Process order - The hour details are not being pulled through

Hi friends,
Details of Issue:
COR3 - Our Production Department have entered hours into COR6N as usual but these hours are not pulling through to the actual section in costs analysis screen.
Reason:
CORT - Process order xxxx , counter 36 & 37 - indicates hours are captured during process order confirmation.
and
C203 - We have found that the Activity Type ZFOH07, which is showing the consolidated value of all the other activity types like ZLBR06, ZVOH06 & ZFOH06, in cost analysis report. In the process order xxxx master recipe xxxx is being used, in which this single activity type ZF0H07 is assigned multiple times. Hence after the confirmation of the process order, all values related to other activity are following into a single activity type ZFOH07.
Solution:
C202 - However, when I tried to change the Master Recipe, it is not in disply mode.
CORS, COR2 - Without make the changes to recipe, how can we proceed to cance all comfirmations and read PP master data in process order.
Regards,
Venkata Raju

hi
use CORS - Cancel

Similar Messages

I am not being able to create my apple ID as my card details are not being accepted by the app store. i tried with my visa card as well as master card. help me out to solve the problem..

I am not being able to create my apple ID as my card details are not being accepted by the app store. i tried with my visa card as well as master card. help me out to solve the problem..

Were the VISA and MasterCard issued to you by a bank in the country where you reside and do they have a verifiable billing address in the same country?
Or are these debit cards that you bought in a local store. Apple does not accept debit cards that you bought.

I just switched from Outlook to Mail and now the sent messages are not being displayed. Help, please.

I just switched from Outlook to Mail and now the sent messages are not being displayed. Help, please.

Back up all data. Rebuild the mailbox.

Assessable value and the Excise details are NOT coming in MIGO

We are facing problem that assessable value and the Excise details are NOT getting populated automatically when doing MIGO in IN03 plant.We have a STO from a DC to plant. We created the outbound delivery and then captured the excise invoice using J1IJ.In migo we give the reference of this excise invoice in the excise invoice tab then the values calculated should flow in MIGO.This is not happening and user have to manually calculate the tax and put in the system.
I have followed the following steps
1. Create STO PO ME21N
2. Create outbound delivery using VL10B
3. Do the PGI using VL02N
4. Capture the exice invoice using J1IJ in depot
5. Do MIGO and give the reference of the excise invoice created

Hi,
In STO, your supplying plant is your Vendor for the receiving plant. Hence, you have to maintain the supplying plant as vendor also. Pl. check in table J1ID that the vendor data is maintained for the supplying plant.
Regards,
Prashant

Find the cubes that are not being compressed

Hi,
Need to find the cubes that are not being compressed.
Please let me know how to find them? is there any tran codes to figure them?
Thanks,

Hi
E fact tables name >> /BIC/E*
F Fact tables name >> /BIC/F*
By comparing the two list
can we find the uncompressed cubes?
If this is right it gives one more solution to your problem...
Thanks

Some Of The Following Drivers Are Not Being Inslled On The Notebook

As the topic says, i have an Envy 6 1002TX laptop and in this laptop some of the drivers are not being installed while they are available in the download lists of drivers for the same laptop.
Product Number::B4P24PA#ACJ
OS::Windows 7 Ultimate x64
Here are thelist of Drivers that aren't working:-
1.Intel Smart Connect.
2.Intel turbo Boost.
and the Chipset drivers installation has readme file and installation instructions missing, see this:-

Hi
Please find the link given below might help you to fix your issue. Download both driver chipset and have it checked.
Intel Turbo Boost Technology Driver
Driver Chipset
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

How do I delete places in the organizer that are not being used?

In Elements Organizer 12, I think I accidentally created a "place" on the map that I do not want to apply to any photos. When I try to do conduct an advanced search, the place is appearing as a checkbox. I do not want this place to show up in the search field, as we have never been there. How do I remove places that are not associated with any photos?

If you are accessing emails from multiple devices, you are better off using the IMAP protocol. Then the devices sync with the server and they are all looking at the same information. With POP, you are going to get your emails spread about, some on Outlook, some on the iPad. It could get very confusing.
By default, the iPad will not delete from a POP server. Instructions for changing this are here: http://support.apple.com/kb/HT3228

How to remove the bufgs that are not being used

Hi,
I have a IP block that has BUFGs that may or may not be used depending on which design the IP block is used. If they are not used I would like them to be removed but the tools are not consistent, sometimes they remove them and sometimes they do not.
How do I specifically tell Vivado to remove a BUFG in the .XDC file?
I've seen someone suggest to use the following attribute in the VHDL file but I need something in the XDC file
attribute buffer_type of drck_i : signal is "none";
Thank you,
Luis

Hi
If the BUFG instance is instantiated in the IP or your design then the buffer_type attribute will not work.
The opt_design trims the unconnected instances during implementation. Ensure that the BUFG does not have DONT_TOUCH property set on it which might affect trimming.
Thanks,
Deepika.

Cannot compile form.. the PLL's are not being recognized

I'm in the Oracle Forms tool and have a form that I'm trying to compile. The PLL's are in the same directory. I get lots of error messages saying it cannot find the functions within the libraries. I've got around some of this by copying the funcitons I need under the program units in the form but I should need to do this. The compiler should find the functions in the PLL's.
Thanks, Scott

Hi!
You have to attach the plls to your form.
For this click in the navigator on the Attached Libraries node.
Click add (green {color:green}*+*{color} button in the left toolbar).
Click browse and search for your first pll in the open dialog.
Click Attach and then click Yes in the Remove path dialog.
Repeat the above steps until all plls you need are attached.
may first remove the copied program units from the form.
Then press ctrl-shift-k to compile all pl/sql in your form and check for errors.
Regards

My emails are not being sent through my Stratosphere.

