Process message & Process Instruction Category for PI sheet

Hi All,
where we can assign Process message & Process Instruction Category for PI sheet ?if possible please explain it sequence or steps?

Hi,
Process instruction categories can be assigned in master recipe or in Control Recipe Destination in configuration....
In master recipe (C201/C202) :
In Configuration : O10C
Process messages are assigned in Process instructions as shown below...
Thanks
Kumar

Similar Messages

  • Process Instruction Category for the online inspection in process industry

    Dear Gurus ,
    I will have to add online quality inspection in the PI SHEET so please suggest me the process instruction category for the same .
    Abhi

    Hi,
    PPPI_INSPECTION_LOT Inspection lot
    PPPI_INSPECTION_RESULT Inspection result
    Please refer the details,
    [Process Instruction Category|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4b82b590-0201-0010-a39b-89349ba1972b]
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/277bb590-0201-0010-a992-f785fb7aa787
    Regards,
    R.Brahmankar

  • Error Message - Invalid Parent Category for product

    Hi Campaign Experts,
    I am getting error message "Invalid Parent Category for product" in campaign when I am trying to assign a service product to campaign. Even I tried assigning sales product and also assigning at campaign element level, but the error always appears.
    On the campaign screen in CRM 7.0 webUI, it allows me to search product and displays the product during search but raise error when I select the product.
    Any suggestions?
    Thanks
    Umesh

    Hi Umesh,
    Just maintain Product hierarchy in :
    SPRO->Customer Relationship Management->Account Planning->Product Assignments->Assign Product Hierarchies
    Here you maintain Product hierarchy which has been used in your Product which you are trying to enter in Campaign.
    Regards,
    Dipesh.

  • Processing message characterastics not displayed in pi sheet

    Hi Experts
    I am working with a process Industry and need to maintain PI sheet which should contain dynamic function call for conformation,
    processing data request and processing note and instructions for a single phase.For this I have maintained PI catagory type 1 , PI catagory type 2(prod_1),  and PI catagory type 6 (dynamic function call for conformation) for the destination 1 and assigned to a single phase.When I check in recipe
    Simulation I am getting all pi notes , processing data request and dynamic function call in the PI Layout and do not find any errors.
    But after I send the recipe using co53 and trying to maintain in co58, I am getting only dynamic function call conformation which I assigned
    to the phase as a first PI Catagory but other processing  messgae request and Pi note  not displayed in PI Layout.
       Shall anybody explain the reason and solution for this which would be highly appreciated .
      Regards
      Srinivas

    Hello,
    Solution found :
    You have to close/re-open the screen of solman_workcenter
    Thanks,

  • Process Message Processing delay

    Can anybody explain, why does it take longer time in SAP for a process message to process successfully?
    In CO54 - From the moment it gets created (yello light) to the moment when it is successfully processed (green light). We have an issue in one of the plant where it takes upto 3 to 4 hours to process the message. It is mainly for PI_PROD message category and it happens for only fewl PI_PROD process messages.
    It is only happening for one plant though.

    Ok, I found the solution.
    There is batch job that is scheduled at client level and its priority is "Medium".
    - We changed the priority to "high" (still waiting to see if this helps)
    - If the above solution didn't work then schedule batch job at plant level instead at client level [SAP Recomended] (This should defintely solve the problem)

  • PP-PI - Process message processing and batch management in PI_CONS message

    Hi All,
    Hope you can help me to find the better solution... I will try to explain my scenario
    Scenario: to control the production run PP-PI module is in use. Process order are created in SAP system and then transferred to the process control system where the execution of the process order is controlled On-line. Once per month the confirmations are transferred from this control system to SAP. In the Process control system batch are not managed. For good issue posting standard process message PI_CONS is used.
    Now we have the situation that some raw materials used for process order processing are managed with batch. During the process order creation the batch related with this raw materials can be determined, only during the month when the raw material is entered in the plant is where the batch is determined. At the end of the month the batch of this materials is available in the SAP system (not in the process control system). Due to behavior of PI_CONS regarding batch if this characteristic is not informed in the process message or in the reservation an issue is trigger.My doubts are:
    1.- If I need inform the batch  during this confirmation ,an even split the quantities in the process message according the batch availability, I'm force to use a custom process message or there is other workaround? (remember is not feasible send the batch to the process control system)
    2.- probably i miss something because I'm can't debug the execution of the process message. How can I debug the execution of a manually created process message?
    Sorry for the long explanation I try to explain my scenario as better as possible.
    Thanks in advance for your valuable inputs.

