Process must contain a start activity with no 'in' transitions.

382: Design Validation generated 1 warning(s). You may save invalid definitions but they should not be used in running process.
352: Process must contain a start activity with no 'in' transitions.
What it mean ???

Does the activity that you have marked as a 'Start' node have any in transitions?
Does the little green arrow appear on the icon to show that the property has been set correctly?
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

Similar Messages

Workflow Activity with no Incoming Transition

What does workflow do when it encounters an Activity with no incoming transitions? I have a massive workflow , somewhere in the middle there is a "reProvision" Activity but nothing transitioned TO it. All transitions are out going.

In my experience, unless the activitiy is the "start" activity, it won't do anything at all with an activitiy that's not transitioned to. When executed the taskInstance will follow the workflow transitions and bypass the island activity.
~ tim

Why does a BPM Process fail at the Start Activity?

Hello All,
We're currently working on a Dev environement (WLS 10.3), where we're experiencing issues with BPM Processes that fail at the start node. The error observed is a "Null Pointer Exception" despite there definteily being parameters passed into the process.
I've observed the trace in the EM after invoking the process and notice that the process fails as soon as it enters the start activity.
One of the possible explanations could be an out of memory issue. Has anyone experienced this before?
BPM : SOA Suite 11g.
Thank you.

If you have memory - issues, you should look at the Weblogic-logs.

Process Stuck at Start Activity

I have a BPM process (11g) that is being called by another application as a service. Whenever my process is invoked, it just gets stuck at the Start activity. The invoking application is passing some parameters to the process. Has anyone run into this problem before where the process is stuck at the Start activity? If so, what kind of things should I look at to debug this issue?
Thanks.
-muktech

So can you see the instance of the process created in Enterprise Manager? If so, does it get stuck in Running mode or does it resolve to Completed or Faulted ever?
If it completes, you should be able to see the data and look at your BPM flow with the path the instance took highlighted. If it faults, then you will most likely not be able to see any of this data because you won't be able to open the instance.
Make sure that Enterprise Manager is configured in Developer mode, not Production. This way it will save the XML data at every stage of the process.

Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profil

Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)
OK. This is a new outlook setup on a laptop. The mail account is on a MS Exchange Server 2010. The user can log on to their laptop no problem with their AD login and password. To setup the outlook profile we have checked the name OK. When we click finish
and try to start outlook we get the above error message. It is driving me pots as I have tried also of things. I have tried to connect without catching the files. The error message then says that the Exchange Server is down, yet we checked the name OK and
I can log on to the MS Exchange server and see the setup.
What else is it that I need to look at as I have tried everything. I will add that they one service I see not running is the Exchange RPC service. If I try to start it, it fails saying Some services stop automatically if they are not in use by other services
or programs.
What can I do?

The major cause of this problem is a corrupted Navigation Pane settings file – profilename.xml, where “profilename” is the name of your Outlook profile. A good sign that the
file is corrupted is when the size of the file is shown 0 KB. No one knows the precise reason why this takes place, but all versions of Outlook from 2003 to 2013 may get affected.
Other causes may be when you run Outlook in the compatibility mode, or if you are using a profile generated in an older Outlook version, or if the Outlook data file (.pst or .ost)
was removed or damaged as the result of faulty uninstallation or reinstallation of MS Outlook.
Follow the steps given below to resolve this problem
1. Recover Navigation Pane configuration file
2. Repair your Outlook PST file using Inbox Repair tool
3. Create a new Outlook profil and import data from the old PST file
4. Turn off Compatibility Mode
5. Start Outlook in Safe Mode
For more info, you can visit http://www.ablebits.com/office-addins-blog/2013/12/06/cannot-start-microsoft-outlook-solutions/

HT201210 nowadays have many user have problem with update to ios7 and need active with apple id maybe in the future in order escape from these problems must be stop use these products else. Because of simple user don't know about this technology and somet

nowadays have many user have problem with update to ios7 and need active with apple id maybe in the future in order escape from these problems must be stop use these products else. Because of simple user don't know about this technology and sometime just hear from other user that it 's difficult to use then force they change phone that use to handle to another.

