Process Orchestration - Configuration Wizard "Process Integration and Orchestration Package" shows running

Hi SAP Gurus,
I have installed an SAP PO system and am running the Config Wizard from NWA. The functional unit I have selected from NWA is - "Process Integration and Orchestration Package". This functional unit has in turn selected few more functional units like AEX, SLD. The issue that I am facing is that the wizard does not appear for my inputs and it shows that the selected wizards are running. Please see attachment "config_wizard_running.jpeg"
I read some forums and found a thread where in it was mentioned how to stop the config wizard and restart it. http://scn.sap.com/thread/1422958
Even after restarting my server, the functional units are still showing as running in NWA --> Configuration --> Scenarios --> Configuration Wizard --> Functional Unit Configuration UI. Please see attachment "Config_wizard_stuck.jpeg"
I restarted the application as suggested in the post so that I could run Config Wizard again. But its now allowing me to start it as the status is Running.
Please suggest.
Regards,
Amit

Hi Dimitri,
Thanks a lot. I have resetted the functional units. This time the wizard comes up ok.
Regards,
Amit

Similar Messages

Could not start Configuration wizard in Integration Builder - Configuration

Hi SDN,
I am New to XI,
I have gone through 4 scenarios of XI in a system where Xi is up and running sucessfully.
Now one of my colleague Installed ECC5 with XI in our local server.
I need to do a File 2 File Scenario, for which I could create Product, component, Technical System and Business System in SLD.
I could Create a Name space, Message types and Interfaces in Integration Builder - Design
But When I open Configuration Wizard, Internal Communication in Integration Builder- configuration, it is giving a exception : java.lang.NullPointerException.
Can any one help me in resolving this.
Thanks in advance,
Regards,
Sai.k.k
Message was edited by:
Konchada Sai Krishna

Hi,
In Exchange profile chack the SLD , http port for Integration Bulder properties.like IR,ID , i hope it will try to check for the SLD info , if it is the first time of XI using , you need to check in Exhcnge profile .
if it is not the first time then refresh the SLD cache..
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
for cache refresh
/people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off - SXI_CACHE - Ripped Off
XI Runtime cache error: Cache contents are obsolete
Cache Refresh - SAI_CACHE_REFRESH
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
Regards
Chilla

SMD Agent Configuration Wizard for CI and DB host

Hi, I have to config the CI host in /smd > managed systems > setup wizard. But what is with my agends from other hosts then CI like DB host? Do I have to do somthing else with the Agents from this hosts? At the moment this agens have the status <no server name> in smd/go/ADMIN_AGENT

Hello,
After you connect the agents to the Solution Manager they will appear as No Server Name in Agent Administration.
Run the setup wizard for the managed system, select the agent before processing further. This will assign the agent to a server name.
Best regards,
Guilherme

Need Configuration File (fsisys,fsiuser and afgjob) details for running a XML in documaker 12

Hi,
          I need basic configuration details for running a simple xml in documaker 12. Details like printer,recipient configuration,etc.

Hello Sen,
You might want to set the below XML-related configuration sections besides doing the general DB Handler and Library setup that is required for Documaker 12.x version. The Printer configuration may not require changes from the flat-file extract mode. Make sure the afgjob entry ;BatchingByRecipINI;;; is in place too.
< ExtractKeyField >
SearchMask = 1,<?xml
[ RECIP_NAMES ]
ZERO=000,
FC=101,FULL COPY
< BatchingByRecip >
DefaultBatch = BATCH1
Batch_Recip_def = !//RecipientRecord[RecipientDescription="Full Copy"];"BATCH1";FC
< RUNMODE >
   NAUNLOAD = Yes
   XMLExtract = Yes
   DownLoadFAP = Yes
   ChkDstLenExceeded = No
   LoadCordFAP = No
   CheckNextRecip = No
   CompiledFAP = No
< TRN_Fields >
    SystemInd = !//TransactionRecord/TransactionKey/SystemIndicator
    TransactionNum = !//TransactionRecord/TransactionKey/TransactionNumber
    LOB = !//PolicyRecord/LOB
    Iteration = !//TransactionRecord/TransactionKey/Iteration

ADS configuration wizard has errors in CE 7.2?