    Thanks for your replay.
    No really I don't like to make  the batch mandatory, during the good issue is not feasible inform the batch due to it is not managed in the Process Control System. Due to the behavior of PI_CONS if for batch managed materials the batch is not informed in the message or in the reservation an error is trigger. In the reservation snot feasible inform the batch because in that moment is unknown.
    My question is if it is feasible some how have like FIFO batch determination when the process message is processed without creating a custom message.
    Thanks in advance

  • Process instruction characteristics and process messages

    Hi,
    Can anyone tell me why process instruction characteristics is required when only process message characteristics are displayed in PI sheets (input or output).
    Regards
    Joe

    Hi,
    Answer is already there in your question.
    and that is
    (input or output)
    Now you creates the one Process Message characteristic let's it is Temperature.But how it's value comes in the PI Sheet (As Ouput or Input manually by user) that is decided by that Process Instruction Characteristic.
    Now when you creates the Process Instruction Category (O12C) except type 0 you have choice of creates it by using help of Process Assistant.This Assistant assigns the Process Instruction Characteristic to the process Massage Characteristic automatically when you select the specific radio button or Activate the check box during that PI category creation.
    For Example when you creates the PI category Type 2 using Assistant.Here after naming first screen comes to you is to define type of Process data Request.Here when you select the radio Button for Simple process data request then indirectly you assign the process Instruction characteristic PPPI_DATA_REQUEST_TYPE and its Value comes as Simple.
    But when you create the PI category type 0 you have to assign this PI Characteristic manually because its Universal Category and there is no assistant which helps you.
    Regards,
    Dhaval

  • Process Message Category

    Dear Experts,
    I need a clarification  How does  Process message  work in PP PI sheet
    See as i  know  control recipe is created  when process order is released
    For setting point of control recipe destination and instruction category is assigned in  Master Recipe. Control recipe destination has thier addresses and porcess instruction to be generated . Characteristic and thier values are assigned in  process instruction category.
    I would like to know that where is process message/ Category in the loop and How does it trigger in PPPI sheet
    Can you explain me to get away from this doubt.
    Regards,
    Edited by: Kumar DS on Jun 10, 2009 8:23 AM

    SAP has some standard Process mesaages.
    Each message has a destnation, which is nothing but a BAPI.
    So when a Process message is created with relevant inputs. the data is sent to the BAPI when it is sent to the destination.which gets executed and achieves the results intended for.
    For example PI_Prod is use for doing a GR (101) for a Process order.
    When we create a Process message with PI_PROD category all the relevant details like Order no, Material , qty, units and Storage location are neeed.then when you send it. The GR is posted.
    .it is used for posting relevant changs from XMII or external systems.
    Edited by: Ratan on Jun 10, 2009 2:40 PM

  • Reg Batch determination using Process messages

    Dear all,
    Please suggest which BAPI to used so that we can carryout batch determination using process messages
    what we need is batch should be picked using FEFO during process message processing
    Thanks in advance
    Regards
    venkat

    Dear,
    In process order you can't find out the date on which batch determination is carried out
    only possible way is activate Order Change management
    So that changes will be recorded, if the batch determination is carried out IN CO02,
    You can see the changes in table PCDHDR, PCDPOS
    or by program RSSCD200,RSSCD150 &RSSCD100
    or through AUT10
    If Batch determination is carried out No change log means, at that time of creation batch is determined

  • No item category for component (BOM)

    Hello friends,
    I've made the below customizing (CR is a customized sales document type)
    CR-LUMF- - -TAP
    CR-LUMF- -TAP-TAN
    CR-NORM- - - TAN
    When I create a sales order I get this message : No item category for component...
    My main item is assigned to LUMF and my components re assigned to NORM...
    What did I miss please ?
    Regards,
    Bahia.

    Can you brief as to in which scenario, you were trying to do this and also the message number which system populates ??
    thanks
    G. Lakshmipathi

  • Process Message and PI sheet

    Dear All,
    I have created one finished product and one raw material. In Master Recipe i created one Phase and assign two instruction category CONS_1 and PROD_1.
    Now i generated PI sheet in COR2 and see CO53 that it is present and now i send it and in CO60 it is there.
    Now when i see and enter quantity in PIsheet and double click on it to see the Process Message
    1) PI_PROD has material number of finished product - It is ok
    2) PI_CONS has also material number of finished product but it should have raw material number.
    So, my issues are
    1) How raw material will be there in PI_CONS Process Message.
    2) Should i create two phase and assign it one by one or what else.
    3) If i have Process Order of 500 quantity and through PI Sheet i do GR of 10 and GI of 10 then for next time how should i do GI and GR again. Should i send PI Sheet again from CO53 to CO60.
    4) Is there only one control Recipe is generated for one process order.

