Process order system status PPRT
Hi all
Could you please suggest how the process order status PPRT will generate instead of PRT. What could be the reason. Can we make the status to PRT by using any program or any other method. Could you please suggest.
Thanks in advance
sap2009
Dear JH
Thanks for your reply. we are using ECC6.0 version. We are using Z program to print the recipe. This program will check if the process order have status REL PRT then the recipe will print. otherewise the program will not move forward to next line if the system find the status REL PPRT.
If we do TECO for this order, then we can able to print the recipe if the next order status REL PRT, other wise same problem.
could you please suggest.
thanks in advance.
sap
Similar Messages
-
Hi All,
we want to change the sales order system satus, then we found we can only do it in item level.since in one sales order we may have many items, if we change the system status by manually one item by one item, it cost time, I wonder in SAP 6.0 if we can do batch change sales order system status? If have, please tell me how to do it?
Regards,
JaganHi Raj,
Thank you for the reply.The problem here is there are 100 line items in a sales order and user wants to change the item status (in the status tab in item level data) from A3-A4 ( example here is A0-SO created,A1-SO changed,A2-SO released,A3-PO created,A4-Delivery created,A5-SO closed) for all line items.In this Sales order 10 line items have not got the Goods receipt.But all other items have got.So he dont want to go to each and every line item to check and update the status of the GR,since it is time consuming process.So he is looking for the possibility in the header level like when he update the status in Heder level,it has to change the status in item level or if any item is not relevent for status change from A3-A4 (means the item present status is not in A3) it should throw a message.
Regards,
Jagan -
While creating Process Order system has to validate the Batch field
Hi All,
While creating the Process Order system has to validate the Batch field which comes under Goods Receipt tab. Please let me know is there any standard user-exit is there for this requirement.
Regards
NaveenDear Swapnil,
Thanks for the reply,
At the time of creation of process order I am entering the External Batch no as per the logic i.e. first two letters as 08 (for year), next two letter as section 51 (for solid mfg section, which i am planning to maintained in the Z table) and last three letters as 001 (for serial no in this section). so batch no is 0851001.
Now i want to validate these all letters as per the above logic i.e first two letter should be cross check with current year, and next two letter with Z table for section and last three letters for sr no with previous batch, which is already created for this section.
Now can you please help me to find out the function exit or screen exit to validate the above requirement at the time of creation of process order i.e. COR1, under the Goods receipt tab.
Thanks in advanced
Naveen -
Reg Update Order System Status
Hi,
My requirement is, while doing TECO (technical complete) of maintenance order I want to check for open reservation/requisition in maintenance order. and if we found any any open reservation/requisition then order status TECO will not update. maintenance order will remain in present status. any other update done in this order before TECO will save.
Please suggest how I can acheive this.
I tried to use uesr exit IWO0009 and BADI WORKORDER_UPDATE but not abe to update order system status in this point.
Please suggest me any EXIT or BADI or Solution for this requirement.
Regards,
AtulHi Atul,
Following codes can be help u for Open PR before TECO.
*& Include ZXWO1U03
EXIT_SAPLCOIH_004
DATA: BEGIN OF IT_EBAN OCCURS 0,
BANFN LIKE EBAN-BANFN,
BNFPO LIKE EBAN-BNFPO,
EBELN LIKE EBAN-EBELN,
LOEKZ LIKE EBAN-LOEKZ,
END OF IT_EBAN.
DATA: IT_AFKO LIKE AFKO.
DATA: BEGIN OF IT_AFVC OCCURS 0,
BANFN LIKE AFVC-BANFN,
END OF IT_AFVC.
DATA: X_AUFPL LIKE AFKO-AUFPL,
X_BANFN LIKE AFVC-BANFN,
STR TYPE STRING.
SELECT SINGLE AUFPL
FROM AFKO
INTO X_AUFPL
WHERE AUFNR = CAUFVD_IMP-AUFNR.
IF SY-SUBRC = 0.
SELECT SINGLE BANFN
FROM AFVC
INTO X_BANFN
WHERE AUFPL = X_AUFPL
AND STEUS = 'PM03'." Extenal Service Control Key"
SELECT BANFN BNFPO EBELN LOEKZ
FROM EBAN
INTO TABLE IT_EBAN
WHERE BANFN = X_BANFN.