Just installed CE 7.2 (JAVA only) and deployed Adobe Document Services. I tried to use the configuration wizard for ADS and 3 steps errored out for the following reasons:
STEP: MAINTAIN ABAP TO ADS CONNECTION - ERROR: JCO_ERROR_FUNCTION_NOT_FOUND: DEST_EXISTS
STEP: CONFIGURE LOGICAL PORTS FOR WEB SERVICE CONSUMER PROXIES - ERROR: Not able to load Function FPRFC_CONFIG_LOGPORTS (cause:Function template FPRFC_CONFIG_LOGPORTS could not be retrieved.).
STEP: CREATE CONNECTION DEPENDENT CONFIGURATION (FPCONNECT) - ERROR: Not able to load Function FPRFC_CONFIG_FPCONNECT (cause:Function template FPRFC_CONFIG_FPCONNECT could not be retrieved.).
Has anyone used the configuration wizard successfully in CE 7.2 for ADS?
Does anyone know what these errors mean?
Thank you!

I am closing this. I found out that you can only use the wizard if you have an ABAP+JAVA double stack system. I did the configuration manually and it worked.

Solman HP- ALM Integration and Business Process Configuration

Hello Solman Experts,
Can anyone provide me the links/docs/materials/SAP application Help/Wiki etc for Solution Manager to
HP-ALM Integration and Business Process Mapping/Configuration.
Thank you in advance and waiting for the answers.
Regards,
Eswaran

Hi
check below blog for this
End to End testing with HP ALM 11 and SAP Solution Manager 7.1
thanks
Prakhar

External Driver Configuration for Process Integration 7.10

Hello colleagues,
I need connection the External Driver Configuration for Process Integration 7.10. Where is the how to?? The PI is 7.10 and bbdd is Oracle.
Regards.

Hello Victor
You will easily find the answer to this by searching the forum. Use the search terms "jdbc driver 7.10".
Please search the forum first before opening a thread. If you don't find the answer then open a new thread.
Regards
Mark

DHCP Split-Scope Configuration Wizard showing error "Not enough storage is available to process this command".

Hi,
I'm trying to split the DHCP scope between two Servers using the DHCP Split-Scope Configuration Wizard.
Server one is a VM hosted on Hyper-V and is running Windows Small Business Server 2008 (I think this was previously SBS2003 and was upgraded at some point in time). The whole DHCP scope is currently configured on here.
Server two is a VMware VM running Windows Server 2012 R2.
I've installed the DHCP Server role on Server two (2012R2) and authorized the Server. When I launch DHCP Manager, add the SBS2008 Server in the MMC, right click the scope and choose "Advanced > Split-Scope", and then run through the wizard,
I get as far as the "Percentage of Split" screen, and when I click next I get the error "Not enough storage is available to process this command".
I've searched online for this particular error message and I've come across articles suggesting AV exclusions are not in place for the DHCP database and files, however in this case the exclusions are definitely in place and I've also tried completely disabling
AV on both Servers and this made no difference to the outcome.
I also came across articles suggesting the "IRPStackSize" registry DWORD needed to be added and set to a decimal value of 15 or larger. Again, I've tried adding this and rebooted both Servers but I get the same result.
Anyway have any ideas?
Thanks,
Craig

Hi Eve,
No, there were no related events in the event logs. I've since tried splitting the DHCP scope manually but this did not work - the DHCP Server on the SBS would just stop and event: 1053 was displayed when trying to start the service again. I noticed
that as soon as I de-activated DHCP Server on the 2012 Server then the DHCP Server on the SBS would start again.
I then found the following in a TechNet article that would suggest I cannot have another DHCP Server on the network if using Small Business Server.
Notes
A DHCP server running Microsoft Small Business Server will not operate if another DHCP server is active on its network.
Detection of unauthorized DHCP servers requires the deployment of Active Directory Domain Services and the DHCP service. Other DHCP servers do not attempt to determine whether they are authorized by Active Directory Domain Services before offering IP address
leases.

Oracle db 11g r2 Configuration of processes and session

I recently installed Oracle DB 11g R2 and 50,000 users connect to this database suggest me what would be basic configurations .
Processes and sessions parameters for database are 5000 and 5505 but it is little lagging now so if its possible i want to make it maximum of processes and sessions or automatic .