It is a feature to discourage the theft of iPhones by making them useless if resold. It's not going anywhere. It's simple: just don't buy a phone until you make sure that the activation lock has been disabled.

Why does plugin-container.exe not start up with Firefox 3.6.15 anymore?

I have Firefox 3.6.15, Firefox 4.0 RC1 and Pale Moon 3.6.15 on my PC. Even though each .exe file is in a separate folder, if I start up say, Firefox 4.0 RC1 for awhile and then close it and start up Firefox 3.6.15 my settings are messed up and I have to fix some of them. I just noticed in Task Manager that plugin-container.exe does not start up with FF 3.6.15 and FF 4.0 RC1 and Pale Moon 3.6.15 anymore. I'm not sure what I did to cause this. I even went into Mozilla's folder and tried to start up plugin-container manually, but it does not start up. I'm at a loss, do I have to do a clean install of three browsers to fix this?

It is caused by Firefox asking plugins like Flash to remove their cookies and other locally stored data.
Flash Local storage settings Help:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/help02.html

DRM Process Manager failed to start with error Timeout starting the following process: NetJNIBridge.

When we Start the DRM DRM Process Manager failed to start with following error
[Process ID: 3948, Thread ID: 1, Process Manager]
Error loading the NetJNIBridge host process on machine: EU9SC1WNW001
System.Exception: Error loading the NetJNIBridge host process on machine: EU9SC1WNW001 ---> Oracle.Drm.Exceptions.ResourcedException`1[Oracle.Drm.Messages.MsgsProcessManager]: DRM-61028: The following unexpected error occurred communicating with URL 'EU9SC1WNW001': DRM-61023: Timeout starting the following process: NetJNIBridge. DRM Process ID: b3e602fa-f6c1-abcc-4af7-c0a99b51b235
at Oracle.Drm.ProcessManager.Program.ServiceMethod(String machineName, UInt16 port, Action`1 action)
at Oracle.Drm.ProcessManager.Program.StartNonEngineProcesses()
After 11.1.2.3 DRM upgrade

OS:linux
i am getting error in installing OPMN manually
when trying to installing OPMN manually getting error i.e,
opmnctl: starting opmn and all managed processes...
opmnctl: opmn start failed
when checked opmn/logs:
opmn.log is empty
ons.log showing error ie:
13/06/17 19:22:45 [4] ONS server initiated
13/06/17 19:22:45 [2] 10.209.178.16:6200 - thread create failed
ipm.log shoeing error i.e:
13/06/18 11:58:04 [4] OPMN server ready. Request handling enabled.
13/06/18 11:58:16 [4] PM state directory exists: /u02/app/orapp/product/10.1.2/opmn/logs/states
13/06/18 11:58:16 [4] PM state file does not exist: /u02/app/orapp/product/10.1. 2/opmn/logs/states/.opmndat
any idea why it is showing error??

Process/Production Order WIP Reverse on Month starting date with postiing d

Hi Experts,
Is it possible to reverse the WIP of Production/Process Order at month starting date eg. 01/07/09. Posting date & Document date should be: 01/070/09.
In my current project production is batch management system. Some of the batches start at month ending days (Eg. 29/06/09) for we calculated WIP at dated: 30/06/09.
My Client wants to reverse that WIP next day, month starting hours Eg. 01/07/09 but while reversing the WIP system is posting the WIP reversing doc. posting date is 31/07/09.
Same batch which started production on 29/06/06 is closed at 03/07/09 as well as goods received same date. FG Stock A/c updated in accounting books.
At the same day If I print my trail balance system showing the Stock value double (WIP stock as well as FG stock)
First Month
Eg. Process Order WIP at 30/06/09                              : 50000/-INR
Second Month
      WIP Reversal Posting date:31/07/09 by system     : 50000/-INR
      FG Stock received at 03/07/09                               : 50000/-INR
If I Print Trail Balance on 03/07/09 system shows        : 1, 00, 000/-INR (based on Posting date)
Which is wrong..
Please tell me the way for Change the Posting date of WIP reverse document. OSS guys are replying as consulting issue.
I am waiting for your valuable reply.
Thanks & regards
Bhagiradha

