Process Multiple Images gives Error.

When trying to process multiple pictures in the editor (saving them to a new folder for including them in my blog) it processes one picture and then gives me an error message box with “Could not complete your request because of a program error”. I then click on OK in the error box and try it again, same message after processing one more picture. This continues until the last picture is processed. This is not the way it is sappose to work.
I also get this message when trying to process multiple pictures in the raw editor when I go to open them by clicking on Select All and then clicking on OPEN IMAGES. After clicking on OK in the error message box the editor opens but none of the pictures I want to edit are loaded. Yet if I go back to Organizer the pictures I selected for edit are marked as locked edit in progress. I have to end the editor to unlock the pictures.
oh and my version of PSE12 is:
Version 12.0 (20130903.r.43239)
Running on HP Pavilion g7 with Windows 7 SP1 Home Premium with all current updates applied.
I have also turned off all Media Analysis.

Frank,
If you are trying to change the aspect ratio to the desired output format,
you still have to discard some portion(s) of your image. Many digital
cameras shoot in a 4:3 aspect ratio. If you want 6 x 4 prints, you will
have to crop to that ratio. In a simple case, the entire width can be used,
but the height will be excessive by about 11%. Now, the entire 11% can be
cropped out of the top or the bottom. Or it can be taken from both top and
bottom in any kind of proportion. Again, each image should be individually
evaluated and the crop area should be manually defined, based on the content
of the photo.
Juergen

Similar Messages

Image Quality Processing Multiple Images

When I first installed PSE, I could process multiple images and have the new image auto saved
at the same image quality of the original. Now it changes to a value of
"3" ...and I can't figure out how to predefine it to a higher quality

I get in "Full" edit mode, then click File / Process Multple FIles.
Then I select my source folder and my destination folder ...next I select one or several of the "Quick Fix" options ...usually just Auto Contrast.
Finally I click "OK"
The last few times, the new "processed" file is saved at ~400-500 KB ...instead of the original 3-4 MB.
Any help would be appreciated.

ADDT multiple image upload: "error 500"

Right now, I have managed to get the update record form wizard working, the right input ends up in the correct fields in the database.
So I'm left fighting with the "multiple image upload", which gives me an "error 500" message (error connecting to server)
The window does show me the correct files in the correct folder, but when I try and upload an image I always get the error 500 message.
I have read that the "multiple file upload" uses a temporary folder, and Im assuming that the "multiple image upload" does the same, and I suppose that I should CHMOD that folder to 777.
Do you know where I can find that folder?
Can anyone help me with that error?
Please?
Sorry about my name, I tried a lot of other names, and all were taken, but this random name went just fine

I thought it did - When I used the upload and save to database it saved the original images in a folder and created a sub folder called "thumbnails" and saved the thumbnails - origianl filesname just with width and height appended at the end.
I checked my server files and their definately created.
I browsed the java script and the help files which mentions it does this but I would like to be able to change the naming format of the thumbanils if possible

ACR & IPHOTO--processing multiple images

I am wondering how I can open multiple pictures in ACR from IPHOTO to process?
Thanks a bunch..I have been trying to figure this out forever!!
Jenny

I'm not sure it's possible to do it directly from iPhoto. It's frustrating me as well!
In the Finder, if you have multiple raw images selected and right-click and select Open With Adobe Photoshop Elements, it will open in ACR with all the image preview to the left. You can then select one, some, or all of them and apply the same settings.
In iPhoto though if you select multiple raw images and right-click and select Edit in external editor, the images will open one at a time.
ACR does let you change how it processes each new file. If you select Previous Conversion, once you process the first one, you can use the same processing on the next images.
Another way around this is in iPhoto, right-click and select Show File. This will open the Finder and you can then select multiple images and precess them all at once. This really isn't a very good solution though because it adds another step and you have to find the images agan.
Hope this helps and if anybody else knows how to do it from iPhoto, that would be wonderful!

