteres
What do you mean with older than 1023 chars?
I think the easiest way is to uninstall the BPEL Console and run the installer again with correcting the ORACLE_HOME problem...

11.1.2 Oracle Process Manager - start error

Hi,
i start EPM system batch file, the Oracle Process Manager (EPM_epmsystem1) service did not start, i found this in starter.log.
First time after installation the service went up without any problems.
start:
[starter] oracle.as.management.opmn.optic.OpticException: Error in starting opmn server
[starter] Operation aborted because of a parse error or bad value specified in opmn.xml
[starter]      at oracle.as.management.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:310)
[starter]      at oracle.as.management.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:87)
[starter]      at com.hyperion.cis.ant.starter.OPMNStarter.startAndReloadOpmnCtl(OPMNStarter.java:174)
[starter]      at com.hyperion.cis.ant.starter.OPMNStarter.init(OPMNStarter.java:47)
[starter]      at com.hyperion.cis.ant.starter.StarterEngine.load(StarterEngine.java:129)
[starter]      at com.hyperion.cis.ant.starter.StarterEngine.execute(StarterEngine.java:103)
[starter]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
[starter]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[starter]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[starter]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[starter]      at java.lang.reflect.Method.invoke(Method.java:597)
[starter]      at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
[starter]      at org.apache.tools.ant.Task.perform(Task.java:348)
[starter]      at org.apache.tools.ant.Target.execute(Target.java:357)
[starter]      at org.apache.tools.ant.Target.performTasks(Target.java:385)
[starter]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
[starter]      at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
[starter]      at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
[starter]      at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
[starter]      at org.apache.tools.ant.Main.runBuild(Main.java:698)
[starter]      at org.apache.tools.ant.Main.startAnt(Main.java:199)
[starter]      at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
[starter]      at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
[starter] Components sequence: [[AnalyticProviderServices.properties, BPMS_bpms1_Server.properties, CalcMgr.properties, EIS.properties, EisServer.properties, EpmaDataSync.properties, EpmaWebReports.properties, Essbase.properties, EssbaseAdminServices.properties, FoundationServices.properties, OHS.properties, Planning.properties, ProcessManager.properties, RMI.properties, RaFramework.properties, RaFrameworkAgent.properties, ocm.properties]]
[starter] Starting component: FoundationServices.properties
[starter] Selected starter: com.hyperion.cis.ant.starter.ServiceStarter@193a66f[name=HyS9FoundationServices,checker=com.hyperion.cis.ant.starter.checkers.J2eeChecker@c9131c,engine=<null>,id=<null>,type=<null>,waitFor=true,running=false,timeout=500000,interval=5000,softDependency=[],strongDependency=[],isExecuted=false]
[starter] Start time: Thu May 13 10:01:48 CEST 2010
[starter] End time: Thu May 13 10:03:30 CEST 2010. Delay : 101937ms
[starter] Starting component: AnalyticProviderServices.properties
[starter] Selected starter: com.hyperion.cis.ant.starter.ServiceStarter@1ec8909[name=HyS9aps,checker=com.hyperion.cis.ant.starter.checkers.J2eeChecker@18c56d,engine=<null>,id=<null>,type=<null>,waitFor=true,running=false,timeout=500000,interval=5000,softDependency=[FoundationServices.properties],strongDependency=[],isExecuted=false]
[starter] Start time: Thu May 13 10:03:32 CEST 2010
[starter] End time: Thu May 13 10:05:01 CEST 2010. Delay : 89688ms

