Process Order is not picking the follow-up material

Hi Gurus,
We have changed a BOM by discontinuing a component and giving a follow-up material with the valid from dates as 18/5/09. and then MRP is run on that nignt ( mrp job set to run daily in the back ground). and on 19/05/09 a Process Order is created from the planned orders genereated by the MRP run.
now, we found that the new componenet (follow-up) is not copied into the process order, but the old compomemt (discontinued) is removed.
MRP parameters are correctly defined (Planning mode is set to 2) . Please let me know if we are missing anything.
Thanks,
N

Hi
Pl ensure that the Following requirements have been met before you can use the discontinuation functionality:
1) Both materials must be planned using MRP.
2) The base unit of measure of the follow-up material must be the same as the base unit of measure of the discontinued material.
3) You must enter discontinuation data for the discontinued item and follow-up data for the follow-up item.
and Also refer the SAP link for Complete Details
http://help.sap.com/saphelp_45b/helpdata/en/b1/c044d1439a11d189410000e829fbbd/content.htm
Regards
Brahmaji

Similar Messages

Automatic Process order type not picking in CR01

Hi friedns,
i have created new Production scheduler-030 for plant - 0101 through - CORU and CORY t.codes and we are not assigning the
Prod. sched. profile in Materail master.
Now while creating the new process order through CR01,system is not picking automatically process order type for new production scheduler -030 and new prodction schedulre already assign in material master .
For old Production scheduler-010 process order type is picking automatically for same plant.
Are there any user exit need to update.
Please advise.
Thank you.
Regards.
asuvamsi

Thanks for you reply!!
PLease find the scrren shots.
MM02 screen.
COR1:
Thank you.
Regards
Vamsi

Process Order detail scheduling picking the std values from Phase.

I'm working on an Implementation scenario, where the Master Recipe contains only one Operation and one phase. After the Process order is created the basic start and End dates remain same. I did check the formula in the resource(on testing its working fine). I did check the control key, formula parameters, scheduling parameters of the process order. I have maintained the std values in the phase appropriately.
Still the process order basic start/end dates are same, even though the process order quantity is of any quantity.
Request all to please provide some inputs.
Thanks,
Nil.

Sorry, this is not the right forum for technical questions - please log a note in OSS or contact SAP services. Thanks

Varient Configuration prod order is not picking the super routing operation

Dear Experts,
In varient configuration,I have maintain Super routing and Super bom for KMET material.While creation of prod order or converting plan order to prod order,Routing is not getting selected.I have maintained dependency and have checked Production sheduling profile,order type and order dependent parameter,all is ok.Even the Super Bom is getting selected after MRP run as per my requirment.
What I am not getting is selection of routing for production order.Can any of the expert help to find the missing link.
Regards,
Rajesh Prasad.

Hi
For material Variant (FERT) production order Routing is not picking?Just check the Selection condition which is assigned to the operation is same as the selction of material variant i.e., Char & Char values has configured in MRP 3 View of Material variant.
Check this and revert back
Regards
Praveen

Jin1 Condition type not picking the CSt in the ordre or billing.

We are in ecc 5.0 version.
When we create a sales order . the order is not picking the cst /lst from the record.
I ckecked all the confifuration, Pricing procedure, tax determanation, partner determiantion and all relavant posibilities everything seems to ok from the point of configuration. when we create a condition record. it is not linking to pricing procedure or tax determiantion procedure. the system tells condition record for jin1 not exists. message no 8. when we cross checked from client dev it is picking the record and we cross checked the conf in quality and production server all are same no deviation.
but when detailed observation in dev server which is picking the cst shows Application" S" , statistical and accdet key. but in quality or prod it shows "V" and other mentioned keys.
What may be the problem.
thanks.
ramchandra

Hi Ranchandra,
Kindly check the Tax codes in all servers,that tax codes are exits are not qulality and production server.
Needful answer kindly reward points.
Thanks&Regards
Vikram.M

After attempting to process my movie, I get the following message. "The project could not be prepared for publishing because an error occurred. (OpWrErr: file already open with with write permission). Any ideas what I'm doing wrong?