Why do file sizes change when I use "Process Multiple Images" to add watermarks?

Hi,
I'm using Elements 11. In order to add watermarks to many JPG pics at once, I use the function "Process Multiple Files".
I select a source folder and a destination folder, and adds a three digit serial number to each file. I do NOT tick the checkbox marked "Change picture size". After that I define the watermark I want printed on my pics and hits OK. All the files in the source folder are processed and saved, with a new name in the destination folder. Fair and square.
But. The file size of the new file is heavily reduced, compared to the original. It goes from 10 MB down to 500 KB (in general). Why is that? Is there any way I can prevent it?
Regards,
/Mikael Lindgren

Or you can uncheck the convert files box to save them in their original format, or select one of the lossless formats PSD, BMP, TIF. What is most appropriate depends on what you intend to do with the watermarked versions.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Process multiple images... How do you CROP them?

I'm trying to process a bunch of photos. The first thing I need to do is crop them to a certain size. But in the Process Mulitiple Files dialog box, the only option I see is to resize - not crop - them. So I'm ending up with squished photos instead of cropped ones.
Does anyone know how to crop them using the multiple process?
Thanks.

Frank,
If you are trying to change the aspect ratio to the desired output format,
you still have to discard some portion(s) of your image. Many digital
cameras shoot in a 4:3 aspect ratio. If you want 6 x 4 prints, you will
have to crop to that ratio. In a simple case, the entire width can be used,
but the height will be excessive by about 11%. Now, the entire 11% can be
cropped out of the top or the bottom. Or it can be taken from both top and
bottom in any kind of proportion. Again, each image should be individually
evaluated and the crop area should be manually defined, based on the content
of the photo.
Juergen

How to process multiple images and each image has multipl links dynamically

I saw this web site
http://escience.invitrogen.com/ipath/iPath.jsp?cn=united+states&mapid=479&highlightGene=ADAM10
when the small icons in the left map is clicked, the corresponding information of the icon display on the right. For one map, I know I could set up static URL for each gene name. But there are hundards of images, is there a way to dynamically process all the images instead hard code hundards of pages?
Many thanks!

The map is generated using Macromedia Flash. (I could tell because when I right-clicked on it I got a context menu including "About Macromedia Flash Player 8".) That's a programming language you could learn if you liked, but it has nothing to do with JSP.

Process Multiple Files in PSE 7

I'm running PSE7.
I'd like to take a group of images (jpeg's) and do the following to them:
Run QuickFix on them.
Save them as a new file with the name based on the original name plus some extra information.
Resize the jpeg's to a size suitable for the web. Or possibly a little larger.
It would really be great if:
I could use a 'tag' to select the images I want to process.
The tags on the new images are the same as the originals.
The new files are written into the same folder as the original. Even if multiple folders are needed due to
the tags bringing in images from multiple folders.
The new images would become part of a version set or stack along with the originals.
Well, that's what's I'm interested in doing.
Any thoughts would be greatly appreciatted!