I am sending emails and the recipients are not receiving them. I have sent a test message to myself with the same results. I use MSN/Hotmail as my main email provider with also having Gmail synced. I can receive emails but when I send they never get to their destination. I have had my phone for just under 2 weeks. Any advice?

Hi Marrelam!
Oh my! I am sorry to hear that your device is not sending emails. I know how important this feature is, and I will certainly get this resolved for you. Is this only your MSN account that is not sending mail? Have tried using gmail? There is an Hotmail application in the Google Play Market that can be downloaded as well. You can also check the Outgoing E-mail settings on the device to make sure you have the correct setup of the email account:
Outgoing Mail Server Name: smtp.live.com
port 587 (either SSL or TLS depending on client being used)
Username requires full email address (e.g. [email protected])
Password is the Windows Live ID password.
Keep us posted!
Thanks,
Pamelaf_vzw

Changes made to the service ticket are not being saved.

Hi Gurus,
Can anyone please help me out ?
There is a problem while updating the service ticket and saving it.
Its allowing the changes however when trying to "save " . The "please wait" icon is displayed briefly indicating work has been saved. I then click on the "Service ticket" box to bring up the "Service Criteria" box in order to start the process all over again.
When I go back and check the data of the "saved " S.ticket its is either partially saved or not saved.This is not happening to all end users of CRM but one person and she is being doing this job for years.
Please suggest what should be done.Early the better.
Thanks to one and all,
R.....

You need to explicitly refresh the tables. In the Mapping Workbench, select or multi-select the tables you'd like to refresh, right click on them and choose "refresh".
IF you are doing that, and not seeing the changes, then the most likely issue is that you are connecting to a different database and/or using a different JDBC login.
- Don

All documnet numbers are not being pulled by COPA data source

Hi,
We have a COPA datasource(cost based) and its not pulling some of the document #'s. We have some enhancement code. We tried to debug these particular doc #'s in RSA3 and found that the records are getting dropped even before reaching our enhancement code but can not exactly find where/why they are getting dropped.
Any inputs?
Thanks,
Kim

Problem solved.

After upgrading to OSX Mavericks, my Contacts app on my desktop not syncing with iCloud and changes I make on my iDevices are not being updated through system.

In the desktop Contacts apps, there is an error icon always present (since the upgrade) in the upper left hand quadrant of the app window. When I click on it I get an error msg. See Screen grab below.

"On my phone" by definition doesn't sync. You need to move it to an iCloud group. Unfortunately, the Contacts app on the iPhone doesn't have this capability. There are 3rd party apps that let you move contacts from one group to another. Speed Names is a good choice, and inexpensive.

Reversal documents are not being represented when 0PY_PP_C3 is being loade

We use the 0HR_PY_PP_2 and 0HR_PY_PP_1 infosources to load the 0PY_PP_C2 and 0PY_PP_C1 ODSs. Then 0PY_PP_C1 updates the 0PY_PP_C3 ODS.
Routines in the update rules include corresponding data from 0PY_PP_C2 during the update of 0PY_PP_C3. If there is no matching data in 2, then the corresponding records in 1 do not go into 3 Our process chain first loads 2, after it activates, it then loads 1, then updates 3.
There are 5 reversal documents are in 0PY_PP_C2.
The Update rules between 0PY_PP_C1 and 0PY_PP_C3 refer to the Posting Documents ODS: 0PY_PP_C2.
The issue is that the reversal documents are not being represented when 0PY_PP_C3 is being loaded.

Hi,
The simple solution is to debug the code written in the routine, as you mentioned that you already have some data in PP_C2 then check if that data is properly getting read in routine.
After that check the condition based on which you are skipping records of PP_C1 and not loading into PP_C3. Is your condition perfectly working fine?
Put a break point and check how the data is flowing.
Regards,
Durgesh.

Data are not being applied at destination side

Hi all,
I have implemented real time streams replication(not archive log based downstream replication).
source:9.2.0.8.0
destination:10.2.0.2.0
Capture and propagation is working fine. DBlinks are also fine. Apply process is running , but data are not being applied in destination side.
The trc file shows this:
Dump file /dev1/visdb10/10.2.0/admin/VIS_wbsebdev1/bdump/vis_p001_14628.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /dev1/visdb10/10.2.0
System name: Linux
Node name: wbsebdev1
Release: 2.4.21-32.ELsmp
Version: #1 SMP Fri Apr 15 21:17:59 EDT 2005
Machine: i686
Instance name: VIS
Redo thread mounted by this instance: 1
Oracle process number: 21
Unix process pid: 14628, image: oracle@wbsebdev1 (P001)
*** SERVICE NAME:(SYS$USERS) 2008-05-29 11:39:26.957
*** SESSION ID:(388.16) 2008-05-29 11:39:26.957
The Alertlog file shows at the end this:
Thu May 29 11:19:06 2008
Streams APPLY A001 with pid=16, OS id=9531 stopped
Thu May 29 11:21:25 2008
Incremental checkpoint up to RBA [0x746.d359.0], current log tail at RBA [0x746.d471.0]
Thu May 29 11:39:26 2008
Streams APPLY A001 started with pid=18, OS id=14624
Streams Apply Reader started P000 with pid=20 OS id=14626
Streams Apply Server started P001 with pid=21 OS id=14628
Thu May 29 11:41:33 2008
Incremental checkpoint up to RBA [0x746.11565.0], current log tail at RBA [0x746.121b9.0]
Pls help.
Thanking You,
Nitesh.

Problem solved.

Process order - The hour details are not being pulled through

Similar Messages

Maybe you are looking for