    Hi,
    process instruction CONS_1 will not show raw material number it will show reservation number of the process order...instead of using CONS_1 use CONS_D and use this control recipe destination and make the settings as shown below...
    your final PI sheet output will be like this....
    Hope this helps...
    Thanks
    Kumar

  • How to creat Process messages automatically through PI sheet saved?

    How to creat Process messages automatically through PI sheet to the Process message destinations.

    Hi Jessie,
    When you process instruction category PROD_3 in master recipe, the process message PI_PROD is created.
    After releasing process order, you have to create control recipe. Upon successful creation of control recipe, process instructions will get generated. Check the error log for control recipe creation for error if any. 
    Note that control recipe will be generated only with order status "Released".
    You have to sent this control recipe to process control (CO53).
    Hope it is helpful.
    Regards,
    Sachin

  • Sending Process Message from PI Sheets without "Completing" it

    Hi,
    We have long running process orders in our scenarios (typically lasting 3 days).
    We are planning to use PI sheets to manage our goods issue/receipts/confirmations. During the brief evaluation of characteristics based PI sheets, we found that all the GI/GR process messages are created only when the entire PI sheet is "Completed".
    Since ours is a long running process, we need that the GI/GR entered by the operator is posted immediately in the system (without waiting for PI sheet completion). We can not wait till all the data is entered and the process order is completed three days later.
    How do we handle this problem?
    We thought of using custom function modules. However, that will mean that we will loose the benefits of the standard GUI elements of PI sheets and complications of custom development.
    Any response will be highly appreciated.
    Regards,
    Kundan

    Here is something you can try.
    With the browser based sheets, try putting in a signature PI category (SAP provide "SIGN") which tends to create a message and place it in the message monitor.  By scheduling the message send background job to run periodically you can pick up and send the messages.  You can schedule this job to run after the event "NEW MESSAGE" but beware the system performance - every 5 mins or so tends to be almost as good with less strain on system resources!
    I tend to create a table based PI category to contain each reservation plus room to add actual goods issues/receipts.  Once these are entered, a signature category sends all the messages for the particular phase.  Thus good structure of phases is important.
    For goods receipts, you may need to have a phase for each day against which to post a confirmation and/or goods receipt and this together with signature will send the messages.  Alternately, use a PI Category to call the transaction for performing goods receipt - or a bespoke transaction to "front end" the goods receipt - you can pass parameters when you call transactions so you can could pre-populate some information.
    Final point on signature - you can set a simple signature that just accepts whatever the user enters on the screen - typically their initials.
    Regards
    Laurence

  • Transaction code to find Process message and Process Instruction

    Hi
    I am new to PP module
    Where do i find (In which Transaction) the list of
    a) Process Message Category
    b) Process message
    c) Process Instruction Category
    in SAP ERP system??
    Regards
    Sweety

    Hi
    Thank u all for responding
    Still I was not able to find certain Process Messages like YQ_AIR, YQ_RPM, YQ_TEMP, YQ_CONS, YQ_PHCO, YQ_PHCO2.
    and Process Instructions like
    YQ_AIR, YQ_ENDPI,YQ_HEAD, YQ_INSTR, YQ_LAY, YQ_MATLI, YQ_PROD, YQ_PTEXT,YQ_RPM, YQ_TEMP, YQ_CON1, YQ_CON2..
    do I need to do some (Basis) configuration to get these?? or the above mentioned Process Messages and Process Instructions are not pre defined??
    Regards
    Sweety

  • Process message characteristic with more then ( ) 30 digits in PI-sheet

    Dear all,
    I am looking for a solution to populate a process message characteristic with more then 30 digits in the PI
    sheet and not during control recipe generation.
    I have defined a customer characteristic (with O27C) in the `Additional data for Process Instructions
    and Messages` with a length of 40 Characters. Next to that in my process message i added a function
    to retrieve the material master text (40 digits) and to put it into the customer characteristic as an output.
    However in this set-up I get an sytax error that blocks the generation of the control recipe. The syntax
    erro is due to the fact that the long text characteristic should have a value. Obviously it does not,
    because I want to retrieve it from the material description. Note that the material number I use to retrieve
    the text, is selected in the PI sheet itself an is unknown (unplanned Issue) at generation.
    Please advise.
    Cheers, Leo
    Edited by: L. de Pee on Oct 6, 2009 3:08 PM

    Hi.
    Its BPM Standard cubeCube , 0BPM_C01 and we are populating 0fiscyear based on Instance-Id.
    I have reloaded the cube and maintained Index, checked DB Stat, Roll up , compression all are done, but still facing the same issues.
    Please provide me your inputs if you faced the similar issue.
    Thanks in Advance.
    Br
    Alok

Maybe you are looking for