Process Map in Workspace

Hi all,
We are using a clustered environment in QA.
When we click on a Work Item and then on Work Item Details inside the BPM Workspace and then click on the Process Map on the right hand corner of the Work Item Details , we DO NOT see the Process Map and the server fails.
What could be the possible reason for this?
Any idea?

I don't think its possible to hide any activities from the process map. Within studio, you can only hide them from your view but even that functionality is buggy....

Similar Messages

How do we add a link to process map on the desk manual web page?

Hi: The Tutor demo I used shows a hyperliink to process flows and one can drill down to see the connections between the processes at a high level so the auditor to navigate the different processes and sub-processes. Is there somewhere in the documentation that can show me how to include this? I created a process map document, using the steps in the documentation, saved it with the prefix RE and published it, created a new index, but sadly I can't seem to get a link to this on the main web page. Also when I click the hyperlinks on the Process flow doc, I get a web page error although I used a valid PR doc name. Any help would be greatly appreciated. Is there any additional documentation on publishing the maps and displaying them on the web pages? Thanks so much, Heather

Hi Emily: I'm finding it difficult to understand how the SR suggestions answer my inquiry. Is there any way you can take a look at SR 3-7354806811? , Heather

Fpga compilation xilinx error 'Process "Map" failed' - 'unroutable situation'

When I try to compile a Labview fpga project on our new system, it fails with the following error summary (the full Xilinx log is attached):
LabVIEW FPGA: The compilation failed due to a xilinx error.
Details:
ERROR:LIT:536 - IBUF symbol "aUserGpio<1>_IBUF" (output
signal=aUserGpio<1>_IBUF) has the attribute IOBDELAY set to value NONE and it
is driving an IODELAY. If the IOBDELAY attribute is on the driving PAD, it
has precedence over the IBUF one. Either the constraint or the design need
modification to prevent an unroutable situation.
Errors found during logical drc.
Design Summary
Number of errors : 1
Number of warnings : 349
Process "Map" failed
Start Time: 10:31:49 AM
End Time: 10:55:32 AM
Total Time: 00:23:43
Hardware:
NI PXIe-1071 Chassis
NI PXIe-8108 Embedded controller
NI PXIe-7965R FPGA FlexRIO FPGA module
NI 5761 250 MS/s 14 bit Analog input digitizer
Installed software:
Labview 2011 version 11.0
Labview FPGA module 11.0.0
FPGA compilation tools (Xilinx12_4)
NI FlexRIO Adapter Module Support 2.2.0
NI-RIO 4.0 (FlexRIO 2.1.0)
Xilinx DRAM compilation bug fix patch from NI article id 5E4FNCDP
Xilinx clock bug fix patch from NI article id 5GFAB7DP
replaces c:\NIFPGA\programs\Xilinx11_5\ISE\xilinx\lib\nt\libPlXil_Clocks.dll; The installed version is c:\NIFPGA\programs\Xilinx12_4-> Manually copied the dll to the installed version
The Project uses the 5761 low speed clip and a DRAM FIFO.
I tried to compile it before installing any patch, after installing the DRAM patch, and after installing both patches and always got a Xilinx error after ~10 minutes compile time. The error summary shown above and the attached Xilinx log are from compiling with both patches installed.
It compiled correctly on our older system:
Hardware:
NI PXIe-1082 Chassis
NI PXIe-8133 Embedded controller
NI PXIe-7965R FPGA FlexRIO FPGA module
NI 5761 250 MS/s 14 bit Analog input digitizer
Installed software:
Labview2011version10.0.0
LabviewFPGAmodule10.0.0
FPGAcompilationtools (Xilinx11_5)
NIFlexRIOAdapterModuleSupport2.1.0
NI-RIO3.5.1 (FlexRIO1.5.0)
XilinxDRAMcompilationbugfixpatchfromNIarticleid5E4FNCDP
Any help / suggestions greatly appreciated,
Fabrizio
Attachments:
XilinxLog.txt ‏1482 KB