50,000 users getting connected concurrently? How many users/sessions remain active at any given point of time?
For such high userbase/sessions better to go with share server configuration, since I cannot assume that even 10% of the users will be active at any given point of time so better to use shared servers and dispatchers.

SCOM integration With Orchestrator for Self healing the alert and redusing L2 Work

Hello ALl,
Using orchestrator is it possible to run chain of commands which are responsible for resolving a SCOM alerts. For example if machine is running out Space and my L2 administrator performing certain activity to bring up space. So is it possible that if scom
throw and alert that server D drive is running out of space and orchestrator will see that alert and run some chain of command like remove temp, run check disk, run defrag, remove some *.example files which will increase the space and it will resolve the alert
as well. So this is one example i am trying to write here but such conman alert which scom generate everyday is it possible that we can use orchestrator to resolve those condition or provide L1 support to control that condition so until my L2 engineer reach
that server to check that issue, the intensity level of that issue is reduced and he will get time to take more action.
Appreciate all of your response.
Thanks
Onkar Umarani.
Omkar umarani SCOM STUDENT

You most certainly can do that. If you install the SCOM integration pack for Orchestrator, it contains an activity called Monitor Alert. This activity will allow you to
monitor SCOM for a particular alert based on the requirements you specify in the activity, and trigger the runbook when the alert is created.
You may want to take a look at this article (http://www.systemcentercentral.com/4-orchestrator-runbooks-every-scom-administrator-should-know-about/)
for some ideas and tips on how to integrate Orchestrator and SCOM.
Matthew Dowst |
Blog | Twitter

PI 7.31 Java only stack (PI and Orchestration package) post installation

Hi,
Recently we installed PI 7.31 server, i searched in sdn but i couldn't get any post installation steps.
Could you please provide PI 7.31 Java only stack (PI and Orchestration package) post installation steps.
Thanks,
Venkata Ramesh

HI Venkata Ramesh,
Ref: UPGRADE TO SAP NETWEAVER PROCESS INTEGRATION 7.3
http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/505374f4-9cbe-2e10-a6b9-c74a22924d26
Regards,