The Process Multiple Files command applies settings to a folder of files. If you have a digital camera or a scanner with a document feeder, you can also import and process multiple images. (Your scanner or digital camera may need an acquire plug‑in module that supports actions.)
When processing files, you can leave all the files open, close and save the changes to the original files, or save modified versions of the files to a new location (leaving the originals unchanged). If you are saving the processed files to a new location, you may want to create a new folder for the processed files before starting the batch.
Note: The Process Multiple Files command does not work on multiple page files.
Choose File > Process Multiple Files.
Choose the files to process from the Process Files From pop‑up menu:
Folder
Processes files in a folder you specify. Click Browse to locate and select the folder.
Import
Processes images from a digital camera or scanner.
Opened Files
Processes all open files.
Select Include All Subfolders if you want to process files in subdirectories of the specified folder.
For Destination, click Browse and select a folder location for the processed files.
If you chose Folder as the destination, specify a file-naming convention and select file compatibility options for the processed files:
For Rename Files, select elements from the pop‑up menus or enter text into the fields to be combined into the default names for all files. The fields let you change the order and formatting of the components of the filename. You must include at least one field that is unique for every file (for example, filename, serial number, or serial letter) to prevent files from overwriting each other. Starting Serial Number specifies the starting number for any serial number fields. If you select Serial Letter from the pop-up menu, serial letter fields always start with the letter “A” for the first file.
For Compatibility, choose Windows, Mac OS, and UNIX® to make filenames compatible with the Windows, Mac OS, and UNIX operating systems.
Under Image Size, select Resize Images if you want each processed file resized to a uniform size. Then type in a width and height for the photos, and choose an option from the Resolution menu. Select Constrain Proportions to keep the width and height proportional.
To apply an automatic adjustment to the images, select an option from the Quick Fix panel.
To attach a label to the images, choose an option from the Labels menu, then customize the text, text position, font, size, opacity, and color. (To change the text color, click the color swatch and choose a new color from the Color Picker.)
Select Log Errors That Result From Processing Files to record each error in a file without stopping the process. If errors are logged to a file, a message appears after processing. To review the error file, open with a text editor after the Batch command has run.
Click OK to process and save the files.

URGENT!!! Please help~ Process Multiple Files says folder empty

When I try to use the Process Multiple Files feature, it is giving me a message saying that the process was stopped or cancelled. Press continue or stop. When I click continue, it say that the folder is empty. It is not empty. This is what I use all the time to put my watermark on my photos. I've never had a problem with it before. Any suggestions? Please

Thank you for responding. I am using Windows 8. Since posting this about Process Multiple Images, I have noticed that PSE is not even opening images. It will open the File>OPEN window, and act like it is going to import the image for about 1 second. Then......nothing???? Any suggestions?

How can I re-size multiple images in PSE11 ?

I have used PSE10 to re-size multiple images by selecting the 'Process Multiple Images' option from the drop-down menu undeneath 'File'.
I have just migrated to PSE11 and this option is not available - it is greyed out and cannot be selected.
Anyone got any suggestions ? Thanks.

In PSE 11 you must be in Expert mode (the equivalent of Full Edit in previous versions). Click the word Expert at the top of your screen and it should be available.

RE: [Adobe Reader] when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? i

HelloThank's for your helpsI hope this document is helpfulBest Regards,
Date: Sun, 22 Jun 2014 17:10:17 -0700
From: [email protected]
To: [email protected]
Subject: when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
    when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
    created by Anoop9178 in Adobe Reader - View the full discussion
Hi,
Would it be possible for you to share the document?
Regards,
Anoop
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
     To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

thank's for reply and your help
i did the step's that you told me but i still have the same problem
                                 i have the latest v.11.0.7
i
i disable the protected mode

Js-error while executing Multiple Image Upload wizard

If i want to save the configured window of Multiple Image Upload with Save to Database wizard i get this js-error: "While executing onClick in MIUploadWSaveWizard.htm, a JavaScript error occured".
can someone help?
thanx
peter

That again would be more of a question for the Cold Fusion group.
Try http://forums.adobe.com/community/coldfusion/coldfusion_administration
Those people will be able to help you out more.
Brad Lawryk
Adobe Community Expert, Dreamweaver
Adobe Usergroup Manager, Northern British Columbia Adobe User Group

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.

When i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th

when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ?
if you can help me thank's
[email address removed by host]

thank's for reply and your help
i did the step's that you told me but i still have the same problem
i have the latest v.11.0.7
i
i disable the protected mode

After upgrading to Lion Image Capture does not work, even though it is intel software. Gives error 9931. What gives?

After upgrading to Lion, Image Capture does not work, even though it is intel software. Gives error 9931. What gives?

Ouch, if it is indeed damaged, then sadly you need to restore the whole danged huge OS!
Didn't used to be this way before Lion/10.7.
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

Process Multiple Images gives Error.

Similar Messages

Maybe you are looking for