Hi,
i start EPM system batch file, the Oracle Process Manager (EPM_epmsystem1) service did not start, i found this in starter.log.
First time after installation the service went up without any problems.
start:
[starter] oracle.as.management.opmn.optic.OpticException: Error in starting opmn server
[starter] Operation aborted because of a parse error or bad value specified in opmn.xml
[starter]      at oracle.as.management.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:310)
[starter]      at oracle.as.management.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:87)
[starter]      at com.hyperion.cis.ant.starter.OPMNStarter.startAndReloadOpmnCtl(OPMNStarter.java:174)
[starter]      at com.hyperion.cis.ant.starter.OPMNStarter.init(OPMNStarter.java:47)
[starter]      at com.hyperion.cis.ant.starter.StarterEngine.load(StarterEngine.java:129)
[starter]      at com.hyperion.cis.ant.starter.StarterEngine.execute(StarterEngine.java:103)
[starter]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
[starter]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[starter]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[starter]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[starter]      at java.lang.reflect.Method.invoke(Method.java:597)
[starter]      at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
[starter]      at org.apache.tools.ant.Task.perform(Task.java:348)
[starter]      at org.apache.tools.ant.Target.execute(Target.java:357)
[starter]      at org.apache.tools.ant.Target.performTasks(Target.java:385)
[starter]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
[starter]      at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
[starter]      at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
[starter]      at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
[starter]      at org.apache.tools.ant.Main.runBuild(Main.java:698)
[starter]      at org.apache.tools.ant.Main.startAnt(Main.java:199)
[starter]      at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
[starter]      at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
[starter] Components sequence: [[AnalyticProviderServices.properties, BPMS_bpms1_Server.properties, CalcMgr.properties, EIS.properties, EisServer.properties, EpmaDataSync.properties, EpmaWebReports.properties, Essbase.properties, EssbaseAdminServices.properties, FoundationServices.properties, OHS.properties, Planning.properties, ProcessManager.properties, RMI.properties, RaFramework.properties, RaFrameworkAgent.properties, ocm.properties]]
[starter] Starting component: FoundationServices.properties
[starter] Selected starter: com.hyperion.cis.ant.starter.ServiceStarter@193a66f[name=HyS9FoundationServices,checker=com.hyperion.cis.ant.starter.checkers.J2eeChecker@c9131c,engine=<null>,id=<null>,type=<null>,waitFor=true,running=false,timeout=500000,interval=5000,softDependency=[],strongDependency=[],isExecuted=false]
[starter] Start time: Thu May 13 10:01:48 CEST 2010
[starter] End time: Thu May 13 10:03:30 CEST 2010. Delay : 101937ms
[starter] Starting component: AnalyticProviderServices.properties
[starter] Selected starter: com.hyperion.cis.ant.starter.ServiceStarter@1ec8909[name=HyS9aps,checker=com.hyperion.cis.ant.starter.checkers.J2eeChecker@18c56d,engine=<null>,id=<null>,type=<null>,waitFor=true,running=false,timeout=500000,interval=5000,softDependency=[FoundationServices.properties],strongDependency=[],isExecuted=false]
[starter] Start time: Thu May 13 10:03:32 CEST 2010
[starter] End time: Thu May 13 10:05:01 CEST 2010. Delay : 89688ms

Not able to start EPM Architect Process Manager.

I have installed Hyperion 11.1.1.3 and when i am trying to start the EPM Architect Process Manager Service i am getting the below error message.
The Hyperion EPM Architect - ProcessManager service on local Computer started and then stopped
Some services stop automatically if they have no work to do, for example, the performance Logs and Alerts Service.
I have also checked the Event Viewer and the below is what is logged into the event viewer.
Service cannot be started. Hyperion.DimensionServer.ProcessManager.Interface.ProcessManagerException: Cannot initialize the Session Manager. ---> System.InvalidOperationException: Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed. ---> System.BadImageFormatException: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
at System.Data.Common.UnsafeNativeMethods.OCILobCopy2(IntPtr svchp, IntPtr errhp, IntPtr dst_locp, IntPtr src_locp, UInt64 amount, UInt64 dst_offset, UInt64 src_offset)
at System.Data.OracleClient.OCI.DetermineClientVersion()
--- End of inner exception stack trace ---
at System.Data.OracleClient.OCI.DetermineClientVersion()
at System.Data.OracleClient.OracleInternalConnection.OpenOnLocalTransaction(String userName, String password, String serverName, Boolean integratedSecurity, Boolean unicode, Boolean omitOracleConnectionName)
I have also tried to start Hyperion EPM Architect - .Net JNI Bridge which i am able to start sucessfully howerver when i try to start the EPM Architect - Process manager i am getting the above error.
I have also tried to directly login into http://localhost:19091/awb and i am getting the below error.
Loading the Module 'awb.appcontainer' failed
Kindly help me out.