Configuration Wizard-NW:BI-AS ABAP(Connectivity of BI and Source System): M

Hi friends,
I´m configuring the (NW: BI - AS ABAP (Connectivity of BI and Source System): Maintain) in NWA using Configuration Wizard.
But there is the error in step (NW: BI - AS ABAP (Connectivity of BI and Source System): Maintain > Scenario UI: NW_BI_ABAP_DEFAULT > Scenario Process: Abap Server Integration to BI > Configuration Process > Configuration Unit: Initialize > Config Unit BI System: Initialize > Customizing: Assign Logical System to Client > Write Customizing data to Table T000)
Below error log:
*Write Customizing data to Table T000*
Description:
Exception in step "WriteProfile_1223390220410"
Exception details : com.sap.tc.lm.ctc.metamodel.exception.ActionExecuteException: Exception during the import of the profile!
State
Step finished with error
Support Information
Type of Action
WriteProfile
Debug Events
WriteProfile:Write Customizing data to Table T000
Library: sap.com/tclmconfig~bs
SourcePath ./com_sap_nw_bi_abap_default_maintain/ext_12064772269223/ext_1206447991146/Process_1207123636083/proc_1196064316796/Process_1204300420808/proc_1204300371034/WriteProfile_1223390220410
Time 2011/11/03 at 15:36:57
Schema content/NetWeaver/Common/Customizing/Clients/T000.xsd
Type : View Maintenance
Input
<TABLE_T000 xmlns:expr="http:/sap.com/ctc/expressions"><T000><MANDT>100</MANDT><LOGSYS>SOLCLNT100</LOGSYS></T000></TABLE_T000>
Schema
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:vma="http://www.sap.com/ctc/vma"
elementFormDefault="qualified"> <xsd:element name="TABLE_T000" type="TABLE_T000"></xsd:element> <xsd:complexType name="TABLE_T000"> <xsd:sequence> <xsd:element name="T000" type="T000"> <xsd:annotation> <xsd:appinfo
source="http://www.sap.com/ctc"> <vma:vmacontext table="T000" isupdate="false"/> </xsd:appinfo> </xsd:annotation> </xsd:element> </xsd:sequence> </xsd:complexType> <xsd:complexType name="T000"> <xsd:sequence> <xsd:element name="MANDT" type="xsd:string"> <xsd:annotation> <xsd:appinfo source="http://www.sap.com/ctc"> <vma:vmaproperty column="MANDT"/> </xsd:appinfo>
</xsd:annotation> </xsd:element> <xsd:element name="LOGSYS" type="xsd:string"> <xsd:annotation> <xsd:appinfo source="http://www.sap.com/ctc"> <vma:vmaproperty column="LOGSYS"></vma:vmaproperty> </xsd:appinfo> </xsd:annotation> </xsd:element
</xsd:sequence> </xsd:complexType> </xsd:schema>
Destination parameters
user : SOLMAN_ADMIN
password : % secure content %
host : cdsolman
sysnr : 01
client : 100
language : en
Stack Trace
Caused by: com.sap.tc.lm.ctc.cul.api.CULServiceException: Exception during the import of the profile!
     at com.sap.tc.lm.ctc.cul.serviceimpl.writeProfile.CULServiceWriteProfileImpl.writeProfile(CULServiceWriteProfileImpl.java:98)
     at com.sap.tc.lm.ctc.cul.serviceimpl.process.WriteProfileControllerImpl.execute(WriteProfileControllerImpl.java:160)
     ... 16 more
Caused by: com.sap.tc.lm.ctc.cul.cpi.context.ConfigurationBrokerException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='xml_parsing_exception', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key xml_parsing_exception
     at com.sap.tc.lm.ctc.cul.broker.BrokerWriteProfileImpl.writeProfile(BrokerWriteProfileImpl.java:79)
     at com.sap.tc.lm.ctc.cul.serviceimpl.writeProfile.CULServiceWriteProfileImpl.writeProfile(CULServiceWriteProfileImpl.java:95)
     ... 17 more
Caused by: com.sap.tc.lm.ctc.provider.vmaprovider.exceptions.VMAProviderBaseException: Incorrect XML
     at com.sap.tc.lm.ctc.provider.vmaprovider.util.VMAUtil.getDocument(VMAUtil.java:349)
     at com.sap.tc.lm.ctc.provider.vmaprovider.util.VMAUtil.setXmlValue(VMAUtil.java:250)
     at com.sap.tc.lm.ctc.provider.vmaprovider.util.JCOProfileExecutorImpl.executeContext(JCOProfileExecutorImpl.java:310)
     at com.sap.tc.lm.ctc.provider.vmaprovider.util.JCOProfileExecutorImpl.executeChildNode(JCOProfileExecutorImpl.java:183)
     at com.sap.tc.lm.ctc.provider.vmaprovider.util.JCOProfileExecutorImpl.executeProfile(JCOProfileExecutorImpl.java:129)
     at com.sap.tc.lm.ctc.provider.vmaprovider.VMAWriteProfile.writeProfile(VMAWriteProfile.java:59)
     at com.sap.tc.lm.ctc.cul.broker.BrokerWriteProfileImpl.writeProfile(BrokerWriteProfileImpl.java:144)
     at com.sap.tc.lm.ctc.cul.broker.BrokerWriteProfileImpl.writeProfile(BrokerWriteProfileImpl.java:73)
Caused by: com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Incorrect encoded sequence detected at character (hex) 0x6f, (bin) 1101111. Check whether the input parsed contains correctly encoded characters. Encoding used is: 'utf-8'(:main:, row:1, col:637)(:main:, row=1, col=637) -> com.sap.engine.lib.xml.parser.ParserException: Incorrect encoded sequence detected at character (hex) 0x6f, (bin) 1101111. Check whether the input parsed contains correctly encoded characters. Encoding used is: 'utf-8'(:main:, row:1, col:637)
     at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:139)
     at com.sap.engine.lib.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:127)
     at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:76)
     at com.sap.tc.lm.ctc.provider.vmaprovider.util.VMAUtil.getDocument(VMAUtil.java:341)
Caused by: com.sap.engine.lib.xml.parser.ParserException: Incorrect encoded sequence detected at character (hex) 0x6f, (bin) 1101111. Check whether the input parsed contains correctly encoded characters. Encoding used is: 'utf-8'(:main:, row:1, col:637)
     at com.sap.engine.lib.xml.parser.readers.EncodedDataReader.read(EncodedDataReader.java:209)
     at com.sap.engine.lib.xml.parser.readers.EncodedDataReader.read(EncodedDataReader.java:207)
     at com.sap.engine.lib.xml.parser.helpers.AdvancedXMLStreamReader.read(AdvancedXMLStreamReader.java:143)
All the others steps were finished successfully
Only this step is with error. I don´t know that to do.
Regards,
Ricardo Arriado
Edited by: Ricardo Arriado on Nov 4, 2011 6:24 PM