ENDIF.
LOOP AT IT_EBAN.
IF IT_EBAN-EBELN = '' AND IT_EBAN-LOEKZ = ''.
CONCATENATE 'PR' IT_EBAN-BANFN 'is not converted to PO.TECO is disallowed' INTO STR SEPARATED BY SPACE.
MESSAGE STR TYPE 'E'.
ENDIF.
ENDLOOP. -
While creating process order system asking for a.c assighnment
While creation of process order system is asking for Account assighnment sales order
pls suggest how to avoid this.Dear,
Maintain following by given root,
Go to SPRO>IMG>SD>BASIC FUNCTIONS>ACCOUNT ASSIGNMENT/COSTING >MAINTAIN REQUIREMENT CLASSES FOR COSTING / ACCOUNT ASSIGNMENT
Here you can maintain the Req. Class with Account Assignment Category wrt Costing.
Regards
Ajit k Singh
happy to help u -
Hi.Regarding process order APNG status
Hi All
Could anyone explainhow and when a APNG system status is triggered for a process order.Hi,
Please refer,
http://saphelp.border-states.com/EN/89/a42dbc461e11d182b50000e829fbfe/content.htm
In transaction coR4 for the plant & order type , in master data tab page under recipe "approval required" setting is maitained.
Regards,
Senthilkumar -
How to control the Business Processes of System Status in Proj. Def.?
Dear Experts,
When a Proj. Def. is in "Business Complete" System Status (CLSD), I would like to control no data is allowed to be changed, except undo the CLSD.
In SPRO, I could onlly fine the similar setting in WBS status profile, but could not find system status profile for me to define and set which business processes is/are not allowed.
Is there anyone know how to do so please?
Thanks & regards,
James ChanDear Ivanna,
Really thanks for your swift reply.
In my system, when a Proj. Def. is in "CLSD" status, many of the fields are not grey-off for display only.
Instead, most of the fields are allowed to change.
In CJ20N, when I check on the "Transaction Analysis" of a project's status after "CLSD", I can see the "Create Change Document" is "Allowed".
Is that the cause why most of the fields are allowed to change?
How can I make it as "forbidden"?
Thanks & regards,
James Chan -
Production order system status after being settled
Hello,
I am currently in ECC 605 project. I remembered once production order is variance calculated and settled,new system status, VCAL , is set at production order. And sometimes the production order won't be set with status VCAL even though it's variance calcualted. Does anyone have any experience at ECC release 605? Is it normal that settled order doesn't possess VCAL status?
And another weird behavior is that production order can be settled without variance calculated. At earlier release, system will
pop up error message if I try to settle a production order which isn't variance calculated. Can anyone confirm if at release 605 it's normal system behavior that system won't block order settlement of production order which variance calculation isn't done yet?
B. Regards,
Nancy
Edited by: Nancy Lin on Jul 14, 2011 9:45 PMHi Rose,
Try out ..
STATUS_READ
http://www.sap-basis-abap.com/sappp016.htm
Re: Status of the Production Order
Re: Production order status
Hope it will solve ur problem
Thanks & Regards
ilesh 24x7 -
Hi Guru,
i am preparing a report in which in selection screen we have selection profile status (same as cooispi) .Now the process orders has to be filtered on the baisi of this profile status. I have debug the tcode COOISPI but could not get the logic.
have checked through tables JEST, TJ49.JSTO ect but could not get the right logic . please help
Regards
Aditya ShrivastavaHello
Use follow logic:
1. Select records from AUFK
2. Call function 'STATUS_READ' with OBJNR = AUFK-OBJNR. You will have table with all status for this order.
If any status of order in selection-screen, then put this into final table, else delete this. -
Changin work order system status via FM BAPI_ALM_ORDER_MAINTAIN
Hello,
I've succeeded to change work order user status via FM BAPI_ALM_ORDER_MAINTAIN.
Is it also possible to change the system status with the same FM?