Hello, I have found the solution in my environment.
All Hyperion softwares will run on a x64 bit OS with x64 bit Oraclle client installed except FDM. I tried to run everything through Oracle x32 bit client and everything worked except EPMA, I received errors in the eventvwr that stated it could not run against a x32 bit Client. On my FDM server (w2k3 x64 bit) I had to install Oracle x32 bit client in order for me to get my FDM server fully functional.
thank you.

EPMA process manager service is not starting

Hi gurus,
I'm working on Hyperion v-11.1.1.3 and in that i'm not able to start the EPMA process manager.It is throwing an error message as
The Hyperion EPM Architect - ProcessManager service on local Computer started and then stopped
Some services stop automatically if they have no work to do, for example, the performance Logs and Alerts Service.
When checking in the dimension server logs/eventvwr it is showing the following error message. But some times it is showing 1053 error message that-the process manager is not starting in a timely etc..
*[Engine Startup] Hyperion.DimensionServer.Program.LogMessage(:0) - An error occurred during initialization of engine ID 1: ORA-01115: IO error reading block from file 4 (block # 782666)*
ORA-15081: failed to submit an I/O operation to a disk
ORA-15081: failed to submit an I/O operation to a disk
ORA-01115: IO error reading block from file 4 (block # 782666)
ORA-15081: failed to submit an I/O operation to a disk
ORA-15081: failed to submit an I/O operation to a disk
System.Data.OracleClient.OracleException: ORA-01115: IO error reading block from file 4 (block # 782666)
ORA-15081: failed to submit an I/O operation to a disk
ORA-15081: failed to submit an I/O operation to a disk
ORA-01115: IO error reading block from file 4 (block # 782666)
ORA-15081: failed to submit an I/O operation to a disk
ORA-15081: failed to submit an I/O operation to a disk
at System.Data.OracleClient.OracleConnection.CheckError(OciErrorHandle errorHandle, Int32 rc)
at System.Data.OracleClient.OracleLob.Read(Byte[] buffer, Int32 offset, Int32 count)
at System.IO.StreamReader.ReadBuffer()
at System.IO.StreamReader.ReadToEnd()
at System.Data.OracleClient.OracleLob.get_Value()
at System.Data.OracleClient.OracleColumn.GetValue(NativeBuffer_RowBuffer buffer)
at System.Data.OracleClient.OracleDataReader.GetValue(Int32 i)
at Hyperion.DataAccessLayerCore.DALDatasetCommand.ColumnValue(Int32 index)
at Hyperion.DataAccessLayerCore.DALRowset`1.Read()
at Hyperion.DataAccessLayerCore.DALRowset`1.Execute()
at Hyperion.DataAccessLayerCore.SelectCommand`1.Execute(Action`1 callback)
*at Hyperion.DataAccessLayerCore.GenericDAO.Select[T](Action`1 callback, SetParamsEvent`1 onSetParams)*
at Hyperion.DimensionServer.DAO.DimensionPropertyManagerDAO.LoadDimensionMemberMemoProperties(Int32 libraryID, Int32 dimensionID, Action`1 action)
at Hyperion.DimensionServer.PropertyManager.LoadDimension(Dimension dimension)
at Hyperion.DimensionServer.PropertyManager.LoadProperties()
at Hyperion.DimensionServer.Library.Load()
at Hyperion.DimensionServer.Global.Initialize(String jobManagerConnectString)
at Hyperion.DimensionServer.Program.Main(String[] args)
What could be the reason for the issue and the possible resolution.I have checked in other posts in the forum but unable figure out resolution.
If it is related to Oracle client issue then where can we find out the installed oracle client in the server?
Thanks in advance

Hi John,
Thanks for the information..i have checked and came to know that the db server is down.
It is working fine now.
Could you please let me know..what all the services will not be available if Process manager service is not started?
Thanks in advance

Business process management

Greetings all
Hello everybody ! Whats going on? Today i am going to tell you something most important thing about business process management. Its help to growing your business market. If you wish to know more i can suggest you a site. The site is leading Business Process Managementsolution for faster and flexible
process automation. A powerful yet intuitive BPM Suite designed to make your business more agile.
So if you want to know more about business processes management please there site. Thank you all.
Edited by: 1005811 on May 14, 2013 4:32 AM

Does Bizagi have the capability to perform simulation prior to deployment?
Can Bizagi perform the process prior to deployment similar to Oracle BPM Process Player feature?