Hi Torpedotown,
Can you tell me what version of FlexRIO Adapter Module Support you are using?
The 5761 Low Speed CLIP has a constraint that doesn't work properly with some versions of the compilation tools. In order to solve this you should be able to upgrade to our latest version of FAM support, or go change the constraint manually.
For the latest version of FAM support, go to http://ni.com/info and enter code "famsoftware"
If you've modified constraint files before and feel comfortable doing it yourself, let me know and I can provide you with the details on how to do that.
Thanks!
National Instruments
FlexRIO & R-Series Product Support Engineer

Question about documenting process maps and form object properties

Does the new version of Workbench have a tool that allows us to print a report showing the properties of the object used in a form template or process map? For example... showing all of the properties like fonts, size, patterns, defaults, whether or not a field is required, etc...? I am also checking to see if this capability has been added to Workbench for Process Maps?

No it does not but there is a blog entry by John Briinkman that will analyze your form template and give you some of that information. Here is a link to the blog entry:
http://blogs.adobe.com/formfeed/2011/05/updated-form-report-tool.html
Paul

SAP Best Practice: Can't open process maps

Hi Community,
when I try to open a process map within the SAP best practice package I receive this error message (tried various browser, low security settings):
Any ideas how to avoid this error message?
Thanks in advance,
Frank

Hey Frank,
is my assumption correct, that you use either Firefox or Chrome? Please try with IE.
In case this does not work, please go to:
https://websmp108.sap-ag.de/~form/handler?_APP=00200682500000002672&_EVENT=DISPLAY&_SCENARIO=&_HIER_KEY=501100035870000006532&_HIER_KEY=601100035870000146943&
Select the country you are interested in and download.
Best,
xiaoma

Best Practices for ASAP Inputs - As-Is Business Process Mapping

I am new to the SAP world and my company is in the early phases of implementation. I am trying to prepare the "as-is" business process maps for the Project Preparation and Business Blueprint phases and I am looking for some best practices. I've been told that we don't want them to go too deep but are there best practices and/or examples that give more information on what we should be capturing and the format.
I have searched the forums, WIKI, ASAP documentation, and other areas but have not found much at this level of detail. I have reviewed the [SAP BPM Methodology|http://wiki.sdn.sap.com/wiki/display/SAPBPX/BPM+Methodology] but again I am looking for more detail if anyone can direct me to that.
Thank you in advance for any assistance.
Kevin

Hello Kevin,
You can try to prepare a word document for each of your As-Is processes first before going to As-Is Process Design in a flowchart.
The word document can have 7 sections -
The first section can include Name of the Process Owner, Designation, Process Responsibility, User Department(s) involved, Module Name and a Document number for reference.
The second section can include Process Definition details - Name of the major process, Name of the minor process, Name of the sub process and a Process ID for future reference.
The third section can be titled as Inputs - this contains details of - Input, Vendor for the input, Type of Input (Data / Activity / Process), Category of Input (Vital / Essential / Desirable) and Mode of Information (Hard / Soft Copy).
The fourth section can be Process Details. Here you can write the process in detail.
The fifth section to contain outputs of the process, customer to whom these outputs are sent, type of output (report / approval / plan / request / email / fax), Category of Output (Vital / Essential / Desirable) and Mode of Information (Hard / Soft Copy).
The sixth section can be Issues / Pain Areas in this process - Issue Description, Remarks, Expectations, Priority (High / Medium / Low)
The seventh section can be expected reports in future out of this process for internal and external reporting.
Hope this helps your question.

SAP business process maps for mySAP ECC6.0?