Hi,
Please double check the JCO user and the authorization.
Or
Apply these two notes, it should resolve ur issue
1493124 CTC: Check table existence before table whitelist
1471762 CTC: Automated Configuration:
Hope this helps u.
Best Regards
Vijay K

SCCM & BMC Remedy integration thru Orchestrator

Hi, I see same question has been asked in the past with older versions of SCCM, BMC and Opalis...but would like to know if there are any specific benefits or advancements or even higher feasibility of implementing below, using Orchestrator
1) Data load: Load HW/SW Inventory from SCCM into BMC Remedy System. Is it even possible to load Asset Intelligence data so that both systems can correlate common data
2) Create a flow which connects both BMC remedy & SCCM using
Orchestrator
a) End user to raise a request in BMC remedy system
b) Shoots an email to Assset Mgmt & Mgr etc for approvals
c) Record their approvals back (thru email or over webisite/url)
d) If approved to create an instruction (deployment) in SCCM for that system
e) Retrieve the status codes received by SCCM, if successful then short mails to user & service desk
f) Modify BMC Remedy Asset Mgmt for that software to reduce availability by one count
g) Close the ticket or any other simpler connectors available out there ?
Vasu

Hi,
with the Orchestrator and the IPs you cann create such a flow
http://www.sc-orchestrator.eu/index.php/integration-packs/integration-packs-von-kelverion/ip-atrium
http://www.sc-orchestrator.eu/index.php/integration-packs/integration-packs-von-kelverion/ip-remedy
http://www.sc-orchestrator.eu/index.php/integration-packs/integration-packs-von-microsoft/integration-pack-fuer-system-center-configuration-manager
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

Sap fi-sd integration and configuration part

Hi guru,
Please tell me fi-sd integration and configuration part.
every one knows the t.code - vkoa, apart from this, is there any other related configurations..?
Please tell me any other configurations part.
With regards,
Manas

Hi,
It generally depends on your integration scenario
..so surprisingly variety of scenario exists in the world
Please check CR configuration guide in 'SAP Service Marketplace'.
(Latest version is for SAP Enhancement Package 6, ECC 6.0)
System Connections- page 13
Process Integration with SAP Systems- page 57
Best regards,
TED

No data in Business Process Analytics after setting up BPA and BPMon

Hi,
I have followed the BPA set up guide and done all the configuration for BPA. I have set up BPMon for a solution and in the logical component node i have done configuration for many application monitors.
Also in the "Load Master Data" node the master data is loaded. But still in BPA when I am selecting the time frame and applying it I am getting a message that no data is applicable in the selected time frame.
How can i get the data in BPA.

Hi Vishal,
1435043 - E2E Workload Analysis - No applicable data found
specially section 3) EFWK Resource Manager Job, wehre you find several
hints to check this job and the EFWK Adminsitration.
Also check note: 894279 Background processing in SAP Solution Manager
Please have a look at following chapter of the the BPA Setup
guide to fully understand the data flow in this application:
2 Architecture of Business Process Analytics
> 2.1 Data Retrieval and Reporting
Please also review following chapter, in to see if there are any errors
extracting the data from the managed systems to SAP Solution Manager:
3.2.3 Checking status of Solution Manager Diagnostics Extractor
Framework (EFWK)
Also check:
1570282, 1643303 and 1602437
thanks
Regards,
Vikram

Process Orchestration - Configuration Wizard "Process Integration and Orchestration Package" shows running

Similar Messages

Maybe you are looking for