Process order creation with out BOM

Hi
I have an requirement...
material A is finished good
i create process order for material A
but i dont use BOM... with out BOM can i create process order .
after creating process order cani isuue components against order ? is it possible please can any one help me in this issue
but one condition : i craet process order material A 10 KG
for this FG i used components materia A used 8 kg and material B used 2 kg
is it possibel pls..could any one gude me in this issue
Regards
Sesi

material A is finished good
i create process order for material A
but i dont use BOM... with out BOM can i create process order .
yes, You can create a orderwith out BOM
after creating process order cani isuue components against order ? is it possible please can any one help me in this issue
Yes, You can assign component manually in component overview screen or you can issue material directly for order with 261 movement, It will go to unplanned consumption
but one condition : i craet process order material A 10 KG*
for this FG i used components materia A used 8 kg and material B used 2 kg
In The component overview screen of process order assign the Material A with 8 kg ,
& material B as 2 KG
Regards,
Sundaresan
Edited by: Sundaresan . E. V on Oct 4, 2010 2:41 PM

Similar Messages

Sales Order Creation With out Exicse Duty

Dear All,
I want to create the sales order with out excise duty calculation. But for this customer is excise applicable for other material.
Thanks
Saravanan R

Dear Sarvanan,
Looking to your issue what I understood is -
1. Customer is exciseable.
2. There is a mix of exciseable and non-exciseable material.
3. In sales order you want to calculate or don't want to calculate the excise depending on the material.
If you are having TAXINN tax procedure then for excise conditions,
1. Update access sequence by adding an access having material code, customer code with plant as the key.
2. Please nesure that this access must be on the higher priority else this access may not get populated.
3. Maintain the condition record as per the new access.
If you are having TAXINJ procedure then for UTXJ condition,
1. Update access sequence by adding an access having material code, customer code with plant as the key.
2. Please nesure that this access must be on the higher priority else this access may not get populated.
3. If required, create a new tax code having only tax data in the tax code.
3. Maintain the condition record as per the new access.
I think it will resolve your issue.
Thanks & Regards
Piyush

Order creation with Sales BOM........

Hi there ,
If I maintain the MRP & work scheduling view in the material master & maintain BOM with usage as sales. Then can I create as process/production order of that material as there is no BOM with usage type production maintained in SAP........
Please enlighten me ........
Thanks
Kaushik

Kaushik,
A process/production order can be created without BOM also, so the answer is yes still you can create a production order.(You will get an additional status "NMAT" - No material).
If the usage is defined as Sales then that BOM will not get picked for Prodn/Proc order.
If the Item level details of the component is also defined "production relevant" with "Relavent to sales", then the BOM gets picked up. (This is defined in Status/Long txt tab page in component item level details).
Hope this helps...Reward your points if so,
Regards,
Prasobh

Production Order With out BOM

Hi Gurus,
I have a scenario where I want to produce a Material With out BOM but with a Routing. Here I when I am creating a production order it ask for Valid BOM, please let me know the setting os that it will not ask for BOM and no error message is given for not having BOM.
Regards
Shree

Dear Rajesha,
I tried Doing want u said. But still I am Getting the same Message of BOM Selection
No valid BOM exists
Material
Plant
Explosion date
Do you want to explode a BOM for
a different material?
Please can u elobrate me on the same, so that this message should not come.
Thanks & Regards,
Shree

Purchase order creation with reference to Contract

Dear All
Purchase order creation with reference to quantity contract the contract quantity is not copied in to po. any configuration copying rules required. please guide
Regards
Anand.

Hi Buddy
The correct business process is RV Preq created by a user from any department then buyer converts this Preq to a MK contract with some quantity keeping the duration as some months/year. Then as and when material mentioned in the contract is required during the validity period of the contract MRP creates Preq or buyer manually creates NB preqs , same are then converted to PO but these PO are released against MK contract. So qty in PO are different then mentioned in contract because contract is for a large qty keeping in mind the duration (for example one year).
Regrds
Yogesh

REGARDING PROCESS ORDER CREATION

Hi All,
While creating the process order for material, system showing the message that "Manual process order cannot be created for this product". But if we try with another user id, i could able to create the order for the same material.
Plz suggest the solution to get rid of this error.
Thanks
Arvind S

Hi,
The message "Manual process order cannot be created for this product" clearly indicates that the user is not authorized for Manual process order creation by COR1 transaction for this material and may be this material is planned through MRP or SOP etc. and in critical or certain situations manual process order creation is allowed to another user/user id for the same material ( type of materials/material code).
Some time organizations put such restrictions through enhancements. You can search the exact reason or logic of restriction by the help of ABAP consultant.
Regads,
Narresh

Exit for production order creation that update BOM explosion date

Hi Guros
does any one know a user exit for production order creation that update BOM explosion date = AUFLD.
or a UE that run before the BOM explosion.
thanks.

Dear,
I dont think user exist will work for you,
You need to find BAdi for it, cl_exithandler=>get_class_name_by_interface .
Or try with SE84,
Enter the package name and check the " Enhancements"
Regards,
R.Brahmankar

Problem in process order creation.

Dear Sir/ Madam
i am facing a problem while process order creation.
the problem is:
Error when calculating cost for order ATFEDEC11 "see log Log is deleted when saving
Do you still want to save?"