After attempting to process my movie, I get the following message. "The project could not be prepared for publishing because an error occurred. (OpWrErr: file already open with with write permission). Any ideas what I'm doing wrong?

Hi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occours only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
Yours Bengt W

When I connect my iPhone 4S to my MacBook Pro, the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started". What does that mean?

Hello,
When I connect my iPhone 4S to my MacBook Pro (through the USB port), the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started".
What does that mean?
Thanks in advance for fixing my problem.

I think I remember hearing that if you quit iTunes with your device still connected, then open iTunes up again, it should work.
EDIT: Here, this might help: http://support.apple.com/kb/ts1567

Process order settlements not flowing into BI for Inventory

Hi,
I built a cube for inventory based on the standard extractors to generate MAC values. I have three MAC reports, each for daily, weekly and monthly. The reports give the right values at the at the month level , but whenever there is a settlement for process order done, BI does not pick the settlement value and this makes the MAC value shoot up at the daily and weekly level. I tried to a find an extractor for this settlement and could not find any. Can someone please help me with this ? Is there any datasource for settlement of process order?
Thanks

Hi,
Both Tomas and Debraj have provided good tips. Let me elaborate on this.
From SWU3, access Maintain Runtime Environment -> Schedule Background Job for Missed Deadlines by double clicking on it and execute it. You could maintain the interval until next deadline check. You could keep the number low.
Also, if you have the event queue turned on, some times the work items will stuck in the queues and took a long time for them to be available.
Best Regards,
Jennifer Cha
GRC RIG

Process order should not take part in MRP run

Hello Colleagues
I looking for a way how to exclude not released process orders (we have PP-PI) from MD04 report. Not released process order should not take part in MRP run. I was trying to do it using OPJJ for availability check 02 and checking rule PP but I was not able to get result. Could you please help, probably there are other settings?
Best Regards
Eduard

Hi,
Settings in OPJJ will take effect only when you create or release process orders.
As a work around you can try to exclude process order is
1. Create a Storage location and make it not relevant for MRP-OMIR
2. In Material master for the material in MRP assign storage location MRP as 1 (exclude storage location stock)
3. Create the process order, in the GR tab enter the storage location (not MRP relevant)
In the MRP run it will not take the process order into account.
After releasing change the storage location to the normal sotrage location.
In this process flow, the control is with the storage location.
Check it in your sandbox.
Thanks,
JK

XML Publisher:Concurrent Prg not picking the RTF Template

Hi All,
We developed the rdf report and design the layout and we registred it.when we run the concurrent program program is not picking the RTF template.
We are using the Following version.
Oracle Apps 11.5.10
xml pub is 5.6.2
So please do the need ful, pleaseeeeeeee
Thanks & Regards
Leela

that suggests you haven't got the setup of the data definition and/or the layout template right.
Go into the XML Publisher administrator responsibility and select 'Data Definition'
You need to make sure that when you create the data definition it has the same code as the concurrent program short name and application. This is the connection between the two.
Having create the data definition, click on the 'Templates' tab and create a template. It should connect with the data Definition you have just created.
Now upload your layout template file.
If you have this right, then you will be able to see the layout template from the onsite setting tab.

File Adapter as Sender not picking the files

We configured the File Adapter as Sender, Transport Protocol =NSF and message protocol as FCC.
In OS we have folder to read the file, but SAP XI unable to read the file.
To trouble shoot this issue we copied that file into another location and reverted back to the same location then XI File adaptor is able to read the file.
Now we have compared the Attributes of the path
the only difference in file attributes
Coded character set ID . . . . . . . . :   819
CCSID 819 (decimal)
0333 (hex)
Name ISO 8859-1 ASCII
Description ISO 8859-1: Latin Alphabet Number 1Latin-1 countries and regions
Notes Related CCSID with euro is 923
able to read the file attributes:
Coded character set ID . . . . . . . . :   1252
CCSID 1252 (decimal)
04E4 (hex)
Name MS-WIN LATIN-1
SC Co-existence/Migration
FMS Subset
Registration Date
Description MS Windows, Latin-1
Notes CCSID for this code page with euro is 5348
We have tried to chage the File type as Text and File Encoding with ISO-8859-1even then its not picking the files.
Please suggest me where i am doing wrong here
Thanks,
Venkat.