In KO88, CO88 Select Menu bar Extras-> Posting date
Enter Posting and execute
Thanks for Rajesh (SAP Labs)
Thnaks & Regards
Bhagiradh

HTTP response contains status code 403 with the description Forbidden

Hello all,
I have configured a simple scenario like this:
File ftp Adapter -> XI -> File ftp Adapter
I activate the communication channel to start the message processing. Then I am able to see my messages in transaction SXMB_MONI in the XI Integration server but I get the error message mentioned in the subject of this thread.
When I look at the message processing details I got the following informtion in Call Adapter -> SOAP Header -> Error:
<?xml version="1.0" encoding="utf-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
    <SAP:Category>XIServer</SAP:Category>
    <SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
    <SAP:P1>403 </SAP:P1>
    <SAP:P2>Forbidden</SAP:P2>
    <SAP:P3/>
    <SAP:P4/>
    <SAP:AdditionalText>&lt;!DOCTYPE HTML PUBLIC &quot;-//W3C//DTD HTML 4.0 Transitional//EN&quot;&gt;
          &lt;html&gt;
          &lt;head&gt;
          &lt;title&gt;Error Report&lt;/title&gt;
          &lt;style&gt;
          td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;}
          A:link
          A:visited
          A:active
          &lt;/style&gt;
          &lt;/head&gt;
          &lt;body marginwidth=&quot;0&quot; marginheight=&quot;0&quot; leftmargin=&quot;0&quot; topmargin=&quot;0&quot; rightmargin=&quot;0&quot;&gt;
          &lt;table width=&quot;100%&quot; cellspacing=&quot;0&quot; cellpadding=&quot;0&quot; border=&quot;0&quot; align=&quot;left&quot; height=&quot;75&quot;&gt;
          &lt;tr bgcolor=&quot;#FFFFFF&quot;&gt;
         &lt;td align=&quot;left&quot; colspan=&quot;2&quot; height=&quot;48&quot;&gt;&lt;font face=&quot;Arial, Verdana, Helvetica&quot; size=&quot;4&quot; color=&quot;#666666&quot;&gt;&lt;b&gt;&amp;nbsp;&amp;nbsp;403 &amp;nbsp Forbidden&lt;/b&gt;&lt;/font&gt;&lt;/td&gt;
          &lt;/tr&gt;
          &lt;tr bgcolor=&quot;#3F73A3&quot;&gt;
         &lt;td height=&quot;23&quot; width=&quot;84&quot;&gt;&lt;img width=1 height=1 border=0 alt=&quot;&quot;&gt;&lt;/td&gt;
         &lt;td height=&quot;23&quot;&gt;&lt;img width=1 height=1 border=0 alt=&quot;&quot;&gt;&lt;/td&gt;
         &lt;td align=&quot;right&quot; height=&quot;23&quot;&gt;&lt;font face=&quot;Arial, Verdana, Helvetica&quot; size=&quot;2&quot; color=&quot;#FFFFFF&quot;&gt;&lt;b&gt;SAP J2EE Engine/6.40&amp;nbsp;&lt;/b&gt;&lt;/font&gt;&lt;/td&gt;
          &lt;/tr&gt;
          &lt;tr bgcolor=&quot;#9DCDFD&quot;&gt;
         &lt;td height=&quot;4&quot; colspan=&quot;3&quot;&gt;&lt;img width=1 height=1 border=0 alt=&quot;&quot;&gt;&lt;/td&gt;
          &lt;/tr&gt;
          &lt;/table&gt;
          &lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;br&gt;
          &lt;p&gt;&lt;font face=&quot;Arial, Verdana, Helvetica&quot; size=&quot;3&quot; color=&quot;#000000&quot;&gt;&lt;b&gt;&amp;nbsp;&amp;nbsp;You are not authorized to view the requested resource.&lt;/b&gt;&lt;/font&gt;&lt;/p&gt;
          &lt;p&gt;&lt;font face=&quot;Arial, Verdana, Helvetica&quot; size=&quot;2&quot; color=&quot;#000000&quot;&gt;&lt;table&gt;&lt;tr&gt;&lt;td valign=&quot;top&quot;&gt;&lt;b&gt;&amp;nbsp;Details:&lt;/b&gt;&lt;/td&gt;&lt;td valign=&quot;top&quot;&gt;&lt;PRE&gt;No details available&lt;/PRE&gt;&lt;/font&gt;&lt;/td&gt;&lt;/tr&gt;&lt;/table&gt;&lt;/font&gt;&lt;/p&gt;
          &lt;/body&gt;
          &lt;/html&gt;
</SAP:AdditionalText>
    <SAP:ApplicationFaultMessage namespace=""/>
    <SAP:Stack>HTTP response contains status code 403 with the description Forbidden
          XML tag Envelope missing in SOAP message header (SAP XI Extension)
</SAP:Stack>
    <SAP:Retry>M</SAP:Retry>
</SAP:Error>
Does anyone have a hint for me how to solve this issue?
Thanks in advance
Fabian

