Process order %00000000001 has been selected for deletion
Hi Guys,
With the use of strategy type 86 (assem bly processing for process order) when creating the sales order it is giving the error
Process order %00000000001 has been selected for deletion
Message no. V1796
According to process order will be created automatically with the order type PI04. Related setting for the order type Pi04 in the specified plant is done.
Pls help.
Solved..Change the customer number
Similar Messages
-
Error 1075: The dependency service does not exist or has been marked for deletion
Windows 7 Pro laptop will not connect to corporate domain. Multiple identical twin laptops have no problem.
Best suggestion so far has been to leave the domain and rejoin it, BUT the relevant buttons are grayed out and the comment says "Note: The identification of the computer cannot be changed because:- The Workstation service is not running. Open the Services
snap-in (services.msc) to ensure it is running and set its Startup Type as "Automatic"."
In services.msc the Workstation service is already set to Automatic but is not started. When I try to start it manually the response is "Windows could not start the Workstation service on Local Computer." and then "Error 1075: The dependency service does
not exist or has been marked for deletion."
Rebooting gets me nowhere.
In all other respects that laptop appears fine and can connect to the Internet, but NOT to the network. I have brought it and a twin laptop home to try on my domestic network and get the same results.
Any ideas, please?Hi,
Let us go to services.msc and navigate to Network Store Interface Service. Please check whether this service has been set to Automatic and turned on.
Kim Zhou
TechNet Community Support -
Hello,
I have a 5 server farm (DC, 2 WFEs, 1 SQL,1 CA w/ search) and am experiencing an issue when returning search results. This issue just started occurring recently, and basically the search page throws a correlation id whenever used. The error returned
is:
SearchServiceApplication::Execute--Exception: System.Runtime.InteropServices.COMException (0x800703FA): Illegal operation attempted on a registry key that has been marked for deletion. (Exception from HRESULT: 0x800703FA)
SearchServiceApplicationProxy::Execute--Error occured: System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: Illegal operation attempted on a registry key that has been marked for deletion. (Exception from HRESULT: 0x800703FA) (Fault Detail
is equal to An ExceptionDetail, likely created by IncludeExceptionDetailInFaults=true, whose value is: System.Runtime.InteropServices.COMException: Illegal operation attempted on a registry key that has been marked for deletion. (Exception from HRESULT: 0x800703FA)
I even attempted to create an out of the box enterprise search site with OOB masterpages and I still am receiving this error.
I have also tried the ‘Do not forcefully unload the registry at user logoff’ registry edit, but it did not work.
Has anyone ran into this issue and has another solution other than the ‘Do not forcefully unload the registry at user logoff’ registry edit?
Thanks!IISReset works for me (but after some time it fails again)
Check this posts: http://pacsharepoint.com/2011/11/sharepoint-search-illegal-operation.html
http://blogs.msdn.com/b/distributedservices/archive/2009/11/06/a-com-server-application-may-stop-working-on-windows-server-2008.aspx
hope it helps, -
No output has been selected for printing in Proforma Invoice
Hi,
I have created PO for STO and delivery (Delivery Type NL) through billing VF01, billing type (JEX) and creation of excise invoice, T-code u2013 J1IIN with reference to Proforma Invoice, it is working fine.
I have maintained the billing output (JEX) in condition records (T-Code- VV31). When I have save the proforma invoice and selected the issues output system showing Error u201CNo output has been selected for printingu201D Message no. VF302"
Can any body tell me what is problem for configuration steps or I have missing any steps?
Useful answers duly rewarded
Regards,
DevendraHi Devendra
check the following things :
Go to VF02 ->header data ->output-> click on analysis
Check the access sequence (key combination) in your output type details.t.code V/40.
check wheather the output procedure has been assigned to the output type or not
check the condition record has been maintained or not VV31 . If maintained check the key combinations entered, transmission medium also .
Regards
Srinath -
No Output has been selected for priniting
Hi,
While tryig to issue output (RD00) to Printer/Screen, we getting the error No Output has been selected for priniting.
Please advise where to maintain this?
Regards,
Edited by: STUDENT on Oct 2, 2008 7:20 PMHi friend
As it is billing then it is RD00. as per your query , once you create billing go to header data-> output and give manually output RD00 and then give the communication method as LP01.and once you save the billing document.go to menu-> output -> issue output to screen .
Regards
Srinath -
Has anyone ever managed to solve this one?