Hi,
The log for production order preliminiary costing is not saved. Therefore, once the order is saved, there is no log available anymore (this is by the way a question of PP; none of the logs is saved).
Hope that helps...
Regards,
Declan

Create ecatt script for one sales order creation with multiple line items

Hi ,
I want to create a ecatt script for one sales order creation with multiple line items. Preferably SAP GUI.
This selection of data will be from an external file/ variants which will have only one row of data in it.
Firstly: I have to sort the external file having same PO Numbers in an order.Group them together.
Second: I have to create sales order for those many line items having same PO Number.
Best Regard
Taranum

Hi Micky
Firstl you should upload the Line items for a particular sales Order in an Internal table
and then pass that internal table to your BAPI during your coding corresponding to a particu;lar sales order
In case of any issues pls revert back
Reward points if helpful
Regards
Hitesh

External Number gneration for process order creation

Hi,
I need to generate external number range for process order creation and at the time of goods receipt.
How can I do this in the include ZXVBZU02.
Regards
SAi

You might want to try search first:
http://www.google.com/search?hl=en&source=hp&q=externalnumberrangeforprocessordersite%3Asap.com

TCODE for Process order creation against Sales order

Hi gurus,
Pls tell me what is the TCODE for Process order creation against Sales order
Eg. CO07 is for production order from sales orde

Typically, in MTO scenario after the sales order is created you run MRP which will create planned order and then you convert that into production order using MD04.
Or if you have SD settings correctly directly from the release of Sales Order it will create planned order or production order.
please check and revert back.

Automatic Reservation at the time of process order creation

Hi Experts,
As you are aware, when we create a process order and save, system automatically generates the reservation and the reservation will be for movement type 261. My requirement is like this. When system creates reservation, system should consider for which order type the process order is created and create a reservation for other movement type also.
For eg. Iam having order type ZRRW. When system creates reservation at the time of order creation, system should check the order type and reservation should be created for a movement type Z11 instead of 261 in the normal case.
Is there any user exit for the same. Please let me know.
Else how can I post the goods issue with a movement type other than 261. MIGO is not accepting other movement types.
Anticipating your reply
Regards
Prathib

Hi Ayethebing,
Thanks for the reply. we created the new movement types inorder to use the SAP standard reports and get the different types of goods movements based on the different processes.
We can do the goods issue using the custom movement type through MB1A. But I was trying to use in MIGO and this is where system wont allow this.
In MIGO, system will do the goods issue based on reservation only. The reservation is created at the time of order creation and it uses movement type 261 irrespective of the order type.
I was trying to find out whether any option is there to use custom movement type to create reservation so that system would propose this movement type in MIGO for goods issue against process order.
This is an interesting case but unfortunately dont have any option of user exit or Badi. Only one user exit related to reservation is to change the str loc and back flush indicator.
@Sabine: Thanks for your reply. But the BADI that you provided wont serve the purpose.
Thanks
Prathib

Availability check during process order creation

Hi all,
can anyone tell me significance of availability check during creation /change of process order?? ( in terms of business)
how is the usual processs?

Hi,
Availability check for a material is carried out only if the material is
1. A stock item
2. Not a phantom item
3. Not a bulk material.
This can be carried out
1. during order creation
2. during order release
3. when a created order is saved
Availability check can be triggered either manually or automatically.
For this we need to define in checking control(opjk)
First define a checking group(ovz2) and checking rule and this
must be assigned to checking scope.(opjj)
In the checking scope(opjj) we should define
1. which Mrp elements are to be considered during check
2. which inventory categories are to be taken into account
3. whether Replinishment lead time is to be taken into account or not
4. whether check is also to be carried at storage location level.
This checking rule must be linked to checking control(opjk)in which you can say
1.No availability check for the material
2.Availability check when saving the order
3.What type of check is to be carried
whether ATP CHECK or Check against PIR quantities
4. Whether order should be released or not if there is
any missing parts.
The checking group is assigned to material master MRP3 view.Please check whether checking gorup is assigned to all the components in the BOM.
Regards,
nandha

Sales order creation with respect to contracts

Hi Guys,
I am trying to create a saleorders with referece to contract for which in the background I configured so that during my sales order creation I see the pop-up box with all existing contracts for a specified sold-to party.
This process is so painful that order entry people have to manually select from the big list (pop up box consisting of huge list).
Is there any way so that I can automate this process insetead of selecting contracts from that list.
Regards
Krishna

Hi Ravi,
Thanks for your solution and could you please give me some more details what is the neame of the user exit.
and welcome for some more suggestions.
Thanks
Krishna
One way is to create the order with reference to the Contract and then the system will not give the pop up for the existing contracts.
The other way to automate the process is by using a userexit. Here the system should check all the existing valid contracts for this sold to party and should select the oldest or latest valid contract, as per the client choice.
Thanks,
Ravi

Regarding material wise purchase order creation with reference to pr

Dear sir
I have a scenario depending on the material wise pos creation
I have two type of material
1) raw material
2) consumables
When user will create purchase order for raw material, system should ask purchase requisition. ( i.e with out purchase requisition for raw material , system should not allow to create the purchase order)
Where as for all consumables materials system should allow to create the purchase order
Without purchase requisition also, for user.
Regards
Jrp.

You have to create two different document type for purchase order.
1) Raw Material Purchase
2) Consumables Purchase
You can create two different document type for purchase order with below mention path: -
SPRO >> Materials Management >> Purchasing >> Purchase Order >> Define Document Types.
After define two different document type, You can change field status for two different document type with below mention path.
SPRO >> Materials Management >> Purchasing >> Purchase Order >> Define Screen Layout at Document Level.
Select document type and change field status of purchase requisition.
Regards,
Mahesh Wagh

Process order creation with out BOM

Similar Messages

Maybe you are looking for