Hi,
This error may be because of Inactive Services in internet communication framework-
Go to SICF transaction and activate the services. Have a look into SAP note-517484
SO because of huge message this may be the reason.
Hope this helps,
Regards,
Moorthy

Dequeing from AQ in a non-start activity

Hi everybody,
I have the following pattern:
Process 1:
<process>
<enqueue AQ CorrelationID = '1'/>
</process>
Process 2:
<process>
<receive start activity/>
<dequeue AQ CorrelationID = '1'/> 
</process>
The idea behind is that I must dequeue from my AQ in a non-start process activity.
So I tried to setup the AQ adapter with a CorrelationID = 'dynamic' (unused) in the AQ adapter wizard and then to modify the CorrelationID dynamically, at runtime, using the AQ header.
As my activity is not a start activity I have setup also an internal BPEL CorrelationSet based on the AQ payload.
Unfortunately my BPEL process is not consuming any message from the queue.
Is there any way to get this working? How may I dequeue from an AQ in an non-start activity?
I'm using the AQ Adapter from BPEL 10.1.2.0.2. Is there any change in BPEL 10.1.3.1.0 concerning this issue?
Regards,
amo

Yes you can use your web start application console. To enter data which is required for your application it is better idea to use java application which runs in console mode althou you may try to run console of windows and then read data from its input stream.

OPMN Process Manager failed to start - libmodapi.so libclntsh.so not found

Hi all,
I am completely new to Oracle in its entirety. I am trying to install Oracle Enterprise Manager Grid Console 10.2.0.1.0 on Oracle Enterprise Linux 5.1 through the OUI using the new database install. When I get to setting up the Oracle Application Server, it tells me the OPMN Process Manager failed to start, tells me to check the logs in /oms10g/opmn/logs, and to start OPMN manually before hitting retry.
The log files in that directory do not seem to contain any errors.
When I run ./opmnctl stopall, ./opmnctl startall, ./opmnctl status, I get no obvious errors, and then the following:
DSA ~ DSA ~ Down
HTTP_Server ~ HTTPServer ~ Alive
LogLoader ~ logloaderd ~ Down
dcm-daemon ~ dcm-daemon ~ Down
OC4J ~ home ~ Alive
WebCache ~ WebCache ~ Alive
WebCache ~ WebCacheAdmin ~ Alive
When I do ./opmn start I get the following:
./opmn: error while loading shared libraries: libmodapi.so: cannot open shared object file: No such file or directory
When I do a ldd ./opmn I get the following errors:
libmodapi.so => not found
libclntsh.so.10.1 => not found
I am assuming my problem is that these two libraries are not linked in. I have looked through the forums, and found closely related threads, but none that seemed to help, most notably changing my PATH. If anyone has any suggestions, I would welcome them. Thanks for your help.
Sincerely,
Don