Any idea how we can get the SAP business process maps for mySAP ECC6.0? Is this imbedded in Solution Manager?
Thanks,
Phani

Hello Phani,
I suppose you are looking for the solution maps for mySAP ERP (which contains SAP ECC as a component). These maps are not contained in the SAP Solution Manager, but they are delivered with the SAP Solution Composer, an offline PC tool which allows you to browse and pre-scope your own solution (evaluating your solution). The tool itself including the latest solution map content is always available for download at the SAP Service Marketplace:
<a href="http://service.sap.com/s-composer">http://service.sap.com/s-composer</a>
You can also view the mySAP ERP - as part of the cross-industry maps - right here:
<a href="http://service.sap.com/form/sapnet?_SHORTKEY=01100035870000338980&">http://service.sap.com/form/sapnet?_SHORTKEY=01100035870000338980&</a>
The SAP Solution Manager would then come into play for configuring the respective processes (implementing you solution).
Best regards,
Doreen Baseler

Process Administrator and Workspace admin url for 10gR3

I am running 10gR3 bpm locally.
Url to access my local workspace is http://localhost:8585/workspace/faces/jsf/workspace/workspace.xhtml
Could you let me know the URL for accessing the process administrator and workspace admin.
Thanks in advance.

Looking at your port 8585 it is the default port for Studio, in Studio there is no webconsole or workspace administrator, those applications only are available in enterprise.
If your case is enterprise then the url is /webconsole and /portaladmin
HTH

SAP defined process maps on SCM

I need SAP business and process maps on following areas for discrete and process industry.
1. Order Management process ( Procurement)
2. Warehouse management
3. Transportaion management
4. Demand planning
5. Inventory planning.
Please inform me the location ( website , sap address etc. ).
Thnaks.
Sumit

Sumit
Typically there is no single process flow defined for any given business scenario within SAP, normally there are a number of alternatives based on industry best practice.
When you have carried out the business blueprint phase and captured these requirements within Sap solution manager you are then able to generate process flows that describe the business scenario.
These are not currently able to generate BPEL or UML models, to do this you would need to use something like ARIS for SAP Netweaver.
Unless the context of the business requirements are understood and without access to SAP Solution manager you might be limited as to the "process flow" view you seem to be after.
Therefore please have a look at the business scenario maps, I would also recommend downloading the solution composer, this should be capable of generating the business scenarios for you.
http://www50.sap.com/businessmaps/91039F49E53F11D3874B0000E820132C.htm
While this may not be exactly what you are after, you could also search the best practice packages components on http://help.sap.com

How is u201CCheques in Transitu201D process mapped IN sap B1

Hi,
How is u201CCheques in Transitu201D process mapped in SAP Business One > Banking Transaction.
Regards
shashi

I am afraid there is no function in current B1 to map u201CCheques in Transitu201D process.
Thanks,
Gordon

Business Process Maps/ Process Flows for Retail Operations

Dear All,
I am looking for Business Process Maps/ Process Flows for Retail Operations like forecasting, inter store transfers, ASN, Procurement, Allocation etc.
Kindly provide me with a link, docs, PPts etc.
Appreciation would be in the form of points.
Regards,
Jack Silverz

Hi Jack
Seeing as you only got one reply - I'm jumping in with my 2-peneth.
Seldom have I found process content which sufficiently explains both manual and automated processes in a format which is sufficiently simple to engage discussion (between project teams and business representatives). Is there a way to strike the required balance - simplicity for the sake of engagement; yet rich enough to record SAP dependencies, system requirements and so forth.
An answer in my opinion is [here|https://ecohub.sdn.sap.com/irj/ecohub/solutions/control2007]. (Honest account - I work for Nimbus. But you don't have to take my word for it. Check out our case studies if you like. This approach is being adopted by several strategic SAP accounts several of which are listed [here|https://ecohub.sdn.sap.com/irj/ecohub/solutions/control2007]).
What might partly address your requirement is the [APQC Process Classification Framework|http://www.apqc.org/portal/apqc/site/?path=/research/pcf/index.html] . We took this framework as a starting point for building a model company process map. I cannot claim that it is Retail specific, but we have quite a few retail customers who have adopted Control 2007 and also several supply chain optimization projects which we have delivered.
If this is of interest - we provide a web hosted demonstration environment where you can explore the APQC process content I mentioned above. You can contact me through [SAP EcoHub|https://ecohub.sdn.sap.com/irj/ecohub/solutions/control2007] for more details
Kind regards, Nigel

SAP standard business process mapping

Hi All,
Can you provide any link or document where I can find standard business process mapping with various SAP modules for Hi-tech manufacturing industry.