Hi,
Check the file path & file name , Check the processing mode parameter which you have set?
Check the folder properties & provide all the permission ...
Finally check the communication channel status in RWB, If the problem persist try to stop & start the communication channel again..
Hope it helps...
Regards,
Kumar.

Report not picking the template

Hi all,
I built and registered a rtf template to an Oracle Report(print purchase orders), which is typically run
while approving a PO by selecting the check box (PRINT) in the Approve Documents Form. But Its not picking the
template instead it prints the XML Data. Do I need to call the template through the report trigger.
In other words, How to apply rtf template for the cocurrent report w/ short name, POXPPO? Please Help.
Thanks,
kalyan.
Edited by: kwin on May 21, 2010 6:22 AM

Hi
We had similar issue while submitting BI Publisher report from Shipping transaction form though report is associated with template and data defintion.
To fix we need to another setup through responsibility System Administration > Concurrent Programs > Define query for concurrent program choose update and go to onsite setting tab, In template choose template in LOV after it worked with out any issues. Try similary for this issue it might work. If this doesn't work create forms personalization on approving PO call that step where you can call plsql program, in plsql program you can call template use standard API's before submitting concurrent program
Let me know if this as worked
Thanks
Kamalakar.G

File Sender channel polling successfully but not picking the files.

Hi All,
Can any one please provide any SAP Note Or any Alert mechanism for the File Sender channel in case where the XI channel in polling successfully at a particular folder from Source System but not picking the files. Thanks in Advance for the solution.

Hello,
If you want to know the reason for failure in picking up the file ,You can check the MessagingSystem monitoring for the reason behind failure.
http://host:httpport/MessagingSystem/monitor/monitor.jsp
For Alert may be you can follow prateek instructions.
HTH
Rajesh

Mount-DiskImage in a remote session exeception- Cannot process Cmdlet Definition XML for the following file:

Hi everybody,
I have a strange problem with Mount-DiskImage command.
Environment: Windows server 2012 without any updates.
All scripts signed as it was in Hanselman's blogpost
http://www.hanselman.com/blog/SigningPowerShellScripts.aspx
First script(script1) executing on one machine (server1), then copy another script(script2) to the remote server(server2) and run script2 in a PS-Session. Both are signed. Certificates are located on both servers.
In a script I tried to
Import-Module Storage
$mountVolume = Mount-DiskImage -ImagePath $ImageSourcePath -PassThru
where ImageSourcePath is a networkpath to iso image.
But getting exception.
Exception Text:
Cannot process Cmdlet Definition XML for the following file:
C:\Windows\system32\WindowsPowerShell\v1.0\Modules\Storage\Disk.cdxml. At line:138 char:17
+ $__cmdletization_objectModelWrapper = Microsoft.PowerShell.Utili ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Executable script code found in signature block.
At line:139 char:17
+ $__cmdletization_objectModelWrapper.Initialize($PSCmdlet, $scrip ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Executable script code found in signature block.
At line:143 char:21
When I look into the C:\Windows\system32\WindowsPowerShell\v1.0\Modules\Storage\Disk.cdxml I didn't get what's happend, because in line 138- was xml comment.
Any ideas?

Hi,
I suggest referring to the following links:
http://blogs.msdn.com/b/san/archive/2012/09/21/iso-mounting-scenarios.aspx
http://blogs.technet.com/b/heyscriptingguy/archive/2012/10/15/oct-15-blog.aspx
Best Regards,
Vincent Wu
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Phases/operation in process order does not exist

phases/operation in process order does not exist this error coming when cor6n is using.why?

HI
After creating Master recipe in C201, under the operations tab you need to define the operations involved in recipe . along with the operation column there is phase indicator column is there which is to be selected whether this operation is phase or not...
Check and revert
Regards
Anupam Sharma

Process Order is not picking the follow-up material

Similar Messages

Maybe you are looking for