Hi All,
We all agree that best practice involves a test installation. My original post was about a problem I was having with the creation of my test bed. I did create my own manual, which I am sure is not the best manual ever created, but does work to get the software installed. If it is proven out, I will post it to try and return something to the community.
In order to do this, I needed to read thousands of pages of documentation so far, which does not even scratch the surface of the total amount on OTN. I am still revising my instructions as I find that the documentation commonly assumes the reader has been installing Oracle for some time and is fully aware of all the appropriate acronyms and the entire logical and physical structure of the database. In order to just read many of the documents, I had to draw out a map of Oracle on a whiteboard as I went. As a systems administrator, should I have to search through all those papers, manuals, the web, etc. and try to gain an advanced DBA understanding to get a working default installation? Perhaps it seems like I am just a new user who is whining, but how many programs can you think of where this type of effort is required?
In looking at the relationship between the DBA and the Systems Administrator, where should we draw a line between their tasks?
Should the DBA have to learn how to assess appropriate server hardware, and then install and administrate every flavor of Windows, UNIX, Linux, etc. in any given environment? Should a DBA be required to build a Linux kernel, configure Active Directory, or install Solaris before installing Oracle?
Should the Systems Administrator have to learn the nuances of installing and optimizing Oracle databases in order to just put the base software on the system and configure the kernel so it is ready for a DBA?
More interesting, as stated above, I could hand you the Gentoo Handbook, and without knowing a single thing about Gentoo Linux, you would have a default installation of the Gentoo OS. You could also grab step-by-step instructions for a default installation of MySQL on Gentoo, or a myriad of other programs, for that matter. This would hardly replace the Gentoo systems administrator or MySQL DBA, but it does serve a very valid purpose of enabling the systems administrator and DBA. Shouldn’t Oracle have something similar?
I would think the Systems Administrator knowledgeable in the OS and Kernel should be able to perform the first half of the installation task where they are more likely to be an expert, and then allow the DBA to create and optimize the databases they install, which they in turn can spend years learning how to do. Time that the DBA spends learning the OS or time the Systems Administrator spends learning Oracle is valuable in the long run, but it is also extra time to get the initial database up and running. One of the largest reasons IT personnel exist at all is to keep users from having to spend too much time learning about their computers to get their work done. Shouldn’t this also translate between IT groups?
Databases are one of the few software installations that systems administrators commonly don't have to maintain on corporate servers. The best comparison I know of is web services. In this manner web servers are very similar, and are commonly installed by a team as well. I am perfectly capable of creating a default install of Apache, Tomcat, or IIS from step-by-step instructions provided by Apache or Microsoft without much more tailored information than the IP address and system name we are going to use to fill in the blanks during the installation.
While I have performed the role of sole IT staff at a small software engineering company, and have therefore been the SysNetWebSecDB admin hydra in the past, in larger companies there seems to be no problem with having the system administrator create a default installation of Apache or IIS, having the network team configure the switches and DMZ, and having the web team customize the server and design the site without each of them having to know everything.
So the above is a good idea and I would encourage
them to do it because after that, it makes them
stonger than when they use an already completed one
to install.Sometimes there is time to sit down and read all the instructions and become a more robust IT professional. Sometimes there is only time to read the Getting Started section and you have to read the full instructions and optimize later if there is time. Sometimes you have outside influences that mean it has to get done in less time than it should, whether or not the justification for rushing is reasonable.
Should I plan to read every knowledge base article ever published by Microsoft in order to create a test bed installation of Windows 2008? Honestly, I’d still be reading the NT4 docs.
Not only does not every business have a DBA, or the money to hire one, sometimes the business does not want to do so, or sometimes the security is such that the DBA is not part of the unit allowed to utilize administrative access on the servers. That doesn’t mean they don’t need a database tomorrow.
As an IT professional, I will never be able to come close to encompassing the amount of knowledge I actually could use to do my job. I try to specialize in a few areas so that I have the ability to keep up with the exponential rate of IT expansion, but I basically consider a vast part of my job being constantly thrown into the deep end, and, fair or not, getting things done anyway. Hopefully that makes me good at my job. The question is how much time and effort I should need to apply before I can get to a reasonable starting point where everyone else can do their work too.
There
is normally no single document to achieve or complete
and installation unless the bespoke type. Apart from
the Install Guide, there could be Readme, Release
notes, Adendum etc. While I noted in a previous post that I shouldn't be too hard on Oracle in trying to document such a massive effort, that doesn’t mean that their documentation doesn’t need work. Why is the documentation for a single product spread out over tens of thousands of pages? It should be obvious that this has resulted in redundant and often conflicting documents, including the dozen readme documents in the installation files, the readme documents in the installed files, the install guide, the readme and addendum for each of those, the release notes for each of those, and a new set for each patch.
Obviously, for any installation, I need to complete a document for my own environment that contains the proper network configuration for our own LAN, or the proper partitioning. I do this for any program. Oracle needs me to change the name of the OS install to get their installer not to error out on their own OS. If OFA is so desirable, why not make the default install explain and follow OFA? Basic issues like this are highly avoidable, and shouldn’t be seen by the end user, even if in this case the end user is a highly technical audience capable of adjusting.
It will hard to get a single document because they
will be platform dependent and what someone did in
their install, may not always work everywhere.Again, please note that Oracle has "released" an OS that they intend for people to use on their Oracle validated hardware as a premier platform for their Oracle database. It isn't a stretch to feel that Oracle should then be able to provide valid, step-by-step instructions for a default installation of their own software, on validated hardware, on their own OS. I’m not expecting an optimized and populated database, but if the hardware, OS, and software are all under Oracle’s control, there aren’t really any variables other than machine name and IP address for a default install.
Hopefully my current knowledge will work for the time being, and I will be able to optimize appropriately in the future as I can.