We have a problem on Windows 7 SP1 32bit systems.
when we try to start the Check Point VPN-1 Securemote service we get this message:
Error 1075: The dependency service does not exist or has been marked for deletion
When we install a clean Windows 7 from an ISO the checkpoint client without any issues
when we use the same Windows Setup source and install it from SCCM TS - the CheckPoint client doesn't start
the client we're installing is : CP_SeucRemoteSecureClient_NGX_R30_HFA3
which is supported for Win7 x86
other than that there are no special prerequisites for the CheckPoint client. therefore we know the problem is local :/
we tried to isolate and minimize the cause of the issues by trying to see the differences between a clean installation from ISO and a clean installation from SCCM
We know for sure the problem is not from SCCM Client, Programs and Features, Updates, Group Policy
it seems like the configuration is the same but we can't seem to find any online solution about this issue
any suggestions?
thanks
Tamir Levy
Tamir LevyHi,
Please check if all the dependencies services are running, if not, please start them:
DNS Server
Remote Procedure Call (RPC)
Netlogon
Server
Workstation
Any error message, please post back.
You can also check solution in this article:
http://support.microsoft.com/kb/269375
Hope these could be helpful.
Kate Li
TechNet Community Support -
No output has been selected for Printing
I have copied standard output determination procedure for invoice,maintained output condition record & access sequence -billing document type.
I got above message in VF02/ VF03 while selecting "Issue output to'.
My requirement is to get output selection window.(automatic output).
Thanks,
VrajeshHello Vrajesh G. Nayak
1. Go to VF02, Header-output- there see if your output type comes or not.
i. if it comes, select it manually- go to communication select printer- then you can see the yellow light indicator at output screen. Then check the print preview, if ok print.
ii. If the output types doenst comes as per 1 then go to SPRO and check the output control and VV31 maintenance.
2. If it is required to set the automatic printout select the option "Print at creation/saving the document" in communcation tab while maintaining VV31.
Hope this helps.
Regards
raghu -
After Lion upgrade, my email has been upgrading for 4+ hours
Is this normal?
I installed the Lion upgrade on my mid-2009 MBP. It went without any complaints. I have 8G of RAM and 200G free on the HD.
When I restarted after the install, logged in and started mail.app it said it had to 'Optimize' it and it started this process.
It has been running for > 4 hours so far. The window shows no indication of any progress being made and says it will take a few minutes.
The timestamp on my Envelope Index in ~/Library/Mail matches the start of that process, but nothing else in there shows any change.
Looking in the console I see the startup messages for the process, but no errors.
10/13/11 7:59:08.506 AM com.apple.launchd.peruser.501: ([0x0-0x124124].com.apple.mail[33082]) Exited with code: 255
10/13/11 7:59:11.786 AM Mail: Using V1 Layout
10/13/11 7:59:13.653 AM Mail: Upgrading Library from 4.93 to 4.93
I can see that process is consuming CPU time and I did an lsof on the mail process and it shows that as the only open file under ~/Library/Mail that it has open.
mystic:~ jrh$ ps ax|grep Mail|grep -v grep
33118 ?? S 2:45.72 /Applications/Mail.app/Contents/MacOS/Mail -psn_0_1200421
mystic:~ jrh$ lsof -p 33118|grep /Library/Mail
Mail 33118 jrh 7u REG 14,2 91271168 370870 /Users/jrh/Library/Mail/Envelope Index
Sizewise ~/Library/Mail is 16G in size.
How long should this process take? I'm closing in on 5 hours with mail shut down.
thanks
johnI had the same experience and after 20 minutes I did it the crazy way. I disconnected it from USB iTunes and after 2 or 3 reconnections it happened the restore was ended and it was all OK.
Be carefull: this is something to recomended by Apple but... what can you do. ??? -
Your order has been sent for processing...
...and the button to cancel my pre-order has now went away. Hopefully this is a good sign that my 6 Plus is moving through the process and I'll still get it on launch day. Fingers crossed!
I ordered the Plus, 64GB, in Silver. And I was getting the same "expected delivery date not available" until about a little over and hour ago. Check it once more and noticed that the status had changed to "your order has been sent for processing". I was a bit shocked to see the change too since everyone else was having the "not available message". I'll keep checking and will post if the status changes again.
-
AFS ARun: sales order not been selected for the allocation run.
Hi,
I am setting up the Purchase-to-Order (similar to Indiv PO item sales order) Process for SAP AFS.
When doing the Allocation Run (trx J3AT) after Goods receipt of Sales order stock, I get an error that ARun terminated because no requirements were selected. The delivery check report (/AFS/LIEF_CHECK) indicates that the sales order has not been selected for the allocation run.