Unable to Restart EPM Architecht Process Manager

Hi.
It's the second time i have this problem.
I can't restart EPM Architect Process manager because this message block the start of the service :
The Hyperion S9 EPM Architect Process Manager service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example the Performance Log and Alert Services.
Obviously the same error appears if i try to start S9 EPM Engine Manage, S9 EPM Event Manager and S9 EPM Job Manager.
The first time i had this problem, a consultant of Hyperion from Manchester was unable to solve the problem after a remote connession on my server.
He suggested to reinstall Planning.
But now I can't reinstall it because i lose all!
Could you help me?
Thanks
Bye Bye

How's Life? What's news?

Cannot Start EPM Architect Process Manager after a Power Failure

Hey All,
We had a power failure in the office last night/this morning. We have two environments, and luckily, our production environment seems to be working OK, however, on our development environment, we cannot get the EPM Architect Process Manager to start (or any of the associated services).
Here is what we have tried already:
- Restarting the server
- Restarting all services in the correct order
- Running EPM System Configurator for Performance Management Architect > Configure Database (the first time, we just re-used the same tables, and had the same error. We did it a second time and dropped the tables and were able to get the service (and all other EPMA services) to start, but we couldn't get into the Application or Dimension Library.
- Restoring the EPMA DB schema from backup from two nights ago - same error when trying to restart the service.
We are running 11.1.1.3 (04 patches for Planning and CalcManager, but not EPMA). We are running MS SQL 2005 for the relational databases.
Error message when restarting the service:
"The Hyperion EPM Architect - Process Manager service on Local Computer started and then stopped. Some services stop automatically..."
When we go to the event viewer, it tells us:
Service cannot be started. Hyperion.DimensionServer.ProcessManager.Interface.ProcessManagerException: Dimension Server started but failed to initialize on machine CSHMISHYPTST. Check the error log on that machine.
at Hyperion.DimensionServer.ProcessManager.EngineManager.StartEngine(Machine machine, EngineType engineType)
at Hyperion.DimensionServer.ProcessManager.EngineManager.InitializeReadWriteEngine()
at Hyperion.DimensionServer.ProcessManager.EngineManager.Load()
at Hyperion.DimensionServer.ProcessManager.ProcessManager.Initialize()
at Hyperion.DimensionServer.ProcessManager.Service.OnStart(String[] args)
at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
Went into D:\Hyperion\logs\epma and looked at the "dimension_server.log":
2010-09-21 12:45:08,939 [Engine Startup] Hyperion.DimensionServer.Program.LogMessage(:0) - An error occurred during initialization of engine ID 1: Object reference not set to an instance of an object..
System.NullReferenceException: Object reference not set to an instance of an object.
at Hyperion.DimensionServer.RelationshipMemberList.Add(RelationshipMember item)
at Hyperion.DimensionServer.Dimension.<LoadSharedMembers>b__11(RelationshipRecord relationship)
at Hyperion.DataAccessLayerCore.DALRowset`1.Read()
at Hyperion.DataAccessLayerCore.SelectCommand`1.Execute(Action`1 callback)
at Hyperion.DataAccessLayerCore.GenericDAO.Select[T](Action`1 callback, SetParamsEvent`1 onSetParams)
at Hyperion.DimensionServer.DAO.DimensionDAO.LoadRelationships(Int32 libraryID, Int32 dimensionID, Boolean primary, Action`1 action)
at Hyperion.DimensionServer.DAO.DimensionDAO.LoadSharedMembers(Int32 libraryID, Int32 dimensionID, Action`1 action)
at Hyperion.DimensionServer.Dimension.LoadSharedMembers()
at Hyperion.DimensionServer.Dimension.LoadMembers()
at Hyperion.DimensionServer.Library.Load()
at Hyperion.DimensionServer.Global.Initialize(String jobManagerConnectString)
at Hyperion.DimensionServer.Program.Main(String[] args)
Looking for some suggestions or ideas. Have tried searching the forums and Google, but haven't had any success.