PeopleSoft 8.49 "URL Must Contain domain"

Hello All,
First of all, thank you for reading this subject.
I have to migrate servers from an Active Directory to Another.
on the Active Direcoty, i've got few R&D PS servers.
my job is not to know how works PeopleSoft but migrate it.
So I have no competency on this product.
i have make a migration test and since the migration, each time I connect to PS I've got the following message:
URL must contain MyOldDomainName
I browsed the forum and found a lot of informations:
Your URL must contain domain ".peoplesoft.com
Issue with PeopleSoft Sign-on url....not able to get the signon page
But the problem still exist.
this is the configuration:
- PeopleSoft Enterprise 8.49
- Weblogic Server 9.2
- MS SQL 2005
- Windows 2003 server
i have first edit a lot of files:
When I edit the host file, I'm able to connect if I enter the old URL with the old Windonws domain name.
in a file config_prop
D:\PT8.49\webserv\peoplesoft\applications\peoplesoft\PORTAL\WEB-INF\psftdocs\ps\webprof\config_prop
i have replaced all occurences to my old Windows Domaine by the new one.
I have done the same with the following option_prop file:
D:\PT8.49\webserv\peoplesoft\applications\peoplesoft\PORTAL\WEB-INF\psftdocs\ps\webprof\option_prop
i have deleted the cache portal:
D:\PT8.49\webserv\peoplesoft\applications\peoplesoft\PORTAL\ps\cache
and replace all occurences of my old windows domain name in the database by the new one.
When I restart PeopleSoft, my file config_prop and my database are updated by I don't know what, and the problem still exist.
I'm clearly lost and I don't know where to search.
So, I send an SOS!
Thank you in advance for your help.
best regards,
Vincent.

