Process order batch number not reflecting in corresponding inspection lot

Hi QM gurus,
I am working on inprocess inspection for production. I am creating process order during that time batch no is generated automatically by the system. Now process order is released during this time Inspection lot generated with inspection type 03. Now the problem is in the inspection lot, process order batch number is not reflecting. I have checked all the master data seetings. All seems to be fine. what could be the problem. any settings missed can anybody help me out.
Thanks
Vinameath

Hi Vinameath,
Go to the Master Recipe (C202) of this Process order/Material. Go to Recipe Header tab and click on the Quality Management Header button.
Now,go to the Partial Lot Assign field and maintain the value " 0 Partial Lots not supported " and save.
Then create a new process order and in all probabilities, the batch should appear on the in-process inspection lot.
Hope this helps you!
Regards,
Vinodh

Similar Messages

  • Process Order Batch number generation at the time of order creation

    Dear All,
    I m facing some issue at the time process order creation:
    Current Settings:
    1. Batch Number Creation at the time of order create.
    Reason for this setting: Release of order is done  by releasing operations one by one, therfore batch number will be generated on the final operation release, thats why we set up batch creation at the time of order create.
    2. For FG batch number generation there is a program that copy the SFG(in Order BOM) Batch number to FG. ITs a industry requirement.
    Problem:
    when we create FG order system generate the error message at the time of order creation tht No batch could be determine.
    Please suggest the solution
    Thanks,

    Hi
    Hope you have cretaed Batch serch strategy in COB1
    U need to maintain it as per your strategy type.

  • BADI/EXIT - COR1 (block release process order without number batch)

    Hi Gurus,
    There are a BADI ou User EXIT in the transaction COR1 to block the release Process Order without number of batch created??
    In COR2 OK, but COR1 I don´t find. I tried all the possibilities that knew!!!
    Thank´s
    Cleber

    Hi,
    The below user exits are avilable for COR1.
    EXIT_SAPLCOKO_001
    EXIT_SAPLCOKO_002
    EXIT_SAPLCOKO_003
    EXIT_SAPLCOKO_004
    EXIT_SAPLCOKO_005
    EXIT_SAPLCOKO_006
    Check if you can use any of the above.
    Regards,
    Soumya.

  • Report: Internal order+Batch number

    Hi All,
    Is there any report which can show the internal order & Batch number together?
    Quick response will be appreciated.
    Thanks & Regards

    Hi Sridhar,
    I apologise for mis-stating the issue.
    I would like to know if there is any reports with Internal Order numbers that allow me to add the Batch number field?
    e.g KOB1 is an internal order report. But, I am not able to add Batch number field to it.
    I need a internal order report to which I can add the Batch Number field.
    Thanks & regards.

  • Process order settlement Ko88 not working.

    Hello Sapients,
    i am getting a message:"There are no accrued amounts; settlement is not possible."
    Following are the steps i cariried.
    1.) created a Process order CR01
    2.) did goods issue to the process order using MIGO_GI
    3.) when i run KKAX I am able to the costs in WIP.
    4.) but when i execute the ko88 for the particular process order systme is not settling any but instead giving me a message: "There are no accrued amounts; settlement is not possible."
    5.) Could you please advise if I am missing any thing.
    Thanks and Regards
    Ravi

    Hi Ravi,
    Please, check if you have run the settlement already for period that you wants to do the settle by path  KO88 -> goto -> previous settlement or by  extras -> activate flow trace at Ko88 to analysis the problem.
    Please, also verify the SAP note 179533. This note has some informations regarding the problem.
    Regards,
    Paulo

  • Process Order -Batch determination for a BOM material(same batch)

    Hi Friends,
    Thanks in advance.
    Let us say, a material (ROH) has so many batches as A,B,C & D. Whenever we create a new process order, system has to pick only the particular batch( say -C here)  in the process order BOM through batch determination.  (during process order creation stage)
    1.How to achieve the same ?
    2. What are the ways are there to achieve the same ?
    3.Is there any Exit for this?
    Regards,
    Mani

    Hi Velmurugan & Vishwas,
    Thnaks for your feed back.
    1. Is there any other ways without batch classification ? ( Because there are so many material without MM-classification view.....and client wants without extending the Classification view for MM master as it suggests same batch for all GI for delivery & GR for purchase.....)...We want only for process order batch determination.....
    2. Is there any exit for this ?
    3. Is it possible through any kind of Characteristic assignment in the Sort sequence? How?
    Regards,
    Mani

  • Vendor listed in the batch does not reflect actual supplier.