For this process, I have set-up an Allocation type with
1. Requirement selection that does not exclude MTO/PTO orders
2. Set-up stock selection which includes physical stock type for MTO/PTO orders to the customer special stock MSKA with the segment KALAB.
Can someone suggest what I may have missed?
Regards,
PDHi Pankaj, I have same exact issue. How did you fix this ?
Thanks,
Mahesh -
No maintenance plan has been confirmed for Order 000004024181; Follow-up ca
Hi
I try to close a list of preventive order (initiated by maintenance plan) from the transaction IW38 but the system displays the following error message
"No maintenance plan has been confirmed for Order 000004024181; Follow-up call exists
Message no. IW597"
thank you for your helpHi,
You mean close -
>TECO???
If yes Go in IW38 select all orders ,click Enviroment Tab and you can do the TECO but that order should not have Open reservation.
Regards,
Rakesh
Edited by: RAKESH ASHOK MANE on Aug 26, 2010 1:02 PM -
I have Lookout 6.5 running with Windows 7, the process has been running for about 2 months with no problems, but today the Citadel stopped working!
How could this have happened and what can I do to get it running again?Didnt realize there was a response, late getting back to you.
Save your process files outside of the NI progam directory (you should have external backups already right ). THey should not be deleted.
Any customizations to the lookout.ini and lookout.sec file may be lost.
Mike
Forshock - Consult.Develop.Solve. -
Hard Drive Recovery Process has been selected
One day, while playing a game online, the computer screen went black and a blue box appeared that said "Hard Drive Recovery Process has been selected Press Yes if you wish to continue " Also, there was NO which only shut the computer down. YES took me to a blue screen with recovery and troubleshooting options. At first, none of these worked, or stayed. Because the next time I used my computer I would get the same Hard Drive Recovery Process message and had to try various things to make it work. I did purchase a Windows 8.1 recovery flashdrive from Toshiba and attempted to install it. It took about 6 tries for it to completely install. However, after installing, I was unable to use the RESTART option to power off the computer as it would trigger the Hard Drive Recovery Process again ! Ugh ! Last night, I powered the laptop off using SHUT DOWN and in the morning, I got the Hard Drive Recovery Process screen again, much to my horror. I have Norton Internet Security and Anti Virus as well as I used Toshiba maintenance tasks and no problems were found. I would appreciate any information on troubleshooting and repairing this problem, if there is a solution. Thanks !!!!!
I did purchase a Windows 8.1 recovery flashdrive from Toshiba ... after installing .. it would trigger the Hard Drive Recovery Process again
The fact that the problem remains after restoring the hard disk to its original out-of-the-box contents using Toshiba recovery media means the software doesn't cause it.
The computer needs servicing. -
My iPad has been syncing for 18 hours / back up process since I tried to work with the iCloud. Some items ie., contacts are synced to my new iPhone 4si and also books from the app store and also kindle stuff is okay. No photos yet. iPad has 5 gb of photos on it. What happens if I stop the back up/sync process before it completes? Does it mess up my iPad??? Thanks
Delete your old Firefox Profile and create new one
*http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
Backup and Restore your profile data's
*https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
*http://kb.mozillazine.org/Profile_backup -
How to reuse the process chain which has been deleted?
hi
guys
how to reuse the process chain which has been deleted?
your regards
sureshif you want to "recover" the deleted process chain, try to check DEV / QAS / PRD. Maybe there is a copy still available
Or check the following tables in SE11: RSPCCHAIN / RSPCCHAINATTR
Good luck !
Maybe you are looking for
-
Hy, My name is Alexandre and I develop Java games.I am with the following problem:I have some old games here in the company that need to be ported to the brew solution, but they don�t have the source-code anymore(just the jars files), is there any to
-
I have just bought a iBook G4 & have upgraded it to Leopard with after the software update is now running 10.5.4 I have noticed that the volume control in the menu bar is missing & using the F3 to F5 keys to control the volume brings up the on screen
-
Copa Report selection screen in display mode
Dear Friends: In COPA Report, we have sales group,Fiscal year and Currency type in our selection screen,sales group should be in display mode i.e. the user must not be able to change the sales group. How to reslove the problem.Please advise. Thanks&R
-
Hi all, I am running into some wired errors ... I can easily do a select statement, e.g., select * from schema.table ... But when I do a cursor in a stored procedure, e.g., CURSOR cursor_x IS select * from schema.table; I will hit error ORA-01031: in
-
hi i am new at flash and have been following training i purchased from total training and have been building my website in flash using the action script 2 setting with some degree of success. i have now however hit a brick wall. i am trying to make s