Hi,
The authentication domain is set in the webprofile.
The webprofile can be found in file configuration.properties, to be found in [PS_HOME]\webserv\peoplesoft\applications\peoplesoft\PORTAL.war\WEB-INF\psftdocs\[site] and contains an entry like
# The next three fields must be valid for the database referred to in psserver.
# WebProfile is the name of the profile used to configure this web site.
# The user id and password are the values used to get the profile.
# NOTE: If you change the password of this user in the database then
# run the PSCipher script with the new password and paste the encrypted output here.
# The pre-delivered profiles are: DEV, TEST, PROD, and KIOSK
# DEV has standard developer options set
# TEST has standard testing options set
# PROD has standard production options set
# KIOSK is like PROD but has additional settings relevant to KIOSK usage
## sd="Web Profile", dt="dx", ld="The web profile is a named group of configuration property settings that the portal applies throughout your PeopleSoft system to control all portal-related behavior.", tip="This may be set to DEV, TEST, PROD or KIOSK. Additional web profiles may be delivered and created for your application"
## option(va = DEV, sd="Standard developer option set")
## option(va = TEST, sd="Standard testing option set")
## option(va = PROD, sd="Standard production option set")
## option(va = KIOSK, sd="Similar to Production but has Kiosk option set")
WebProfile=PROD
This webprofile has an authentication domain set in the database.
You can start by trying to set the webprofile to another (which might not have an authentication domain set) (DEV ,TEST, PROD, KIOSK )
Bounce the webserver and after this you should be able to login to PeopleSoft (without an domain (http://server:port/ps/signon.html)) and change the authentication domain on the original webprofile to the new domain name.

Firefox will not open at all, and wen I try to uninstall it tell me that Firefox must be closed to proceed with te uninstall even though it is not open.

I click on Firefox and notihing happens. I have tried to uninstall the program so that I can reinstall it, but wen I try that, it tells me
"Firefox must be closed to proceed with the uninstall. Please close Firefox to continue."
But the program is not running. It won't let me open it either. I have college lectures that can only be viewed on Firefox, so I am not able to do my homework. Please help.

This may be a number of things, but conflict is most common, so here are some suggestions that may help you get to the bottom of the matter:
Be sure that a firewall is not blocking the startup of Mozilla. Some firewalls will come with "self defense" mechanisms for spyware/malware, but these programs can also isolate useful programs as well. Norton 360, Comodo Internet Security, Zone Alarm, AVG antivirus and McAffee Internet Security Suite incorperate these methods among several others.
Basic solution: To get around this type of blocking you will have to disable the self defense mechanism in your firewall or add an exception for firefox.exe.
In depth instruction for Windows users:
''''''This may be hard to follow, because the posting tool does not recognize spaces, but here goes...THIS IS NOT FOR THE FAINT HEARTED.''''''
1)Open the mozilla browser. When nothing happens...go to next step.
2)hold CTRL, ALT and the DELETE key together. In XP you will get an immediate task manager window...Go to next step. Under Vista or Windows 7 you will get a login screen that has a START THE TASKMANAGER button at the bottom. You will push this button then go to the next step.
3)In the Windows Task Manager click the Processes tab.
4)Run down the list and find all occurrences of firefox.exe
5)right click each firefox.exe and from the drop down list choose End Process Tree then answer YES or OK to the prompt box.
Firefox is now closed...Now we can determine the issue.
6)Start firefox in safemode by clicking on START or the WINDOWS ORB to open the START MENU.
7)Choose ALL PROGRAMS or PROGRAMS
8)Find the MOZILLA FIREFOX folder and click on it
9)Choose Mozilla Firefox (Safe Mode).
10)When the prompt box appears check the boxes next to the following:
a)Disable all add-ons
b)Reset toolbars and Controls
c)Reset all user prefrences to Firefox defaults
11)Click on the CONTINUE IN SAFE MODE BUTTON at the bottom.
If firefox opens, you have a plug-in that is causing your issue. If it does not then repeat steps 1-5 and then move on to step 12.
12)After all instances of firefox.exe have been ended, go to START and choose CONTROL PANEL from the start menu right hand side. XP users go to step 13...Vista users choose SWITCH TO CLASSIC VIEW on the left hand side then go to step 13...Windows 7 users choose USE LARGE ICONS from the drop down list at the upper right hand side then go to step 13.
13)Double click the WINDOWS FIREWALL icon (around the bottom of the list) and check to see if it is ENABLED. If it is not enabled, Enable it. Windows 7 and Vista users: Answer YES to enable this option ANYWAY, if you get a prompt warning of dual firewall conflicts then move on to step 14.
14)Find your security center icon in the taskbar, Usually next to the clock. Right-Click the icon and choose EXIT, DISABLE (Temporarily), or CLOSE.
15)Once you are sure that your Security Suite/Antivirus software is disabled, then Start Firefox in regular mode.
If firefox opens, you have a firewall or defense conflict and need to get your documentation to find out how to allow EXCEPTIONS to the software or internet access list. You can use firefox with these settings in the meantime, but you will not have antivirus protection. Free antivirus-only programs are available at the following locations:
-----http://antivirus.comodo.com/antivirus.php
-----http://free.avg.com
-----http://www.avast.com/free-antivirus-download
NOTE: If you choose to use an antivirus only program in conjunction with windows firewall, you must remove any other antivirus programs from your computer and restart the system BEFORE you install the new antivirus software or you WILL have problems with your system SPEED and FUNCTIONALITY. Do so by going to START then choose CONTROL PANEL then choose ADD OR REMOVE PROGRAMS in XP or PROGRAMS AND SETTINGS in Vista or Windows 7 then find you program in the list. Right click it and Choose UNINSTALL or REMOVE. Be sure to RESTART the system BEFORE you choose to install the new software.
If NONE of the above has worked, then you very likely have a corrupted installation or your system may be comprimised by RootKIT or Trojan infection.
Please download and complete a full scan with the tool below. REMOVE ANYTHING IT FINDS then restart the system and remove and reinstall firefox then attempt to open it again:
http://support.kaspersky.com/viruses/avptool2010?level=2
Good Luck to all. I hope that his has been helpful.
Gill
Senior Tech
PC VICE
-----www.pcvice.com