    Hi,
    Vendor listed in the batch does not reflect actual supplier.
    For some (STO's) it reflects the actual supplier & for some it is replaced by receving vendor.
    Regards,
    Sudakar

    Great, that worked, thanks.
    Now I have a small problem. I'm dispatching a MOVE event
    manually at one point to force a listener to trigger, and it seems
    that afterBounds is null. Here's how I'm dispatching the event:
    nativeWindow.dispatchEvent(new
    NativeWindowBoundsEvent('move'));
    While the MOVE listener function is successfully called,
    event.afterBounds.x throws a null reference exception.
    Is there an easy workaround?

  • GR of Process order - Document does not contain selectable items

    Hi Guru's,
       While doing GR for process order, user is not able to do the GR because of the below message:
    Document XXXXXX does not contain selectable items
    The other user is able to do the GR. The status of process order is
    REL PCNF PRC EXPL EXTS GMPS MANC PDLV. There is overdelivery tolerance so, the delivered quantity is more than ordered qty.
    There is no auto GR setting, no COGI errors, no final delivery indicator, no authorisation issue.
    What could be the reason for this ?
    Thanks in advance.
    Regards
    Kalyan

    Hi Dee Joy,
      I am using MIGO for posting the GR. So, kinldy let me know what setting in MIGO needs to be done.
    Regards
    Kalyan

  • Change process order range number

    I was requested to change the current process order range number.
    Could you give some information about this?
    Pros/Cons?
    Thanks,
    Gerardo

    The Process order number range is maintained in tcode : CO82.
    Typically you change number range for various reasons like
    1. External number range required
    2. New order type created & new number range required for Rework orders
    3. Tracking certain special orders with different no range for differenciation & easy visibilty
    4. Specail no range reqd due to limitation of External System that is interfaced with SAP
    5. Different no range required for collective orders, MTO, M to stock orders etc...
    These are some of the reasons I can recollect from my experience.
    This you may take as the PROS.
    As far as CONS : 
    1. Good communication with user group needed before number range change
    2. As with any configuration change, Regression testing needed by users/ business groups before configs move to Production
    this is my 2 cents...
    hope this helps. More questions? please come back
    thanks,
    Ram

  • Batch not created for the Inspection lot?

    Hi Experts,
    I have created a  the production order by inputting the Batch in the GR tab and released the production order. The release of Production order will create a Type 03 lot , but surprisingly it doesn't show the Batch in the Batch field when i look the inspection lot that was created by release of production order, instead it shows blank. I have checked the material master and it is batch managed material. Please let me know where I'm going wrong.
    Configuration- Batch is unique at material level indicator checked
    my plant has Batch status management indicator
    Please find the screenshot below for type 03 lot and also the Batch management indicator in material master in sales/general view, work scheduling and warehouse1.
    Thanks,
    Pavan

    Hi Pavan,
    According to SAP Note 50618, you may consider to implement the correction on that note or use partial lot assignment.
    For partial lot assignment, you can find the setting in Routing header and customizing in SPRO with path: Quality Management - Quality Planning - Inspection Planning - General - Define Identifier for Inspection Points.
    There's also another discussion regarding this issue. Please find here.
    Regards,
    Julian

  • Internal Batch Generation for Process Order while release not happening

    Hi all
    While releasing Iam having the problem that the system is not generating automatically the batch for the components, I have mantained CORY for production scheduling profile Batch management section for Automatic batch creation in order with value "2". and assigned this to the material (The material to be produced) work scheduling MM View. Also I have activated OMCZ, is there any config I'm missing to the components?
    While releasing I get this error "You must enter the batch for material XXX" and XXX is the component in the BOM.
    Please advise.
    Regards

    Julio:
    if you dont want to create the product batch , so in the scheduling proflie select "NO automatic Batch creation....", or just dont use the profile in the product material master (Transactions CORY and MM02) . If the batch mgmt is active for this product, then SAP ask you for a batch number at goods receipt.
    For the component, in the view MRP 2 (MM02) in the field "batch entry" select "3" - Automatic batch determination. You shoud have previously defined some Batch determination rule and so on. Or you can initially select "2", to make a manual selection. This must be used only in those component whose batch number must be determined in advance.
    Hope this helps
    Saludos

  • Batch Number Not copied over from Production order to Confirmation

    Dear Experts,
    In the production order, I specify the batch # for the components.  But when I do the confirmation, the batch number for the components is not getting copied over. 
    Can anyone suggest what has to be done.
    Regards
    Tom

    Dario, I have not saved my confirmation.  But when I execute CO11N and go to "Goods Movement" tab, I expect the Batch to be copied from the production order for the components.  But the batch field is Blank.
    How do we make the batch field to be copied over from the production order.
    Thanks in advance.
    Regards
    Tom

  • Process order( batch key configuration)

    I need to create the process order by copying from already created order of order type Zi10 .It gives a message " BATCH SPLIT DEVIATION"
    This functionn is happening perfectly for other order types like  Pi01 and Zi06 .
    I also noted that in item overview of order, Batch Key is populating as X for Pi01 and Zi06 order types and no message appears ,but for order type ZI10  Batch Key value appearing is 1 or 2  and we are getting message "BATCH SPLIT DEVIATION"
    I m not able to figure out where the config change for batch key is to be done.