Thanks
MosheCheck STATUS_CHANGE_INTERN_MULTI & STATUS_CHANGE_INTERN
-
How to reset Work Order System Status -NCMP Not completed
Hi Friends,
Please can anyone guide me how do I reset / revert the NCMP (Not completed) System Status of the Work Order. The System Status comes after I have done the Function of "Do Not Execute".
Thanks in Advance.
AnantHi,
1. You cannot reset it back . For future cases ensure to grey out the option using Transaction Variants SHD0 for IW31/IW32 Tcodes
2.Steps to create transaction variant http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40d1443e-0184-2c10-c68d-c612f771fe6f?quicklink=index&overridelayout=true
3.You can also explore user exit :IWO10026 User check on setting status 'Do not perform'
regards
pushpa -
SET PM WOrk Order System Status to TECO
Good Afternoon SAP PLM Forum users,
Will you please tell me the best method to Technically complete (set system status to TECO) 85,000 PM orders that have system status REL and CNF or PCNF.
Thanking you in advance
LeslieHi,
You could use IW38 to select and generate a list of orders. Then from the output screen highlite a group of orders and choose the complete function.
Also BAPI_ALM_ORDER_MAINTAIN method TECHNICALCOMPLETE could be used with later releases.
-Paul
Thread moved to EAM forum -
Internal Order - System Status LKD
Hi All,
For an internal order which has system status LKD active, can I mark it for deletion?
When tried to do so, I get an error message like
" E BS 013 System status LKD is active (ORD XXX)
KO 424 Order XXX / Mark for deletion "
What can be done?
Thanks ,
JananiHi,
if your order is marked for deletion then you can't put it for locked status and it goes other way around i.e. if your order is lkd ,it can't be marked for deletion.
Reward points if it helps.
Regards
Karan -
Production Order System Status
Hi Experts,
What table is used to store the System Status of an Order? Is it with CAUFV?
Scenario is i need to extract ACTIVE Production Orders with CRTD status. DO i just select CRTD or do i need to consider other parameters as well, like deletion flag, teco etc?
Thanks guys!Manoj,
Give below code snippet to your aBAPER:
Retrieve the status of the orders
SELECT objnr stat
FROM jest
INTO TABLE i_jest
FOR ALL ENTRIES IN i_objnr "cONTAINS Prod Order Number
WHERE objnr = i_objnr-objnr
AND stat = I0001
AND inact = ' '. "Inactive flag
Check if the order is currently in the status Cretaed
LOOP AT i_jest.
CALL FUNCTION 'STATUS_CHECK'
EXPORTING
client = sy-mandt
objnr = i_jest-objnr
status = i_jest-stat
EXCEPTIONS
object_not_found = 1
status_not_active = 2
OTHERS = 3.
If sy-subrc = 0.
"Order in created status
else
"order not in created ststus
endif. -
Work order-System status table
Hi,
In which table does the system status of the work order (TECO, Created, Released etc) gets updated? I want to know in which table does all the open work orders get updated.
Thanks in AdvanceDear Jegashree,
Check this link
[Production order status|Table : Production order status;
Regards
Madhu
Maybe you are looking for
-
Cant install software from disk. Terminal window opens with a logon and bash message?
I cannot install software from disk & in some cases download. If any software disk is inserted the terminal window appears. The Disk has to be clicked to open the contents but install files or package files show as a blank doc and not the usual yello
-
Hi guys. I am bit struct need bit help in the below query... I have one barcode something like this...'11064626|04549580|04549580-0004|NWR|000027.535' now i have to slipt the above information using the query using the pipe character... x=11064626 y=
-
I have a question for everyone regarding foreign trade Purchase Orders. Does anyone know if it is possible in SRM 5.0 to purchase items from a non-United States vendor in a US shopping cart? (using a US delivery plant) I was wondering if this is avai
-
Deleting email mail box in the messaging folder 61...
does anyone know how to delete extra email mail boxes that have been manually set up by me in menu - messaging - the screen has new message inbox my folder email gmail Gmail the last 3 i have set up and I don't want/need them there - there is no harm
-
Problem of native installer of Adobe Air
The native installer will display an error as shown in the screenshot. But the native installer can execute normally after install A ir 2.0 public Beta First. Therefore, I think that the problem is not the system requirements problem. How can I run t