How can I start anew with Photos and clear the (minimal) stuff it has uploaded

I've about had it up to here with this new Photos scheme. I reorganised my Aperture libraries on both my iMac and MBA in preparation for this, delayed turning Photos on for a couple of days until I thought everything was ready based upon the limited advice that was out there, and then got stuck in an endless loop of "uploading" and "preparing" every time I opened Photos. There are 19,975 images in my Aperture library on the iMac. I was stuck at Uploading at anywhere between that number and 19,000 with no progress after hours of waiting. I tried all the tricks mentioned here including re booting, restarting the app, repairing/rebuilding the database, killing the "cloudd" process, etc.today Today when I restarted Photos, it now said I had 23,775 images to upload- 4000
more than I have-and of course it got stuck there, like it has for the last week.
I copied the previous Aperture library (pre Photos migration)back to my iMac and opened it in Aperture. Thankfully, all the photos I had taken on my iPhone this week during this Photos clusterphuck transition were in the Aperture Stream so I didn't lose any of those. I'm willing to give this whole thing one more shot. So i need some advice. How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
<Re-Titled By Host>

How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
It is hard to say from your post, why the migration did not succeed in your case.
by "stuck on upload" do you mean, you opened the Aperture library in Photos, and Photos converted it to a Photo Library, and then the upload to iCloud Photo Library did hang? Or did already the upgrade to the Photo Library fail?
If you want the Aperture library to upload to iCloud Photo Library, it needs to be on a disk formatted MacOS Extended (Journaled) and the original image files must not be referenced. Referenced originals will not upload.
Also, the upload may hang, if you do not have enough free iCloud storage, orr if one of the videos or photos in your library is in an unsupported format or corrupted.
To start over, try to repair and rebuild the Aperture library before opening it in Photos. Try all Aperture Library First Aid options - starting with repairing the permissions. (Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual)
If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
You will have to delete the photos that are already in icloud too; otherwise you are risking duplicates.
Can you launch Photos at all? If yes, delete all photos in Photos and empty the Recently Deleted album. Wait for the deletion to sync to iCloud. Then delete the Photos.photolibrary.

Process must contain a start activity with no 'in' transitions.

Similar Messages

Maybe you are looking for