Ironically I just got alerted by Oracle that EPMA patch 03 had been pulled from the MOS site and replaced by patch 04.
You are receiving this notification because our records indicate that you have downloaded Oracle Hyperion Enterprise Performance Management Architect 11.1.1.3.03 Service Fix – Patch 9650100.
Please be advised that Oracle Hyperion Enterprise Performance Management Architect 11.1.1.3.03 Service Fix - Patch 9650100 has been removed from My Oracle Support and is superseded by Oracle Hyperion Enterprise Performance Management Architect 11.1.1.3.04 Service Pack – Patch 9800827.
Patch 9650100 is now obsolete and you should use Oracle Hyperion Enterprise Performance Management Architect 11.1.1.3.04 Service Pack - Patch 9800827, which corrects file packaging issues, from My Oracle Support (https://support.oracle.com) instead.
Please thoroughly review the Readme for Oracle Hyperion Enterprise Performance Management Architect 11.1.1.3.04 Service Pack - Patch 9800827 prior to implementing.
Best regards,
Chris

S9 EPM Architect Process Manager fails to start.

Hi All,
     I just tried doing Hyperion System9 installation and am encountering a problem.
     The Problem is, Installations are all done and the Configuration also seems to be
     fine as i get to know from seeing the Configuration utility window, but once i am done with
     configuring the Performance Management Architect, i tried starting the
     Hyperion S9 EPM Architect Process Manager and it was not starting,even i tried increasing the
     timeout setting for the startup of the dimension Server in the BPMA_Server_Config.xml file.Still
     it failed in starting..
     Other than all the steps mentioned in the doc,Few steps i skipped during the Planning Installation was,
     1.I didnt check the Activate instance option while creating the Planning Instance
     2.I didnt Increase the Heap Size of App Server.
     So could someone please suggest on what is creating the Problem during the startup.

Hi,
For more detailed information on why it is not starting have a look in windows event log. In windows go to administrative tools > event viewer > application
Double click HyS9BPMA_ProcessManager and there should be a more detailed description in the window.
e.g. Service cannot be started. Hyperion.DimensionServer.ProcessManager.Interface.ProcessManagerException: Process Manager could not start because database connectivity could not be established. --->
Cheers
John
http://john-goodwin.blogspot.com/

HYPERION S9 EPM ARCHITECT PROCESS MANAGER ERROR!

Hi There
I have problem while starting Hyperion s9 EPM Architect process manager its giving error while startingup services
The HYPERION S9 epm architect process manager service on local computer started and then stopped.Some services stop automatically if they have no work to do,for example,the performance logs and alerts service.
Thanks
HV

Hello,
I am also have the same issue with my install. The EPM Architect Process Manager errors out with the following message:
Service cannot be started. System.InvalidOperationException: Cannot start service HyS9BPMA_JobManager on computer 'BIGDADDY'. ---> System.ComponentModel.Win32Exception: The service did not respond to the start or control request in a timely fashion
--- End of inner exception stack trace ---
at System.ServiceProcess.ServiceController.Start(String[] args)
at Hyperion.DimensionServer.ProcessManager.ProcessManager.StartJobManager()
at Hyperion.DimensionServer.ProcessManager.ProcessManager.Initialize()
at Hyperion.DimensionServer.ProcessManager.Service.OnStart(String[] args)
at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
For more information, see Help and Support Center at
Any Ideas as to how to fix this? I've tried increasing the timeout variable, but the process errors out in less than 10 seconds so i don't think that is an issue. Any additional help would be greatly appreciated. Thank you.
Corey

OPMN Process Manager failed to start - libmodapi.so libclntsh.so not found

Hi all,
I am completely new to Oracle in its entirety. I am trying to install Oracle Enterprise Manager Grid Console 10.2.0.1.0 on Oracle Enterprise Linux 5.1 through the OUI using the new database install. When I get to setting up the Oracle Application Server, it tells me the OPMN Process Manager failed to start, tells me to check the logs in /oms10g/opmn/logs, and to start OPMN manually before hitting retry.
The log files in that directory do not seem to contain any errors.
When I run ./opmnctl stopall, ./opmnctl startall, ./opmnctl status, I get no obvious errors, and then the following:
DSA ~ DSA ~ Down
HTTP_Server ~ HTTPServer ~ Alive
LogLoader ~ logloaderd ~ Down
dcm-daemon ~ dcm-daemon ~ Down
OC4J ~ home ~ Alive
WebCache ~ WebCache ~ Alive
WebCache ~ WebCacheAdmin ~ Alive
When I do ./opmn start I get the following:
./opmn: error while loading shared libraries: libmodapi.so: cannot open shared object file: No such file or directory
When I do a ldd ./opmn I get the following errors:
libmodapi.so => not found
libclntsh.so.10.1 => not found
I am assuming my problem is that these two libraries are not linked in. I have looked through the forums, and found closely related threads, but none that seemed to help, most notably changing my PATH. If anyone has any suggestions, I would welcome them. Thanks for your help.
Sincerely,
Don