    Hi Sachin,
    I have tested it and it seems to be no relation with Order type.
    Problem is during Creation of new Order Batch Determination which was already done in earlier Order is also gets copy in new order.
    But due to Non avaibility of Stock in same Batch system will throw this massage.
    For example
    I Had Already created Order
    Order No. 1100000510 and order type is C002 and order qty is 23809.
    One of the component is 100000028 and Required qty is 9 kg.And for this component Batch Determination carried out
    And the Batch Determination is like this
    Batch No. is A0RM800046 and available stock of that Batch is 9.925.
    Now I am creating new Order by copying order no. 110000510 but order type is c001 and order qty is 119045.
    and during order creation System throws a massage same as you got,
    Batch split deviation 95.856-% for 100000028. Required =             0.375
    KG, allocated = 9.050
        Message no. CO583
    Diagnosis
        The total requirements quantities in the batch split records plus the
        unassigned requirements quantities in the batch totals record is larger
        or smaller than the original requirements quantity for component
        100000028. The requirement equals             0.375 KG, the total batch
        split quantity is 9.050.
    System Response
        The system will execute your change as requested.
    Procedure
        Check that you want this variance and that it is correct. For example,
    So the solution is correct the Batch Determination or do Read Master data once you create the order by copy.Massage will removed.
    Regards,
    Dhaval

  • Internal Batch number not getting generated

    Dear Experts,
    We want to generate internal batch numbers during production order creation. To achieve the same ,
    the following Customization settings were done:
    1. Acitvate Internal Batch number assignment (T-code OMCZ)
    2. Maintain Internal Batch number Assignment Range  (No exits will be used for batch number generation)
    3. Creation of New Batches  -->  Define Batch creation for prdn. order --> Automatic batch creation during order creation
    4. Creation of New Batches  --> Define Initial Creation of Data for Batch Master Transactions --> Automatic creation
        only allowed for a material type.
    All the relevant materials are markes as Batch Managed.
    But when we are creating a Production order system generates a error shown below.
    No batch numbers could be determined
    Please guide.
    Regards,
    Namratha

  • During GR against Process Order Storage loc. not appearing

    He Experts,
    I am trying to do goods receipt against process order for bulk material using MIGO.
    But under where tab in MIGO storage loc field is not appearing. For this material production storage location is maintained in MRP2 view & in material type customizing both quantity & value field is selected for a given plant.
    Can you please explain why this field is not appearing? Is there any other customizing behind this? During migo 101 movement type (GR for acct. assgt.) is appearing in moveent type field.
    Thanks in advance,
    Vijay.

    Hi,
    OK,You are trying to do GR for a materisl which is defined as Bulk Material (Can be done in BOM or Material master).
    You said , there is no stock appearing for this material in this Storage location.
    Check one thing,
    go to MMSC and find out whether the storage location is maintained for the material or not?
    if your Storage location is not appearing in the list, maintain it there.
    Create a new Process order/productrion order  and check
    Regards
    Ratan

Maybe you are looking for

  • Multiple threads access the same method.

    Hello, I have been trying for a long time to find out multiple threads access the shared data. I have written a sample code, there I my intention is that method has to be accessed onlny one thread at a time., mean one thread finished the job, then ne

  • Broken links when PDF'ing from Structured Framemaker 8.0 in Windows XP

    We have a large number of links in our documents that are created using structured Framemaker 8.0 in a Windows XP environment. The xrefs work fine in FM, but once they have been PDF'd all of the links are broken. Since these are large documents, it c

  • Master Detail Forms with 2 composite primary keys - Is there a workaround?

    Hello All, I have been searching for a workaround to the maximum 2 part primary key restriction on the multi-row updates, and master-detail forms, and am hoping that someone can help me. I am using HTMLDB v2.0.0.00.49 with IE 6 against a 9.2 DB. I su

  • How to write BDC in Function exit (user exit )

    Hi champs, I am trying to write one bdc code in a function exit but it is giving me the error: " Incorrect nesting: Before the statement "FORM", the structure introduced by "FUNCTION" must be concluded with "ENDFUNCTION". -      The code which i have

  • JCO RFC Provider problem

    Hi! We are having some problems in 2 PI 7.1 SP7 Development and Project systems. Both have the same problem... We cannot see JCO RFC Provider connections and we cannot create new JCO RFC connections. Our Project system is copy of development and JCO