Cool,
The below link should help you.
http://help.sap.com/bp_hightechv1600/HighTech_DE/html/index.htm
In the area Industry-specific information you will find general industry information and general information on SAP Best Practices for High Tech.
The section Business Blueprint provides a SAP Best Practices Solution Scope document which outlines the processes and functions covered by the SAP Best Practices for High Tech. It describes the various functions and explains their business purposes.
The SAP Best Practices Solution Map shows how various processes are covered by SAP Best Practices and illustrates the preconfigured processes in a consistent, multi-level way, in order to demonstrate the value SAP Best Practices can add to a company.
Under Preconfigured Scenarios, you will find all the scenarios in the scope of SAP Best Practices for High Tech, grouped accoring to the different SAP solutions.
Hope this information helps too.
Thanks,
Ram

JavaScript error when opening BPEL process map

This just recently started happening when I try to open a BPEL process map in Process Designer.
I get a JavaScript error. It's a Internet Explorer Script Error window that pops up sayingL
Line 467
Char 5
Error: Access id denied
Code 0
URL: file://C:\Eclipse\plugins\bpelz_0.9.10\html\bpel.html
Do you want to continue running scripts on this page?
No matter what I click is just get a Eclipse pane saying Access is denied.
I am hoping my process maps are not corrupt now.

See if this helps:
Troubleshooting JavaScript errors in Dreamweaver
http://www.adobe.com/go/19105
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au
~ Forum Posting Guidelines ~
http://www.adobe.com/support/forums/guidelines.html
CSS Tutorials for Dreamweaver:
http://www.adobe.com/devnet/dreamweaver/css.html
"tkatcher" <[email protected]> wrote in
message
news:etce5v$2nh$[email protected]..
> Error when dreamweaver is opening:
> The following Javascript error occured:
> At line 3556 of file "c:\program
files\macromedia\dreamweaver
>
8\configuration\shared\common\scripts\dwscriptsserver.js": if
(nodelist
> SyntaxError: illegal character
>
> When the program opens, I cannot copy, cut, or paste
without an error
> message.
> When I try to upload, the upload does not complete
saying it cannot find
> the
> server.
>
> This just happened after I installed a new PNY Video
Card and the driver.
> I
> did not load any software other then the driver.
>
> Please advise.
>

Linking different processes under same workspace

Hi..
I have few processes under my workspace which i need to link. Like calling a process from another process ?
Is there any way to link these process so that the flow can be continuous ???

I am not really sure of what you are trying to do, but 1 of the options can be to send a Notification from 1 process to the other process, and have a Notification Wait activity in the called process receive it.
HTH
Rajat

Process map does not show role label.

In BPM standalone 10.3.1 (with patch), I create some roles. Role lables are different from role id.
For example, role id: r001, role label: manager
In studio 10.3.0, all roles have labels. The role ID and role labels at studio are the same as role ID and labels of BPM standalone 10.3.1
However, in the workspace and image API, the process image only shows role ID.
Sometimes, the image shows activity ID (such as I001). Sometimes it shows activity Names (such as: Application).
In the machine which the BPM standalone is installed, the process image in the workspace only shows activity ID and role ID.
In another machine, the process image in the workspace can show activity Names but only shows the role ID.
I try this in my PC. This time, the image can show role id correctly but cannot show activity name (it shows activity id).
In this case, one BPM project has more than one processes. Each process has different ID. Interactive activities have same id but different labels. For example, process A has activity: I001, I002 and names are staff, manager.
process B has interactive activities: I001, I002, I003 and named as staff, manager, and vp.
Process A and B belong to one BPM project.
Another BPM project has 3 processes named Process C, Process D, Process E.
Every process (C, D, E) has activity I001, I002 and etc but with different labels.
How to let the image show correct role labels and activity name?

Do you have Lightroom installed on a case-senstive partition? See here for more details and troubleshooting:
Map module is white | Mac OS

Process Map in Workspace

Similar Messages

Maybe you are looking for