Hi All,
We all agree that best practice involves a test installation. My original post was about a problem I was having with the creation of my test bed. I did create my own manual, which I am sure is not the best manual ever created, but does work to get the software installed. If it is proven out, I will post it to try and return something to the community.
In order to do this, I needed to read thousands of pages of documentation so far, which does not even scratch the surface of the total amount on OTN. I am still revising my instructions as I find that the documentation commonly assumes the reader has been installing Oracle for some time and is fully aware of all the appropriate acronyms and the entire logical and physical structure of the database. In order to just read many of the documents, I had to draw out a map of Oracle on a whiteboard as I went. As a systems administrator, should I have to search through all those papers, manuals, the web, etc. and try to gain an advanced DBA understanding to get a working default installation? Perhaps it seems like I am just a new user who is whining, but how many programs can you think of where this type of effort is required?
In looking at the relationship between the DBA and the Systems Administrator, where should we draw a line between their tasks?
Should the DBA have to learn how to assess appropriate server hardware, and then install and administrate every flavor of Windows, UNIX, Linux, etc. in any given environment? Should a DBA be required to build a Linux kernel, configure Active Directory, or install Solaris before installing Oracle?
Should the Systems Administrator have to learn the nuances of installing and optimizing Oracle databases in order to just put the base software on the system and configure the kernel so it is ready for a DBA?
More interesting, as stated above, I could hand you the Gentoo Handbook, and without knowing a single thing about Gentoo Linux, you would have a default installation of the Gentoo OS. You could also grab step-by-step instructions for a default installation of MySQL on Gentoo, or a myriad of other programs, for that matter. This would hardly replace the Gentoo systems administrator or MySQL DBA, but it does serve a very valid purpose of enabling the systems administrator and DBA. Shouldn’t Oracle have something similar?
I would think the Systems Administrator knowledgeable in the OS and Kernel should be able to perform the first half of the installation task where they are more likely to be an expert, and then allow the DBA to create and optimize the databases they install, which they in turn can spend years learning how to do. Time that the DBA spends learning the OS or time the Systems Administrator spends learning Oracle is valuable in the long run, but it is also extra time to get the initial database up and running. One of the largest reasons IT personnel exist at all is to keep users from having to spend too much time learning about their computers to get their work done. Shouldn’t this also translate between IT groups?
Databases are one of the few software installations that systems administrators commonly don't have to maintain on corporate servers. The best comparison I know of is web services. In this manner web servers are very similar, and are commonly installed by a team as well. I am perfectly capable of creating a default install of Apache, Tomcat, or IIS from step-by-step instructions provided by Apache or Microsoft without much more tailored information than the IP address and system name we are going to use to fill in the blanks during the installation.
While I have performed the role of sole IT staff at a small software engineering company, and have therefore been the SysNetWebSecDB admin hydra in the past, in larger companies there seems to be no problem with having the system administrator create a default installation of Apache or IIS, having the network team configure the switches and DMZ, and having the web team customize the server and design the site without each of them having to know everything.
So the above is a good idea and I would encourage
them to do it because after that, it makes them
stonger than when they use an already completed one
to install.Sometimes there is time to sit down and read all the instructions and become a more robust IT professional. Sometimes there is only time to read the Getting Started section and you have to read the full instructions and optimize later if there is time. Sometimes you have outside influences that mean it has to get done in less time than it should, whether or not the justification for rushing is reasonable.
Should I plan to read every knowledge base article ever published by Microsoft in order to create a test bed installation of Windows 2008? Honestly, I’d still be reading the NT4 docs.
Not only does not every business have a DBA, or the money to hire one, sometimes the business does not want to do so, or sometimes the security is such that the DBA is not part of the unit allowed to utilize administrative access on the servers. That doesn’t mean they don’t need a database tomorrow.
As an IT professional, I will never be able to come close to encompassing the amount of knowledge I actually could use to do my job. I try to specialize in a few areas so that I have the ability to keep up with the exponential rate of IT expansion, but I basically consider a vast part of my job being constantly thrown into the deep end, and, fair or not, getting things done anyway. Hopefully that makes me good at my job. The question is how much time and effort I should need to apply before I can get to a reasonable starting point where everyone else can do their work too.
There
is normally no single document to achieve or complete
and installation unless the bespoke type. Apart from
the Install Guide, there could be Readme, Release
notes, Adendum etc. While I noted in a previous post that I shouldn't be too hard on Oracle in trying to document such a massive effort, that doesn’t mean that their documentation doesn’t need work. Why is the documentation for a single product spread out over tens of thousands of pages? It should be obvious that this has resulted in redundant and often conflicting documents, including the dozen readme documents in the installation files, the readme documents in the installed files, the install guide, the readme and addendum for each of those, the release notes for each of those, and a new set for each patch.
Obviously, for any installation, I need to complete a document for my own environment that contains the proper network configuration for our own LAN, or the proper partitioning. I do this for any program. Oracle needs me to change the name of the OS install to get their installer not to error out on their own OS. If OFA is so desirable, why not make the default install explain and follow OFA? Basic issues like this are highly avoidable, and shouldn’t be seen by the end user, even if in this case the end user is a highly technical audience capable of adjusting.
It will hard to get a single document because they
will be platform dependent and what someone did in
their install, may not always work everywhere.Again, please note that Oracle has "released" an OS that they intend for people to use on their Oracle validated hardware as a premier platform for their Oracle database. It isn't a stretch to feel that Oracle should then be able to provide valid, step-by-step instructions for a default installation of their own software, on validated hardware, on their own OS. I’m not expecting an optimized and populated database, but if the hardware, OS, and software are all under Oracle’s control, there aren’t really any variables other than machine name and IP address for a default install.
Hopefully my current knowledge will work for the time being, and I will be able to optimize appropriately in the future as I can.

Performance meter on Solaris queries

Is there a command line way to run the perfmeter if we donot have Exceed installed?
I have XMing running and want to spawn just he perfmeter
Also performance meter monitors all the processes on solaris, like windows perfmon, is there a way to use it to monitor only a single process?
Is there any documentation which will help me understand the counters monitored by performance meterr on solaris?

Solaris 8 uses an older thread model by default. There user threads did not necessarily map to system threads (LWPs). You needed to be more explicit with your parallelism requests. I think you can request a low 'concurrency' to reduce the number of LWPs.
In addition, a new thread model was introduced that reduced certain types of overhead by moving to a 1:1 thread/LWP mapping. This model is the only one on later versions of solaris, and is available on Solaris 8 as the "alternate" thread library.
http://developers.sun.com/solaris/articles/alt_thread_lib.html
You might want to try your program again, but run as:
LD_LIBRARY_PATH=/usr/lib/lwp <yourprogram>
Any changes?
Darren

How to use an external XSLT engine for Oracle BPEL Process Manager

Hi,
is there a way to use an external XSLT engine instead of the build in provided in Oracle BPEL Process Manager?
The reason is to perform some XSL Transformations that use an OWL Query language.
Thanks!

Yes. you can write your own xpath function which can connect to external xslt engine and pass-in your document:
<copy>
<from expression="my:myxslt-processor(bpws:getVariableData('var1','part'))"/>
<to variable="v2" part="payload/>
</copy>
The following Thread discusses about how to create an extension xpath function:
http://forums.oracle.com/forums/thread.jspa?forumID=212&threadID=305548

IDeliveryService.request(..) throws error in BPEL Process Manager 10.1.3.1

Hi all,
I try to start a bpel process from a stand alone java client, it works when I tried it with BPEL Process Manager 10.1.2 but it didn't work for 10.1.3.1.
Here is my code :
NormalizedMessage message = new NormalizedMessage();
// message prepared here ...........
IDeliveryService service = (IDeliveryService) locator.lookupService(IDeliveryService.SERVICE_NAME);                    NormalizedMessage result = service.request(processName, "process", message);
What should I do to make it work?
Thanks in advance,
santoso
Below is the exception:
WARNING: Exception returned by remote server: {0}
oracle.classloader.util.AnnotatedLinkageError: duplicate class definition: com/oracle/bpel/client/ejb/interfaces/ITaskManagerBeanHome
     Invalid class: com.oracle.bpel.client.ejb.interfaces.ITaskManagerBeanHome
     Loader: orabpel.root:0.0.0
     Code-Source: /D:/product/10.1.3/orabpel/bpel/system/appserver/oc4j/j2ee/home/applications/orabpel_ear/ejb_ob_engine.jar
     Configuration: <ejb> in D:\product\10.1.3\orabpel\bpel\system\appserver\oc4j\j2ee\home\applications\orabpel_ear
     Dependent class: oracle.oc4j.rmi.ServerRmiMethodCache
     Loader: oc4j:10.1.3
     Code-Source: /D:/product/10.1.3/orabpel/bpel/system/appserver/oc4j/j2ee/home/lib/oc4j-internal.jar
     Configuration: <code-source> in META-INF/boot.xml in D:\product\10.1.3\orabpel\bpel\system\appserver\oc4j\j2ee\home\oc4j.jar
     at oracle.classloader.PolicyClassLoader.findLocalClass (PolicyClassLoader.java:1462) [D:/product/10.1.3/orabpel/bpel/system/appserver/oc4j/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@9627532]
     at oracle.classloader.SearchPolicy$FindLocal.getClass (SearchPolicy.java:167) [D:/product/10.1.3/orabpel/bpel/system/appserver/oc4j/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@9627532]

Hi Frisco,
I still can't find any solution for it.I switched to axis2 to invoke the bpel process.
santoso

BPEL Process Manager Oracle BPEL Domain Initialization Failed

I was able to login into BPEL Process Manager without any error. Then I changed one entry in the oc4j-ra.xml file and restarted the BPEL server and started getting the error message.
Oracle BPEL Domain Initialization Failed
The Oracle BPEL Domain default did not initialize successfully. The following error was detected during startup. Please contact the Oracle Support
Team if you are not able to resolve this problem.
Reported Error:
Cannot lookup jdbc datasource.
The process domain was unable to lookup the TX datasource "eis/DB/DBConnection1".
Please check that the machine hosting the datasource is physically connected to the network. Additionally check that the
connection pool properties as defined in the application server startup
properties are valid.
I put back the original oc4j-ra.xml back in appropriate dir , restarted the BPEL server and database server still getting the same errro message listed above, It's urgent can anybody post the possible solution/suggestion experience.
Thanks

I opened the file under
./application-deployments/default/DbAdapter/oc4j-ra.xml and it has the following entry
<connector-factory location="eis/DB/DBConnection1" connector-name="Database Adapter">
<config-property name="xADataSourceName" value="jdbc/DBConnection1DataSource"/>
<config-property name="dataSourceName" value="loc/DBConnection1DataSource"/>
<config-property name="platformClassName" value="oracle.toplink.platform.database.Oracle9Platform"/>
<config-property name="usesNativeSequencing" value="true"/>
<config-property name="sequencePreallocationSize" value="50"/>
<config-property name="defaultNChar" value="false"/>
<config-property name="usesBatchWriting" value="true"/>
<connection-pooling use="none">
</connection-pooling>
<security-config use="none">
</security-config>
</connector-factory>
I opened that file (
./connectors/DbAdapter/DbAdapter/META-INF/oc4j-ra.xml) and it has no entry for
<connector-factory location="eis/DB/DBConnection1" connector-name="Database Adapter">
<config-property name="xADataSourceName" value="jdbc/DBConnection1DataSource"/>
<config-property name="dataSourceName" value="loc/DBConnection1DataSource"/>
<config-property name="platformClassName" value="oracle.toplink.platform.database.Oracle9Platform"/>
<config-property name="usesNativeSequencing" value="true"/>
<config-property name="sequencePreallocationSize" value="50"/>
<config-property name="defaultNChar" value="false"/>
<config-property name="usesBatchWriting" value="true"/>
<connection-pooling use="none">
</connection-pooling>
<security-config use="none">
</security-config>
</connector-factory>
So I entered this and restarted the BPEL PM but still no luck,
Is anything else I will be looking in that file let me know

Process Manager Vrs Performance Meter

Similar Messages

Maybe you are looking for